Zen Nano Plus Lin In Iss

I have a Zen Nano Plus. I purchased it for recording church messages. I run the cord from the line in to the church sound board. The recording is good, however, the nano sometimes shuts down during the middle of the sermon. What would cause this problem
? Is there a special setting or fix?Please help

Hi,
Sorry to hear you are having problems. There is no setting for this as this isn't normal behaviour. I'd suggest loading the latest firmware onto the unit and also checking the box "Format Data Area" when given the option to during the firmwares install.
The firmware is available from here .
http://uk.europe.creative.com/suppor...ame=Windows+XP
Hope this hel
ps.
John

Similar Messages

Zen Nano Plus: Line in recording from micropho

I've got a Creative Zen Nano Plus and was very happy about its ability to encode MP3s from the line in jack.
Since the integrated microphone is not very good for recording (especially loud music) I tried to connect a microphone to the line in jack. Unfortunately I had to recognise that it doesn't record anything no matter if "Sync Track" is on or off.
I'd be glad if someone can tell me what exactly the problem is. Do I need some kind of special microphone (I read somewhere that it has to be "pre-amped", whatever that may mean) or is the line in jack designed for just recording from devices like a CD player? Help is very much appreciated. :-)

Big bump.
I did some research quite a while ago and thought that I should report the results for people also having that problem.
A line-in jack is not a microphone-in jack. The difference between them is that the former is not supplied with electricity, so it can't power simple external microphones on its own. Thus, a real microphone-in jack is needed, though none of the Creative products has one included. You will still need a pre-amped microphone to get recordings with proper volume, though. A good and cheap solution is the Archos Stereo Microphone that comes with a preamplifier including volume adjust (http://www.archos.com -> Accessories -> Audio accessories).
Microphone-in jacks can be found for example in the iri'ver iFP-7** and iFP-8** series. Since this players are discontinued and newer models don't have these jacks, it's kind of hard to still use that feature.

Zen Nano Plus 1GB Dead Lines (Pixels) on

Hi,
I recently bought a Zen Nano Plus from japan. Once I'm back to Thailand, I found my GB Zen Nano Plus has one line disappeared from the LCD. It was OK as long as I happy with the quality of it. After one month, there were 4 lines was disappeared from my LCD screen. Then I can't read my screen.
The question is, Now I'm in Thailand but I bought my Zen Nano from Japan. How can I claim my LCD to get it fix?
Please help ((

Hi Nitipong! the same happened to me, but I bought it in USA and now I'm in Brazil. What you did to get it fixed?

Creative Zen Nano Plus audio line-in recor

Im planning to buy Creative Zen Nano Plus GB.
. Does Creative Zen Nano Plus audio line-in recoreder offer excellent quality of sound music when you record a certain music through a CD player's line-in?
2. Please rate the quality of recorded sound music from to 0.
3. Does the recorded sound quality the same as when you just download the music file through your PC's USB connection?
thanks.

Is there something I need to set in the player to allow it to play out of it's line-in function?
You connected the ZNP's headphone out to your car|shelf|portable stereo's line-in, right? The line-in on the ZNP itself is only used to record external audio sources onto the player. The stereos may need to be set to play back from their line-inputs if they don't detect the signal and switch automatically, but that should be explained in the corresponding manuals.

Error Message when Trying to Rip to Zen Nano Plus

I use Zen Nano Plus Media Explorer and I get this message:
"Unable to lead database component. The program will now exit."
I can't figure out what is missing in order to correct the problem. Can anyone help me?
I use Windows XP Home on my HP Laptop.

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting.

Creative Zen V Plus Line In Record

Hi all
I am looking at getting a number of these for my workplace to use primarily as a line in/external mic recording device.
We have trialled a number of HD based recorders in the past; iRi'ver, Cowon but we have found the line in recording standard to be poor.
I was wondering if anyone has one of these and could tell me what the recording standards are like, especially regarding the volume levels of the line in recording?
The iRi'ver and Cowons both have line in recording but the volume level is so low it is pretty useless.
Thanks in advance
Tim

I use my Zen Nano Plus primarily for line in recording directly from sound systems. Line-in recordings are saved as MP3s and you can pick the encoding bitrate, either 96, 28 or 60. The recordings with the built-in microphone are saved as WAV files. I've found that for line-in recordings it's best to put in some headphones and check that the recording level (via volume control) is satisfactory. I've never used any other line-in recorders so I can't provide any comparison. Anyway, I typically use the free version of Wavepad to do an auto gain adjustment on the recordings. Hope I was of some help to you!

Zen Nano Plus--Nothing happens when I try to rip from my cd player to the Zen Nano pl

Please HELP!! I just bought my Zen Nano Plus last week(st mp3 player I ever owned). I've tried to rip cds from my stereo to the Nano but nothing happens. The encoding bar appears but shows no progress. Could I be plugging the cord in the wrong place? I plugged it in where you would normally plug in headphones into the stereo. Any suggestions?

