Zen Nano PLus song list probl

I had transferred about 00 songs into my zen nano plus but when I played it, I realised that I had lost alot of songs. Check the system info and it states that I have only 34 songs in the player. When i check back on my pc, it indicates that i have 00 songs in my player.
I owned the gb version and have only transferred less than half of its capacity.
I have the updated firmware and driver installed and my songs are all mp3 format. Therefore there shouldn't be a reason the player can't play my songs.
Thanks,
NinaMessage Edited by arnina on 06-04-2006 09:40 AM

So after I posted my initial qns, I went through the forums and found out that flash based players couldn't handle too many folders. I had transferred my songs using wmp sync and by doing so, the player created folders for each individual artist and broke down further into albums. This would have been great for hdd players but not for flash based ones.
What I did was to just transfer the songs individually using the explorer. It's a tad hassling but it doesn't create all those folders.
Hope that this help for any other new users of zen nano plus or flash based player. Feel a bit idiotic answering my own question though.
Jaded_Whisper if you have any more questions, you could pm me. I could try to help you with all my newbie expertise. LoL
Cheers,
Nina

Similar Messages

Zen NANO Plus doesn't switch more than 2 songs

Hi i have a problem with my new Zen nano plus mp3-player...
I can only switch 2 songs. If i switch to the thrid song the player automaticly shut down.
In the config menue i can switch as long as i want and the player doesn't shut down.
I formated the player in FAT32 and in FAT - System but it doesn't work acctually (Fastformatation).
And: If i wanna call the German Service hotline (+353 4380000) i only reach an private guy. I tipped in my telephon: 353 4380000 <-- is it right? Or are there any numbers before the "+" ?
Thx and bye (hope for many usefull postings )

Follow this link:
<a href=http://uk.europe.creative.com/support/downloads/download.asp?sOSName=Windows+XP&region=3&Product_N ame=Zen+Nano+Plus&Product_ID=2720&modelnumber=&dri verlang=033&OS=0&drivertype=0&x=33&y=5 target=_blank> Download Page for Zen Nano Plus[/url]
Under the firmware title, click the Show Details button and scroll down to the notes for the instructions.
Edit: Long link, my badMessage Edited by arcl on 2-27-2005 08:47 PM

Zen Nano Plus showing Probl

I am using Zen Nano plus. Somedays back I found it is not showing any of the mp3 files in it addtioanally some picture files also not able see.
But when I try to see the memory consumed it is showing as if those files are still there. I can't play any music as it is saying a error no music file found. But memory is consumed by those file.
Then I tried to re-install the firmware to get rid of all this issue, but I found the following error.
"Sorry, no Creative updates are available for ZenNanoPlus_PCFW_LF__2_03.exe."
1.Can anyone tell me the link where I can find latest
Firmware for Zen Nano plus.
2. And how to get rid of above problem?
Please let me know if you need more information regarding the problem.
Thanks in advance

The firmware ZenNanoPlus_PCFW_LF__2_03.exe isn't available at the download site anymore as it's being replaced with a newer version.
You should go to the download page and choose the player you have from the category list and get the firmware there.
What's the website URL that you have mention there's no Zen Nano Plus listing in the category?
Jason

