Zen nano Plus, say i have alot more space but i cant upload more so

I just got the Zen nano Plus and it says on the organizer I have 698.3 MB of space left and I cant upload any more songs at all, anyone have an idea of whats wrong?
thanks

See the section "I can't seem to fit any more files on my flash player yet I have free space, why?" in the FAQ post.

Similar Messages

TS2380 It's says I have error code (13014) but I cant open iTunes or get on the internet

It's says I have error code (13014) but I cant open iTunes or get on the internet

"Extended" network means your phone is picking up towers from another carrier that Sprint has an agreement with. Long story short, Sprint does not have adquate coverage in the area where you are located when you see "extended".

My ipod touch is disbled and when i try to restore it my itunes keeps saying i have to download ios5, but i cant get into my ipod to do it. What do I do?

My ipod touch is disabled. When I try to restore it my itunes says I need to download ios5, but I cant donload it because its disabled. What do I do?

Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

Zen Nano Plus bricked by Recovery Tool?

Re: Books on Cd I went ahead and attempt to install the latest firmware upgrade. At this time the upgrade seems to be progressing.
Okay. The player has successfully booted up
Success. After removing Windows Media Player , I was able to install the latest firmware upgrade. I have several follow-up questions. Most important question is #
. I wonder why the Zen Micro Media Explorer is not available to me. It is all grayed out. Any suggestions on how to get it to work
2. Is the Zen Micro Media Explorer a logical substitute to employing the Windows Media Player 0 It seems to have everything I need .
3. How am I able to create a new playlist in the device if I cannot access this application
4. When I select Playlist on the device, I see a message that says: To create a playlist select from the Now Playing context menuWhat is that all about and where do I roam to do this
Thanks very much for your help
Richard One of my new Zen Nano Plus appears to have been bricked by my use of the Recovery Tool, when it was misbehaving. This happended before with another Zen Nano Plus we had, but we fixed that over a year ago and it works fine now.
Actuallly, it's one of 6 my family has - plus we have lots of other Creative products (a Micro, Zen, Vado, X Mod etc). While its almost brand new, its was purchased on eBay in 2008.
Usually the first thing is to update the firmware, and tried the Recovery Tool hoping it had been updated - but now my Zen Nano Plus dows not turn on or get connected, and I tried to PCs and several USB cords and various USB connections.
I undertand a Zen Nano Plus does not have a Recovery Mode but did try usual method.
. Remove the battery, and press & hold the Play button will connectiong to the PC.
2. Keep pressing play for about 0 second until the New Hardware Wizard starts - that will only happen the first time.
3. Completete the New Hardware Wizard
I believe it may need to be reformatted, but is not totally bricked and can be repaired.
Is it possible to get a get a Zen Nano Plus into Recovery Mode, or connect it to a PC so I can reformated
Thanks!

take it back to the store and buy something other than a creative. My nano plus crapped out after less than 6 months. Creative will not replace it, even though the warranty is for 2 months. Worst customer service I have ever seen.

Volume level ZEN NANO PLUS, can it be chang

I have a new ZEN NANO PLUS that I have bought in Spain.
I?ve had this model before and I know that, because of the EU ruling ( **bleep** those bureaucrats! ), the volume level is not as loud as the model you can buy in the US.
A few people have suggested flashing the firmware and installing the US firmware, has anyone tried this, and did they have any success?
I downloaded the US firmware and tried to install it on my player but no luck, and the player died aswell, but I?m not sure if I did the correct thing...
If anyone knows anything about this any info would be greatly received.
Thanks in advance
Neil

You shouldn't have problem using both player together in MediaSource even in transferring audio files(non-protected content). Are you referring to being able to playback PlayForSure subscription content? I doubt it is possible(personal opinion) for the player since I believe it's more to do with the hardware rather than software.
Jason