I did get the line in connector, however, the only place it fits into the stereo is where you would normally plug in the headphones and that's where I plugged it in. As I mentioned earlier, the status bar does not show any progress when I press the play button.

I have a Creative ZEN Nano Plus

Can someone tell me how or direct me to the advantage on the Line In connection. How do I plug in to and transfer music from another CD or device to put music on my Player ?TC

I'm a bit unclear on how you do direct Line In recording, as I don't have a Zen Nano Plus- my brother does. We tried it a few times, but found that it was much faster to rip the CDs on the computer and transfer from it, rather than wait for the Zen Nano Plus to copy the CD in real time.
However, the Zen Nano Plus manual gives these instructions:
Synchronizing MP3 encoding
If you are encoding songs from a CD or MiniDisc, enable Sync Track (SYNC) so that your player will encode the songs from your source as separate tracks. Your player will automatically stop when the last song is played. Sync Track is enabled by default.
In the MP3 Encoding screen, press the Scroller.
Scroll Select the Sync Track option and turn Sync Track on or off. When Sync Track is turned on, appears at the top right corner of the MP3 Encoding screen.

Zen nano plus 1GB not fully connec

Just tried to connect a new Zen Nano plus gb to my XP machine. 
I can see it in Device Manager (both disk dri'ves and USB) and it says its working properly

But, it takes about 5 min to appear on Explore and then it freezes Explore and cant be read.

I have installed the Creative Mass storage drivers.

I've tried to update the firmware to .3.03 (from .2.03) but no go. It recognized it in recovery mode and sets a driver but the .3.03 install program takes it out of recovery with no changes to the firmware (it keeps searching for a compatible device with no luck)

I have also tried different USB ports, checking the power lever (which is OK) and assigning a device letter but Disk Management wont see it until after 5 min and then the device is not available

Very Quirky - any suggestion?

I'm about to send it back (very disappointed with Creative Support as I own Jukebox III and just lost my MuVo.

Thanks in advance,
David

Yes, thanks,?
I tired that and so many more things (restarting, deleting driver and re-installing, deleting media program, different USB ports, checking power allocations for ports, different cables etc.)
I'm a smart guy (BSEE) and spent about 5 hours trying to get this thing to work and no go - still quirky so I just dropped it off at the Post Office to return to Amazon.
Honestly, it not worth my time to spend 5 hours trying to get it to work after paying good money for it. Poor QC testing, poor firmware, and poor support.
What I don?t understand is why Creative doesn?t admit that these devices have a problem and either recall them or fix them. Look at the number of hits the "Zen Nano Plus Connection Problems " thread has! Over 200 hits.
This is obviously a problem and they have their head in the sand. And it irks me when companies do this; release a product that is faulty and let their customers sort it out.
I suggest a thread that logs the problems with respect to each device.
Example:
Thread: Zen Nano Plus Problems:
) connection problems: 493
2) Automatically powering off problems: 327
3) Etc
Each person could add their one occurrence to the running total and someone could sort through and actually find the number of occurrences a problem happens. This can get a company to own up to larger design and QC issues which they shove out the door to boost the bottom line.
But what do I know, I just stumbled upon this site googling ?Zen Nano Plus Connection Problems?
I'm moving on now and thank everyone for their help.
Best of luck,D

Zen Nano Plus/MuVo TX FM/MuVo V2

I'm contemplating buying a Creative MP3 player, but I've never had one before and I'd like to know about a couple of features. What's really pressing on my mind is if the players support folders, meaning if I can chose a folder and play all the songs inside, or if the player just takes all the songs in all the folders, sorts them alphabetically and plays them.
I want a player with GB memory, and I'd like to use it as a USB storage, too, so it should support other filetypes. Radio would be great, and I'd like to know if the radio also functions when I'm on holiday in another country, maybe even on another continent.
Until now, it seems that the Zen Nano Plus, the MoVo TX FM and the MuVo V200 are my most likely choices, plus, I like their design and they're not too expensi've. But before I buy any of them, I'd really like to know all the differences between them, so I can make the right decision. It would be great if you could help me with that.
Thanks! AldaraMessage Edited by Aldara on 0--2005 07:08 PM

