Zen Micro wont charge when connected using

I've reacently discovered that my Zen Micro isn't charging any more, when I connect it to my computer (or any other computer for that matter). When it's connected, the battery indicator switches from battery-status to battery-charging - however, regardless of how long I let it charge, it shuts down immediately when the cable is unpluged. So it doesnt charge at all!
I'm having a bit trouble finding my regular charger, so I have a bit of a problem here..
Has anyone besides me experienced this? And they might have a solution?
P.S.
The USB port it is connected to has its own power supply, so its not that it doesnt get enough power..

i got the resolution.
rasta maybe the drivers haven't been installed. (but it's strange cuz it should have been recognized as an hard disk)
by the way try this following took from support pages:
. Click Start, (Settings), Control Panel, System, Hardware, and then Device Manager.
2. The MTP player should be listed under Windows Portable Devices.
If there is an error or a yellow exclamation mark next to the device, right click the player listing and select Update driver. (insert the CD and select "automatically detect" drivers from the CD)
Alternati'vely, you can uninstall the device, and reinstall it. Highlight the MTP player listing, and press the Delete key on your keyboard, which will uninstall the MTP device; click Actions ,and then click Scan for hardware changes. Windows will install the necessary drivers.

Similar Messages

  • Ipad wont charge when connected to laptop but charges when connected to wall outlet

    ipad wont charge when connected to laptop but charges when connected to wall outlet

    The quickest way (and really the only way) to charge your iPad is with the included 10W or 12W (5W on Mini) USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (2.5W, most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
    Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
    How to Calibrate Your Mac, iPhone, or iPad Battery
    http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
    At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
    Also, if you have a 3rd generation iPad, look at
    Apple: iPad Battery Nothing to Get Charged Up About
    http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
    Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
    http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
    New iPad Takes Much Longer to Charge Than iPad 2
    http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
    Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
    Extend iPad Battery Life (Look at pjl123 comment)
    https://discussions.apple.com/thread/3921324?tstart=30
    New iPad Slow to Recharge, Barely Charges During Use
    http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
    Best Practices for iPad Battery Charging
    http://www.ilounge.com/index.php/articles/comments/best-practices-for-ipad-batte ry-charging/
    Tips About Charging for New iPad 3
    http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
    How to Save and Prolong the battery life of your new ipad
    https://discussions.apple.com/thread/4480944?tstart=0
    Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
    http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
    iPhone, iPod, Using the iPad Charger
    http://support.apple.com/kb/HT4327
    Install and use Battery Doctor HD
    http://itunes.apple.com/tw/app/battery-doctor-hd/id459702901?mt=8
    To Extend a Device’s Battery Life, Get to Know It Better
    http://tinyurl.com/b67c7xz
    iPad Battery Replacement
    http://www.apple.com/batteries/replacements.html
    In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
     Cheers, Tom

  • My ipad wont charged when connected to laptop. HELP?!!!

    my ipad wont charged when connected to my laptop. Anyone know how to fix that. thanks, much appreciated
    Also, just noticed this now....i have it connected and its got no battery. It will shut off like it died (while connected to the laptop) and then after a few minuted it will turn on. with the battery icon saying "not charging"

    Chances are your USB port is charging but only when the screen is off. This is e behaviour i get from our pcs.
    Make a note of the battery level, plug it in and make sure the screen is off, after and hour check the battery level.
    It should have charged a bit but very, VERY slowly.
    Your computer port normally only delivers 500mha of power. Some modern macs deliver 1100mha. Anything less than 1000mha wont charge with the screen in.
    The iPhone charge delivers 1000mha and the iPad charger delivers 2100mha.
    So it not charging via the computer is normal.

  • Ipod wont charge when connected by USB

    My ipod doesn't charge when i connect via USB but will charge on Firewire..?? is this normal??

    My ipod doesn't charge when i connect via USB but
    will charge on Firewire..?? is this normal??
    I assume that you are referring to the ipod being plugged into your Mac when charging. The Mac cannot be in "sleep" mode if you want to charge the ipod by plugging into USB. However the Mac can be in "sleep" if you plug into the Firewire port. The reason is that the FireWire port is powered while the USB is not when the Mac is asleep.
    BTW you can charge via the USB 1 and not just USB 2. I have a 4G ipod that will charge when connect to my older iBook (2002 model) that only has USB 1.
    iBook   Mac OS X (10.4.3)  

  • Zen Micro wont charge using USB

    Hi,
    Can anyone help me. I have just purchased a Zen Micro and a Zen Touch. The Touch works fine. My wifes micro on the other hand is not - there was no charger in the box. I was under the impression that it can also charge using USB, but my machine (which is quite old btw - P4 650mhz Gateway) does not recognise it. Is it a problem with my machines USB, or is it more likely to be a problem with the Micro? I have purchased a Charger which should be around in the next couple of days (thinking it may need to be charged using a charger on the initial charge).
    Any help would be appreciated,
    Thanks in advance,
    Steve

