Zen microphoto help!! please i really need your h
hello everybody, i bought a zen microphoto 4GB in June and it worked perfectly until two days ago. I turned it on like i do everyday to listen to music on my way to school. i downloaded the newest version of firmware onto it'sthree days before. when i turned it on, it went into recovery mode. so i went to reboot, and it goes back into recovery mode. i tried about 3 times, then it disabled all the functions. i couldn't control anything. so i took out the battery, and left it until i came home. i come home, put in the battery, turn it on. i plug it in the computer, and the computer does not reconize that its docked and the screen goes white and then it shuts off by itself. then it just freezes, it refuses to turn on. i tell my friend today at school and he said the hard dri've crashed and now i have a brick the size of a zen microphoto. is this true, or?is something else wrong with it. please someone help if you can. Creative Zen MicroPhoto 4GBfirmware dowloaded 3 days before--ZENMicroPhoto_PCFW_6__30_04.exepurchased- June 0, 2006 with product replacement plan from best buyproblems started occuring November 7, 2006Message Edited by barylakamil on -09-200603:22 PM
one method i saw and tried worked well but you need to try it at your own risk!!! turn off your microphoto, grab your microphoto with the screen facing you, and either slap your hand against the SIDE of your microphoto, or slap the SIDE of your microphoto against your hand. This method works for me but try it at your own risk. it could damage your hard disk. (its probably already damaged anyways.)and if you really need to turn off your Zen but it wont turn off, i suggest removing the battery.
Message Edited by gmail on -09-200605:34 PM
Similar Messages
-
I created a photo album on my iPhone 4s - edited photos etc. but I cannot figure out how to transfer it to my pc (using Windows 8). The only folder in the iphone drive is the one which has the Camera roll photos Help please - I really need the photos!
The camera roll is not part of the sync process at all.
You should be importing these photos to your computer regularly as you would with any digital camera. Youc an organize them on your computer and sync the to the iphone if you wish.
The photos sync from the computer to the iphone is one way.
The iphone mirrors the selected content of the computer to which it is synced. -
Please i really need your help...
where can i buy an hp 110 tri color cartridge? here in the philippines since i bought my printer in singapore, can i buy a cartridge here?
What printer model?
You will need to Contact HP to request a "Regionalization Reset". There should not be any charge for this, it is covered as part of the cartridge warranty. You will need to have access to your computer and printer while on the line with HP. You will also need to have a set of cartridges for the new region, once the reset is complete cartridges from the original region will no longer work. HP's web page on the subject is here.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V -
please someone help me regarding my ipad, i updated it to io6 but suddenly it shut down and till today i cannot use it nor turn it on, everytime i turn it on an apple logo only appears on the screen and nothing happens, please i really need a help here thanks
Have you the iPad User Guide? If not, download it from the link under manuals at the start of this forum an tke time to give it a cursory read at the very least.
Also, there is no point in awarding yourself the 'This solved my question' (or indeed 'This helped me') tags since, as you can see, the questioner cannot get any points. (Pardon the pun.) You can learn more about this at
https://discussions.apple.com/static/apple/tutorial/mark.html -
HT4993 A CHINESE STUDENT REALLY NEED YOUR HELP!!
A CHINESE STUDENT REALLY NEED YOUR HELP!!
Dear Sir or Madam，
As I bought my iPhone 5 (16GB,White) in the USA from Sprint, full price with tax, unlocked ,it was excepted to be a global phone. But now I come across with some problems in China using local carrier, everything is working properly except sending text message, and iMessage and Facetime also seem not to work.This is very serious for Apple and me! Will I have the chance to fix this?
I tried all the possible solutions from the Internet, and the Official solution offered by Apple (http://support.apple.com/kb/TS4459), but it doesn't seem to work.
Will Apple help me with this issue? Please do.
Information of my iPhone:
SN: :F1*******8GJ
<Personal Information Edited by Host>luyao49 wrote:
A CHINESE STUDENT REALLY NEED YOUR HELP!!