Zen Nano Plus: How to resolve issues with installing firmware 1.14

So .... I managed to kill my Zen Nano Plus when installing firmware version .4.03, but fortunately I've managed to bring it back to life again. :-)
Here's what I did wrong, and how you can avoid the mistakes that I made ...
I attempted to install the newly released "Creative ZEN Nano Plus Firmware .4.03" from my Windows 2000 system. However, I had not previously installed the "Creative Mass Storage Driver .07.00.250". In fact there seemed to be no reason to install these mass storage drivers as the Nano Plus player was always recognized by my system. However, while installing the firmware upgrade, it seems that the player is set to recovery mode and therefore the mass storage driver needs to be installed prior to upgrading the firmware.
I realized this partway through the firmware upgrade when prompted for the "StMp3Rec.sys" driver. I then successfully installed the mass storage driver then attempted to continue with the firmware upgrade. Unfortunately, the firmware software "froze" and the process had to be killed. My Nano Plus player now wouldn't turn on and my system would not recognize it. I then read how to set the player in recovery mode, and was able to see the player listed as "STMP3500" when examining my attached USB hardware (using the "Unplug or Eject Hardware" dialog).
To install the driver, I then looked at all hardware in my "Device Manager" (right click on "My Computer", select "Properties", choose the "Hardware" tab, click on the "Device Manager" button) then selected the "STMP3500" device. Right clicking and selecting "Properties" (or double clicking) brings up the properties dialog and from there I chose the "Reinstall Driver" button. I specified the driver location: "C:\Program Files\Creative\Creative Mass Storage Drivers\StMp3Rec.sys" and the driver then successfully installed. Finally, I successfully installed the firmware upgrade and all is now working well.
Here's the bottom line:
Be sure to install the "Creative Mass Storage Driver .07.00.250" prior to upgrading to the "Creative ZEN Nano Plus Firmware .4.03".
Maybe it is because I beta tested six or seven different Rio MP3 player models (until D&M Holdings discontinued the Rio brand), or because I have worked as a software developer for eight years - but I tend not to install any software that does not appear to be required. The Creative firmware upgrade software could be greatly improved by including a simple check to see if the Creative mass storage drivers are installed before accessing the player.

This has been answered many times here. Delete a few files on the player. Create a few folders on the player. Move the songs on the player into the folders. Now add more songs to the player into the folders. There is a limit on how many items the player will allow in the root.

Zen Nano Plus softw

it's not very hard to read, that Zen Nano Plus supports Windows 98 se...but it's much harder to use all the Creative software on this platform. Actually, you can't even install Creative media Explorer etc...why is that?
One more thing, some dust got under the LCD's cover of my ZNP. Any idea how to get rid of it's

Hi,I was afraid of that.
That stinks.
This player is severely handicapped for what I need it for then. I wish I realized that before I bought it.

Creative Zen Nano Plus Media Explorer only works for administra

Creative Zen Nano Plus Media Explorer only works for the administrator account; for other users the message "The Zen Nano Plus is not connected. Please connect your Zen Nano Plus to the computer." is displayed, but it *is* connected and works under other programs.
Version is .0.03.
Thanks for any assistance.
Edit: System is XPMessage Edited by zigkill on 0--2006 06:23 AM

RMskater wrote:I think you need to change the permissions to "Everyone".
How exactly do you do this? I checked this out tonight - when I logged onto my PC using my son's Limited User account (XP Home, BTW) I could connect his N200 and see it in Device Manager and Windows Explorer but both Creative pieces of software (CMS and N200 Media Explorer) did not see that it was there!
I tried setting the Run As... properties for the CTMS.exe file to run as one of the Admin user accounts but kept getting an error about being unable to find a specific file (which is in the Media Explorer folder!). When I went back to using the current user the error stopped. Perhaps I need to set the Run As.. options on that file as well?
As we don't use DRM'd music this isn't going to be a problem but it would be good to find out the cause of this once and for all.
I'm going to see if WMP0 has problems as well or if it's just the Creative ap
ps.
PB

Zen NANO Plus doesn't switch more than 2 songs

Hi i have a problem with my new Zen nano plus mp3-player...
I can only switch 2 songs. If i switch to the thrid song the player automaticly shut down.
In the config menue i can switch as long as i want and the player doesn't shut down.
I formated the player in FAT32 and in FAT - System but it doesn't work acctually (Fastformatation).
And: If i wanna call the German Service hotline (+353 4380000) i only reach an private guy. I tipped in my telephon: 353 4380000 <-- is it right? Or are there any numbers before the "+" ?
Thx and bye (hope for many usefull postings )

Follow this link:
<a href=http://uk.europe.creative.com/support/downloads/download.asp?sOSName=Windows+XP&region=3&Product_N ame=Zen+Nano+Plus&Product_ID=2720&modelnumber=&dri verlang=033&OS=0&drivertype=0&x=33&y=5 target=_blank> Download Page for Zen Nano Plus[/url]
Under the firmware title, click the Show Details button and scroll down to the notes for the instructions.
Edit: Long link, my badMessage Edited by arcl on 2-27-2005 08:47 PM

Zen Nano Plus wont play for more than 5 seconds at a ti

I recently bought a new Creative Zen Nano Plus and thought I was getting a good reliable product. It synced in WMP like it should but when I unplugged it from my computer and tried to listen to the songs it will boot up and start playing a song but then shut off 3 seconds later. I formatted it and updated the firmware and drivers on the player and my computer but it still wont play for more than a few seconds at a time. I tried changing the battery and leaving it plugged in but neither of the above worked. I would appreciate some help. Thanks.

