Zen Nano Plus - can it be used in MediaSource alongside an MTP play

I was just wondering whether there would be any difficulty in using a Zen Nano Plus alongside a Zen Touch MTP player with the newest version of MediaSource, given that the latter is MTP and the former is not. Could non-protected content be transferred directly from one device to the other without problems? Also is there any likelihood of an MTP upgrade for the Zen Nano Plus in the future, or is MTP only for hard-dri've players?

You shouldn't have problem using both player together in MediaSource even in transferring audio files(non-protected content). Are you referring to being able to playback PlayForSure subscription content? I doubt it is possible(personal opinion) for the player since I believe it's more to do with the hardware rather than software.
Jason

Similar Messages

Bought Zen Micro to replace Zen Nano Plus - Can't get it to work

HiSorry if this was answered somewhere, but maybe i'm just dense. Can't seem to get things going. I used to have a Zen Nano Plus which worked fine on my PC - Win XP SP2.Picked up a used Zen Micro - I thought that it would be better because of bookmarking - but I have yet to get it to work.Zen Micro says Version 2.20.05?Here is a list of what it says is loaded on my PC[Creative Product-PID][Installation Log]
8 May 2006, Creative Zen Nano Plus Pack
8 May 2006, Creative MediaSource Zen Nano Plugin .00.07
8 May 2006, Zen Nano Plus Media Explorer 2.00.0
8 May 2006, Creative Audio CD Ripper .60.0
7 May 2006, Creative MediaSource Plugin for CD Burner 3.0.8
7 May 2006, Creative MediaSource Player/Organizer 3.30.2
7 May 2006, Common Audio Driver Interface .03.29
3 May 2006, MediaSource AudioSync Plugin .0.03
3 May 2006, MediaSource NOMAD Jukebox 2/3/Zen Plugin .0.03
3 May 2006, Creative Music Store Plugin .00.09
3 May 2006, Creative MediaSource Zen Nano Plugin .00.03
3 May 2006, Creative MediaSource Player Skin Pack .0.06
3 May 2006, MediaSource NOMAD MuVo Plugin .0.0
3 May 2006, MediaSource CD-ROM Burner Component 3.0.
3 May 2006, MediaSource Detector 3.00.7
3 May 2006, Common Audio Driver Interface .03.
3 May 2006, Creative MediaSource 3.20.57
3 May 2006, Audio Device Selection .0.05
3 May 2006, Creative System Information .0.3
3 May 2006, Zen Nano Plus Media Explorer .0.03
3 May 2006, Creative Audio CD Ripper .60.06
Have tried to download drivers and software for Zen Micro. When I try to run it though, it does not install because it says that I do not have device connected. Have erased everything off of Zen Micro, but have not reformatted. When I attach Zen Micro to PC, Zen Micro displays "booted" & PC displays "Zen Micro" for a second or two, then switches to "MTP Device"?. Do I need to erase everything from the Zen Nano Plus first?2. What do you think my next step should be?Thx???

Welcome to the Apple community.
If you are referring to adding a secondary account, to a single device, then you can do this at system preferences >mail, contacts & calendars.

Zen Nano Plus can't see new so

I have a GB CL Zen Nano Plus with 208 (WMA) songs in 6 folders (352 MB space used). When I add new WMA songs, they show up on Windows Explorer File Manager but won't play on the MP3 player. When the MP3 player is unconnected to the computer, I can't even see them on the player. The WMAs are not protected; we tried WMP 9 and 0 to rip the music files from CD. Heard that updating the Firmware might fix, but wanted to be sure. Any suggestions?

There are too many folders on your player - the ZNP can only see a total of 60 folders including any that don't have any music directly in them such as Artist folders. Connect your player and use Windows Explorer to rearrange your player so it uses less folders. When you say that the files aren't protected are you sure? WMP rips CDs to protected files by default so check in Tools, Settings to switch off Copy Protected. PB

Zen Nano Plus - can't move music to it all of a sud

My daughter has had a Zen Nano Plus for about 4 months - no problems up to now. She wanted to put some new music on it, and no matter what we try, we get an error - Transfer error - an error has occurred while transferring this file. I've tried it using a variety of software as well as drag and drop. We just bought my other daughter the identical player, and I can move music to hers with no problem - so it's not the computer or the connection. Any ideas? The player works fine with the music that's on it. Any ideas, or is it RMA time? Thanks!

Hi. What sounds like the same problem has happened to me my first time using the player. It's basically behaving as if it's full, when there is over 6MB of free space left. I read a thread on Amazon (from where I bought the player) and apparently this is a common problem with the Zen nano plus, so Amazon can't/ won't replace players with this defect :-( Do any experts out there think that the response to this problem could fix my issue too? So from now on I should transfer files into folders, instead of trying to transfer 500 songs all in one go? Cheers!