Dear Sir or Madam，
As I bought my iPhone 5 (16GB,White) in the USA from Sprint, full price with tax, unlocked
No such thing is sold from any authorized source in the US. The Sprint phone is not unlocked. It can be unlocked by Sprint for use on international (non US) carriers for current Sprint customers in good standing after completing (I believe) 60 days of service.
If you are having problems using certain features on an unsupported carrier, you'll have to work it out with your carrier. -
i just brought an iphone 4 16gb off Ebay and everytime i insert my sim it doesnt allow me to activate any further i really need your help?
applelogo wrote:
...Please insert another SIM card from a supported carrier or request that this iPhone be unlocked by your carrier. ...
You need to Contact the Carrier that it is locked to...
Also see this discussion.
https://discussions.apple.com/message/21189708 -
Anybody who can help me? I really need your help
I've tried to execute J2ee tutorial examples.
I don't know why this sample didn't execute...I've already finished to set up J2EE and enviornment variables.
I was trying this part from j2ee tutorial titled as "Packing Web modules".
Whenever I type "asant create-war" to make web modules in command window. I always got error.
Packaging Web Modules(From J2ee tutorial for your information)
A web module must be packaged into a WAR in certain deployment scenarios and whenever you want to distribute the web module. You package a web module into a WAR using the Application Server deploytool utility, by executing the jar command in a directory laid out in the format of a web module, or by using the asant utility. This tutorial allows you to use use either the first or the third approach. To build the hello1 application, follow these steps:
In a terminal window, go to <INSTALL>/j2eetutorial14/examples/web/hello1/.
Run asant build. This target will spawn any necessary compilations and will copy files to the <INSTALL>/j2eetutorial14/examples/web/hello1/build/ directory.
To package the application into a WAR named hello1.war using asant, use the following command:
asant create-war
This command uses web.xml and sun-web.xml files in the <INSTALL>/j2eetutorial14/examples/web/hello1 directory.
To learn how to configure this web application, package the application using deploytool by following these steps:
Start deploytool.
Create a web application called hello1 by running the New Web Component wizard. Select FileNewWeb Component.
In the New Web Component wizard:
Select the Create New Stand-Alone WAR Module radio button.
In the WAR File field, enter <INSTALL>/j2eetutorial14/examples/web/hello1/hello1.war. The WAR Display Name field will show hello1.
In the Context Root field, enter /hello1.
Click Edit Contents to add the content files.
In the Edit Contents dialog box, navigate to <INSTALL>/j2eetutorial14/examples/web/hello1/build/. Select duke.waving.gif, index.jsp, and response.jsp and click Add. Click OK.
Click Next.
Select the No Component radio button and click Next.
Click Finish.
Select FileSave.
A sample hello1.war is provided in <INSTALL>/j2eetutorial14/examples/web/provided-wars/. To open this WAR with deploytool, follow these steps:
Select FileOpen.
Navigate to the provided-wars directory.
Select the WAR.
Click Open Module.
I guess this step is for checking my system about setup information. I not sure how to change it.
the result from execution of ansnt command in dos
D:\J2ee\j2ee-1_4-doc-tutorial_7\j2eetutorial14\examples\web\hello1>asant create- war Buildfile: build.xml
j2ee-home-test:
BUILD FAILED D:\J2ee\j2ee-1_4-doc-tutorial_7\j2eetutorial14\examples\common\targets.xml:10: T he j2ee.home property is not properly set in <INSTALL>/j2eetutorial14/examples/c ommon/build.properties.
Set the j2ee.home property to the location of your Application Server installati on.
On Windows, you must escape any backslashes in the j2ee.home property with anoth er backslash or use forward slashes as a path separator. So, if your Application Server installation is C:\Sun\AppServer, you must set j2ee.home as follows:
j2ee.home = C:\\Sun\\AppServer
or
j2ee.home=C:/Sun/AppServer
j2ee.home is currently set to:
Total time: 0 seconds
D:\J2ee\j2ee-1_4-doc-tutorial_7\j2eetutorial14\examples\web\hello1>
I've installed J2ee sdk in C:\Sun\AppServer
PATH: %J2EE_HOME%\bin;%JAVA_HOME%\bin;
CLASSPATH: %J2EE_HOME%\lib\j2ee.jar;C:\Java\jre1.6.0_05\lib\ext\QTJava.zip;C:\oraclexe\app\oracle\product\10.2.0\server\jdbc\lib\ojdbc14.jar
J2EE_HOME: C:\Sun\AppServer
JAVA_HOME: C:\Sun\AppServer\jdk
I've installed J2ee with administration 4848, HTTP: 8089 HTTP: 8090
I guess this could refer the target.xml and build.properties. So, I've tried after changing some value, which is fit for my setup.
