Zen Nano Plus and Real Player Music St

Anyone know how to get .rax files purchased from the Real Music Store to load onto the Nano Plus?

[size="2" face="Comic Sans MS">I have the Real Player Plus version of 0.5, so hopefully your player will have some of the same tools. First, highlight the track you want to convert in Real Player. At the top of the page of your Real Player, click on Tools and you will find Convert Media Format. Click to open? and it should show the track you are wanting to convert and another pane with your options. You will have to use wma or MP3 for your Creative Player. [size="2" face="Comic Sans MS">If you don't have this converting option in Real Player, use dBPowerAMP music converter. You can find their site on Google and download a free version.[size="2" face="Comic Sans MS">Best wishes,[size="2" face="Comic Sans MS">luvmyrescuedogs

Similar Messages

  • Problems running creative zen nano plus and nomad muvo on same compu

    We have 2 nomad muvo mp3 players and now a zen nano plus .Have had constant problems with the media organiser .
    Installed zen nano plus and selected enable smart fit to get maximum amount of songs and it worked fine but as soon as we tried to install software for the 2 nomad players it would not work smart fit for any of them.
    Uninstalled everything and got the zen software in and it was running ok but then seemed to have problems and although smart fit was enabled it just copied files as the original mp3.
    It then fatally crashed yesterday and I am awaiting a replacement as I had only had it for 2 days.
    Is it possible to run all 3 and to be able to use smart fit on all 3 players or am I better off having just one working and using the file converter for the other 2.

    <FONT face=Helv size=2>
    Make sure that you have installed the MediaSource plugin for MuVo in order to get SmartFit You have to access SmartFit via the MuVo node of the Sources window in MediaSource. You won't see SmartFit if you access your MuVo via the My Computer node of the Sources window in MediaSource..
    Here is what you should do to get the latest MediaSource software:
    - Download and install the latest Creative MediaSource Player/Organizer 3.30.2 from your product download site.
    - (Depending on your firmware)
    Download and install the latest Creative Zen and NOMAD Jukebox plugin 2.00.9 for Creative MediaSource from your product download site.
    or:
    Download and install the latest Creative MediaSource Plugin for PlaysForSure devices (version .00.8) from your product download site.
    - Download and install the latest Creative MuVo plugin .0.05 for Creative MediaSource from your product download site.
    - Download and install the latest Creative MediaSource Plugin for CD Burner 3.0.8 from your product download site.

  • Zen Nano Plus - can't move music to it all of a sud

    My daughter has had a Zen Nano Plus for about 4 months - no problems up to now. She wanted to put some new music on it, and no matter what we try, we get an error - Transfer error - an error has occurred while transferring this file. I've tried it using a variety of software as well as drag and drop. We just bought my other daughter the identical player, and I can move music to hers with no problem - so it's not the computer or the connection. Any ideas? The player works fine with the music that's on it. Any ideas, or is it RMA time? Thanks!

    Hi. What sounds like the same problem has happened to me my first time using the player. It's basically behaving as if it's full, when there is over 6MB of free space left. I read a thread on Amazon (from where I bought the player) and apparently this is a common problem with the Zen nano plus, so Amazon can't/ won't replace players with this defect :-( Do any experts out there think that the response to this problem could fix my issue too? So from now on I should transfer files into folders, instead of trying to transfer 500 songs all in one go? Cheers!

  • Zen Nano Plus and audible

    Hi, I subscribed to audible. From all MP3 players I have the only one audible manager recognizes is Creative Zen Nano Plus. When I try to transfer to player I get message that my program in format 4, creative supports format 2 and 3. Is there a way to upgrade my software? Thanks

    You will not be able to upgrade the player itself to play format 4. It only plays 2 or 3.

  • Zen Nano Plus and N200- the sa

    Yesterday I ordered a N200... or a Nano Plus, actually i don't know since the title said Zen Nano Plus, but the pictures and text said N200. Of course I asked support which I was going to get when I ordered and in their reply they said they are the same but with different name... so I don't really know what i'll get tomorrow, but then I guess it won't matter if they are the same with different name... But are they really the same?

    Hello,
    Just so you don't make a mistake, the 200 and the Zen Nano Plus were different for me. Both I bought were GB but the software was different on the N-200. I was told NOT to load the N-200 on the Zen Nano Plus. I also bought Notmad software and they said that the ZenNanoPlus would be supported soon.
    I mistakenly thought I had to upgrade the firmware to get Audible compatibility. I did not. It was Audible ready out of the box. It was .00.02 from the factory. I got 2 different Creative support people telling me 2 different things...including how to upgrade the firmware with N200. One support said DO NOT do it.
    Finally I got someone who said it was audible ready as it is. I tried it and it worked perfectly. So...just check. I am not sure who was right. All I know is I blew one up once trying to upgrade and I am real cautious now. At this time, I would not trade the Zen Nano Plus for anything......except perhaps for a copy of the new firmware for the Zen Touch ! Had to get that in.

