Zen MuVo V200 problem

My sister has the GB Zen MuVo V200 and hasn't filled the capacity yet, but the player won't allow her to put any more songs onto it.
It pops up a message saying that: "Your Music Library is corrupted and cannot be recovered. MediaSource will now revert to your most recent back-up available. Would you like to continue? Yes/No."
Even if I click Yes or No, I need to download some Microsoft jet pack software, I haven't a clue what it is!
I checked the properties of the player, and it says that 604MB is used space, and the free space is 389MB, so I should be able to put more songs on there. I am confused as to where the space has disappeared to. When trying to transfer songs, an error message pops up and says there is a transfer error has occured while transferring this file, and so it cancels the transfer. I think it has something to do with the amount of space, but I am not sure.
Sorry to be of a nuisance again, but is there anything that I can do?
Thanks again,
Vanessa.

plum_juice0 wrote:
My sister has the GB Zen MuVo V200 and hasn't filled the capacity yet, but the player won't allow her to put any more songs onto it.
It pops up a message saying that: "Your Music Library is corrupted and cannot be recovered. MediaSource will now revert to your most recent back-up available. Would you like to continue? Yes/No."
Even if I click Yes or No, I need to download some Microsoft jet pack software, I haven't a clue what it is!
I checked the properties of the player, and it says that 604MB is used space, and the free space is 389MB, so I should be able to put more songs on there. I am confused as to where the space has disappeared to. When trying to transfer songs, an error message pops up and says there is a transfer error has occured while transferring this file, and so it cancels the transfer. I think it has something to do with the amount of space, but I am not sure.
Sorry to be of a nuisance again, but is there anything that I can do?
Thanks again,
Vanessa.
As SSR has said, the PC Music Library error is a MediaSource problem.
The reason that you haven't managed to fill up your player is covered in SSR's FAQ post. Look for a section titled "I can't seem to fit any more files on my flash player yet I have free space, why?".
PB

Similar Messages

Mac Mini and MuVo V200 problem

I have Mac Mini .83 a few months now. Yesterday, I've, for the first time, tried to connect my MuVo V200 via USB. The problem is that Mac simply can't see MuVo at all!!! With other devices I have no problem. What I suppose to do?
Thanks anyone who can help?

Did you have the Mac before you bought the Muvo V 200? You should have read the box and listed requirements,if you bought this yourself. Below are the minumum requirements for the Muvo V 00 or 200.
Intel Pentium II 350MHz or AMD K6 -2 450MHz http://images.americas.creative.com/images/spacer.gif http://images.americas.creative.com/images/spacer.gif http://images.americas.creative.com/images/bullet.gif Microsoft Windows 2000/XP http://images.americas.creative.com/images/spacer.gif http://images.americas.creative.com/images/spacer.gif http://images.americas.creative.com/images/bullet.gif 28 MB RAM http://images.americas.creative.com/images/spacer.gif http://images.americas.creative.com/images/spacer.gif http://images.americas.creative.com/images/bullet.gif 70MB free hard disk space http://images.americas.creative.com/images/spacer.gif http://images.americas.creative.com/images/spacer.gif http://images.americas.creative.com/images/bullet.gif CD ROM Drive http://images.americas.creative.com/images/spacer.gif http://images.americas.creative.com/images/spacer.gif http://images.americas.creative.com/images/bullet.gif USB .
luvmyrescuedogs

A Problem With Muvo V200 !!

Hi everybody, I've bought a Muvo V200 GB, and it works well , less one thing:
When the blue light is activated I feel a very "high-pitched" sound, and it's very unpleasant.
Can somebody tell me if there is a firmware that fix that problem ?
I've tried to format the usb flash but I still have this problem. And I've also seen some posts in other forums that complain about that.

No, the problem is with the V200 hardware itself, not the headphones. But using a higher impedance phone results in this high frequency noise being greatly attenuated. Being a hardware issue, there is no possible firmware fix for this. The only option is to go to a higher impedance phone (the Koss KSC-75 sounds great and is available for $5 from amazon.com) or li've with the problem. You can of course set the player to have the backlight always off - this will also eliminate the problem except at startup but will make adjustments more difficult in the dark.

Zen Sleek Docking Station (Also Muvo V200 Battery Pack) Quest

Does anybody know when the Zen Sleek docking station will be back in stock, or is it in stock anywhere else? I was hoping to get it before christmas. Is there a new one coming out becuase of the Zen Sleek Photo release?
Also I have a Muvo V200, is the Creative? MuVo? NX / MuVo? TX Battery sold in the creative store compatible with this product?
Thanks for the help

The battery pack for the V200 is a different size/shape to the one for the TX, NX, TX FM etc. More important I suppose is whether the actual MP3 module is the same size or not; whether the V200 module will fit in the TX battery compartment or not.
Creative's official answer will probably be that they are different. On first looks they appear different but someone with both players might be able to give you a better answer.
PB

MuVo V200 serious problem

Ive got my MuVo V200 like one and a half of month, and three days ago I was copying music on my MuVo, then after i left home i accidently dropped it from like m. And since that time when i listen to music it suddenly turns off after few minutes... What could happen? :| Nothing is broke...
Anyone could help me? :|