but, still doesn't work.
targets.xml
<path id="classpath">
<fileset dir="${j2ee.home}/lib">
<include name="j2ee.jar"/>
</fileset>
</path>
<target name="j2ee-home-test" >
<!-- Test if j2ee.home is set properly by looking for j2ee.jar -->
<available file="${j2ee.home}/lib/j2ee.jar" type="file" property="j2ee.jar.present" />
<fail unless="j2ee.jar.present">
The j2ee.home property is not properly set in <INSTALL>/j2eetutorial14/examples/common/build.properties.
Set the j2ee.home property to the location of your Application Server installation.
On Windows, you must escape any backslashes in the j2ee.home property with another backslash or use forward slashes as a path separator. So, if your Application Server installation is C:\Sun\AppServer, you must set j2ee.home as follows:
j2ee.home = C:\\Sun\\AppServer
or
j2ee.home=C:/Sun/AppServer
j2ee.home is currently set to: ${j2ee.home}
</fail>
</target>
<target name="clean" >
<delete dir="${build}" />
<delete dir="${dist}" />
<delete dir="${assemble}" />
<delete file="${ear.name}" />
<delete file="${war.name}" />
<delete file="${war.file}" />
<delete file="${client.jar.name}" />
</target>
<path id="db.classpath">
<fileset dir="${db.root}/lib">
<include name="*.jar"/>
</fileset>
</path>
<target name="create-db_common"
depends="init,start-db,delete-db"
description="Create database tables and populate database." >
<sql driver="${db.driver}"
url="${db.url}"
userid="${db.user}"
password="${db.password}"
classpathref="db.classpath"
delimiter="${db.delimiter}"
autocommit="false"
onerror="abort" >
<transaction src="${sql.script}"/>
</sql>
</target>
<target name="delete-db"
description="Deletes the database tables." >
<sql driver="${db.driver}"
url="${db.url}"
userid="${db.user}"
password="${db.password}"
classpathref="db.classpath"
delimiter="${db.delimiter}"
autocommit="false"
onerror="continue" >
<transaction src="${delete.sql.script}"/>
</sql>
</target>
<target name="ping-db"
description="Checks to see if Derby is running." >
<java classname="org.apache.derby.drda.NetworkServerControl"
fork="yes"
resultproperty="db.ping.result">
<jvmarg line="${db.jvmargs}" />
<arg line="ping" />
<classpath refid="db.classpath" />
</java>
<condition property="db.running">
<equals arg1="${db.ping.result}" arg2="0" />
</condition>
</target>
<target name="start-db"
unless="db.running"
description="Starts the Derby databse server."
depends="ping-db">
<sun-appserv-admin
explicitcommand="start-database" />
</target>
<target name="stop-db"
description="Stops the Derby database server."
