Zen Micro wont work at all plz help, or im gonna return

When i charged my zen micro, i turned it on, and then it displays the title screen: Creative
Then it just stays there, how long is it supposed to take to load?Message Edited by Kyler on 07-3-2005 05:08 AM

I bought a Black 5GB Micro and after about 3 Weeks it froze. After I rebooted it (removing and reinserting teh battery) it stayed stuck on the Creative logo. Going into rescue mode (holding the power button to the left, taking out the battery, reinserting it and then letting go of the power switch) was useless because it would just freeze when i tried n e of the options. I took it back to the store and they gave me a new one, it's been working great ever since.
So, Short Answer: If rescue mode doesn't work just take it in, it's pooched.

Similar Messages

  • Zen Micro wont connect to my computor HELP

    This is the second Zen Micro that wont connect to my computer i've tried everything but nothing is working i've tried it on other computers and it still wont work. I just got this replacement today and I don't really want to go back and get another one tomorrow....Please help me..

    Do you have the latest software installed ?
    Also first install the software and then the micro, just to be sure.

  • Zen Micro Not Working-If you can help-Please

    I just got this zen today. I signed up with Napster to go. Downloaded the new firmware driver updates. Made sure my zen was fully charged before using. Plugged my zen into my computer. Transferred songs from Napster to MP3. Napster said the transfer was complete. Unplugged my zen and the screen says "Now playing Select Music to PLAY from Music Library" It won't play any songs, and no songs show up which leaves me to believe that no songs actually transferred like it said they did. I am so upset! I have been at this thing for three hours already! I just want my music to play! GRR!

    krystennicole, the thing with the Zen Micro (and other players, too) is that they use playlists. This means that it doesn't matter if you got 000 songs in it, it won't play anything that's not in the playlist.
    Now, you JUST loaded up your songs, and you have an empty playlist. What you need to do is add all your songs to the playlist to be able to listen to them. Later you can make playlists for separate genres if you like, but let's concentrate on what you want to do now: Listen to your music.
    Not sure if this is stated in the manual of the ZM, but here's a quickstart.
    Go to Music Library, and select All Tracks. Scroll to the one you'd like to begin with, and click Play. Now, all your songs will be loaded into the "Now Playing" list, and you'll be able to listen to all of them!

  • Zen touch isnt working at all *NEED HELP

    Today, i went to unplug my zen touch from charging to download some songs to it. Once i got it to my computer i noticed the power light was on, but the screen was blank, no picture, light, no anything. This player is only about a month old(i got it for christmas). I haven't dropped any water on it(had a bad experience with my zen xtra to do it again). The only thing i see that could have done this was over charging. I have it cahrge when i dont use it, which lately has been 2-3 days at a time, but can the battery over charge? And if thats not the problem, what could it be?

    ok, i tried doing what the poster above said, but nothing. i got the player from amazon.com so i dont really want to have to ship it back to them or ship it to creative. has anyone else had this problem or know of a way i can get the battery replaced?

  • Help needed getting Zen Micro to work on new

    Hi there, I am having a tough time getting my new PC to interact with my Zen Micro
    I have installed all the required software, I have done all the updates (or at least I think I have)
    I have upgraded my firmware to ver. ..0 and yet i still have the problem.
    The organiser seems to see the files in the player, but it cannot transfer them to the PC (or the PC to the Player). I cannot seem to access the player while it is connected either.
    So in short, I cannot transfer any of my music to my PC (4Gb worth).
    I have sent support requests, and I got an auto response to upgrade all the software versions, and the firmware, which I did. I have gone through the auto-detection process on the Creative site, and it recognises my player, and its newly updated firmware version, and only gives me recommended update options, nothing essential, or critical.
    So I'm pretty much stuck. also, how do i know that firmware ver. ..0 is the most updated for my product, as the support mail seems to talk about ver. 2.xx.xx which I'm nervous to start downloading as my player is now over a year old, and i fear that it may not support the newest technologies.
    Any help would be greatyl appreciated
    Thanks in advance
    Sparky
    P.S. I am still running my old family PC (Windows 98, with all the creative software original purchase versions running), and when I connect my Zen to this machine it works fine, so I guess that means that the files are not corrupted thankfully

    For the Zen Xtra right?
    I went to and chose MP3 Players > Zen (Hard Disk Dri've/MicroDri've) > Zen Xtra, then <EM>Get Files</EM>.
    The driver was listed there, but you want to download:
    Jukebox Driver version .26.02</LI>
    Creative MediaSource Software Update version 2.03.29</LI>
    NOMAD JukeBox Type 2 Version .0.03 (English) Web Release</LI>
    Creative NOMAD Explorer (Version 3.0.0) (if you want to use Nomad Explorer)</LI>
    You then want to:
    install the driver</LI>
    turn the Xtra on and connect to the PC and let the driver install (should be automatic)</LI>
    with the Zen still connected to the PC install MediaSource (it needs a Creative product present to validate the install)</LI>
    install the Nomad Jukebox Type 2 version (this is required to get MediaSoruce to work with the player)</LI>
    If you want, install Nomad Explorer</LI>
    That's all you should need to do.

