Zen nano plus music transfer er

i started using my new nano plus gb and installed all the required the programs from the cd it came with. i used the creative media source organizer and the nano plus media explorer thing. everything worked fine for my music files with the smart fit too untill it reached about 579 mb. after 579 mb, it was stuck and wouldn't let me add any more songs. i don't know what's wrong. everything read as an error. someone please help.

thy,
There is a limit on how many files you can place in the root folder of a memory unit (player) like this, it's down to the file system. Try creating some folders and placing the songs in there instead.
Cat

Similar Messages

Bought ZEN nano plus 1GB transfer er

I am new to this and would greatly appreciate any help. I transferred files to the device and an error message comes up as if I am out of space, yet it says I have quite a bit left. Any dummy help for this newbie?

Read the FAQ post in the list at the top of the forum. This is covered in the MuVo section. Post back if you still need help afterwards.
PB

Zen Nano Plus - can't move music to it all of a sud

My daughter has had a Zen Nano Plus for about 4 months - no problems up to now. She wanted to put some new music on it, and no matter what we try, we get an error - Transfer error - an error has occurred while transferring this file. I've tried it using a variety of software as well as drag and drop. We just bought my other daughter the identical player, and I can move music to hers with no problem - so it's not the computer or the connection. Any ideas? The player works fine with the music that's on it. Any ideas, or is it RMA time? Thanks!

Hi. What sounds like the same problem has happened to me my first time using the player. It's basically behaving as if it's full, when there is over 6MB of free space left. I read a thread on Amazon (from where I bought the player) and apparently this is a common problem with the Zen nano plus, so Amazon can't/ won't replace players with this defect :-( Do any experts out there think that the response to this problem could fix my issue too? So from now on I should transfer files into folders, instead of trying to transfer 500 songs all in one go? Cheers!

Zen Nano Plus transfer prob

Am having trouble transferring .wma files to my Zen Nano Plus even though it has 590MB free. When I try to transfer anything using Creative Source I keep getting a "transfer error" message. Have tried reorganising files into folders to cut down on memory used in the root folder - but it doesn't seem to help. It's even stopped letting me transfer between folders. Has anyone else had this problem.. Anyone know what to do??

I'm having the exact same problem with my Nano Plus, and I've only had it for a little over 3 months. I contacted technical support and they told me to download the Firmware update and gave me these directions:
Zen Nano Plus Firmware Update:
http://uk.europe.creative.com/support/downloads/download2.asp?Product=2720&dlcentric=9423&Product_ Name=ZEN+Nano+Plus&OSName=Windows+XP
To install this firmware upgrade, do the following:
- Connect your player to your computer.
- Double-click the firmware upgrade file.
- When prompted to set your player in Recovery mode, disconnect your player from your computer.
- Press and hold the Play button while connecting your player to your computer's USB port.
- Continue to hold the Play button for about 0 seconds after connecting your player to your computer.
- Release the Play button when the "Find New Hardware" dialog box appears on the computer screen.
- Follow the instructions on the screen to install recovery drivers for your player.
- Double-click the firmware upgrade file and follow the instructions on the screen. Ensure to select the "Format Data Area" option within the Update.
However, at step 6 my computer did not recognize my player with it being on and neither did the Firmware. I responded to Technical Support and told them this. They said it seemed like it needed repaired or replaced! Even though there is a -year warranty, there is only a 3 month labor warranty, which means if you send it in to get fixed and it has passed the 3-month labor warranty, you have to pay a $24.95 diagnostics and handling fee. If you're in this situation, they said the best thing to do is try to exchange it wherever you bought it first. I hope this helps!

Zen Nano Plus - 300mb of the 1G is not available to store music

About 300mb of?space is?unused on my Zen Nano plus (G) and I cannot load anything onto it. Any suggestions?Is this a firmware issue??

