Zen Nano Plus: Can I connect to Aux input on my table rad

Only possibility would be from headphone output on Nano Plus to Aux Input on radio.... Not documented. My sister's Ipod can do this.

I believe it works the same way too. Gi've it try.
Jason

Similar Messages

Bought Zen Micro to replace Zen Nano Plus - Can't get it to work

HiSorry if this was answered somewhere, but maybe i'm just dense. Can't seem to get things going. I used to have a Zen Nano Plus which worked fine on my PC - Win XP SP2.Picked up a used Zen Micro - I thought that it would be better because of bookmarking - but I have yet to get it to work.Zen Micro says Version 2.20.05?Here is a list of what it says is loaded on my PC[Creative Product-PID][Installation Log]
8 May 2006, Creative Zen Nano Plus Pack
8 May 2006, Creative MediaSource Zen Nano Plugin .00.07
8 May 2006, Zen Nano Plus Media Explorer 2.00.0
8 May 2006, Creative Audio CD Ripper .60.0
7 May 2006, Creative MediaSource Plugin for CD Burner 3.0.8
7 May 2006, Creative MediaSource Player/Organizer 3.30.2
7 May 2006, Common Audio Driver Interface .03.29
3 May 2006, MediaSource AudioSync Plugin .0.03
3 May 2006, MediaSource NOMAD Jukebox 2/3/Zen Plugin .0.03
3 May 2006, Creative Music Store Plugin .00.09
3 May 2006, Creative MediaSource Zen Nano Plugin .00.03
3 May 2006, Creative MediaSource Player Skin Pack .0.06
3 May 2006, MediaSource NOMAD MuVo Plugin .0.0
3 May 2006, MediaSource CD-ROM Burner Component 3.0.
3 May 2006, MediaSource Detector 3.00.7
3 May 2006, Common Audio Driver Interface .03.
3 May 2006, Creative MediaSource 3.20.57
3 May 2006, Audio Device Selection .0.05
3 May 2006, Creative System Information .0.3
3 May 2006, Zen Nano Plus Media Explorer .0.03
3 May 2006, Creative Audio CD Ripper .60.06
Have tried to download drivers and software for Zen Micro. When I try to run it though, it does not install because it says that I do not have device connected. Have erased everything off of Zen Micro, but have not reformatted. When I attach Zen Micro to PC, Zen Micro displays "booted" & PC displays "Zen Micro" for a second or two, then switches to "MTP Device"?. Do I need to erase everything from the Zen Nano Plus first?2. What do you think my next step should be?Thx???

Welcome to the Apple community.
If you are referring to adding a secondary account, to a single device, then you can do this at system preferences >mail, contacts & calendars.

Zen Nano Plus can't see new so

I have a GB CL Zen Nano Plus with 208 (WMA) songs in 6 folders (352 MB space used). When I add new WMA songs, they show up on Windows Explorer File Manager but won't play on the MP3 player. When the MP3 player is unconnected to the computer, I can't even see them on the player. The WMAs are not protected; we tried WMP 9 and 0 to rip the music files from CD. Heard that updating the Firmware might fix, but wanted to be sure. Any suggestions?

There are too many folders on your player - the ZNP can only see a total of 60 folders including any that don't have any music directly in them such as Artist folders. Connect your player and use Windows Explorer to rearrange your player so it uses less folders. When you say that the files aren't protected are you sure? WMP rips CDs to protected files by default so check in Tools, Settings to switch off Copy Protected. PB

Zen Nano Plus - can't move music to it all of a sud

My daughter has had a Zen Nano Plus for about 4 months - no problems up to now. She wanted to put some new music on it, and no matter what we try, we get an error - Transfer error - an error has occurred while transferring this file. I've tried it using a variety of software as well as drag and drop. We just bought my other daughter the identical player, and I can move music to hers with no problem - so it's not the computer or the connection. Any ideas? The player works fine with the music that's on it. Any ideas, or is it RMA time? Thanks!