I can offer some questions answered for the N200/Nano Plus, there are many others here who are more knowledgeable on the flash players.
The Nano Plus does allow you to pick each folder and play them, depending on your play mode (shuffle, normal, repeat folder etc), the folder will play how it's been told to. But, the songs are played in alphanumeric order (Eg, ,2,3,a,b,c, so you'd need the songs like 0-track.mp3, 02-track.mp3 etc). I think all Creative Flash players work that way actually.
The Line-in on the Nano Plus isn't all that good, I wouldn't really use it tbh.
It can be used a flash dri've (as all the others can)
The Radio generally on the Nano/N200 (mine's an N200, so I'm not sure how much exactly it'd differ, but they are the same player, just rebranded) is usually very good for me. I'm in London, and with the autoscan feature, I pick up the radio stations I want to listen to. I did recently bring my player to Mauritius where I did also get a good reception (in the Capital and around the Island, not where I was staying, because that's well... on a hill, I never really did try it). I also tried it out in Australia, Perth, where I actually got nothing at all, not radio station on autoscan. If I did manually go to the radio stations I did get a muffled sound. This was only where I was staying, I didn't really have time to mess around with an mp3 player while I was out.
Hope that answers some questions, feel free to ask more.

Zen Nano Plus: How to resolve issues with installing firmware 1.14

So .... I managed to kill my Zen Nano Plus when installing firmware version .4.03, but fortunately I've managed to bring it back to life again. :-)
Here's what I did wrong, and how you can avoid the mistakes that I made ...
I attempted to install the newly released "Creative ZEN Nano Plus Firmware .4.03" from my Windows 2000 system. However, I had not previously installed the "Creative Mass Storage Driver .07.00.250". In fact there seemed to be no reason to install these mass storage drivers as the Nano Plus player was always recognized by my system. However, while installing the firmware upgrade, it seems that the player is set to recovery mode and therefore the mass storage driver needs to be installed prior to upgrading the firmware.
I realized this partway through the firmware upgrade when prompted for the "StMp3Rec.sys" driver. I then successfully installed the mass storage driver then attempted to continue with the firmware upgrade. Unfortunately, the firmware software "froze" and the process had to be killed. My Nano Plus player now wouldn't turn on and my system would not recognize it. I then read how to set the player in recovery mode, and was able to see the player listed as "STMP3500" when examining my attached USB hardware (using the "Unplug or Eject Hardware" dialog).
To install the driver, I then looked at all hardware in my "Device Manager" (right click on "My Computer", select "Properties", choose the "Hardware" tab, click on the "Device Manager" button) then selected the "STMP3500" device. Right clicking and selecting "Properties" (or double clicking) brings up the properties dialog and from there I chose the "Reinstall Driver" button. I specified the driver location: "C:\Program Files\Creative\Creative Mass Storage Drivers\StMp3Rec.sys" and the driver then successfully installed. Finally, I successfully installed the firmware upgrade and all is now working well.
Here's the bottom line:
Be sure to install the "Creative Mass Storage Driver .07.00.250" prior to upgrading to the "Creative ZEN Nano Plus Firmware .4.03".
Maybe it is because I beta tested six or seven different Rio MP3 player models (until D&M Holdings discontinued the Rio brand), or because I have worked as a software developer for eight years - but I tend not to install any software that does not appear to be required. The Creative firmware upgrade software could be greatly improved by including a simple check to see if the Creative mass storage drivers are installed before accessing the player.

This has been answered many times here. Delete a few files on the player. Create a few folders on the player. Move the songs on the player into the folders. Now add more songs to the player into the folders. There is a limit on how many items the player will allow in the root.

Bought Zen Micro to replace Zen Nano Plus - Can't get it to work

HiSorry if this was answered somewhere, but maybe i'm just dense. Can't seem to get things going. I used to have a Zen Nano Plus which worked fine on my PC - Win XP SP2.Picked up a used Zen Micro - I thought that it would be better because of bookmarking - but I have yet to get it to work.Zen Micro says Version 2.20.05?Here is a list of what it says is loaded on my PC[Creative Product-PID][Installation Log]
8 May 2006, Creative Zen Nano Plus Pack
8 May 2006, Creative MediaSource Zen Nano Plugin .00.07
8 May 2006, Zen Nano Plus Media Explorer 2.00.0
8 May 2006, Creative Audio CD Ripper .60.0
7 May 2006, Creative MediaSource Plugin for CD Burner 3.0.8
7 May 2006, Creative MediaSource Player/Organizer 3.30.2
7 May 2006, Common Audio Driver Interface .03.29
3 May 2006, MediaSource AudioSync Plugin .0.03
3 May 2006, MediaSource NOMAD Jukebox 2/3/Zen Plugin .0.03
3 May 2006, Creative Music Store Plugin .00.09
3 May 2006, Creative MediaSource Zen Nano Plugin .00.03
3 May 2006, Creative MediaSource Player Skin Pack .0.06
3 May 2006, MediaSource NOMAD MuVo Plugin .0.0
3 May 2006, MediaSource CD-ROM Burner Component 3.0.
3 May 2006, MediaSource Detector 3.00.7
3 May 2006, Common Audio Driver Interface .03.
3 May 2006, Creative MediaSource 3.20.57
3 May 2006, Audio Device Selection .0.05
3 May 2006, Creative System Information .0.3
3 May 2006, Zen Nano Plus Media Explorer .0.03
3 May 2006, Creative Audio CD Ripper .60.06
Have tried to download drivers and software for Zen Micro. When I try to run it though, it does not install because it says that I do not have device connected. Have erased everything off of Zen Micro, but have not reformatted. When I attach Zen Micro to PC, Zen Micro displays "booted" & PC displays "Zen Micro" for a second or two, then switches to "MTP Device"?. Do I need to erase everything from the Zen Nano Plus first?2. What do you think my next step should be?Thx???