Please read the FAQ sticky thread as this is covered there - it is a limitation of the root folder in the FAT filesystem - put your songs into a folder and you will be able to fill it. PB

Can't power on Zen Nano Plus

I have a Zen Nano Plus gb. The unit powered off so I replaced the battery as it was weak. Now it won't power up. I tested the batteries and tried different batteries. No help. The display blinks on and off at /4 second intervals. When I connect it to the USB port the display lights but without the Logo and my PC thinks it is unattached. Mine is about 0 months old. Does anyone know if it is still on warranty and what can be done? Thanks.

I just went to the page?http://us.creative.com/support/downl...ype=0&x=29&y=6and downloaded the Creative MediaSource Player/Organizer 3.30.2 file after filling all the info out in the drop down menus. I just installed it and I was good to go. The only issue I really had was installing the application from the CD which I mentioned earlier.But the application from the website installed with no problem whatsoever. I wish I could tell you something that would help as I know your frustration.Are you sure you downloaded the correct version for ME?You might ask someone if you really need this application to put music on you device because it seems like your device just acts like another dri've and you can just drag and drop into your device. I'm not sure about that so ask st so it doesn't mess up you player.or you might be able to use some other apllication to transfer your files to the player?Good luck and be persistent,JoeMessage Edited by joenanoplus on 2-26-200608:3 AM
Message Edited by joenanoplus on 2-26-200608:32 AM

Zen Nano Plus will not play all trac

My Nano Plus will not playback all tracks installed.My Firmware has been updated to .0.03I have formated the Nano Plus via Windows Explorer.
Tracks have been transferred via Windows Media Player 0 AND Creative MediaSource Organizer 3.30.2 with the same problem. The NanoPlus Mass
Storage Driver has been updated, too. I have tried it on both a desktop AND a notebook PC. The transferred tracks are combinations of WMA and MP3. Both played and unplayed tracks are a combination of
WMA-protected, WMA-nonprotected, and MP3, 28/59/60/92kbps -
nothing unique about the tracks that will not play.
The tracks have either been ripped from my audio CDs or downloaded via Media Player MSN Music store or MP3 store. I have licensed all tracks and they all play via Windows MediaPlayer and Creative MediaSource Player from my hardri've.
All tracks show up on the Zen Nano Plus in windows explorer and will play from the NanoPlus via Media Player and Creative MediaSource player, but they will not all play through the NanoPlus.
All problem tracks (if transferred via
MediaSource) will either be skipped or the NanoPlus will pause when the NanoPlus is playing or they simply are not
visible (if transferred via MediaPlayer0).
The problem tracks are not always the same tracks after I have re-transferred them (I have tired 4
times to clean/re-transfer tracks). I have 8 tracks and only 36 will play.When transferred via Windows MediaPlayer0, the tracks are organized into multiple folders.When transferred via Creative MediaSource, they are all in the root directory.
What can I do to get this to work properly?

That may be it!
My tracks have been transferred with WMP0 into the following Folder structure:
MUSIC-AUTHOR-ALBUM-Tracks.
In Explorer/MediaSource, there is One MUSIC folder containing 65 AUTHOR folders containing 74 ALBUM folders containg 85 Tracks.
My Zen Nano Plus MENU-MUSIC display shows only 3 Folders -- 3 ALBUM Folders of 36 Tracks -- the tracks that do playback.
Is this just an organizational problem?
If so, it's not very handy to Sync....there is nothing in the manual that explains this!
I'll re-organize and see.
What is the best FOLDER structure to use?

Zen Nano Plus won't play MP3, can't convert to WMA, tried new firmw

Help!
I have just reloaded the firmware (and all my music) onto my Zen Nano Plus and it didn't fix my problem.
I have mostly .wma files and they play fine. I have tried to load .mp3 files but my player just skips them. I tried using the Organizer software to convert the .mp3 files to .wma files and it says they are converted but I get about min of each song and that's it.
So I don't know why I can't play .mp3 files and I also don't know why the .mp3's can't be fully converted to .wma's.
Can anyone help?Thanks in advance,Marci

