Zen Nano Plus Battery co

I've just broken the battery cover on my Zen Nano Plus and customer support say they haven't got any replacements available. They suggested I did a web search to try and find one!?Does anyone know of an source for the battery covers? I also wondered if contacting support in another region (I'm in the UK and receivedthe reply from European support)? might be worthwhile - or possible. Thanks?Ian

Don't believe the last post about getting a replacement battery door. I bought three?Nano Plus's?about 6 months ago and the tab on one of the battery doors bent and finally broke off. Not only don't they have blue ones anymore, but they want $6 for a door and $6 dollars to put it in the mail. (They don't consider poor design a defect.)Message Edited by jcpny on 09-24-20070:42 PM

Similar Messages

Faulty Creative Zen Nano Plus Battery Co

Hello. I am new in this forum.
I bought a Creative Zen Nano Plus MP3 Player from the IT show in March this year and 3 months later, the tip of the Battery Cover CRACKS and now the Battery Cover cannot be fixed back to the MP3 Player.
Anyone here has SIMILAR EXPERIENCE with me?
I went down to CREATIVE INTERNATIONAL BUSINESS PARK to buy the Battery Cover but was told it was OUT OF STOCK and I need to wait. Does the CREATIVE MARINA SQUARE has a Customer Care Centre where I can purchase the Battery Cover? Hear from anyone in the forum again. Thanks

Yes, this is quite a common occurence on the Nano, Nano Plus and N200 as the catch is very flimsy. The one on the V200 seems sturdier.
An email to Support in your region should do the trick - in Europe they sent me one straight back in the post.
PB

Zen Nano Plus Battery D

After only a few months of careful use and while always keeping the player in its protecti've case, the locking tab has broken off my battery door. Creative wants me to pay $5 plus shipping for a replacement door. However, if the replacement is the same as the original, then I'm afraid it will just break again. I would be interested in other users' experience with replacement doors and how they have held up. If they are no improvement on the original, then I'll just save my money to put towards a more durable player.

I have received free replacement battery covers for both mine and my son's N200s. I have not used the replacements, preferring instead to use the rubber sleeve to hold the broken covers in place. The replacements are exactly the same as the originals so there is no reason to think that they won't break just as easily. Hold out for free replacements as the reason they break is down to poor design - they are just too flimsy to stand up to being used constantly. PB

Zen Nano Plus - Battery drains very quick

When I first got the unit, the batter would last a really long time. Seemed like more than 2 hrs. In the last 6 months, it's been draining brand new batteries in 4-5 hours. I've tried rechargeable as well as standard batteries. I have the latest firmware.

"When I put in a freshly charged 850Mah battery, the MP3 player shows only 2 bars which doesn't make sense. "
Don't pay attention to the battery gauge when using rechargeables. The battery gauge measures voltage, and rechargeables start out at a lower voltage than alkalines, so having the battery gauge start with two bars when using an nimh battery doesn't seem unreasonable. See what actual run time you get. See what run time you get with an alkaline. Don't worry about how long it takes the battery indicator to drop a bar.

Zen Nano Plus - Used Battery vs. New Battery Prob

I downloaded some WMA files from Walmart.com and successfully transferred them to my Zen Nano Plus. They played fine. But the battery, which was already low on power, died. I switched in a new battery and tried playing WMA files, but they would only play for about three seconds before the mp3 player shut off.
I switched back in the old battery and the WMA files played just fine.
Both the old and new battery play the MP3 files, so there's no problem there.
Is the problem related to voltage or something? Please help.

Known issue, check [url="http://forums.creative.com/creativelabs/board/message?board.id=dap&message.id=40235&view=by_date _ascending&page=">this thread[/url].
No solution yet, I'm afraid.

I LOST MY BATTERY FLAP in ZEN NANO PLUS //POLSKA POM

[eng]
hello,
i've got ZEN NANO PLUS, i lost my FLAP in ZEN NANO PLUS.
Where i can buy this flap? (
[pl]
witam,
zgubilem klapke do ZEN NANO PLUS, wiecie moze gdzie tak? w polsce dostane?
Moze byc nawet do muvo tx... blagam to wazne
kuba.

SWAT wrote:
ohhh man!! ((((((((((
It's not that bad - just contact Customer Support through the website. PB