Go to this page, and click on the link for the .0.04 version. Then download the file from the page that appears. Then follow the instructions back on this page again to install the firmware.
PB

Double installation : muvo v200 and zenmi

Hi ,
I'm new in mp3 player world and i bought one creative player : muvo v200 and installed it correctly;
In a second time i bought a Zen Micro and i wonder if i must install it with CD or simply connect it ?
If i install the Zen micro with cd , the first player muvo v200 will be recognizable as it does ?
And then i can use both players without any problems ?
thanks in advance for answers
Christian

You should always install the software from all your product CDs. Don't worry about double installation. The installation program will know whether to overwrite the files. For example, if the software that came with the Zen Micro is newer, than it will overwrite the same software that came with the MuVo v200. Different product CDs may also install different plugins for your different MP3 players.

The MuVo V200 beltclip is a joke, Now I have no player. What Can I

Hello all, I'm very disappointed with the Muvo V200 Beltclip. I have had my Muvo since the 9th Jan 2005 and have been using it all the time and had no problems with it what so ever. But yesterday I had taken my player out with me. I had it connected to the beltclip as always. I had taken my headphones out of my ears when I was asking some bloke a question and did not but them back in till about 0 minutes later. When I put them back in I went to turn my player on, But I could not feel it, I look on my belt and all that was there was the dark grey clip that held the player to the belt. I still had the head phones but they must unplugged when the player fell. I retraced my steps but I had no luck finding my player.
All I have now are the Headphones and a dark grey clip, But looking at the dark grey clip there is a hole at the back, which I think something should have been there.
So as you can imagine, I'm very disappointed. What I would like to ask is, Is the loss of my player covered by the English Warranty?
Because I do believe the Beltclip had failed, letting the player fall from my belt. I done my best to find it, but as I said, to no luck.
All thats left now is the part of the clip and the headphones.
<IMG height=295 src="http://thegooddrmartin.co.uk/images/image.jpg" width=35>
sorry for the poor pic (taken on my phone)Message Edited by DrMartin on 04-04-2005 0:42 AM

On the day it happened I was wearing a shirt that covered the top part of my jeans, So only the headphones would have let people know Im carrying a player, If someone was to take it, the only way to remove it would be to lift it, but I still had the clip part of the holder. If someone did take it by ripping it off I would have known about it.
Ok as for it not disconnecting from the headphones I don't know, My headphones did not fall with it, and I did not feel it falling. What I do know is that I have lost my gig V200.
I will phone Creative first thing Monday, But what I was looking for here was someone who might have had the same thing happen with the V200 or another MP3 player, and did the Warranty cover it's

MUVO V200 Help Required

Hi,
I recently purchased a MUVO V200 with 52 mb memory.
My first problem was the FM radio would not work, but I have since put this down to it requiring more power from the batteries than standard music. Bit of a pain as my rechargable batteries, even when fully charged won't allow the FM radio to work. Is this normal?
My main problem; is since reformating the dri've and loading new firmware, the player will only store 00 songs, the packaging advises 256 songs. Can anyone explain if there is anything I can do to enable me to load more songs.
Any advice would be appreciated.
Thanks
James

I have Uniross 770mAh, Energizer 850mAh and Hahnel 900mAh, all .2V and all work fine.
You can convert the files you have to a different bit-rate using the Audio Converter function of MediaSource that came with your player. If you use MediaSource to rip your CDs then you can set it up to rip at a lower bit-rate right from the start.
MediaSource and V200 Media Explorer also have a SmartFit function where the files can be reduced in size as you transfer them to your player, though this slows down the transfer process and you would have to do it again if you reloaded the same files again at a later date.
If these are files from an online music store then you probably can't convert them directly because of the license issues, but you can burn them to an audio CD then re-rip them at a lower bit-rate. If you use a CD-RW then you don't end up wasting a load of CD-Rs.
PB
Message Edited by PeeBee on 0-27-2006 05:09 PM

MUVO V200 - Disk Drive is F

I am having a problem with the disk space of my Muvo V200.
The capacity is GB but yesterday when I tried to copy 600MB of mp3 files I got the message that disk dri've is full.
The player was empty. I formatted it but there was still the same problem. There was not any hidden file in my player of in the files that I tried to copy.
I am starting to copy the files and when I receive this message I go to the properties and it says that I have USED SPACE:540MB and FREE SPACE:453MB.
Despite that I cannot copy all my files.
Does anyone knows wht is going on?
Thank you.
ArisMessage Edited by aris on 0-3-2006 07:34 AMMessage Edited by aris on 0-3-2006 07:35 AM

Please read the FAQ - this is covered there.
PB

MuVo v200 cannot transfer mp3 f

I have a GB MuVo v200 player. I have so far used up 508mb of my disk space and have 486mb free space.However, when I try to transfer another mp3 file by drag and drop method, the error message appear: Cannot create or replace (filename). The directory or file cannot be created.
Can somebody please help .