  • Hi i recieved an ipod touch gen 5 for christmas and it worked perfectly on the 30th it decided to instantly shut down on me and over heat iv tried all of apples recommeded techniques but it wont work at all even when charging someone please help me!

    Hi i recieved an ipod touch gen 5 for christmas and it worked perfectly on the 30th it decided to instantly shut down on me and over heat iv tried all of apples recommeded techniques but it wont work at all even when charging someone please help me!

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • My new lightning iphone 5 charger wont work at all. help??

    my first charger that came with my iphone stopped working a few months ago. i bought the lightning charger from walmart and it worked for a while but now it wont work at all. i went and bought another and all they had were the lightning ones so i bought it and it doesnt work in the wall or car or laptop. i am not sure if something is wrong with my phone or these chargers? my friends that came with her iphone worked for mine this morning, but i cant find one of those and i am a little desperate to get it asap. if i go to my at&t store can they sell me one of the original chargers or help me figure out whats wrong? and i havent had my phone for a year yet, but i dont have insurance. what are my options?

    Make sure you use an authentic Apple charger and cable.  It doesn't matter where you buy them - a store or online.

  • Zen micros wont turn

    can anyone help ? i have 2 new zen micros , charged both , one turned on is working fine. the other displayed creative zen micros corparation, and thats all it will do . wont turn off .i have to take the battery out. put it does the same thing . now the screen is just blank

    Go into rescue mode and run a disk cleanup.
    If this won't work the player is faulty and you need to get it replaced.

  • The new itunes update will not install properly and now itunes wont work at all

    k, so I tried installing the new update for itunes and now it wont work at all. it says that the mobile device isnt installed. i have uninstalled and reinstalled itunes 4 times now.

    My issue is it wont even reinstall onto my computer
    Yes I'm aware of that. The procedures are also for trying in cases where iTunes can't be reinstalled due to a "Could not start Apple Mobile Device service" message.
    If you're getting a different error message relating to the Apple Mobile Device Service (or Apple Mobile Device Support) when you try to reinstall iTunes, post back to let us know what that error message says. (Precise text, please.)

  • Everytime i go on Itunes it tells me i have to restore my ipod but everytime i do, it just tells me to do it again? When i try and use my ipod it just has a connect to itunes sign and nothing else, it wont work at all?

    Everytime i go on Itunes it tells me i have to restore my ipod but everytime i do, it just tells me to do it again? When i try and use my ipod it just has a connect to itunes sign and nothing else, it wont work at all?
    I updated itunes and everything but nothings working and i just can't figure it out?
    Everytime i restore the stupid thing, it never pops up in my itunes again like its supposed to!

    Loop
    Maybe:
    Restore loop (being prompted to restore again after a restore successfully completes)
    Troubleshoot your USB connection. If the issue persists, out-of-date or incorrectly configured third-party security software may be causing this issue. Please follow Troubleshooting security software issues. .
    Next try placing in DFU mode and then restoring.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    Then try restoring on another computer.
    Last, make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar

  • Adobe Flash Player wont work after all steps taken, what haven't I done to make it work?

    I tried to play a game I love & I got this message: "To view this page ensure that Adobe Flash Player version 10.0.0 or greater is installed" So I went to your site to update my flash player & hit the "Test Flash Player" button & it came up
    like this^^. I went to the suggestions your site provided & went to Manage add-ons to look for Shockwave Flash Object to enable it:
    You can see that it is enabled by this picture I have provided. So it also asks me to make sure that ActiveX isn't clicked on & so I did:
    As you can see it's turned off & I even tried it the other way where it has the spot checked & it still wont play. So I decided to see if I could reinstall it onto my computer & so in turn I got this message:
    That is the message I got even after trying to delete Flash Player & reinstalling it. Now you can see my frustration with all this. Adobe Flash Player wont work after all steps taken, what haven't I done to make it work? I have a Windows 8.1 Pro, I use Internet Explorer which has the latest version on it, which is Windows Explorer 11 Version: 11.0.9600.17498 & I was also under the understanding that I also had the latest version of Adobe Flash Player on this computer as well. Can someone tell me what to do??