Zen Nano Plus Connection Probl

(2)Zen Nano Pluses. Both using firmware .0.03. One Red, one Black (Click and Clack always want to know what color car they are diagnosing...)
(2) Computers, both XP SP2 with all updates; one called Dad's, one called W's.
One Zen (for ID, the red one) has been used on Dad's computer without issues for about 3 weeks.
One Zen, new and color Black, works on Dad's computer, but not on W's computer. W's computer will not properly recognize either the new Nano (the black one) or mine (the Red one), in either Creative MEdia SOurce, or Zen Explorer, or Windows explorer.
First, I have read the FAQ's. I have uninstalled and reinstalled the Nano software. When I use PB's check odd things appear:
PB's check:
With your player connected and View, Devices by Connection selected in Device Manager navigate through as follows:
Advanced Config and Power Interface (ACPI) PC
->Microsoft ACPI-Compliant System
-->PCI Bus
You should then see a series of USB Host Controllers that you will have to click through in turn to find the one your player is connected to.
Underneath each controller should be a USB Hub, and then devices are listed beneath the hubs.
For my N200 I have USB Mass Storage Device, Creative MuVo N200 USB Device then Generic Volume.
Your entry should be similar but with Zen Nano Plus instead of N200.
While you're there, right-click on the entry for the hub attached to your player and select Properties. On the Power tab it will show how much current the port can supply and in the Attached Devices list it will show how much power the player needs. In my case the hub supplies 500mA and the player needs 00mA.
PB
What appears on Dad's computer, with either Nano, is USB Enhanced Host Controler, USB Root Hub, Generic USB Hub, USB Mass Storage Device, Creative Zen Nano Plus USB Device, Generic Volume. Again, either Nano works on Dad's computer.
On W's computer, after just having reinstalled the new mass driver, it is USB2 Enhanced Host Controller, USB Root Hub, USB Mass Storage Device, Disk Dri've. On restart from that, it reads Creative Nano Plus USB Device, with no "volume" underneath it, and the oddball icon is not there. I think the oddball icon is associated with the "Disk Dri've". Once it read under Creative ZEn Nano Plus, "Unknown Device". Also, when I attach a Nano to W's computer, it first seems to see the Nano in the New Device Found message, THEN while it is still attached, it says in another New DEvice Found mesage that it has found a Disk Dri've. It also shows some oddball icon I can't decipher, right next to the "safely remove Hardware" icon. The oddball icon does not appear on Dad's computer.
Any ideas?
Thanks.Message Edited by Bennyd on 0-0-2006 06:6 AM

NEWS!!!
Actually, we have 3 Zen Nano Pluses. Two (the black and the red) have .0.03 firmware. I have never connected the black or the red to W's computer and have it connect properly. In fact, I had just tried (again) to connect the black, it failed, I re-booted. Then, I connected the blue, with the old firmware, and it CONNECTED. I could see it in WIndows explorer as dri've F:, which never happened with either the red or the black with .0.03 firmware.
So, now what?

Zen Nano Plus - Connection Problems and Firmware Upgrade probl

Like many others posting on this forum, for a while I had problems trying to get my GB Zen Nano Plus to be recognized by the .0.03 Firmware Update software.
I eventually got it by doing this:
While the Firmware Update software was "Searching" for a device, I kept on unplugging and plugging in the Zen Nano Plus from the USB cable while holding down the Play button, unti it "caught". I tried this since I noticed it would initially see the unit saying "A device has been detected in recovery mode...", but then throw the unit into "non-recovery" mode and hence force the Firmware Update software to keep on searching.
Anyhoo, after it did finally "catch" it (after about 0 times unplugging/plugging while holding the Play button down), it showed my firmware as .03.02, and so I did the upgrade to .0.03. The upgrade said "Complete". I then take the unit off of USB, and put my battery back in. and. uhm. well. Now it won't turn on at all. *sigh*
So there I go again in the "unplug-plug" loop on trying to get the older .03.02. Finally caught after about 30 times (yes my hands are tired). And after downgrading to .03.02, putting the battery back in, the unit turns on fine.. WHEW.
So, beware to everyone. Not sure if I'd trust the .0.03 Firmware. Doesnt seem to work on my Zen Nano Plus, and I JUST bought the thing from Circuit City about a week ago.
And for those of you having problems getting the Firmware Upgrade to work.. try my (tiring) method.
I tried this on my Dell D600 laptop (actually used the USB ports on the docking station).
-taka