    Do you know what firmware your wife's Micro has? (Check System > Information from the Micro's main menu to be sure.) Also, what Windows version (and service pack, if any) do you use?
    Do you plan to use "to go" subscription services with the Micro? Current "to go" services include:
    FYE Download Zone (US only)</LI>
    HMV Digital (UK or Ireland)</LI>
    Napster To Go (US, Canada, or UK)</LI>
    Rhapsody To Go (US only)</LI>
    Virgin Digital (UK only; US version doesn't support "to go")</LI>
    Yahoo! Music Unlimited (US only)</LI>
    For the Touch, did you install the drivers from the CD, or download the latest drivers from here? You probably should download the new driver (unless you have 2.x Micro firmware with WinXP SP or 2) to be sure it will support the Micro too.
    Are you connecting the Micro directly to your PC, or thru a hub? If to the PC, is the USB connection you're using on the front or the back of the PC? It's best to connect to a USB jack on the back of the PC if possible, not to a front jack or hub (especially an unpowered hub which won't charge the Micro). It's also possible that the Micro has issues with your PC's USB configuration; you may need to buy a separate USB card (preferably USB 2.0--you probably have USB . jacks).Message Edited by RBBrittain on 09-05-2005 07:09 PM

  • Zen Micro wont charge via USB on first

    Hey guys,
    <EM>'ve had a look at alot of posts regarding charging Zen Micro's but none have thus far solved my problem.</EM>
    <EM></EM>
    <EM>I used to have a Zen Micro Photo but it broke and I've had it replaced with a Zen Micro (6GB) with firmware ..0</EM>
    <EM></EM>
    <EM>I have so far been unable to get my Zen to charge from a laptop. I have tried the following:</EM>
    <EM>* Cleanup from Recovery mode</EM>
    <EM>* Connect player whilst locked</EM>
    <EM>* Removed and replaced battery</EM>
    <EM>* Updated drivers on windows XP (my OS)</EM>
    <EM>* Installed software on 2 laptops and had exact same results</EM>
    <EM></EM>
    <EM>My zen is now dead battery wise, when I plug it into the computer it turns on and gives my a screen that says Low Battery. Not once have I seen the charge symbol appear when it was connected to the laptop.</EM>
    <EM></EM>
    <EM>When I do connect it it is seen as a MTP device on windows, and now Creative MediaSource does not recognise it as connected.</EM>
    <EM></EM>
    <EM>I had similar problems with my Micro Photo but they worked themselves out somehow (I dont remember how), its getting really frustrating and I'd appreciate any help.</EM>
    <EM></EM>
    <EM>Cheers guys!</EM>

    Maybe if it doesn't recognize it, you might have to install the software again (the CD that came with it).
    -Sara

  • HT1369 My ipod touch wont charge when connected to my cable in my laptop and it wont show the charge symbol it charges but REALLLYYYYY slow plz help

    Ipod wont charge with cable neither will the charge symbol show up ive tryed using a diffrent cable and a plugin-in charger but still no hope D:

    - See:       
    iPod touch: Hardware troubleshooting
    - Try another cable
    - Try another charging source
    - Inspect the dock connector for bend or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
    - Make an appointment at the Genus Bar of an Apple store.
    Apple Retail Store - Genius Bar

  • TS3274 My iPad wont charge when I connect it to power

    My iPad wont charge when I connect it to power. I have restarted it but the problem seems to be that it doesn't recongise the actual charger. Any ideas?

    First ensure you are using a 10 watt/2 amp charger if you are not using the one included with the iPad. Then I would try a new sync cable. You can then test the charger by connecting another USB based device such as an iPod or iPhone to it to see if it charges. If the iPad is completely dead it may require some charge time before it will become responsive. If the sync cable and charger work fine with other devices you iPad is probably defective and requires repair.

  • My ipod touch 4 generation wont charger or connect to my computer but it will charge using a wall charger. The battery was dead so I plugged it in to the Computer and it charged it enough to come on and now that it is on, it wont charger or register.

    My ipod touch 4 generation wont charger or connect to my computer but it will charge using a wall charger. The battery was dead so I plugged it in to the Computer and it charged it enough to come on and now that it is on, it wont charger or register. My sister has the same ipod as me and has no problems charging hers on our computer. Please Help me!!

    Try:                                               
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable       
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • My iPad 2 wont charge when its connected to my computer

    Hi,
    My iPad 2 wont charge when its plugged i to my comp(Windows 7 Laptop) it only charges with the wall socket.
    Why?
    Thanks!