Zen Nano Plus WON'T START / RECOVERY / RES

Hello ZNP friends and fellow victims of frustration,
I have the GB Zen Nano Plus and a Windows XP operating system. My Zen is just over 3 months old, and a few days ago I started having the "stuck on Logo or hour glass (building library) problem". Like many of you, it has frustrated me beyond belief in my attempts to correct it. I'm certainly not a computer whiz, but I'm fairly good at following clear, numbered, valid instructions. I have tried many of the offered cures for this problem as provided in the discussion forum. None have worked for me.
I have just stumbled onto/into the fix for the WON'T START / RECOVERY / RESCUE problem. At least, I hope it lasts. The bad news is that I don't know or remember the steps for the cure. The good news is that the problem can be fixed. In the frustration of trying a million variations on the steps offered in the discussion area, I happened to fix my nano plus. I was becoming like a hyper zealot playing a slot machine.
What I do remember is this:
) I did download the application ZenNanoPlus_PCFW_LF___0 and install it, and put an icon on my desktop so I could activate it easily.
2) I did double click it to call it up.
3) I attached my nano plus via USB to the computer. I don't remember if I had to do that before or after bringing up the above application. (You may have to try both.)
4) I did leave the battery out of the nano plus during this operation.
5) I was required to reformat the nano plus which eliminated anything on it. When the instruction came on to reformat, it said "... area" so I was worried that the reformat might include more than the device itself but it didn't.
6) Then I loaded a song, disconnected the device from the computer, put in a battery, and it started fine.
What a task that whole process was! Of course I'm not telling you anything new. I was tempted to just get on with life, but then I thought I should really share this with those of you who have been in the trenches...to let you know that a cure is possible.
Creative should really have a clear set of instructions by now for fixing this problem.
Good luck!
Buck

Have you updated the firmware? this could be the major cause. Also, MP3 has far fewer kinks as a uni'versal format than WMA. If possible, I highly suggest using MP3 on MP3 players.

Can't power on Zen Nano Plus

I have a Zen Nano Plus gb. The unit powered off so I replaced the battery as it was weak. Now it won't power up. I tested the batteries and tried different batteries. No help. The display blinks on and off at /4 second intervals. When I connect it to the USB port the display lights but without the Logo and my PC thinks it is unattached. Mine is about 0 months old. Does anyone know if it is still on warranty and what can be done? Thanks.

I just went to the page?http://us.creative.com/support/downl...ype=0&x=29&y=6and downloaded the Creative MediaSource Player/Organizer 3.30.2 file after filling all the info out in the drop down menus. I just installed it and I was good to go. The only issue I really had was installing the application from the CD which I mentioned earlier.But the application from the website installed with no problem whatsoever. I wish I could tell you something that would help as I know your frustration.Are you sure you downloaded the correct version for ME?You might ask someone if you really need this application to put music on you device because it seems like your device just acts like another dri've and you can just drag and drop into your device. I'm not sure about that so ask st so it doesn't mess up you player.or you might be able to use some other apllication to transfer your files to the player?Good luck and be persistent,JoeMessage Edited by joenanoplus on 2-26-200608:3 AM
Message Edited by joenanoplus on 2-26-200608:32 AM

1GB Zen Nano Plus player stuck in Radio mo

I have a GB Zen Nano Plus player. I use it every day, have since I got it 2 yrs ago. It has the radio feature. I switched it to radio the other morning and now it won't switch back to my mp3 music. When I push in the scroller to go to the menu, it takes me to the Radio menu and locks up. Won't scroll up, won't scroll down, can't up or down the volume, can't even turn it off... I have to remove the battery for it to quit. I have no clue what's going on. I connected it to my computer and formatted it....didn't help. Went here online and got the firmware update drivers....didn't help. I can still load music onto and play it while it's hooked to my desktop, but I can't use it any other way than radio when I'm using it solo. Any ideas?

Make sure to reflash the firmware in recovery mode (see instructions on Creative's support website), and also let the updater format the data area. If that doesn't work it's probably a hardware failure, I'm afraid...

Mass Storage Drivers to save Zen Nano Plus...[HALLELUJAH SOLVEDDDD!

Okay, my Zen Nano Plus was working fine until about two days ago, when it just started shutting off. The battery was full, and I switched batteries three times, but it still wouldn't stay on. I looked through the forums, and there was advice to update the firmware. [I had ..0] I downloaded it [.3.03], and ran it, but then it said that it couldn't find the hardware for the software [or the software for teh hardware?] and I didn't know what to do, but the computer [or whatever] decided to disconnect the Nano from the comp, so there was no firmware on the player at all. And now it won't turn on.
So I looked on the forums for THAT, and it was advised to download the Mass Storage Drivers, so I did. Only I don't know if I'm supposed to double click the icon and execute the program before I do the whole "push play before connecting the player to yor computer and continue holding play for ten seconds" thing, but I did, and I don't know if I was supposed to do, and somebody please help meh because I love my Zen and if he dies I am going to die as well. And be really bored during my classes.
Also, I am running on Windows ME.Message Edited by rubyandrest on 0-29-200708:4 PM

Dude...i have been a loyal customer of creative for years....i just updated my firmware on my nano plus and my zen shut down....no reset...nothing. i sent an email and i recieved a generic email about paying for contact help. they have lost a loyal customer and i am telling all of my friends to never buy a creative product. mine was fine and then i saw a firmware upgrade and thought, "wow, this would be great". then after installing it is useless. no help from creative at all. i have always had soundblaster cards and creative speaker systems so i figured id get their mp3 player...now i will never patronize their company again. go get an ipod. i am on payday! they will probably delete this post and deny me access to the site after this, but i am a marketing management major and this is a big No No for companies that wish to stay around. Creative will be gone in a few years if this is the service they offer.

Fm radio problem and speakers zen nano plus..

. Why does my zen nano plus automatically turns of when i use the fm radio even if it has full battery?
2. Why does my zen nano plus automatically turns of when i connect pc speakers even if it has full battery?
I NEED HELP!!!!!!!!!!!!!