Volume level ZEN NANO PLUS, can it be chang

I have a new ZEN NANO PLUS that I have bought in Spain.
I?ve had this model before and I know that, because of the EU ruling ( **bleep** those bureaucrats! ), the volume level is not as loud as the model you can buy in the US.
A few people have suggested flashing the firmware and installing the US firmware, has anyone tried this, and did they have any success?
I downloaded the US firmware and tried to install it on my player but no luck, and the player died aswell, but I?m not sure if I did the correct thing...
If anyone knows anything about this any info would be greatly received.
Thanks in advance
Neil

You shouldn't have problem using both player together in MediaSource even in transferring audio files(non-protected content). Are you referring to being able to playback PlayForSure subscription content? I doubt it is possible(personal opinion) for the player since I believe it's more to do with the hardware rather than software.
Jason

Zen Nano Plus: Can I connect to Aux input on my table rad

Only possibility would be from headphone output on Nano Plus to Aux Input on radio.... Not documented. My sister's Ipod can do this.

I believe it works the same way too. Gi've it try.
Jason

Zen Nano Plus: Can I make folde

52MB
According to the software program, I have 2 books in a Book folder and a bunch of songs in a Music folder. In the device however, both books and songs are in Music.
Can I separate the books and music into different folders on the device so I can find the books easily?
ty,
Tom

Hi PeeBee,
Thanks. I didn't realize about the Skip Folders function. I just did it, saw Folder of 2(Books), moved to 2 of 2(Music), and couldn't get back to Folder .
Then I turned the player off and on again. I went to Skip Folder. It's in Folder 2 (Music). When I try to skip to Folder it's cycling between songs, not folders.
My battery is almost dead. I wonder if that has anything to do with this malfunction(?)?
Also, I have been able to get to my books and Music all along without even realizing there were different folders or changing folders. How is that?
I try it again when I put in a fresh battery.

1GB Zen Nano Plus player stuck in Radio mo

I have a GB Zen Nano Plus player. I use it every day, have since I got it 2 yrs ago. It has the radio feature. I switched it to radio the other morning and now it won't switch back to my mp3 music. When I push in the scroller to go to the menu, it takes me to the Radio menu and locks up. Won't scroll up, won't scroll down, can't up or down the volume, can't even turn it off... I have to remove the battery for it to quit. I have no clue what's going on. I connected it to my computer and formatted it....didn't help. Went here online and got the firmware update drivers....didn't help. I can still load music onto and play it while it's hooked to my desktop, but I can't use it any other way than radio when I'm using it solo. Any ideas?

Make sure to reflash the firmware in recovery mode (see instructions on Creative's support website), and also let the updater format the data area. If that doesn't work it's probably a hardware failure, I'm afraid...

Problem with Creative Zen Nano Plus 1 GB mp3 player please r

I bought zen nano plus? month ago and while i was transfering music into it it crashed ,? it looked like its no more readable so i disconected it from my pc , it needed format , i did format and tried to transfer some music again but the same problem appeared . I thought the memory card of the player is damaged and needs to be changed or repaired? , i gave it to customer support and after a few days they said they installed newer software version to the player , well i thought it will fix the problem . Once i got home i tried to transfer music and it crashed again , i couldnt even format it cause when i plug in the mp3 F: ( usb dri've ) does not respond. I gave the mp3 to customer support again , they filled up the mp3 with music six times and everything worked fine. But at home it still crashes while transfering , so i dont know what to think . On the packet where the mp3 was when i bought is written WORKS WITH WINDOWS VISTA ,?currently i have windows xp ,? can it be that i can only transfer music without prloblems with windows vista ? can it be that zen nano plus is created to use with windows vista ? Thanks for reading !

Did you install the driver on your PC? If not, then do it. Try reformatting the player as FAT. Next try tranferring a few folders full of mp3 files. Use windows explorer to drag and drop the folders? with files to the player. Now see if the player will play them.

Zen Nano Plus Folder limi

Is there a limit on the number of folders that the g Zen Nano Plus can recognize on the screen? I can only see 33 folders. I can see all of my cd's that I have loaded when I view the Zen flash dri've with my explorer, however the last 5 cd's I have loaded do not appear on my screen and I cannot listen to them.

hello
im having a similar problem with my nano plus gb firmware version .
i have 25 folders with 34tracks both mp3 and wma loaded to my player and able to view them via windows explorer (xp sp2)
but when i disconect the player and view the folders im only able to view 9 folders and they are arranged out of order . i use the player to listen to audio books as well as music so having folders displayed in order is important.
i have tried naming the folders audio book , 2 audio book , and a audio book, b audio book but they still get mixed up
i have done a reformat in fat32 , should i do a firmware upgrade ?
i purchaced this player witha bigger memory and now find i cant use all of the gig :-(
any suggestions apreciated
regards
jugglematt

Can't power on Zen Nano Plus

I have a Zen Nano Plus gb. The unit powered off so I replaced the battery as it was weak. Now it won't power up. I tested the batteries and tried different batteries. No help. The display blinks on and off at /4 second intervals. When I connect it to the USB port the display lights but without the Logo and my PC thinks it is unattached. Mine is about 0 months old. Does anyone know if it is still on warranty and what can be done? Thanks.