Hi. What sounds like the same problem has happened to me my first time using the player. It's basically behaving as if it's full, when there is over 6MB of free space left. I read a thread on Amazon (from where I bought the player) and apparently this is a common problem with the Zen nano plus, so Amazon can't/ won't replace players with this defect :-( Do any experts out there think that the response to this problem could fix my issue too? So from now on I should transfer files into folders, instead of trying to transfer 500 songs all in one go? Cheers!

Volume level ZEN NANO PLUS, can it be chang

I have a new ZEN NANO PLUS that I have bought in Spain.
I?ve had this model before and I know that, because of the EU ruling ( **bleep** those bureaucrats! ), the volume level is not as loud as the model you can buy in the US.
A few people have suggested flashing the firmware and installing the US firmware, has anyone tried this, and did they have any success?
I downloaded the US firmware and tried to install it on my player but no luck, and the player died aswell, but I?m not sure if I did the correct thing...
If anyone knows anything about this any info would be greatly received.
Thanks in advance
Neil

You shouldn't have problem using both player together in MediaSource even in transferring audio files(non-protected content). Are you referring to being able to playback PlayForSure subscription content? I doubt it is possible(personal opinion) for the player since I believe it's more to do with the hardware rather than software.
Jason

Zen Nano Plus - can it be used in MediaSource alongside an MTP play

I was just wondering whether there would be any difficulty in using a Zen Nano Plus alongside a Zen Touch MTP player with the newest version of MediaSource, given that the latter is MTP and the former is not. Could non-protected content be transferred directly from one device to the other without problems? Also is there any likelihood of an MTP upgrade for the Zen Nano Plus in the future, or is MTP only for hard-dri've players?

You shouldn't have problem using both player together in MediaSource even in transferring audio files(non-protected content). Are you referring to being able to playback PlayForSure subscription content? I doubt it is possible(personal opinion) for the player since I believe it's more to do with the hardware rather than software.
Jason

Zen Nano Plus: Can I make folde

52MB
According to the software program, I have 2 books in a Book folder and a bunch of songs in a Music folder. In the device however, both books and songs are in Music.
Can I separate the books and music into different folders on the device so I can find the books easily?
ty,
Tom

Hi PeeBee,
Thanks. I didn't realize about the Skip Folders function. I just did it, saw Folder of 2(Books), moved to 2 of 2(Music), and couldn't get back to Folder .
Then I turned the player off and on again. I went to Skip Folder. It's in Folder 2 (Music). When I try to skip to Folder it's cycling between songs, not folders.
My battery is almost dead. I wonder if that has anything to do with this malfunction(?)?
Also, I have been able to get to my books and Music all along without even realizing there were different folders or changing folders. How is that?
I try it again when I put in a fresh battery.

Creative Zen Nano Plus Media Explorer only works for administra

Creative Zen Nano Plus Media Explorer only works for the administrator account; for other users the message "The Zen Nano Plus is not connected. Please connect your Zen Nano Plus to the computer." is displayed, but it *is* connected and works under other programs.
Version is .0.03.
Thanks for any assistance.
Edit: System is XPMessage Edited by zigkill on 0--2006 06:23 AM

RMskater wrote:I think you need to change the permissions to "Everyone".
How exactly do you do this? I checked this out tonight - when I logged onto my PC using my son's Limited User account (XP Home, BTW) I could connect his N200 and see it in Device Manager and Windows Explorer but both Creative pieces of software (CMS and N200 Media Explorer) did not see that it was there!
I tried setting the Run As... properties for the CTMS.exe file to run as one of the Admin user accounts but kept getting an error about being unable to find a specific file (which is in the Media Explorer folder!). When I went back to using the current user the error stopped. Perhaps I need to set the Run As.. options on that file as well?
As we don't use DRM'd music this isn't going to be a problem but it would be good to find out the cause of this once and for all.
I'm going to see if WMP0 has problems as well or if it's just the Creative ap
ps.
PB

Zen Nano Plus Folder limi

Is there a limit on the number of folders that the g Zen Nano Plus can recognize on the screen? I can only see 33 folders. I can see all of my cd's that I have loaded when I view the Zen flash dri've with my explorer, however the last 5 cd's I have loaded do not appear on my screen and I cannot listen to them.