I also have a MuVo V200 GB MP3 Player and have the same problem. I get the "Cannot copy {Song name}: The directory or file cannot be created" message when I try to drag and drop the song. I have 42 MP3s and WMAs taking up 535MBs. I also get an "Access denied" message when I try to create a new folder, and a write-protection message when I try to drag and drop one in (One without music). I've also tried to move the music over in the Creative Organizer whoever get "An error occured" message. I also can't create a new folder on my MP3 Player in the organizer using the "New" button.
Any help would be much appreciated.
Thanks,
Dynamite_Kid

My MuVo V200 doom

so here is the thing:
i bought my muvo v200 maybe few years ago and it has been working perfectly since it started to have problems connecting with my pc. it couldnt kinda connect with the pc. when i put it into my usb port the sound of "new device connected" played and right after it the sound of the device is unplugged and again connect/disconnect sound and it keeps doing that as long as the stick is put into the usb port.
so when it was doing that first time the problem disappeared eventually. but now the problem appeared again and it wouldnt disappear. so i read about the recovery device and tried to do the things mentioned in that post, even more problems appeared. before that event i was able to listen music with the player but couldnt connect it with my pc. now, when i tried to flash the new firmware on it there was an error which said something about timeout during the update and then the update was cancelled.
well there was that text blinking that do not disconnect the device during update, and then the error came so it kinda disconnected it during the update. now i cannot even put it on anymore, so i cannot listen to music anymore with my muvo .
i've tried to connect it with my second computer which just have been formatted and windwos has been reinstalled on it. same problem there with connecting and updating.
even my computer's bios displays that 4 usb devices are connected, and when i put muvo to the usb port it shows 5 devices connected, and after a few seconds it shows 4 and again 5 and so on...
is there anything i could do or is my player completely doomed?

If the firmware download was interrupted unfortunately the only way to fix the player is directly reprogramming the ROM, which is beyond what a user can do. You'll most likely have to pay for Creative to repair the player.

HELP!!! MuVO V200 Fat32 NO RESPOND

I have big problem. I have MuVo V200 and i format it using FAT32. My Mp3 no responding. I can't format it to FAT/FAT6. My?system:?WINDOWS XP SP2. PLIZ HELP
!!! My mail: [url=mailto:[email protected]">[email protected][/url]

Try putting the V200 into Recovery Mode first. This is done by holding the play button and then connecting the V200 to your PC via the USB port.
When it is in Recovery Mode then try loading the V200 firmware.
To put it into Recovery Mode you might need these drivers:
http://uk.europe.creative.com/suppor...ame=Windows+XP
Download and install these to your PC first.
PBMessage Edited by PeeBee on 08-22-2005 05:36 PM

Muvo V200 turns off when trying to enter the FM Radio opt

My Muvo V200 (52MB) stopped working. I was not able to turn it on: after pressing the power button the CREATIVE text was displayed and that was all. To solve this problem I've reinstalled the firmware (.2.03e version). The player is ali've now, but the FM Radio stopped working. When I try to use the FM Radio option, the player just turns off.
How can I solve this problem? Is there any way to install an older firmware vesrion?

Yes, I did - with no result.
But your advices lead me to one more solution, of which I hadn't thought before. I've tried to install the latest firmware (.2.03) in the recovery mode. And guess what? My V200 is fully functional again.
I'm not quite sure if it was the recovery mode or the slightly different file version which made the trick. This time I've used the MuVoV200_PCFW_LF__2_03.exe file (without the "e" suffix). But I'm almost sure I've also tried it in the normal mode before, which lead me to the broken radio function as in case of the MuVoV200_PCFW_LF__2_03e.exe file.
What are the differences between MuVoV200_PCFW_LF__2_03 and MuVoV200_PCFW_LF__2_03e? After extracting these files I can see that their contents differ.

MuVo V200 + Rechargeable Batter

Hi, i have bought a MuVo V200 in Hong Kong, but i don't know how to type chinese, and i li've in Canada, so i am posting here
The problem i have is i bought Engerizer Rechargerable batteries, and the charger.
But it won't work because it's .2V and the MuVo V200 needs .5V
Does anyone know how i can solve this problem or any suggestions of other brands of rechargable AAA batteries that's .5V?
Thanks
Konosuke

No, I don't think that normal batteries have less than 850 mAh of capacity.
It might be that my player does not empty the batteries completely, because it stops working properly at a higher voltage then other devices, but this can not be long before it is really empty.
My maximum playtime was a bit more than 7 hours with one charge and I think this is really nothing to complain about.
You should check if other owners of a V200 player have the same problem like you.
Then it might be that the V200 can not work long with rechargeables, but I guess its not normal that it works only for such a short time.

MuVo V200 Player suddenly dead and USB device er

My player MuVo V200 seriousely problem, suddenly dead after I was reload firmware and repair the storage driver, the USB could not read anymore in my computer, can you help me please !!!

Connect the player in Recovery Mode and reload the firmware again. Maybe try an earlier version - see the link in my signature line. PB

Zen MuVo V200 problem

Similar Messages

Maybe you are looking for