Wave files will only play by tricking the player into thinking that they are wav files created by the voice recorder. Put wav file into a folder called Recorded Tracks and see if it plays. This will at least see if it will play something. How did you transfer your files?Try ripping a CD to wma files using MediaSource or Windows Media Player - sometimes the firmware gets in a twist and will play mp3s but not wmas, or vice versa. The solution to that is to reload the firmware - go to the Support->Downloads link at the top of the page to get the latest firmware for your player. Protected songs (wma files with DRM) need to be transferred using WMP or MediaSource to transfer the license across, but mp3 files can be drag'n'dropped in Windows Explorer. A protected song without a license will give the symptoms you detail. As it's duff from the start you might just want to take it back - but it's worth trying the firmware reload first to save you some bother. PB

I have a Creative ZEN Nano Plus

Can someone tell me how or direct me to the advantage on the Line In connection. How do I plug in to and transfer music from another CD or device to put music on my Player ?TC

I'm a bit unclear on how you do direct Line In recording, as I don't have a Zen Nano Plus- my brother does. We tried it a few times, but found that it was much faster to rip the CDs on the computer and transfer from it, rather than wait for the Zen Nano Plus to copy the CD in real time.
However, the Zen Nano Plus manual gives these instructions:
Synchronizing MP3 encoding
If you are encoding songs from a CD or MiniDisc, enable Sync Track (SYNC) so that your player will encode the songs from your source as separate tracks. Your player will automatically stop when the last song is played. Sync Track is enabled by default.
In the MP3 Encoding screen, press the Scroller.
Scroll Select the Sync Track option and turn Sync Track on or off. When Sync Track is turned on, appears at the top right corner of the MP3 Encoding screen.

Problem with Creative Zen Nano Plus 1 GB mp3 player please r

I bought zen nano plus? month ago and while i was transfering music into it it crashed ,? it looked like its no more readable so i disconected it from my pc , it needed format , i did format and tried to transfer some music again but the same problem appeared . I thought the memory card of the player is damaged and needs to be changed or repaired? , i gave it to customer support and after a few days they said they installed newer software version to the player , well i thought it will fix the problem . Once i got home i tried to transfer music and it crashed again , i couldnt even format it cause when i plug in the mp3 F: ( usb dri've ) does not respond. I gave the mp3 to customer support again , they filled up the mp3 with music six times and everything worked fine. But at home it still crashes while transfering , so i dont know what to think . On the packet where the mp3 was when i bought is written WORKS WITH WINDOWS VISTA ,?currently i have windows xp ,? can it be that i can only transfer music without prloblems with windows vista ? can it be that zen nano plus is created to use with windows vista ? Thanks for reading !

Did you install the driver on your PC? If not, then do it. Try reformatting the player as FAT. Next try tranferring a few folders full of mp3 files. Use windows explorer to drag and drop the folders? with files to the player. Now see if the player will play them.

Zen Nano Plus - Dead after 20 minu

Just received my player this morning. Connected and transferred a couple of albums via windows explorer. Disconnected and had a listen, sound was ok. Reconnected to add some more music. Paste operation froze windows explorer, safely remove hardware button did nothing and the only option was a hard reset. Now player wont switch on at all, not even a logo screen and pc doesn't recognize it so cannot reflash the firmware. Most disappointing.