Same issue with me - only mine won't even power on now...
I am waiting on reply from customer support...

I have a Creative ZEN Nano Plus

Can someone tell me how or direct me to the advantage on the Line In connection. How do I plug in to and transfer music from another CD or device to put music on my Player ?TC

I'm a bit unclear on how you do direct Line In recording, as I don't have a Zen Nano Plus- my brother does. We tried it a few times, but found that it was much faster to rip the CDs on the computer and transfer from it, rather than wait for the Zen Nano Plus to copy the CD in real time.
However, the Zen Nano Plus manual gives these instructions:
Synchronizing MP3 encoding
If you are encoding songs from a CD or MiniDisc, enable Sync Track (SYNC) so that your player will encode the songs from your source as separate tracks. Your player will automatically stop when the last song is played. Sync Track is enabled by default.
In the MP3 Encoding screen, press the Scroller.
Scroll Select the Sync Track option and turn Sync Track on or off. When Sync Track is turned on, appears at the top right corner of the MP3 Encoding screen.

I messed up install of Zen Nano Plus 1

Windows XP Home SP2
Windows Media Player 0 (will use with Zen Nano Plus)
Dell 8250
?xml:namespace prefix = o ns = "urn:schemas-microsoft-comfficeffice" />
During the CD install, I had some questions and interruptions that required me to cancel, exit and say ?yes? to I did not want to install at this time, but it installed some files. I did not connect the player to my computer because of the manual?s warning to not connect player to computer before setting up the software.
A search for Creative and Creative Zen brought up the following files on my computer:
C:\Program Files\Creative\Product Registration\English
C?\Program Files\Creative\Shared Files\CTregSvr and PdtIdMgr.pid
C:\Program Files\RealPlayer\Devices had 7 Creative and Creative Zen files
I have an Iomega Zip USB mass storage device on my system which is always powered up. It is used as I go along as a 2nd backup.
Some other threads here recommend not using the install CD and not installing the software, but suggest connecting player and letting Windows XP recognize and install drivers. This is what I did with my Zip dri've. I dislike putting software I don?t need on my computer. I will be using the Nano Plus just for music, and maybe on occasion the AM/FM.
So?..here are my questions:
. Install with CD or connect to computer and let Windows do its thing?
2. Will the Zip dri've cause a problem and should I power it down and disconnect from the computer when installing and using the Nano Plus?
3. Are there more files lurking about in the Registry and where? (I am O.K. working in the Registry) ? I would like to make everything clean and start fresh with a clean install, unless this is not recommended.
4. If I do need to use install CD is a full or custom recommended?
I will appreciate any assistance and information offered.
My thanks.
Miki

I thought I would let y'all know my Nano Plus is installed and my USB Iomega Zip still permanently resides undisturbed in my F:\ dri've and when I connect the Nano Plus, it is recognized by G:\ as it should be.
I called Creative support and so I dd not have to use the install CD, the tech E-mailed me the drivers. When I began the install, I was asked to uninstall any mass storage devices before I installed, which I did......actually I just unplugged the Zip dri've so Windows would not know it existed. The tech said it was better to install their drivers than not; otherwise with WMP I would only be able to drag and drop.
So.......that's my story
Miki

Zen Nano PLus song list probl

I had transferred about 00 songs into my zen nano plus but when I played it, I realised that I had lost alot of songs. Check the system info and it states that I have only 34 songs in the player. When i check back on my pc, it indicates that i have 00 songs in my player.
I owned the gb version and have only transferred less than half of its capacity.
I have the updated firmware and driver installed and my songs are all mp3 format. Therefore there shouldn't be a reason the player can't play my songs.
Thanks,
NinaMessage Edited by arnina on 06-04-2006 09:40 AM

So after I posted my initial qns, I went through the forums and found out that flash based players couldn't handle too many folders. I had transferred my songs using wmp sync and by doing so, the player created folders for each individual artist and broke down further into albums. This would have been great for hdd players but not for flash based ones.
What I did was to just transfer the songs individually using the explorer. It's a tad hassling but it doesn't create all those folders.
Hope that this help for any other new users of zen nano plus or flash based player. Feel a bit idiotic answering my own question though.
Jaded_Whisper if you have any more questions, you could pm me. I could try to help you with all my newbie expertise. LoL
Cheers,
Nina

Zen Nano Plus - Dead after 20 minu

Just received my player this morning. Connected and transferred a couple of albums via windows explorer. Disconnected and had a listen, sound was ok. Reconnected to add some more music. Paste operation froze windows explorer, safely remove hardware button did nothing and the only option was a hard reset. Now player wont switch on at all, not even a logo screen and pc doesn't recognize it so cannot reflash the firmware. Most disappointing.