depends="ping-db"
if="db.running">
<sun-appserv-admin
explicitcommand="stop-database" />
</target>
<target name="admin_command_common">
<echo message="Doing admin task ${admin.command}"/>
<sun-appserv-admin
command="${admin.command}"
user="${admin.user}"
passwordfile="${admin.password.file}"
host="${admin.host}"
port="${admin.port}"
asinstalldir="${j2ee.home}" />
</target>
<target name="create-jdbc-resource_common">
<antcall target="admin_command_common">
<param name="admin.command"
value="create-jdbc-resource
--connectionpoolid ${conpool.name} ${jdbc.resource.name}" />
</antcall>
</target>
<target name="delete-jdbc-resource_common">
<antcall target="admin_command_common">
<param name="admin.command"
value="delete-jdbc-resource ${jdbc.resource.name}" />
</antcall>
</target>
<target name="deploy-war">
<antcall target="admin_command_common">
<param name="admin.command"
value="deploy ${war.file}" />
</antcall>
</target>
<target name="undeploy-war">
<antcall target="admin_command_common">
<param name="admin.command"
value="undeploy ${example}" />
</antcall>
</target>
<property environment="env" />
<target name="listprops"
description="Displays values of some of the properties of this build file">
<property file="../../common/admin-password.txt" />
<echo message="Path information" />
<echo message="j2ee.home = ${j2ee.home}" />
<echo message="j2ee.tutorial.home = ${j2ee.tutorial.home}" />
<echo message="env.Path = ${env.Path}" />
<echo message="env.PATH = ${env.PATH}" />
<echo message="" />
<echo message="Classpath information" />
<echo message="classpath = ${env.CLASSPATH}" />
<echo message="" />
<echo message="Admin information" />
<echo message="admin.password = ${AS_ADMIN_PASSWORD}" />
<echo message="admin.password.file = ${admin.password.file}" />
<echo message="admin.host = ${admin.host}" />
<echo message="admin.user = ${admin.user}" />
<echo message="admin.port = ${admin.port}" />
<echo message="https.port = ${https.port}" />
<echo message="" />
<echo message="Domain information" />
<echo message="domain.resources = ${domain.resources}" />
<echo message="domain.resources.port = ${domain.resources.port}" />
<echo message="" />
<echo message="Database information" />
<echo message="db.root = ${db.root}" />
<echo message="db.driver = ${db.driver}" />
<echo message="db.host = ${db.host}" />
<echo message="db.port = ${db.port}" />
<echo message="db.sid = ${db.sid}" />
<echo message="db.url = ${db.url}" />
<echo message="db.user = ${db.user}" />
<echo message="db.pwd = ${db.pwd}" />
<echo message="url.prop = ${url.prop}" />
<echo message="ds.class = ${ds.class}" />
<echo message="db.jvmargs = ${db.jvmargs}" />
</target>
build.properties ����
j2ee.home=
j2ee.tutorial.home=
asinstall.dir=${j2ee.home}
admin.password.file=${j2ee.tutorial.home}/examples/common/admin-password.txt
admin.host=localhost
admin.user=admin
admin.port=4848
https.port=8181
domain.resources="domain.resources"
domain.resources.port=8080
# Derby configuration settings
db.delimiter=;
db.root=${j2ee.home}/derby
db.driver=org.apache.derby.jdbc.ClientDriver
db.datasource=org.apache.derby.jdbc.ClientDataSource
db.host=localhost
db.port=1527
db.sid=sun-appserv-samples
db.url=jdbc:derby://${db.host}:${db.port}/${db.sid};create=true;
db.user=APP
db.pwd=APP
db.jvmargs=-ms16m -mx32m
Is there anyone who can tell me how to change it? I really need your help....
Thank you in advance.ok,
First of all make sure your tutorial folder is installed from the root:
C:\javaeetutorial5
or
D:\javaeetutorial5
it makes things so simple.
Secondly:
set your jee tutorial home
JAVAEE.TUTORIAL.HOME =
C:/javaeetutorial5
Thirdly: check in:
C:\javaeetutorial5\examples\bp-project
make a copy of the build.properties.sample save it as build.propropties, as a property file,
edit the properties file as in:
build.properties
As follows:
# uncomment the property javaee.home, and add the path
# to your GlassFish Java EE 5 SDK installation
javaee.home=c:/Sun/SDK
javaee.tutorial.home=c:/javaeetutorial5
# Uncomment the property j2ee.server.username,
# and replace the administrator username of the app-server
javaee.server.username=admin
# Uncomment the property j2ee.server.passwordfile,
# and replace the following line to point to a file that
# contains the admin password for your app-server.
# The file should contain the password in the following line:
AS_ADMIN_PASSWORD=admin1234and so fourth. Some of the settings as the application server name is all done for you
and then test it again.
Take care of editing the property file. It can give you headache.