I just went to the page?http://us.creative.com/support/downl...ype=0&x=29&y=6and downloaded the Creative MediaSource Player/Organizer 3.30.2 file after filling all the info out in the drop down menus. I just installed it and I was good to go. The only issue I really had was installing the application from the CD which I mentioned earlier.But the application from the website installed with no problem whatsoever. I wish I could tell you something that would help as I know your frustration.Are you sure you downloaded the correct version for ME?You might ask someone if you really need this application to put music on you device because it seems like your device just acts like another dri've and you can just drag and drop into your device. I'm not sure about that so ask st so it doesn't mess up you player.or you might be able to use some other apllication to transfer your files to the player?Good luck and be persistent,JoeMessage Edited by joenanoplus on 2-26-200608:3 AM
Message Edited by joenanoplus on 2-26-200608:32 AM

Zen Nano Plus- help can't turn it

I bought a Zen Nano Plus back in May, it worked fine until now. Now it will turn on half way then shut right off. My computer will recognize it, but the software won't. i can use all the help.

thanks, i tried it and now it works

Zen Nano Plus won't play MP3, can't convert to WMA, tried new firmw

Help!
I have just reloaded the firmware (and all my music) onto my Zen Nano Plus and it didn't fix my problem.
I have mostly .wma files and they play fine. I have tried to load .mp3 files but my player just skips them. I tried using the Organizer software to convert the .mp3 files to .wma files and it says they are converted but I get about min of each song and that's it.
So I don't know why I can't play .mp3 files and I also don't know why the .mp3's can't be fully converted to .wma's.
Can anyone help?Thanks in advance,Marci

Wave files will only play by tricking the player into thinking that they are wav files created by the voice recorder. Put wav file into a folder called Recorded Tracks and see if it plays. This will at least see if it will play something. How did you transfer your files?Try ripping a CD to wma files using MediaSource or Windows Media Player - sometimes the firmware gets in a twist and will play mp3s but not wmas, or vice versa. The solution to that is to reload the firmware - go to the Support->Downloads link at the top of the page to get the latest firmware for your player. Protected songs (wma files with DRM) need to be transferred using WMP or MediaSource to transfer the license across, but mp3 files can be drag'n'dropped in Windows Explorer. A protected song without a license will give the symptoms you detail. As it's duff from the start you might just want to take it back - but it's worth trying the firmware reload first to save you some bother. PB

I can't install the Zen nano Plus software on my pc. He

Hi,I've read some people have the same problem I do, but no solutuion. When I try to install the zen nano plus cd that came in the package, it comes up with a window saying : "the windows operating system running on this computer is not supported by this product". The nano plus is supposed to work with windows ME which I have?and I think I meet all the other requirements. Could they have mislabeled a cd?I tried installing it with the antivirus turned off with ca antivirus. Thanks for any help,Joe?

I just went to the page?http://us.creative.com/support/downl...ype=0&x=29&y=6and downloaded the Creative MediaSource Player/Organizer 3.30.2 file after filling all the info out in the drop down menus. I just installed it and I was good to go. The only issue I really had was installing the application from the CD which I mentioned earlier.But the application from the website installed with no problem whatsoever. I wish I could tell you something that would help as I know your frustration.Are you sure you downloaded the correct version for ME?You might ask someone if you really need this application to put music on you device because it seems like your device just acts like another dri've and you can just drag and drop into your device. I'm not sure about that so ask st so it doesn't mess up you player.or you might be able to use some other apllication to transfer your files to the player?Good luck and be persistent,JoeMessage Edited by joenanoplus on 2-26-200608:3 AM
Message Edited by joenanoplus on 2-26-200608:32 AM

Zen Nano Plus: I can't get my CDs to play in original order...He

Hello. I'm new here.
I got a Zen Nano Plus 52 mb a few months ago. Installed the software on my computer. I'm not very computer literate.
Here's what's frustrating me: I can't seem to listen to my CDs in their original order.
) I put a CD in my computer
2) Whether I view the track list in Windows Media Player or in the Creative Media Menu the track list appears in its original order as seen on the CD.
3) I "rip" the CD to my Nano player.
4) When I disconnect the player and go to play the album the tracks are all mixed up and not in the original order anymore.
I've tried some different things but nothing seems to correct the problem. I'm hoping someone can direct me what to do. I'm very confused, as I don't understand much of the computer terminology I read.

As in other response, the Nano Plus does not read ID tag info for sorting (it does read part of the tag--song name---only for display while that song is playing). Tag info typically includes the track number. Windows Media Player plays tracks in order of track number contained in the ID3 tags. The Nano Plus only sorts by filename. You can rip your tracks in a format that is prefixed by the track number (for filename). This can be done in Windows Media Player and other programs. Somehow you ripped tracks without the track number first (which would solve your problem). You tracks should look like "0-Come Together-Bealtes.wma" or something like this. This is the FILENAME, as you would see in Windows Explorer. The track info is not visible in Windows Explorer views. You can see it from Windows Media Player or Creative Media Source Organizer, though. Other players like Zen Micro and Touch sort tracks and build the library database on ID3 Tag info, not filenames.

Zen Nano Plus - can it be used in MediaSource alongside an MTP play

Similar Messages

Maybe you are looking for