Thanks for the tips shellshock. I spent quite some time yesterday trying to bring the player back to life to no avail, so its now winging its way back to Amazon.
Basically it went something like:
: 8am. Grab parcel from postman and unwrap excitedly
2: Plug player into spare usb port, my 64 bit OS recognised it straight away as a 'Zen Nano Plus' so no additional driver install necessary which is just as well because there doesn't seem to be one for 64 bit versions of Windows
3: Open windows explorer and copy two folders across to player as with any UMS device (Supertramp and Erik Satie no less)
4: Unplug player, have a listen for a few minutes and farmiliarise with the menu operations and manual
5: Reconnect player to PC, which again recognizes it correctly
6: Attempt to copy and paste a further folder of mp3's to the player using windows explorer at which point onimously the hourglass mouse cursor indicates work in progress without any sign of a progress bar appearing to indicate files in transit (the player does however display a data transfer in progress animation
7: After a couple of minutes ctl-alt-del clearly indicates windows explorer (and hence the data transfer operation) have stopped responding (my pc it should be noted has a respectable spec, was built last summer is not crash prone for no reason)
8: Bollocks says I, this is not quite going to plan. Forcing the process closed via task manager and attempting to use the 'safely remove hardware' function in the system tray locks the computer up totally forcing a hard reset
9: The Nano in the meantime has stopped displaying the data transfer animation so I unplug it from the PC and power it down thinking 'oh well, hardware is known to crash occassionally, i'll need to recopy the files after a reboot no doubt'. Hah, I should be so lucky.
0: Nano now refuses to start full stop. Not even a logo. Removing and replacing batteries minutes later as recommended has no effect, holding down the power button for over a minute has no effect, different batteries have no effect
: The PC now seems to think the dead Nano is a 'STMP3500' (i'm guessing this is the chipset used by the player) and furthermore wants drivers to match. Downloading latest drivers from Creative is useless as they are only 32 bit and will not work with Windows XP 64bit, so the PC is now having none of the dead Nano
2: Attemping to activate the emergency reset by attaching the Nano to a USB port (various ports tried) whilst holding down the power button for 20 seconds or so (several times) proves futile as all my PC now wants is drivers for a goddam 'STMP3500'!
3: Latest firmware from Creative does run ok but totally fails to find the player
4: 3pm. Player is unceremoniously re-wrapped with curses into its packaging and marched to the post office for despatch to Amazon's returns department for a refund
My guess is that the failed data transfer managed to wipe or corrupt the player firmware. I'm sure all computer users are used to system crashes now and again, but they certainly wouldn't expect to have to buy new hardware each time it happened. Creative R&D department should maybe revisit the way the Nano's OS is written and protected.
After all that i'm still searching for a decent mp3 player but can find none to match the spec of the Nano at the price. Reviews of cheaper alternati'ves indicate poor battery life and questionable sound quality. Iri'ver T30 doesn't support UMS so thats a no go.
All in all a pretty negati've experience. Perhaps I was just unlucky, maybe once the refund comes through I might even give the Nano another shot, especially as the price has just dropped again by about 3 quid on Amazon......

Zen Nano Plus showing Probl

I am using Zen Nano plus. Somedays back I found it is not showing any of the mp3 files in it addtioanally some picture files also not able see.
But when I try to see the memory consumed it is showing as if those files are still there. I can't play any music as it is saying a error no music file found. But memory is consumed by those file.
Then I tried to re-install the firmware to get rid of all this issue, but I found the following error.
"Sorry, no Creative updates are available for ZenNanoPlus_PCFW_LF__2_03.exe."
1.Can anyone tell me the link where I can find latest
Firmware for Zen Nano plus.
2. And how to get rid of above problem?
Please let me know if you need more information regarding the problem.
Thanks in advance

The firmware ZenNanoPlus_PCFW_LF__2_03.exe isn't available at the download site anymore as it's being replaced with a newer version.
You should go to the download page and choose the player you have from the category list and get the firmware there.
What's the website URL that you have mention there's no Zen Nano Plus listing in the category?
Jason

Zen nano Plus, say i have alot more space but i cant upload more so

Similar Messages

Maybe you are looking for