    First, confirm that ActiveX Filtering is configured to allow Flash content:
    https://forums.adobe.com/thread/867968
    Internet Explorer 11 introduces a number of changes both to how the browser identifies itself to remote web servers, and to how it processes JavaScript intended to target behaviors specific to Internet Explorer. Unfortunately, this means that content on some sites will be broken until the content provider changes their site to conform to the new development approach required by modern versions of IE.
    You can try to work around these issues by using Compatibility View:
    http://windows.microsoft.com/en-us/internet-explorer/use-compatibility-view#ie=ie-11
    If that is too inconvenient, using Google Chrome may be a preferable alternative.

  • HELP ME!!! Everytime i try to go to facebook. it redirects me and wont let me pull it up. I tried getting on it thru google and i even tried to download firefox, and it still wont work!!! help please

    HELP ME!!! Everytime i try to go to facebook. it redirects me and wont let me pull it up. I tried getting on it thru google and i even tried to download firefox, and it still wont work!!! help please

    To where are you redirected? Could this be something your network administrator has done on purpose?

  • HT3180 I just updated my Apple TV 2 and now it is flashing and not working at all.  Help

    I just updated my Apple TV 2 and now it is flashing and not working at all.  Help

    I just did the update to version 5.2 on our ATV2 and now I'm having the exact same problem as the OP- all attempts to access any iTunes services i.e. Movies or TV result in dropping back to the ATV Main menu.   Per Winston's suggestion, I logged out of iTunes and then tried to log back in.  I am getting a message "the server is not responding- please try again later".
    FWIW- all my non-iTunes services on the ATV are working fine- i.e. Netflix and YouTube.
    Sounds like the update has overwhelmed the Apple servers.
    Dave

  • Mac Mail Issue: I was having trouble sending to hotmail accounts from my Earthlink account, they had me go into Mac Mail preferences and make changes, now Mac Mail doesn't work AT ALL - any help changing the settings back to correct Mac Mail settings? I c

    I was having trouble sending to hotmail accounts from my Earthlink account, they had me go into Mac Mail preferences and make changes (because they claimed it was Mac Mail's fault, even though the hotmail error code said it's because Earthlink is blocked by hotmail), now Mac Mail doesn't work AT ALL - any help changing the settings back to correct Mac Mail settings? I can provide a transcript of the entire tech chat session, if that will help...

    both apostrophes are used correctly, thanks
    doesn't = does not (this is called a contraction)
    it's = it is
    Mac Mail's fault = possessive
    any help with the actual issue? thanks!

  • My iphone fall in the sea and now it's not working how i can take off my photo and numbers ? and do u thing it will be work or what plz help me !!!!!!!!!!!!!!!

    my iphone fall in the sea and now it's not working how i can take off my photo and numbers ? and do u thing it will be work or what plz help me !!!!!!!!!!!!!!!

    Sea water and electronics don't mix.  The salinity fries the internal circuitry of the phone. Your phone is toast.
    Certainly the user of any device which can be lost, stolen, or dropped in the sea would be smart enough to have had the data backed up, rght?  Your photos and numbers should be safely backed up on your computer or in the cloud.
    If you didn't do this, there's no way to recover those data now.  Backups are meant to be done BEFORE disaster strikes, not after.

Maybe you are looking for

  • User exit for sale order material serial number change

    I am looking for User exit for changing the serial number for the saleorder material va01.

  • Messages and iChat

    I upgraded to mountain lion but all my friends still have snow leopard or lion, so they use ichat. Is there a way to send messages and video chat with people who have AIM or mac ichat accounts using messages?

  • Neo4 Ultra Plat. / Opty 175 / Corecenter 2.0.2.1 errors on boot :(

     Heya., Been running my Neo4 Ultra Plat. since they first came out. This is a PCB v1.0. Thought i'd pop a Opty 175 in it and test drive it. It's running the latest 1D bios and all the most recent drivers. It's really odd Corecenter installs fine and

  • Distorted Camera Output

    Hello there. I will work on a project  about Real-Time Vision via Labview. When I've tried to test my cam at NI MAX(nimaxscreenshot.jpg) everything is okay. But when I try to test my cam via simple test vi(blockdiagram.jpg) my cam output(frontpanel.j

  • Pause and remember Arch is AWESOME!

    === Preamble === Sorry for a weird post, but I just had to do it. I've distro-bounced for the last probably 4 years now and finally settled on Arch by accident. I stated with [of course] Ubuntu just to try things out and then researched and researche