Thanks for the tips shellshock. I spent quite some time yesterday trying to bring the player back to life to no avail, so its now winging its way back to Amazon.
Basically it went something like:
: 8am. Grab parcel from postman and unwrap excitedly
2: Plug player into spare usb port, my 64 bit OS recognised it straight away as a 'Zen Nano Plus' so no additional driver install necessary which is just as well because there doesn't seem to be one for 64 bit versions of Windows
3: Open windows explorer and copy two folders across to player as with any UMS device (Supertramp and Erik Satie no less)
4: Unplug player, have a listen for a few minutes and farmiliarise with the menu operations and manual
5: Reconnect player to PC, which again recognizes it correctly
6: Attempt to copy and paste a further folder of mp3's to the player using windows explorer at which point onimously the hourglass mouse cursor indicates work in progress without any sign of a progress bar appearing to indicate files in transit (the player does however display a data transfer in progress animation
7: After a couple of minutes ctl-alt-del clearly indicates windows explorer (and hence the data transfer operation) have stopped responding (my pc it should be noted has a respectable spec, was built last summer is not crash prone for no reason)
8: Bollocks says I, this is not quite going to plan. Forcing the process closed via task manager and attempting to use the 'safely remove hardware' function in the system tray locks the computer up totally forcing a hard reset
9: The Nano in the meantime has stopped displaying the data transfer animation so I unplug it from the PC and power it down thinking 'oh well, hardware is known to crash occassionally, i'll need to recopy the files after a reboot no doubt'. Hah, I should be so lucky.
0: Nano now refuses to start full stop. Not even a logo. Removing and replacing batteries minutes later as recommended has no effect, holding down the power button for over a minute has no effect, different batteries have no effect
: The PC now seems to think the dead Nano is a 'STMP3500' (i'm guessing this is the chipset used by the player) and furthermore wants drivers to match. Downloading latest drivers from Creative is useless as they are only 32 bit and will not work with Windows XP 64bit, so the PC is now having none of the dead Nano
2: Attemping to activate the emergency reset by attaching the Nano to a USB port (various ports tried) whilst holding down the power button for 20 seconds or so (several times) proves futile as all my PC now wants is drivers for a goddam 'STMP3500'!
3: Latest firmware from Creative does run ok but totally fails to find the player
4: 3pm. Player is unceremoniously re-wrapped with curses into its packaging and marched to the post office for despatch to Amazon's returns department for a refund
My guess is that the failed data transfer managed to wipe or corrupt the player firmware. I'm sure all computer users are used to system crashes now and again, but they certainly wouldn't expect to have to buy new hardware each time it happened. Creative R&D department should maybe revisit the way the Nano's OS is written and protected.
After all that i'm still searching for a decent mp3 player but can find none to match the spec of the Nano at the price. Reviews of cheaper alternati'ves indicate poor battery life and questionable sound quality. Iri'ver T30 doesn't support UMS so thats a no go.
All in all a pretty negati've experience. Perhaps I was just unlucky, maybe once the refund comes through I might even give the Nano another shot, especially as the price has just dropped again by about 3 quid on Amazon......

I can't install the Zen nano Plus software on my pc. He

Hi,I've read some people have the same problem I do, but no solutuion. When I try to install the zen nano plus cd that came in the package, it comes up with a window saying : "the windows operating system running on this computer is not supported by this product". The nano plus is supposed to work with windows ME which I have?and I think I meet all the other requirements. Could they have mislabeled a cd?I tried installing it with the antivirus turned off with ca antivirus. Thanks for any help,Joe?

I just went to the page?http://us.creative.com/support/downl...ype=0&x=29&y=6and downloaded the Creative MediaSource Player/Organizer 3.30.2 file after filling all the info out in the drop down menus. I just installed it and I was good to go. The only issue I really had was installing the application from the CD which I mentioned earlier.But the application from the website installed with no problem whatsoever. I wish I could tell you something that would help as I know your frustration.Are you sure you downloaded the correct version for ME?You might ask someone if you really need this application to put music on you device because it seems like your device just acts like another dri've and you can just drag and drop into your device. I'm not sure about that so ask st so it doesn't mess up you player.or you might be able to use some other apllication to transfer your files to the player?Good luck and be persistent,JoeMessage Edited by joenanoplus on 2-26-200608:3 AM
Message Edited by joenanoplus on 2-26-200608:32 AM