lcvdw wrote:Can you tell me what I am supposed to see if it is connected properly?
With your player connected and View, Devices by Connection selected in Device Manager navigate through as follows:
Advanced Config and Power Interface (ACPI) PC
->Microsoft ACPI-Compliant System
-->PCI Bus
You should then see a series of USB Host Controllers that you will have to click through in turn to find the one your player is connected to.
Underneath each controller should be a USB Hub, and then devices are listed beneath the hubs.
For my N200 I have USB Mass Storage Device, Creative MuVo N200 USB Device then Generic Volume.
Your entry should be similar but with Zen Nano Plus instead of N200.
While you're there, right-click on the entry for the hub attached to your player and select Properties. On the Power tab it will show how much current the port can supply and in the Attached Devices list it will show how much power the player needs. In my case the hub supplies 500mA and the player needs 00mA.
PB
Message Edited by PeeBee on 2-30-2005 02:05 PM

Zen Nano Plus: I can't get my CDs to play in original order...He

Hello. I'm new here.
I got a Zen Nano Plus 52 mb a few months ago. Installed the software on my computer. I'm not very computer literate.
Here's what's frustrating me: I can't seem to listen to my CDs in their original order.
) I put a CD in my computer
2) Whether I view the track list in Windows Media Player or in the Creative Media Menu the track list appears in its original order as seen on the CD.
3) I "rip" the CD to my Nano player.
4) When I disconnect the player and go to play the album the tracks are all mixed up and not in the original order anymore.
I've tried some different things but nothing seems to correct the problem. I'm hoping someone can direct me what to do. I'm very confused, as I don't understand much of the computer terminology I read.

As in other response, the Nano Plus does not read ID tag info for sorting (it does read part of the tag--song name---only for display while that song is playing). Tag info typically includes the track number. Windows Media Player plays tracks in order of track number contained in the ID3 tags. The Nano Plus only sorts by filename. You can rip your tracks in a format that is prefixed by the track number (for filename). This can be done in Windows Media Player and other programs. Somehow you ripped tracks without the track number first (which would solve your problem). You tracks should look like "0-Come Together-Bealtes.wma" or something like this. This is the FILENAME, as you would see in Windows Explorer. The track info is not visible in Windows Explorer views. You can see it from Windows Media Player or Creative Media Source Organizer, though. Other players like Zen Micro and Touch sort tracks and build the library database on ID3 Tag info, not filenames.

Creative Zen Nano Plus Firmware Upgrade 1.03

Hi everyone,
Just wanted to make you aware of an update that has just been posted on our site.
<TABLE cellSpacing=0 cellPadding=0 width=540 bgColor=#eeeeee border=0>
<TBODY>
<TR vAlign=top>
<TD height=5><FONT color=blue> (<FONT color=#222222 size=><B>.6 MB</B>) </TD>
<TD><FONT color=#222222 size=>2 Sep 05 </TD></TR></TBODY></TABLE>
<TABLE id=Table5 borderColor=#cccccc cellSpacing=0 cellPadding=3 width=540 border=>
<TBODY>
<TR>
<TD colSpan=2><B>Filename: </B><B>ZenNanoPlus_PCFW_LF__03_02.exe</B></TD></TR>
<TR>
<TD colSpan=2> ZENP-FWARE-2-LF
<DIV id=ShortDesc>
This upgrade improves the functionality of your Creative Zen? Nano Plus player. For complete functionality, make sure that you meet the requirements listed below before installing this upgrade.
<DIV id=Features>
<EM>Enhancement:</EM>
Supports Thai unicode character display.
</LI>
<DIV id=Fixes>
<EM>Fix</EM>:
Ensures proper functionality of WMA playback when you move forward or backward within a track.
Improves Shuffle mode randomization when you play back a large number of MP3 tracks.</LI>
<DIV id=Notes>
<EM>Requirements:</EM>
Microsoft Windows XP, Windows 2000, Windows Millennium Edition or Windows 98 Second Edition (SE)
Available USB port (version . or higher)
Creative Zen Nano Plus player
For Windows 98 SE only: Creative Mass Storage drivers .05.0.250 or later, available from the Installation CD or the Internet</LI>
<EM>Notes:</EM>
This firmware upgrade only works with Creative Zen Nano Plus players. Do not install this upgrade for other players.
You will lose all content in your player when you install the firmware. Back up any audio or data files in your player to your computer before upgrading the firmware.
To install this firmware upgrade, do the following:
Download the ZenNanoPlus_PCFW_LF__03_02.exe file into your local hard disk.
Connect your player to your computer.
Double-click the firmware upgrade file.
When prompted to set your player in Recovery mode, disconnect your player from your computer.
Press and hold the Play button while connecting your player to your computer's USB port.
Continue to hold the Play button for about 0 seconds after connecting your player to your computer.
Release the Play button when the Find New Hardware dialog box appears on the computer screen.
Follow the instructions on the screen to install recovery drivers for your player.
Double-click the firmware upgrade file and follow the instructions on the screen.</LI>
</LI>
</TD></TR></TBODY></TABLE>

