Zen Microphoto Problem!! Help plea

Ok, so i've got blue microphoto. It has been working great during a year. But now theres a problem. When i connect it to my computer, and try to move music there with MicroPhoto Media Explorer, it says: "Your player is not connected. Please connect your Creative Zen Microphoto to the computer." But it is connected correctly. It has been working before. I have tried to install the cd few times, but it doesnt help. What shall i do?

Well. I did this: Start -> Run.. -> devmgmt.msc
Then look for microphoto from the list, then click that update thing up in buttons when u have selected that player. Then look for updates with internet. That program connects to the windows update thing, and finds an update. Its something like that has 3 letters in beginning and first is M.. i mean the updates name. Then it wokrked.

Similar Messages

Install for Zen microphoto? Help PLEAS

Hi, I have a zen microphoto, and had installed it on my laptop using the disk a couple of months ago. I lost my entire hard dri've, thus...the installation of my mp3 player, and, of course, I left the installation disk lying on the coffee table and my dog decided to make it a new chew toy and snapped it in half. I tried looking, but where can I find software to download to get my player working again? I already tried just plugging it in and seeing if it showed up in "My Computer" so I could just drop files into it, but it alas is not working. Any help would be greatly appreciated. Thanks.

http://us.creative.com/support/downl...ype=3&x=22&y=3?That should be the link you want.

Zen vision problem HELP PLE

I recently bought a zen vision 4gb
but i cannot get it to work, after i've charged it and turn it on it just says "Re-building Library" and stops about half way through
also it cannot pick up the device through USB so cannot transfer songs etc.
my brother has a zen micro 5gb which works fine , we also use the same computer
Thankyou for all the help . much appreciated!

also i forgot to add when it is on the "Re-building Library" Screen it will not turn off

Zen MicroPhoto Problems! PLease,I Really Need Help!!

hello everybody, i bought a zen microphoto 4GB in June and it worked perfectly until two days ago. I turned it on like i do everyday to listen to music on my way to school. i downloaded the newest version of firmware onto it'sthree days before. when i turned it on, it went into recovery mode. so i went to reboot, and it goes back into recovery mode. i tried about 3 times, then it disabled all the functions. i couldn't control anything. so i took out the battery, and left it until i came home. i come home, put in the battery, turn it on. i plug it in the computer, and the computer does not reconize that its docked and the screen goes white and then it shuts off by itself. then it just freezes, it refuses to turn on. i tell my friend?yesterday at school and he said the hard dri've crashed and now i have a brick the size of a zen microphoto. is this true, or?is something else wrong with it. please someone help if you can. Creative Zen MicroPhoto 4GBfirmware dowloaded 3 days before--ZENMicroPhoto_PCFW_6__30_04.exepurchased- June 0, 2006 with product replacement plan from best buy?Message Edited by barylakamil on -0-20062:23 PM

If you cannot even reach recovery mode any more you will need to contact customer support. If you are in the USA you get a 3month parts and labour warranty and a year parts warrantyMessage Edited by ts on -0-20060:36 PM

Creative Zen Microphoto Problem

Hello, i'm trying to use my microphoto on my car (BMW er series), using the original USB Interface, but it doesn't work, battery charge but im not able to sync with the car.
I've a zen stone plus 2gb and it works perfectly, when i connect, the player goes to storage mode and then i'm able to control with the navi.
Thanks.

fasterfox wrote:
When I include my ZEN Microphoto on the screen appears report "Hardware problem" . I install MP3 Player Recovery Tool, but he does not see - "No supported device connected". In what a problem can be, and how to correct it independently?
Software cannot fix a hardware problem. The hardri've or motherboard is bad in you player.

Zen Microphoto problems - Hiss/squeak at start of trac

Hi, i'm new to this forum, but i've joined up becasue i'm very frustrated with my Zen Microphoto.
I purchased a dark blue ZMP a few months ago, and was disappointed with its perfomance beacsue it had bad backgroud noise and a very annoying hiss/squeal which came on at the start of music playback, i.e. when u choose a track to play, or skip one.
I took the player in to my place of purchase, and got it sent off to be repaired. I've now got another dark blue replacement ZMP form Creative, but unfortunately it has the same problem. I am rightfully annoyed, and i might consider getting a refund, if this happens on all microphotos, cause i don't like it.
I've read some of the forums regarding the backgroud hiss that is present in some ZMPs, but none have my problem of the hiss/squeal overlaying approx 6 seconds of music playback. (this only happens when the screen is on, as u can't choose a track to play with it off). Also, when the harddri've is reading a track, simultaneously to this, if i put my ear the the actual player unit, i can hear a similar noise, that also comes on at start up. has anyone experience this?
Is this normal & has anyone ever experienced this before, or have i just ended up with two freaky players? If so, should i just get another replacement- maybe a different colour?