Note also that this is for application server 9.1 - JEE5.
eve -
I erase my mac book pro to factory setting and cannot re-install the software. I received a message saying my Apple ID has not yet used with the App store. Please review your account information. Could anyone help please. I need to re-install my os.
Use Internet Recovery. You shouldn't need an AppleID. http://support.apple.com/kb/ht4718
Internet Recovery will install the OS that shipped with the Mac. You can then upgrade to Mavericks if that was not it.
Do you have an App Store account? Did you ever use it to install the OS? -
Please i really need a big help hare. hp lj1300 driver for win 7 32 bit and 64 bit printer driver.
hi every one please i really need halp hare i have a hp LJ 1300 printer and i have been trying to install it on window 7 (32 bit and 64 bit). i have been looking for the LasarJet 1300 printer driver but i have not seen any. i even down loaded form hp web site. but it still did not work. after installing when u go to the divice mannger its showing the printer driver not found and then its not even printing. am using a usb and a laptop. i really need this driver for window 7. so i could get my work done. please some one help me hare.
Hi:
This 32 bit Intel graphics driver should work...
https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=23884&lang=eng&ProdId=3719 -
Hi. I am reinstalling Macbook Pro OS X from the "question mark icon". During process, there is a question "select the disk where to install Mac OS X" but there is no option/selection in the box. I really need your help guys. I need it badly. :'(
If you got the question mark and you do not see any partition to install OS X to, it is not good.
Close the OS X installer by pressing the red button at the top left corner of the Install OS X window, and open Disk Utility. Then, look at the left sidebar and tell me if you see your hard drive. You should see something like this:
Do not worry if you do not see Macintosh HD or if the option with an arrow shows a different name. This is normal.
If you see it, choose it, go to the Erase tab and erase the drive. Finally, close Disk Utility and reinstall OS X. You will lose everything if you do not have a backup.
If you do not see the drive, it is damaged and it has to be replaced. You can replace the hard drive of a MacBook Pro without voiding the warranty, and any 2'5" SATA hard drive is valid. If you are not an experienced user or you do not want to go inside the MacBook, take it to an Apple Store or reseller. -
Hi. i downloaded the last version osf ios7, but i skipped the part where i was supposed to sing in to iCloud, now i'm trying to restart my iphone and i can't,,, i don't know what to do i really need your help!!!
Just go into settings>Icloud> then sign in there.
-
SOS... PLEASE, I REALLY NEED HELP... MAC IS HAVING TROUBLE BURNING...
Hey guys,
I am burning from IDVD, but after burning 2-3 DVDs on Dual Layer DVD's, it KICKS me out of the program. When this happens, I have to go BACK again and start the long burning process of rendering the menus, etc, etc... I don't know what's happening. Is it that the Mac has a problem? Or is this normal to render and burn an hour long DVD? So far, it has taken me the whole afternoon to burn JUST 2 DVD's. Is that normal? Also, is there a way to tell the MAC to burn a certain amount of copies, just like the Adobe Premier gives us that option? I can't seem to find that option anywhere. I have to burn 100 DVD's for Monday... I REALLY need your help.
Thanks,
Claudia.If you've already created the disk image file (projectx.img), open disk utility (go 'utilities'>'disk utility').
If the disk image file doesn't show on the left hand side, drag the .img file there then select it. Hit the burn icon on the top left hand side of the disk utility window, then put in the dvd and choose the burn speed - you get better player compatibility and burn reliability if you burn at a slower speed - e.g 4x.
I've got 50 to do for Monday and so I feel your pain. The projects I'm burning are about 75 mins long and doing it this way, to burn at 1X takes about 1 hour, 4X takes about 20 mins.
Like Zak, I've no experience of DL discs so you may want to post and/or search the iDVD forum. -
SOS... PLEASE, I REALLY NEED HELP... IDVD IS HAVING TROUBLE BURNING...
Hey guys,
I am burning from IDVD, but after burning 2-3 DVDs on Dual Layer DVD's, it KICKS me out of the program. When this happens, I have to go BACK again and start the long burning process of rendering the menus, etc, etc... I don't know what's happening. Is it that the Mac has a problem? Or is this normal to render and burn an hour long DVD? So far, it has taken me the whole afternoon to burn JUST 2 DVD's. Is that normal? Also, is there a way to tell the MAC to burn a certain amount of copies, just like the Adobe Premier gives us that option? I can't seem to find that option anywhere.