hello
im having a similar problem with my nano plus gb firmware version .
i have 25 folders with 34tracks both mp3 and wma loaded to my player and able to view them via windows explorer (xp sp2)
but when i disconect the player and view the folders im only able to view 9 folders and they are arranged out of order . i use the player to listen to audio books as well as music so having folders displayed in order is important.
i have tried naming the folders audio book , 2 audio book , and a audio book, b audio book but they still get mixed up
i have done a reformat in fat32 , should i do a firmware upgrade ?
i purchaced this player witha bigger memory and now find i cant use all of the gig :-(
any suggestions apreciated
regards
jugglematt

Can't power on Zen Nano Plus

I have a Zen Nano Plus gb. The unit powered off so I replaced the battery as it was weak. Now it won't power up. I tested the batteries and tried different batteries. No help. The display blinks on and off at /4 second intervals. When I connect it to the USB port the display lights but without the Logo and my PC thinks it is unattached. Mine is about 0 months old. Does anyone know if it is still on warranty and what can be done? Thanks.

I just went to the page?http://us.creative.com/support/downl...ype=0&x=29&y=6and downloaded the Creative MediaSource Player/Organizer 3.30.2 file after filling all the info out in the drop down menus. I just installed it and I was good to go. The only issue I really had was installing the application from the CD which I mentioned earlier.But the application from the website installed with no problem whatsoever. I wish I could tell you something that would help as I know your frustration.Are you sure you downloaded the correct version for ME?You might ask someone if you really need this application to put music on you device because it seems like your device just acts like another dri've and you can just drag and drop into your device. I'm not sure about that so ask st so it doesn't mess up you player.or you might be able to use some other apllication to transfer your files to the player?Good luck and be persistent,JoeMessage Edited by joenanoplus on 2-26-200608:3 AM
Message Edited by joenanoplus on 2-26-200608:32 AM

Zen Nano Plus Connection Probl

(2)Zen Nano Pluses. Both using firmware .0.03. One Red, one Black (Click and Clack always want to know what color car they are diagnosing...)
(2) Computers, both XP SP2 with all updates; one called Dad's, one called W's.
One Zen (for ID, the red one) has been used on Dad's computer without issues for about 3 weeks.
One Zen, new and color Black, works on Dad's computer, but not on W's computer. W's computer will not properly recognize either the new Nano (the black one) or mine (the Red one), in either Creative MEdia SOurce, or Zen Explorer, or Windows explorer.
First, I have read the FAQ's. I have uninstalled and reinstalled the Nano software. When I use PB's check odd things appear:
PB's check:
With your player connected and View, Devices by Connection selected in Device Manager navigate through as follows:
Advanced Config and Power Interface (ACPI) PC
->Microsoft ACPI-Compliant System
-->PCI Bus
You should then see a series of USB Host Controllers that you will have to click through in turn to find the one your player is connected to.
Underneath each controller should be a USB Hub, and then devices are listed beneath the hubs.
For my N200 I have USB Mass Storage Device, Creative MuVo N200 USB Device then Generic Volume.
Your entry should be similar but with Zen Nano Plus instead of N200.
While you're there, right-click on the entry for the hub attached to your player and select Properties. On the Power tab it will show how much current the port can supply and in the Attached Devices list it will show how much power the player needs. In my case the hub supplies 500mA and the player needs 00mA.
PB
What appears on Dad's computer, with either Nano, is USB Enhanced Host Controler, USB Root Hub, Generic USB Hub, USB Mass Storage Device, Creative Zen Nano Plus USB Device, Generic Volume. Again, either Nano works on Dad's computer.
On W's computer, after just having reinstalled the new mass driver, it is USB2 Enhanced Host Controller, USB Root Hub, USB Mass Storage Device, Disk Dri've. On restart from that, it reads Creative Nano Plus USB Device, with no "volume" underneath it, and the oddball icon is not there. I think the oddball icon is associated with the "Disk Dri've". Once it read under Creative ZEn Nano Plus, "Unknown Device". Also, when I attach a Nano to W's computer, it first seems to see the Nano in the New Device Found message, THEN while it is still attached, it says in another New DEvice Found mesage that it has found a Disk Dri've. It also shows some oddball icon I can't decipher, right next to the "safely remove Hardware" icon. The oddball icon does not appear on Dad's computer.
Any ideas?
Thanks.Message Edited by Bennyd on 0-0-2006 06:6 AM