The sound you're talking about is just a sound of a hard dri've when the display is on. As the display fades out the sound dissapears. I think it's normal and it happens on my Microphoto too. And it doesn't happen only at start of tracks - try to rewind a track to the middle and you'll hear it as well - as long as the display will be on.

Zen MicroPhoto Problem! [ FIRMWAR

Hello-

My Zen Microphoto [ 8 gb ] has not been functioning properly. When I turn it on, it displays "Firmware Problem"
Now I have read some other users post about similar problems. However their solution was to ''clean-up & re-format'' the player. However, my Zen gives me no options to do so. I have tried plugging it into my notebook, however, the program doesn't recognize that it is there.

*I have dropped my player a few times, but not with hard force.

In addition, When the screen displays ''Firmware Problem'' it goes frozen-- and cannot shut off [ i remove the battery to shut it off ]

Anyway i can fix this? Thanks in advance~Message Edited by xChinaDollx on 05-28-2006 06:9 PM

xChinaDollx wrote:
Is there a specific option i should choose to solve this firmware problem?[[ and what exactly is firmware? Sorry i am not really familiar with this ]]
Firmware is like Windows in your computer- it basically 'runs' your .mp3 player.
First select Clean Up and let it complete. It should only take a few moments. Then select Reboot.
Does that fix the problem?
If not, select Format, allow it to complete. Select Reboot.
Does that fix the problem?
If neither of those work, select Reload Firmware and reboot.
Requirements:
? Microsoft? Windows? XP Professional x64 Edition, Windows XP (Service Pack or later) or Windows XP Media Center Edition 2004
? Windows Media? Player 0 or later
Notes:
? To install this firmware
. Download the ZENMicroPhoto_PCFW_L6__3_0.exe file into your local hard disk.
2. Connect your player to your computer.
3. Double-click the firmware file and follow the instructions on the screen.
If you still have troubles, try this:
Do a Clean Boot on your computer.
Once your computer has re-booted:
? Connect the MP3 player to a USB port on the back of the PC.
? Click Download Now next to the firmware upgrade-> Agree-> Save-> Save to Desktop
? When the file download shows Download Complete, click Run
? Click the Upgrade button to start the Firmware installation
? When the firmware upgrade shows Firmware upgrade completed, click Close
Note:
? If the firmware update could not detect the player being connected, unplug the player and plug it in again.
? Do not disconnect the player once the firmware update is in progress.
? When the firmware update is complete, the player will start charging automatically. It will display a charging icon, and the blue power LED will start blinking.
/reposted from another thread

Zen MicroPhoto display - help

I am very happy with my Zen MicroPhoto...apart from one thing. On a direct sunlight I can't read a thing on a display. I've got to look at it from all impossible angles in order to be able to change an album to play. Is it like this with all of them or is it only a fault of my one? Please help - as summer is here

Most color LCDs, even the transflecti've ones, have issues with viewing under direct sunlight. This is because the backlight in the display is overcome by the powerful sun light so it's very hard to see the image.
Mind you, these are OLED displays which are much better than the TFT displays in many other devices.

Zen Microphoto Problems

i have the zen microphoto and it was workin fine untill i went and baught a charger for it and it was the wrong voltage and now my mp3 player boots up in recovery mode. i've tryed the firmwear update and my comp cant find the device. why is that? i have winxp sp2. i've been reading and there is some talk about a microsoft MTP driver update, what is MTP?Message Edited by mrhahn405 on 2-28-200706:52 AM

does anyone know what im talkin about??

Zen Micro 5GB - Installation problems - HELP ple

Dear All
I am sure must have been asked before, so please bear with me.
Just bought a Zen Micro and cannot seem to install the supplied software from the CD. Keep getting a InstalWizard 6003 error message. Have tried restarting, deleting temporary files (even connevting to net) and still get same message.
Have tried to install then by copying files to harddri've and running from there but that fails.
What am I to do or have I a dud?
All suggestions greatefull recieved.
Andy

I was also thinking - how's your cd player on the pc - is it generally ok ?
try copying the files from the cd to your hard dri've and running from there.
Sometimes you can get -6003 errors if some of the source files are unreadable for any reason.
If that fails then i suggest downloading from creatives website and trying the install again incase you just have a dud cd.
Seeing as you've just got it i'll also tell you from my own experience......
I have a zen micro 5gb bought it about 3 months ago and had no problems with the installation but that was on a fully patched up to date winxp sp2 with 2Ghz memory.
I did have issues with the zen micro itself hanging but i upgraded to the 2..02 firmare beta and it has been happy ever since.