I went ahead and updated it anyway. One little thing I noticed was now the volume only goes up to 25 like my Zen Touch instead of 40 or whatever that it did before. Same loudness, different numbers only. Other than that, I have not noticed anything different, but it seemed to work OK scrolling through a song with the old firmware. I did not, obviously, do a detailed comparison.

Zen Nano Plus: How to resolve issues with installing firmware 1.14

So .... I managed to kill my Zen Nano Plus when installing firmware version .4.03, but fortunately I've managed to bring it back to life again. :-)
Here's what I did wrong, and how you can avoid the mistakes that I made ...
I attempted to install the newly released "Creative ZEN Nano Plus Firmware .4.03" from my Windows 2000 system. However, I had not previously installed the "Creative Mass Storage Driver .07.00.250". In fact there seemed to be no reason to install these mass storage drivers as the Nano Plus player was always recognized by my system. However, while installing the firmware upgrade, it seems that the player is set to recovery mode and therefore the mass storage driver needs to be installed prior to upgrading the firmware.
I realized this partway through the firmware upgrade when prompted for the "StMp3Rec.sys" driver. I then successfully installed the mass storage driver then attempted to continue with the firmware upgrade. Unfortunately, the firmware software "froze" and the process had to be killed. My Nano Plus player now wouldn't turn on and my system would not recognize it. I then read how to set the player in recovery mode, and was able to see the player listed as "STMP3500" when examining my attached USB hardware (using the "Unplug or Eject Hardware" dialog).
To install the driver, I then looked at all hardware in my "Device Manager" (right click on "My Computer", select "Properties", choose the "Hardware" tab, click on the "Device Manager" button) then selected the "STMP3500" device. Right clicking and selecting "Properties" (or double clicking) brings up the properties dialog and from there I chose the "Reinstall Driver" button. I specified the driver location: "C:\Program Files\Creative\Creative Mass Storage Drivers\StMp3Rec.sys" and the driver then successfully installed. Finally, I successfully installed the firmware upgrade and all is now working well.
Here's the bottom line:
Be sure to install the "Creative Mass Storage Driver .07.00.250" prior to upgrading to the "Creative ZEN Nano Plus Firmware .4.03".
Maybe it is because I beta tested six or seven different Rio MP3 player models (until D&M Holdings discontinued the Rio brand), or because I have worked as a software developer for eight years - but I tend not to install any software that does not appear to be required. The Creative firmware upgrade software could be greatly improved by including a simple check to see if the Creative mass storage drivers are installed before accessing the player.

This has been answered many times here. Delete a few files on the player. Create a few folders on the player. Move the songs on the player into the folders. Now add more songs to the player into the folders. There is a limit on how many items the player will allow in the root.