NEWS!!!
Actually, we have 3 Zen Nano Pluses. Two (the black and the red) have .0.03 firmware. I have never connected the black or the red to W's computer and have it connect properly. In fact, I had just tried (again) to connect the black, it failed, I re-booted. Then, I connected the blue, with the old firmware, and it CONNECTED. I could see it in WIndows explorer as dri've F:, which never happened with either the red or the black with .0.03 firmware.
So, now what?

Zen Nano Plus connection problems - SOLVED (1/2/06)

I recently bought the Nano Plus. On first installation everything worked fine. I decided to upgrade to the latest drivers and firmware via downloads from the Creative site. At some point during the firmware upgrade, everything seemed to hang. Eventually I had to halt the process, disconnect the player and reboot.
When I plugged the player back in, it is detected as a USB Mass Storage Device, but Windows Explorer and the Zen Nano Plus Media Explorer both claim that the device is not connected.
Here's what I have done so far:
)Uninstalled all drivers and Creative software, rebooted, reinstalled drivers/software, rebooted. When plugging the player in, a brief window pops up saying Zen Nano Plus has been detected. This is followed by USB Mass Storage Device being detected (this window stays up a lot longer, sometimes more than 5-0 minutes before disappearing).
2)Another uninstall/reinstall, but this time with a registry cleanup in between. Same result.
3)Tried installing installation cd on partner's laptop and plugging in the player. Absolutely everything works fine. So it's not my player. There must be something I still need to do on my desktop to get everything to work again.
4)Have also tried plugging into every USB outlet on the desktop. No change.
My system:
Windows XP (sp 2)
3.2 GHz
Intel 865 chipset
2 GB RAM
My Zen Nano Plus is currently running .0.03 firmware (latest).
On this desktop I am running the latest drivers (Creative Mass Storage Drivers .07.00.250)
When the player is plugged in, device manager shows no problems. Under Disk Dri'ves, Creative Zen Nano Plus USB Device is listed (and says the driver is from Microsoft, 7//0, version 5..2535.0). Under USB, USB Mass Storage Device is listed (and says the driver is from Microsoft, 7//0, version 5..2600.0).
I have tried manually updating these drivers to anything listed in the Creative folders upon installation, but it does not detect anything. When I check the drivers listed on the laptop that works with the player, these same driver details show up.
Any advice would be appreciated. I certainly would hate to only use my partner's laptop every time I want to update my music. I am also frustrated and puzzled as to why my player first worked on my desktop and now doesn't.Message Edited by lcvdw on 0-03-2006 2: AMMessage Edited by lcvdw on 0-03-2006 2:2 AM

lcvdw wrote:Can you tell me what I am supposed to see if it is connected properly?
With your player connected and View, Devices by Connection selected in Device Manager navigate through as follows:
Advanced Config and Power Interface (ACPI) PC
->Microsoft ACPI-Compliant System
-->PCI Bus
You should then see a series of USB Host Controllers that you will have to click through in turn to find the one your player is connected to.
Underneath each controller should be a USB Hub, and then devices are listed beneath the hubs.
For my N200 I have USB Mass Storage Device, Creative MuVo N200 USB Device then Generic Volume.
Your entry should be similar but with Zen Nano Plus instead of N200.
While you're there, right-click on the entry for the hub attached to your player and select Properties. On the Power tab it will show how much current the port can supply and in the Attached Devices list it will show how much power the player needs. In my case the hub supplies 500mA and the player needs 00mA.
PB
Message Edited by PeeBee on 2-30-2005 02:05 PM