Try reloading the firmware for your Nano Plus - that sorts out most problems with these players. Go to Support, Downloads and choose MP3 Players, Zen, Nano Plus. Make sure you follow the instructions carefully.
PB

Problem with Zen Nano Plus--Please He

I just bought a GB Zen Nano Plus about a week ago. It worked fine until I had to change the battery. Now every time I play the mp3 music it automatically shuts down. I messed around with it and I figured out that every time the backlght shuts off, so does the player. It only does this while playing mp3 music (I can isten to the radio for as long as I want). This is pretty wierd because when I use the battery that came with the player, which is almsot totally dead, it doesn't do that.
If anyone has had this problem or knows how to fix it, please respond.

Are you logged on as an Administrator?
PB

Zen Nano Plus wont play for more than 5 seconds at a ti

I recently bought a new Creative Zen Nano Plus and thought I was getting a good reliable product. It synced in WMP like it should but when I unplugged it from my computer and tried to listen to the songs it will boot up and start playing a song but then shut off 3 seconds later. I formatted it and updated the firmware and drivers on the player and my computer but it still wont play for more than a few seconds at a time. I tried changing the battery and leaving it plugged in but neither of the above worked. I would appreciate some help. Thanks.

Same issue with me - only mine won't even power on now...
I am waiting on reply from customer support...

Zen Nano Plus, blee

I have a Zen Nano Plus and every so often it makes this bleep/beep sound. At first I thought it was just the battery getting low but it doesn't seem to be. Is it supposed to do that?
Thanks.

Any pattern to when it happens? Does it happen when you play the files on your pc? Does it happen only when playing protected files? There might be some quirks with some protected files. I seem to vaguely remember reading something about that. If the files play perfectly on the pc, then installing the new firmware might solve the problem. Make sure you have copies of the files on the pc before installing the new firmware, as installing it will delete the files stored on the player.

Creative Zen Nano Plus Firmware Problem, AGAIN! (PeeBee HEL

Hi all,
I am new here and have read all the posts and FAQ's but couldn't solve my problem. Actually there is a post http://forums.creative.com/creativel...d=68923#M07024 which tells exactly my problem. Have tried the solution but didn't solve it.
So I am here asking again.
I bought a zen nano plus GB and downloaded the latest firmware(ZenNanoPlus_PCFW_LF__0_03.exe) and the latest mass storage driver (MStorage_PCDRV_LB__07_00_250.exe). When I put the player in recovery mode as the firmware is detecting devices the player takes it self out of recovery mode and back in mass storage mode how do i stop it from down that?
I am trying to update it because my player doesn't play wma files :angry:I have tried PeeBee's solution but it didn't work. I have taken the battery out, reconnected it and it is recognized in recovery mode. I run the firmware and the computer plays a sound, the icon of connection appears in the nano's lcd and it is out of recovery mode. Then firmware program tells me that the 'device state is not set' and after that the message 'put into recovery mode before updating firmware' Aaaaaarrrrrghhhh!
I'm also running windows XP SP2
Can anyone help me?
Thank you in advance
Marcelo Lopes
Rio de Janeiro - Brazil

Hello-
I had a similar situation develop. Did your error message say, "Media state not initialized?" Here is what the creative support site says:
If you receive a message "Media State is not initialized ..." while updating firmware for a MuVo or Zen Nano Plus player, it will be necessary to install the Player Recovery Device driver and then update the firmware.
. Download the latest driver if you have not done so. You can download it from http://us.creative.com/support/downloads, and file name is MStorage_PCDRV_LB__07_00_250.exe.
2. Install the latest driver by double clicking on the file name.
3. Unplug the player from a computer if it is plugged.
4. Remove the battery from the player (except Zen Zeeon which has a built-in battery).
5. Press and hold the Play button while connecting the player to the USB port.
6. Continue to hold the Play button for about 0 seconds after connecting your player is connected to the USB port.
7. Keep on holding the Play button till Windows displays the Find New Hardware dialog box.
8. If this is the first time a player is installed as Player Recovery Device, Windows will find a Player Recovery Device (or USB Device), and prompt you for drivers. Click on No, and select "Do not search. I will choose the driver to install". Windows will install the drivers automatically.
9. Double click on the latest firmware upgrade file that you have downloaded previously, and follow the instructions on the screen.
0. Format the player if you are prompted to do so.
It is recommended that you stop your player properly before physically disconnect it from your PC.
To stop your player in Windows XP, Windows 2000 or Windows ME
Click on the Safely Remove Hardware icon on the Taskbar, click Safely remove USB mass Storage device, and disconnect your play when you are prompted to do so.
To stop your player in Windows 98SE
Make sure that the icon below appears on the LCD screen again for at least fi've seconds before disconnecting your player.
Now, I did all of the above and still got the error. What solved the problem finally was to connect (using the above method - remove the battery - hold the switch, etc) to a DIFFERENT USB port. Then all worked well, and the firmware transferred. Don't ask me how or why.
Good luck.

Zen Nano Plus Battery co

Similar Messages

Maybe you are looking for