I've converted the project into disk image on the desktop but once it's as disk image and I try to open it, it displays a window which has several files but when I click on them nothing happens, they don't open. I don't know what why.
I have to burn 100 DVD's for Monday... I REALLY need your help.
Thanks,
Claudia.Claudia
You need to a make disc image from the file menu within iDVD6 ....can you do that?
Click Here
From the disc image you can make as many copies as you wish and you won't have to wait long hours for encoding the entire project all over again.
Also I need you to tell us how much available hard drive space you currently have on the main HD / startup volume. You need at least 20GB's Do you have this kind of HD space or not?
iDVD6 will start the whole process all over again each time you quit from the app itself....but it normally offers up the option to keep making additional copies without quitting. Apparently this feature either isn't working properly for you or perhaps you missed this particular dialog box.... I don't know.
Nevertheless, keep in mind that iDVD6 is an authoring program and wasn't really written as a burn tool. That's not one of it's stronger points. Leave the burning to DVD-R media to either apple's disc utilities or roxio toast where you can also lower the burn speed to 4x or lower.
Hope this Helps but if not just come on back. -
I do not know how to get the music that I buy on itunes, on my mac, onto an ipod. I have already authorized my computer and "downloaded" my music, but that did not do anything, or provid the results that I was expecting, at least. Please, I really need to know how to do this on my own but I do not know what to do.Thank you in advance to anyone that is answering this question that I know most everyone but me knows how to accomplish. thanks!!!
In iTunes go to the Help menu in the upper menu bar. Then click on iTunes Help. Then on Sync your iPod, iPhone or iPad and follow the instructions.
-
Zen MicroPhoto Problems! PLease,I Really Need Help!!
hello everybody, i bought a zen microphoto 4GB in June and it worked perfectly until two days ago. I turned it on like i do everyday to listen to music on my way to school. i downloaded the newest version of firmware onto it'sthree days before. when i turned it on, it went into recovery mode. so i went to reboot, and it goes back into recovery mode. i tried about 3 times, then it disabled all the functions. i couldn't control anything. so i took out the battery, and left it until i came home. i come home, put in the battery, turn it on. i plug it in the computer, and the computer does not reconize that its docked and the screen goes white and then it shuts off by itself. then it just freezes, it refuses to turn on. i tell my friend?yesterday at school and he said the hard dri've crashed and now i have a brick the size of a zen microphoto. is this true, or?is something else wrong with it. please someone help if you can. Creative Zen MicroPhoto 4GBfirmware dowloaded 3 days before--ZENMicroPhoto_PCFW_6__30_04.exepurchased- June 0, 2006 with product replacement plan from best buy?Message Edited by barylakamil on -0-20062:23 PM
If you cannot even reach recovery mode any more you will need to contact customer support. If you are in the USA you get a 3month parts and labour warranty and a year parts warrantyMessage Edited by ts on -0-20060:36 PM
Maybe you are looking for
-
i tried to install an update of my ios via itunes and my phone was totally cleared. right now im trying to activate it again, its not working. what can i do?
-
Can't see dual monitor via HDMI on Lenovo U310
Hi All. I try to connect second monitor (NEC MultiSync EA232WMi) via DisplayPort to my Lenovo U310 HDMI port and it didn't work. The only I can see is a black screen on NEC and nothing more. I tried Fn+F10 to select output mode and standard Windows 7
-
ALV change layout button in toolbar
Hi, I have an ALV,which has a change layout option in its toolbar.I want to save layouts which r user specific.Please help me with this isse. Thanks
-
Cannot download Maverick. Get message that production distribution file could not be verified. It may be damageed or was not signed. Can anyone help?
-
BitmapData masking: how to merge 2 alpha channels?
How can I apply an alpha mask from one bitmapdata to another? In other words, I want to merge the alphas, not simply copy one alpha channel to another bitmap. Here's an illustration: Notice that both the triangle and the ellipse have alpha channels,