  • Zen Nano plus and recargable batterie

    As per topic, can you use rechargable batteries for the above? If yes then gonna have to find some that are good quality and will last long(er). he he

    The relati'vely new Sanyo 000 mah nimh AAA batteries might provide the longest run time of all the AAA rechargeable batteries. Also be sure to get a charger that is meant for nimh batteries, and that has a separate charging circuit for each battery(usually a separate charging indicator light for each battery). Many chargers only charge batteries in pairs. If a charger only charges batteries in pairs, then in addition to having to charge an even number of batteries at a time, it will not be good to charge batteries that were used separately and are in differents states of discharge on the same charging circuit as one might be undercharged or the other overcharged.
    Message Edited by JK23 on 09-22-2006 0:6 PM

  • Zen Nano Plus - Connection Problems and Firmware Upgrade probl

    Like many others posting on this forum, for a while I had problems trying to get my GB Zen Nano Plus to be recognized by the .0.03 Firmware Update software.
    I eventually got it by doing this:
    While the Firmware Update software was "Searching" for a device, I kept on unplugging and plugging in the Zen Nano Plus from the USB cable while holding down the Play button, unti it "caught". I tried this since I noticed it would initially see the unit saying "A device has been detected in recovery mode...", but then throw the unit into "non-recovery" mode and hence force the Firmware Update software to keep on searching.
    Anyhoo, after it did finally "catch" it (after about 0 times unplugging/plugging while holding the Play button down), it showed my firmware as .03.02, and so I did the upgrade to .0.03. The upgrade said "Complete". I then take the unit off of USB, and put my battery back in. and. uhm. well. Now it won't turn on at all. *sigh*
    So there I go again in the "unplug-plug" loop on trying to get the older .03.02. Finally caught after about 30 times (yes my hands are tired). And after downgrading to .03.02, putting the battery back in, the unit turns on fine.. WHEW.
    So, beware to everyone. Not sure if I'd trust the .0.03 Firmware. Doesnt seem to work on my Zen Nano Plus, and I JUST bought the thing from Circuit City about a week ago.
    And for those of you having problems getting the Firmware Upgrade to work.. try my (tiring) method.
    I tried this on my Dell D600 laptop (actually used the USB ports on the docking station).
    -taka

    lcvdw wrote:Can you tell me what I am supposed to see if it is connected properly?
    With your player connected and View, Devices by Connection selected in Device Manager navigate through as follows:
    Advanced Config and Power Interface (ACPI) PC
    ->Microsoft ACPI-Compliant System
    -->PCI Bus
    You should then see a series of USB Host Controllers that you will have to click through in turn to find the one your player is connected to.
    Underneath each controller should be a USB Hub, and then devices are listed beneath the hubs.
    For my N200 I have USB Mass Storage Device, Creative MuVo N200 USB Device then Generic Volume.
    Your entry should be similar but with Zen Nano Plus instead of N200.
    While you're there, right-click on the entry for the hub attached to your player and select Properties. On the Power tab it will show how much current the port can supply and in the Attached Devices list it will show how much power the player needs. In my case the hub supplies 500mA and the player needs 00mA.
    PB
    Message Edited by PeeBee on 2-30-2005 02:05 PM

  • Zen Nano Plus: Line in recording from micropho

    I've got a Creative Zen Nano Plus and was very happy about its ability to encode MP3s from the line in jack.
    Since the integrated microphone is not very good for recording (especially loud music) I tried to connect a microphone to the line in jack. Unfortunately I had to recognise that it doesn't record anything no matter if "Sync Track" is on or off.
    I'd be glad if someone can tell me what exactly the problem is. Do I need some kind of special microphone (I read somewhere that it has to be "pre-amped", whatever that may mean) or is the line in jack designed for just recording from devices like a CD player? Help is very much appreciated. :-)

    Big bump.
    I did some research quite a while ago and thought that I should report the results for people also having that problem.
    A line-in jack is not a microphone-in jack. The difference between them is that the former is not supplied with electricity, so it can't power simple external microphones on its own. Thus, a real microphone-in jack is needed, though none of the Creative products has one included. You will still need a pre-amped microphone to get recordings with proper volume, though. A good and cheap solution is the Archos Stereo Microphone that comes with a preamplifier including volume adjust (http://www.archos.com -> Accessories -> Audio accessories).
    Microphone-in jacks can be found for example in the iri'ver iFP-7** and iFP-8** series. Since this players are discontinued and newer models don't have these jacks, it's kind of hard to still use that feature.