Zen Nano Plus - Connection Problems and Firmware Upgrade probl

Like many others posting on this forum, for a while I had problems trying to get my GB Zen Nano Plus to be recognized by the .0.03 Firmware Update software.
I eventually got it by doing this:
While the Firmware Update software was "Searching" for a device, I kept on unplugging and plugging in the Zen Nano Plus from the USB cable while holding down the Play button, unti it "caught". I tried this since I noticed it would initially see the unit saying "A device has been detected in recovery mode...", but then throw the unit into "non-recovery" mode and hence force the Firmware Update software to keep on searching.
Anyhoo, after it did finally "catch" it (after about 0 times unplugging/plugging while holding the Play button down), it showed my firmware as .03.02, and so I did the upgrade to .0.03. The upgrade said "Complete". I then take the unit off of USB, and put my battery back in. and. uhm. well. Now it won't turn on at all. *sigh*
So there I go again in the "unplug-plug" loop on trying to get the older .03.02. Finally caught after about 30 times (yes my hands are tired). And after downgrading to .03.02, putting the battery back in, the unit turns on fine.. WHEW.
So, beware to everyone. Not sure if I'd trust the .0.03 Firmware. Doesnt seem to work on my Zen Nano Plus, and I JUST bought the thing from Circuit City about a week ago.
And for those of you having problems getting the Firmware Upgrade to work.. try my (tiring) method.
I tried this on my Dell D600 laptop (actually used the USB ports on the docking station).
-taka

lcvdw wrote:Can you tell me what I am supposed to see if it is connected properly?
With your player connected and View, Devices by Connection selected in Device Manager navigate through as follows:
Advanced Config and Power Interface (ACPI) PC
->Microsoft ACPI-Compliant System
-->PCI Bus
You should then see a series of USB Host Controllers that you will have to click through in turn to find the one your player is connected to.
Underneath each controller should be a USB Hub, and then devices are listed beneath the hubs.
For my N200 I have USB Mass Storage Device, Creative MuVo N200 USB Device then Generic Volume.
Your entry should be similar but with Zen Nano Plus instead of N200.
While you're there, right-click on the entry for the hub attached to your player and select Properties. On the Power tab it will show how much current the port can supply and in the Attached Devices list it will show how much power the player needs. In my case the hub supplies 500mA and the player needs 00mA.
PB
Message Edited by PeeBee on 2-30-2005 02:05 PM

Zen Nano Plus: I can't get my CDs to play in original order...He

Hello. I'm new here.
I got a Zen Nano Plus 52 mb a few months ago. Installed the software on my computer. I'm not very computer literate.
Here's what's frustrating me: I can't seem to listen to my CDs in their original order.
) I put a CD in my computer
2) Whether I view the track list in Windows Media Player or in the Creative Media Menu the track list appears in its original order as seen on the CD.
3) I "rip" the CD to my Nano player.
4) When I disconnect the player and go to play the album the tracks are all mixed up and not in the original order anymore.
I've tried some different things but nothing seems to correct the problem. I'm hoping someone can direct me what to do. I'm very confused, as I don't understand much of the computer terminology I read.

As in other response, the Nano Plus does not read ID tag info for sorting (it does read part of the tag--song name---only for display while that song is playing). Tag info typically includes the track number. Windows Media Player plays tracks in order of track number contained in the ID3 tags. The Nano Plus only sorts by filename. You can rip your tracks in a format that is prefixed by the track number (for filename). This can be done in Windows Media Player and other programs. Somehow you ripped tracks without the track number first (which would solve your problem). You tracks should look like "0-Come Together-Bealtes.wma" or something like this. This is the FILENAME, as you would see in Windows Explorer. The track info is not visible in Windows Explorer views. You can see it from Windows Media Player or Creative Media Source Organizer, though. Other players like Zen Micro and Touch sort tracks and build the library database on ID3 Tag info, not filenames.

Zen Nano Plus- help can't turn it

I bought a Zen Nano Plus back in May, it worked fine until now. Now it will turn on half way then shut right off. My computer will recognize it, but the software won't. i can use all the help.

thanks, i tried it and now it works

Zen Nano Plus: Can I connect to Aux input on my table rad

Similar Messages

Maybe you are looking for