Welcome to the Apple community.
If you are referring to adding a secondary account, to a single device, then you can do this at system preferences >mail, contacts & calendars.

Zen Nano Plus WON'T START / RECOVERY / RES

Hello ZNP friends and fellow victims of frustration,
I have the GB Zen Nano Plus and a Windows XP operating system. My Zen is just over 3 months old, and a few days ago I started having the "stuck on Logo or hour glass (building library) problem". Like many of you, it has frustrated me beyond belief in my attempts to correct it. I'm certainly not a computer whiz, but I'm fairly good at following clear, numbered, valid instructions. I have tried many of the offered cures for this problem as provided in the discussion forum. None have worked for me.
I have just stumbled onto/into the fix for the WON'T START / RECOVERY / RESCUE problem. At least, I hope it lasts. The bad news is that I don't know or remember the steps for the cure. The good news is that the problem can be fixed. In the frustration of trying a million variations on the steps offered in the discussion area, I happened to fix my nano plus. I was becoming like a hyper zealot playing a slot machine.
What I do remember is this:
) I did download the application ZenNanoPlus_PCFW_LF___0 and install it, and put an icon on my desktop so I could activate it easily.
2) I did double click it to call it up.
3) I attached my nano plus via USB to the computer. I don't remember if I had to do that before or after bringing up the above application. (You may have to try both.)
4) I did leave the battery out of the nano plus during this operation.
5) I was required to reformat the nano plus which eliminated anything on it. When the instruction came on to reformat, it said "... area" so I was worried that the reformat might include more than the device itself but it didn't.
6) Then I loaded a song, disconnected the device from the computer, put in a battery, and it started fine.
What a task that whole process was! Of course I'm not telling you anything new. I was tempted to just get on with life, but then I thought I should really share this with those of you who have been in the trenches...to let you know that a cure is possible.
Creative should really have a clear set of instructions by now for fixing this problem.
Good luck!
Buck

Have you updated the firmware? this could be the major cause. Also, MP3 has far fewer kinks as a uni'versal format than WMA. If possible, I highly suggest using MP3 on MP3 players.

Creative Zen Nano Plus Media Explorer only works for administra

Creative Zen Nano Plus Media Explorer only works for the administrator account; for other users the message "The Zen Nano Plus is not connected. Please connect your Zen Nano Plus to the computer." is displayed, but it *is* connected and works under other programs.
Version is .0.03.
Thanks for any assistance.
Edit: System is XPMessage Edited by zigkill on 0--2006 06:23 AM

RMskater wrote:I think you need to change the permissions to "Everyone".
How exactly do you do this? I checked this out tonight - when I logged onto my PC using my son's Limited User account (XP Home, BTW) I could connect his N200 and see it in Device Manager and Windows Explorer but both Creative pieces of software (CMS and N200 Media Explorer) did not see that it was there!
I tried setting the Run As... properties for the CTMS.exe file to run as one of the Admin user accounts but kept getting an error about being unable to find a specific file (which is in the Media Explorer folder!). When I went back to using the current user the error stopped. Perhaps I need to set the Run As.. options on that file as well?
As we don't use DRM'd music this isn't going to be a problem but it would be good to find out the cause of this once and for all.
I'm going to see if WMP0 has problems as well or if it's just the Creative ap
ps.
PB

Zen Nano Plus can't see new so

I have a GB CL Zen Nano Plus with 208 (WMA) songs in 6 folders (352 MB space used). When I add new WMA songs, they show up on Windows Explorer File Manager but won't play on the MP3 player. When the MP3 player is unconnected to the computer, I can't even see them on the player. The WMAs are not protected; we tried WMP 9 and 0 to rip the music files from CD. Heard that updating the Firmware might fix, but wanted to be sure. Any suggestions?

There are too many folders on your player - the ZNP can only see a total of 60 folders including any that don't have any music directly in them such as Artist folders. Connect your player and use Windows Explorer to rearrange your player so it uses less folders. When you say that the files aren't protected are you sure? WMP rips CDs to protected files by default so check in Tools, Settings to switch off Copy Protected. PB

Zen Nano Plus Lin In Iss

Similar Messages

Maybe you are looking for