Can no longer access the files on my Zen Xtra. Help, plea

I've been using my 60gb zen xtra for over a year now without problems (except for having to replace it twice due to the faulty headphone jacks), but after recently losing one of my hard-dri'ves, I decided to install Creative Mediasource so that I could easily copy all the music on my player to a new hard-dri've. Up until now I'd never used Mediasource - just the regular nomad explorer browser. After I installed Mediasource and rebooted, I can no longer get to the files on the Zen. I know they're still there - I can still play them on the player itself, and I can even access the player - when I click on the Nomad Explorer icon in "my computer" I get into the explorer and the player reacts by going into transfer mode, only when I go into "music library" everything is blank, and when I go into the data library it says 'not connected', even though it's able to show me that I only have 45 gb free, which is accurate. I'm not saying that Mediasource caused this, because I don't know, but I'm desperate to get my music back - having both the hard-dri've fail me and then the player itself would be a catastrophe for me. Any general help, whether with mediasource problems or just general problems accessing the music library would be incredibly appreciated. Thanks!

Geez, what an embarassment. Found all my files right were they were supposed to be. Uh, all's well that ends well? Again, sorry for cluttering up the board.

Zen V Plus Help Ple

I've had a stone for a while and decided to upgrade to the Zen V plus after finding a good deal on amazon, Anyway for the first week or so it worked perfectley (although it wouldn't play via the USB on my car stereo like the stone did) the other day it decides to freeze up and now is displaying "Firmware problem" I tried downloading the restore programme off of the support section of the site but its now saying its not connecting to the pc (pc says its not connected and mp3 screen just shows the error message instead of saying docked) so the restore programme only displays "mp3 player not connected" Help please

First, charge your player overnight to make sure it has a full charge. Remove?ALL Creative software from your computer?and roll back the Windows Media Player to 0. Then re-add your software and plug in your player. That is the easy way to get your player to work. Hope this method hel
ps.
If it doesn't, then I suggest you do a search at the top of page and see all the different things people have done to get their players to work. If that doesn't help, contact support by e-mail.
Also try the forums at fixya.com and anythingbutipod.com.
luvmyrescuedogs

Zen mp3 player -- HELP ple

We just opened and began installation and activation this hour. The player is not turning on. My son worked hard to earn money for this player and is in meltdown that it may not be broken. Someone please help me. What do we do?

Once it's been plugged in for a while, if it still doesn't turn on, try pressing the reset button with a paperclip. If it still isn't working, hold down the play button and press reset again, then (still holding play) slide the on switch.
Don't panic though, as even if there is a problem with it, you should find it quite painless to get a replacement.

How to play music from ZEN?? HELP PLEAS

Ok, I brought my ZEN 8GB to work today, thinking of listening to some songs while working. Please note that I'm not allowed to install any software onto my workplace's PC. So, I plugged in my ZEN to the USB port. Driver installs. Then, I went to my ZEN's Music folder, selected all the mp3 and hit Enter. Instead of playing the music in WMP, it created a playlist for me. I can only play one song at a time by right-clicking the song and click Open/Play. I tried to load the playlist, which is .pla format, into WMP but WMP returned me an error message instead.
Please help me with this! I really wanna listen to music from my ZEN through the PC!

Quote:
But if I sync my device, assuming my office's WMP's version supports it, won't the songs in my device be gone Synnchronising means if I delete the song from the playlist, won't it also delete the song from my device
Are you deleting songs Playlist are lists tied to songs
If you sync with your player and have nothing on your PC then I believe your PC would be updated with the latest data.
In any case PLEASE backup your music before attemping anything on this company PC.
PLEASE Check under WMP Sync menue and find the help files.
Normally, under zen explorer there is a sync manager in task bar which you could set up the
direction for synchronization - I normally have mine ALWAYS FROM THE DEVICE TO THE COMPUTER AND IN THE MANUAL MODE.
What is so hard in your case is that you have no control over the computer you are using (Company PC) by being able to have
the proper drivers and latest WMP software installed.

Zen Microphoto Problems - Rebuilding Libr

I've so far had 3 ZMPs from Creative. My st one i dropped, my 2nd one froze up after the rebuilding library problem, and now my 3rd one is malfunctioning as well.
The 3rd ZMP has never been dropped, sccratched, or even touched because I have the Belkin case for it. When I put the music files into the player and select them to play, the music plays. But unfortunately, it dosent show the name of the song, album, or artist. Because I thought it was file corruption, I did a firmware erase and loaded the firmware. Then I couldnt get the computer to recognize it, so I used another computer to put the firmware in.
After that, my ZMP started the rebuilding library routine again. I redownloaded the firmware again, thinking that something else was wrong.
And alas, after that last firmware upgrade, my ZMP wont go past the creative logo.
Im sure that it isnt just a coincidence that I was given 2 bad players in a row.
Any help would be appreciated

Have you tried using recovery mode?
Slide the battery into the player while holding the power switch towards the 'ON' direction.
If that doesn't work, contact costumer support:
http://us.creative.com/support/

Zen Microphoto Problem!! Help plea

Similar Messages

Maybe you are looking for