Bought Zen Micro to replace Zen Nano Plus - Can't get it to work

HiSorry if this was answered somewhere, but maybe i'm just dense. Can't seem to get things going. I used to have a Zen Nano Plus which worked fine on my PC - Win XP SP2.Picked up a used Zen Micro - I thought that it would be better because of bookmarking - but I have yet to get it to work.Zen Micro says Version 2.20.05?Here is a list of what it says is loaded on my PC[Creative Product-PID][Installation Log]
8 May 2006, Creative Zen Nano Plus Pack
8 May 2006, Creative MediaSource Zen Nano Plugin .00.07
8 May 2006, Zen Nano Plus Media Explorer 2.00.0
8 May 2006, Creative Audio CD Ripper .60.0
7 May 2006, Creative MediaSource Plugin for CD Burner 3.0.8
7 May 2006, Creative MediaSource Player/Organizer 3.30.2
7 May 2006, Common Audio Driver Interface .03.29
3 May 2006, MediaSource AudioSync Plugin .0.03
3 May 2006, MediaSource NOMAD Jukebox 2/3/Zen Plugin .0.03
3 May 2006, Creative Music Store Plugin .00.09
3 May 2006, Creative MediaSource Zen Nano Plugin .00.03
3 May 2006, Creative MediaSource Player Skin Pack .0.06
3 May 2006, MediaSource NOMAD MuVo Plugin .0.0
3 May 2006, MediaSource CD-ROM Burner Component 3.0.
3 May 2006, MediaSource Detector 3.00.7
3 May 2006, Common Audio Driver Interface .03.
3 May 2006, Creative MediaSource 3.20.57
3 May 2006, Audio Device Selection .0.05
3 May 2006, Creative System Information .0.3
3 May 2006, Zen Nano Plus Media Explorer .0.03
3 May 2006, Creative Audio CD Ripper .60.06
Have tried to download drivers and software for Zen Micro. When I try to run it though, it does not install because it says that I do not have device connected. Have erased everything off of Zen Micro, but have not reformatted. When I attach Zen Micro to PC, Zen Micro displays "booted" & PC displays "Zen Micro" for a second or two, then switches to "MTP Device"?. Do I need to erase everything from the Zen Nano Plus first?2. What do you think my next step should be?Thx???

Welcome to the Apple community.
If you are referring to adding a secondary account, to a single device, then you can do this at system preferences >mail, contacts & calendars.

Zen Nano Plus WON'T START / RECOVERY / RES

Hello ZNP friends and fellow victims of frustration,
I have the GB Zen Nano Plus and a Windows XP operating system. My Zen is just over 3 months old, and a few days ago I started having the "stuck on Logo or hour glass (building library) problem". Like many of you, it has frustrated me beyond belief in my attempts to correct it. I'm certainly not a computer whiz, but I'm fairly good at following clear, numbered, valid instructions. I have tried many of the offered cures for this problem as provided in the discussion forum. None have worked for me.
I have just stumbled onto/into the fix for the WON'T START / RECOVERY / RESCUE problem. At least, I hope it lasts. The bad news is that I don't know or remember the steps for the cure. The good news is that the problem can be fixed. In the frustration of trying a million variations on the steps offered in the discussion area, I happened to fix my nano plus. I was becoming like a hyper zealot playing a slot machine.
What I do remember is this:
) I did download the application ZenNanoPlus_PCFW_LF___0 and install it, and put an icon on my desktop so I could activate it easily.
2) I did double click it to call it up.
3) I attached my nano plus via USB to the computer. I don't remember if I had to do that before or after bringing up the above application. (You may have to try both.)
4) I did leave the battery out of the nano plus during this operation.
5) I was required to reformat the nano plus which eliminated anything on it. When the instruction came on to reformat, it said "... area" so I was worried that the reformat might include more than the device itself but it didn't.
6) Then I loaded a song, disconnected the device from the computer, put in a battery, and it started fine.
What a task that whole process was! Of course I'm not telling you anything new. I was tempted to just get on with life, but then I thought I should really share this with those of you who have been in the trenches...to let you know that a cure is possible.
Creative should really have a clear set of instructions by now for fixing this problem.
Good luck!
Buck

Have you updated the firmware? this could be the major cause. Also, MP3 has far fewer kinks as a uni'versal format than WMA. If possible, I highly suggest using MP3 on MP3 players.