Bought Zen Micro to replace Zen Nano Plus - Can't get it to work

HiSorry if this was answered somewhere, but maybe i'm just dense. Can't seem to get things going. I used to have a Zen Nano Plus which worked fine on my PC - Win XP SP2.Picked up a used Zen Micro - I thought that it would be better because of bookmarking - but I have yet to get it to work.Zen Micro says Version 2.20.05?Here is a list of what it says is loaded on my PC[Creative Product-PID][Installation Log]
8 May 2006, Creative Zen Nano Plus Pack
8 May 2006, Creative MediaSource Zen Nano Plugin .00.07
8 May 2006, Zen Nano Plus Media Explorer 2.00.0
8 May 2006, Creative Audio CD Ripper .60.0
7 May 2006, Creative MediaSource Plugin for CD Burner 3.0.8
7 May 2006, Creative MediaSource Player/Organizer 3.30.2
7 May 2006, Common Audio Driver Interface .03.29
3 May 2006, MediaSource AudioSync Plugin .0.03
3 May 2006, MediaSource NOMAD Jukebox 2/3/Zen Plugin .0.03
3 May 2006, Creative Music Store Plugin .00.09
3 May 2006, Creative MediaSource Zen Nano Plugin .00.03
3 May 2006, Creative MediaSource Player Skin Pack .0.06
3 May 2006, MediaSource NOMAD MuVo Plugin .0.0
3 May 2006, MediaSource CD-ROM Burner Component 3.0.
3 May 2006, MediaSource Detector 3.00.7
3 May 2006, Common Audio Driver Interface .03.
3 May 2006, Creative MediaSource 3.20.57
3 May 2006, Audio Device Selection .0.05
3 May 2006, Creative System Information .0.3
3 May 2006, Zen Nano Plus Media Explorer .0.03
3 May 2006, Creative Audio CD Ripper .60.06
Have tried to download drivers and software for Zen Micro. When I try to run it though, it does not install because it says that I do not have device connected. Have erased everything off of Zen Micro, but have not reformatted. When I attach Zen Micro to PC, Zen Micro displays "booted" & PC displays "Zen Micro" for a second or two, then switches to "MTP Device"?. Do I need to erase everything from the Zen Nano Plus first?2. What do you think my next step should be?Thx???

Welcome to the Apple community.
If you are referring to adding a secondary account, to a single device, then you can do this at system preferences >mail, contacts & calendars.

Creative Zen Nano Plus Media Explorer only works for administra

Creative Zen Nano Plus Media Explorer only works for the administrator account; for other users the message "The Zen Nano Plus is not connected. Please connect your Zen Nano Plus to the computer." is displayed, but it *is* connected and works under other programs.
Version is .0.03.
Thanks for any assistance.
Edit: System is XPMessage Edited by zigkill on 0--2006 06:23 AM

RMskater wrote:I think you need to change the permissions to "Everyone".
How exactly do you do this? I checked this out tonight - when I logged onto my PC using my son's Limited User account (XP Home, BTW) I could connect his N200 and see it in Device Manager and Windows Explorer but both Creative pieces of software (CMS and N200 Media Explorer) did not see that it was there!
I tried setting the Run As... properties for the CTMS.exe file to run as one of the Admin user accounts but kept getting an error about being unable to find a specific file (which is in the Media Explorer folder!). When I went back to using the current user the error stopped. Perhaps I need to set the Run As.. options on that file as well?
As we don't use DRM'd music this isn't going to be a problem but it would be good to find out the cause of this once and for all.
I'm going to see if WMP0 has problems as well or if it's just the Creative ap
ps.
PB

Zen Nano Plus can't see new so

I have a GB CL Zen Nano Plus with 208 (WMA) songs in 6 folders (352 MB space used). When I add new WMA songs, they show up on Windows Explorer File Manager but won't play on the MP3 player. When the MP3 player is unconnected to the computer, I can't even see them on the player. The WMAs are not protected; we tried WMP 9 and 0 to rip the music files from CD. Heard that updating the Firmware might fix, but wanted to be sure. Any suggestions?

There are too many folders on your player - the ZNP can only see a total of 60 folders including any that don't have any music directly in them such as Artist folders. Connect your player and use Windows Explorer to rearrange your player so it uses less folders. When you say that the files aren't protected are you sure? WMP rips CDs to protected files by default so check in Tools, Settings to switch off Copy Protected. PB

Zen nano plus music transfer er

Similar Messages

Maybe you are looking for