  • Zen Nano Plus Volume Trou

    I have a Zen Nano Plus, and for some strange reson the 'volume up' button won't work, yet the 'volume down' button will. I pressed the 'volume down' button too many times, however, and now the volume is on 0. I can press 'volume up' all I want, yet nothing happens. I would appreciate some help, because I really want to listen to my tunes.

    It could be a hardware fault as BaconBits suggests but it might be a firmware glitch. Try reloading the firmware. Even if it is hardware then the firmware reload will set the player back to a default volume setting - at least then you can use it.
    You can get the latest version from the Creative Downloads pages or version .03.02 from DAPJukebox. Try to load the same version as you already have to save any other problems. Backup your music to your PC first.
    PB

  • Zen Nano Plus won't play MP3, can't convert to WMA, tried new firmw

    Help!
    I have just reloaded the firmware (and all my music) onto my Zen Nano Plus and it didn't fix my problem.
    I have mostly .wma files and they play fine. I have tried to load .mp3 files but my player just skips them. I tried using the Organizer software to convert the .mp3 files to .wma files and it says they are converted but I get about min of each song and that's it.
    So I don't know why I can't play .mp3 files and I also don't know why the .mp3's can't be fully converted to .wma's.
    Can anyone help?Thanks in advance,Marci

    Wave files will only play by tricking the player into thinking that they are wav files created by the voice recorder. Put wav file into a folder called Recorded Tracks and see if it plays. This will at least see if it will play something. How did you transfer your files?Try ripping a CD to wma files using MediaSource or Windows Media Player - sometimes the firmware gets in a twist and will play mp3s but not wmas, or vice versa. The solution to that is to reload the firmware - go to the Support->Downloads link at the top of the page to get the latest firmware for your player. Protected songs (wma files with DRM) need to be transferred using WMP or MediaSource to transfer the license across, but mp3 files can be drag'n'dropped in Windows Explorer. A protected song without a license will give the symptoms you detail. As it's duff from the start you might just want to take it back - but it's worth trying the firmware reload first to save you some bother. PB

  • Creative zen nano plus

    I´ve bought a creative zen nano plus and couldn´t make it work on my Mac. Does anyone knows if there is any restrictions for creative mp3 players to install on Macs? There´s anything I can do?
    Thanks

    Welcome To  Discussions marianamansur!
    As per this page ZEN Nano Plus - 1GB MP3 flash player stores 500 songs and comes available in 10 colors, these are the software requirements.
    "Microsoft® Windows® 98SE®/2000/Me/XP (Service Pack 1 or higher)"
    ali b

  • ZEN NANO PLUS PLAYING QUEST

    I just bought the GB Zen Nano Plus and I love it. But today something weird happened, it was playing through my songs as normal the at the end of a certain song when it went to the next track, this next track did not automatically start playing as it should, i saw the solid square icon meaning stop on the player, and to play the track i had to repress the play button then it played through fine, so i erased the track before the track that would not play thinking i would just reload it when i got home, but that didn't fix the problem so i also erased the actual track that would not play until i repressed the play button, finally after erasing a few more tracks in the sequence, it stopped happening, it was weird because everyother track just plays through one after another like it should, my play mode is on normal, each album that i have tracks from on my player is in a separate folder. i am going to reload the problem songs and see what happens, just thought it was weird
    any thoughts?
    thank you

    My N200 plays all the way through until the end of the last folder. You must have a different Play Mode set.
    PB

  • Zen Nano Plus -- "Cannot create file .

    Why not?! I've been transferring & deleting songs since I bought the Zen Nano Plus and now all of a sudden, I can't place songs into it. Help please.

    Have you put all of your files into the root folder?
    If so, create a sub-folder and put your files in there. Then you will be able to fill up the player.
    If not, have you tried reloading the firmware?
    PB

  • Zen nano Plus, say i have alot more space but i cant upload more so

    I just got the Zen nano Plus and it says on the organizer I have 698.3 MB of space left and I cant upload any more songs at all, anyone have an idea of whats wrong?
    thanks

    See the section "I can't seem to fit any more files on my flash player yet I have free space, why?" in the FAQ post.

  • Zen Nano Plus wont play for more than 5 seconds at a ti

    I recently bought a new Creative Zen Nano Plus and thought I was getting a good reliable product. It synced in WMP like it should but when I unplugged it from my computer and tried to listen to the songs it will boot up and start playing a song but then shut off 3 seconds later. I formatted it and updated the firmware and drivers on the player and my computer but it still wont play for more than a few seconds at a time. I tried changing the battery and leaving it plugged in but neither of the above worked. I would appreciate some help. Thanks.

    Same issue with me - only mine won't even power on now...
    I am waiting on reply from customer support...

Maybe you are looking for