Error Message when Trying to Rip to Zen Nano Plus

I use Zen Nano Plus Media Explorer and I get this message:
"Unable to lead database component. The program will now exit."
I can't figure out what is missing in order to correct the problem. Can anyone help me?
I use Windows XP Home on my HP Laptop.

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting.

Zen Nano Plus can't see new so

I have a GB CL Zen Nano Plus with 208 (WMA) songs in 6 folders (352 MB space used). When I add new WMA songs, they show up on Windows Explorer File Manager but won't play on the MP3 player. When the MP3 player is unconnected to the computer, I can't even see them on the player. The WMAs are not protected; we tried WMP 9 and 0 to rip the music files from CD. Heard that updating the Firmware might fix, but wanted to be sure. Any suggestions?

There are too many folders on your player - the ZNP can only see a total of 60 folders including any that don't have any music directly in them such as Artist folders. Connect your player and use Windows Explorer to rearrange your player so it uses less folders. When you say that the files aren't protected are you sure? WMP rips CDs to protected files by default so check in Tools, Settings to switch off Copy Protected. PB

Zen Nano Plus - can't move music to it all of a sud

My daughter has had a Zen Nano Plus for about 4 months - no problems up to now. She wanted to put some new music on it, and no matter what we try, we get an error - Transfer error - an error has occurred while transferring this file. I've tried it using a variety of software as well as drag and drop. We just bought my other daughter the identical player, and I can move music to hers with no problem - so it's not the computer or the connection. Any ideas? The player works fine with the music that's on it. Any ideas, or is it RMA time? Thanks!

Hi. What sounds like the same problem has happened to me my first time using the player. It's basically behaving as if it's full, when there is over 6MB of free space left. I read a thread on Amazon (from where I bought the player) and apparently this is a common problem with the Zen nano plus, so Amazon can't/ won't replace players with this defect :-( Do any experts out there think that the response to this problem could fix my issue too? So from now on I should transfer files into folders, instead of trying to transfer 500 songs all in one go? Cheers!

Creative zen nano plus

I´ve bought a creative zen nano plus and couldn´t make it work on my Mac. Does anyone knows if there is any restrictions for creative mp3 players to install on Macs? There´s anything I can do?
Thanks

Welcome To  Discussions marianamansur!
As per this page ZEN Nano Plus - 1GB MP3 flash player stores 500 songs and comes available in 10 colors, these are the software requirements.
"Microsoft® Windows® 98SE®/2000/Me/XP (Service Pack 1 or higher)"
ali b

ZEN NANO PLUS PLAYING QUEST

I just bought the GB Zen Nano Plus and I love it. But today something weird happened, it was playing through my songs as normal the at the end of a certain song when it went to the next track, this next track did not automatically start playing as it should, i saw the solid square icon meaning stop on the player, and to play the track i had to repress the play button then it played through fine, so i erased the track before the track that would not play thinking i would just reload it when i got home, but that didn't fix the problem so i also erased the actual track that would not play until i repressed the play button, finally after erasing a few more tracks in the sequence, it stopped happening, it was weird because everyother track just plays through one after another like it should, my play mode is on normal, each album that i have tracks from on my player is in a separate folder. i am going to reload the problem songs and see what happens, just thought it was weird
any thoughts?
thank you

My N200 plays all the way through until the end of the last folder. You must have a different Play Mode set.
PB

Zen Nano PLus song list probl

Similar Messages

Maybe you are looking for