    The current provided by most USB ports on computers is not sufficient to charge the iPad. It may charge but the not charging icon will show, and the charge rate will be quite slow.
    Stedman

  • Zen micro not charg

    Hi guys, I looked thru the FAQ and previous postings but can't seem to find anything on this problem. Anyways, I can't seem to get my zen micro to charge via the wall charger even though the battery is near dead, no bars. The micro just acts as if it isn't plugged in at all. I tried using a power strip to try to 'jump' start the battery as suggested as well as keeping the hold on when charging but nothing seems to work. I'm currently on a long trip without my usb connector so I can't try connecting to a computer. Does anyone have any suggestions as to what else I can try to get this thing charging? Thanks.Message Edited by ppong828 on 08-26-2005 03:23 AM

    thx ssr for the suggestion. fortunately i'm living with someone who has a multimeter but unfortunately I'm not so great with this sort of electronical testing. I'm not exactly sure how to use one to test the usb end of the wall charger for the output voltage since the output end is so small but I couldn't get any reading. Also, I couldn't get a resistance on the input end so maybe that means that the wall charger may have shorted out. thx again for your help.

  • Nano wont charge or connect with USB but will with firewire.

    My nano has been acting CRAZY. When I hook it up to the firewire charger it charges, but of course it wont sync. It holds the charge fine. If I hook it up with the normal charger it does NOTHING. It wont charge or connect to iTunes. What did I do? Also, I use the same cable to do my iPhone. It worked great for both. Then it quit for the nano.

    Well,
    You probably didn't have iTunes open (if that's where it syncs from).
    If that' right, then when you want to charge or sync from your iPod, make sure iTunes is open.
    This should help, but if you already did this, I'm sorry. I have no advice.
    Cheezy107

  • Nano wont charge or connect.

    My nano has been acting CRAZY. When I hook it up to the firewire charger it charges, but of course it wont sync. It holds the charge fine. If I hook it up with the normal charger it does NOTHING. It wont charge or connect to iTunes. What did I do?

    Welcome to Apple Discussions.
    Crackling and buzzing sound? Kind of worrying as this may indicate hardware malfunction. In that case you may need to take it to an Apple Store (if there is one) to let them check on it.
    Can you borrow or get an iPod USB AC charger and use that to try to recharge the iPod?

  • HT4060 My iPad wont charge when plugged into a computer, the battery isn't lasting long, and its getting hot when charging

    My iPad wont charge when plugged into a computer, the battery isn't lasting long, and its getting hot when charging

    The quickest way (and really the only way) to charge your iPad is with the included 10W USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
    Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
    How to Calibrate Your Mac, iPhone, or iPad Battery
    http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
    At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
    Also, if you have a 3rd generation iPad, look at
    Apple: iPad Battery Nothing to Get Charged Up About
    http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
    Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
    http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
    New iPad Takes Much Longer to Charge Than iPad 2
    http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
    Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
    Extend iPad Battery Life (Look at pjl123 comment)
    https://discussions.apple.com/thread/3921324?tstart=30
    New iPad Slow to Recharge, Barely Charges During Use
    http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
    Tips About Charging for New iPad 3
    http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
    How to Save and Prolong the battery life of your new ipad
    https://discussions.apple.com/thread/4480944?tstart=0
    Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
    http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
    iPhone, iPod, Using the iPad Charger
    http://support.apple.com/kb/HT4327
    Install and use Battery Doctor HD
    http://itunes.apple.com/tw/app/battery-doctor-hd/id459702901?mt=8
    In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
     Cheers, Tom

  • Ipad wont charge or connect to pc

    my ipad 2 wont charge when i plug it in to an outlet. it also wont connect to my pc. i have tried doing a reset. (holding down the power button and home key). didnt work. any suggestions?

    Not normal. Take it to an Apple Store for evaluation.
    Make a Genius Bar Reservation
    http://www.apple.com/retail/geniusbar/
     Cheers, Tom

Maybe you are looking for

  • How to create a new field for Q3 - QM notification in Header and item level

    Dear All, l            Sub: How to create a new field for Q3 - QM notification in Header and item level Ref. the link --> Quality Notification We want to create a new field in header level and item level. As per the thread the solution is given below

  • Dynamic List and Security Issue

    Hi I have a Dynamic List Wizard for orders, which the user can click on edit to edit or modify the order and if the user choose "Yes" to submit ( the order form has a submit filed which has Yes / No Values)then the EDIT button disappear and the user

  • How to find which tables are being used by a workbook.

    I was asked by the client to generate a report which will show the Workbook name and it's corresponding tables/views. Any idea on how to use the EUL tables for this purpose. I know the SQL query to find the tables in case the workbook was run at leas

  • Multiple Selection button on selection screen called in Screen Painter

    Hello ABAPers I have included selection screen(1100) in a subscreen area of a screen in module  program. The user's requirement is that there should be some gap between input field of a select options and multiple selection button. Though the screen

  • Can't open msg server in console

    When I launch the console, I can see the messaging server, but can't open it. The error message is "Can't set uid and gid". What could be the possible cause? Thanks