Zen Neeon 2 does not have power at all

Well it's so simple as in the top of a pin, it took long to discover but it is easy as drinking water. If you have your player with this problem just simply reset it by using the reset?hole in the player with a pin, and it will just turn on and be ready for playing again.

Thank you buddy, it does well. God Bless! ---Loupel

Similar Messages

Version 11.0.04 does not have a "BUY ALL" selection when I go to purchase item from MY WISHLIST

Version 11.0.4 does not have a "BUY ALL" selection when I go to purchase item from MY WISHLIST. I have to purchase each song individually......A bit tedious don't ya think?

Other people have commented about the same thing - you can try leaving feedback for Apple and maybe it'll be brought back in a future update : http://www.apple.com/feedback/itunesapp.html

My iphone 4 does not have facetime at all

my iphone 4 does not have facetime at all

Where was the iPhone purchased?
If the iPhone was designated by Apple to be sold in a middle eastern country that restricts FaceTime, the iPhone won't include FaceTime.

Zen Stone Plus: does not charge/power on / isn´t reconized by my

Hi!?Bought a few days ago a zen stone plus but haven't tested it. Aboiut 2 weeks later I opened the boix and noticed the player does not charge, or power on and is not recognized by my pc as well...
What should I do? The shop where I bought it is about 600 km away from my home...
Regards?

Try it on another PC if you can to be sure the player is having a problem, if it does the same there then I would advise contacting Customer Support so they can assist you.
Cat

TS3297 my itunes wish list does not have a purchase allbutton why not it did before

My itunes wish list does not have a purchase all button anymore why not?

You don't think we've all done that?.............numerous times!
Ever since this change came out I sent feedback the very next day and several times since.
We've had iTunes updates since and Apple just doesn't seem to think it's a big deal.
Why would they get rid of it to begin with?
I don't purchase a can of beans, one bean at a time.

Itunes Store Does Not Have The Band "Headstones" Discography

I searched them like 5 different names whether it be song or artsist and there's no trace of them, except that there lead singer Hugh Dillon's solo stuff is on there and it says listeners alo bought and a name on their is "headstones" but when i click on it.
it brings me to the rolling headstones or the gettin' headstones.
my buddy searched them up and said the were on their but i can't find them. am i doing something wrong or what?

The iTunes Store does not have 100% of all music that exists, so it is possible they simply don't sell it. (FYI the iTunes USA Store does not have them.) Ask your friend where he saw them and maybe that will help track it down. You can also check other online music download retailers.
If that does not help, the used Headstones CDs are readily available, which you can buy and rip into your iTunes library.

I have an older Power Mac and it does not have the ability/hardware to connect to my wireless network.It is on 2nd floor which has no ethernet connections available. How can I get connected wirelessly?

I have an older Power Mac desktop computer. I do not believe it has the hardware to connect wirelessly to my wireless network. The computer is located on the 2nd floor of my house where there are no ethernet network connections so I would have to use wireless to connect to the internet. I have a wireless LinkSys router downstairs that I use to create my wireless network. I also have a Time Capsule upstairs but without the ability to plug an ethernet network cable into it, I cannot use it to get internet access t the computer.
What hardware can I add to give me the abiity to connect the Power Mac to my wireless network?
Is there a way perhaps to link routers? IE. Can I somehow have my existing wireless router downstairs connect wirelessly with the Time Capsule upstairs that i could then plug the Power Mac into for connectivity?
Not sure what version of OS this computer is currently using but do know it does not have the newer dual Intel processors. As such I am unable to update to newer OS versions.

While uselessSABOTAGE's advice is great, in case of future issues, it would helps us in the future if you would post accurate tech specs of your model iMac.
You info states you have an older IMac PowerMac, but is also says your OS X version is OS X 10.7.2.
This is not possible. OS X 10.7.2 Lion only runs on Intel CPU Macs.
Please, go up to the Apple symbol in the upper top left of OS X main menu bar. Click the symbol. Then click About this Mac. A popup window appears that gives some basic info. Then, click the More Info button and both post your iMacs complete specs by selecting/highlighting all of the info and copy paste this into a reply to this post, editing out your iMac's serial number. Then update the info you posted in your user profile with some of this new found data for future postings.

Have loaded lion and now cant access office for mac or apple works as it says it does not support power pc applications, how can I acces them or better still reinstate them please

Have loaded lion and now can't access office for mac or apple works as it says it does not support power pc applications, how can I acces them or better still reinstate them please?

MS-Office for Mac versions 2004 and older do not run in Lion since these are PPC-apps for which Apple has dropped support.
Free alternatives to open Word and Excel files:
NeoOffice http://www.neooffice.org/neojava/en/index.php
OpenOffice http://www.openoffice.org/
Or get the 2011 MS-Office

Hey. I have a problem. I updated my mac os x to 10:8 for I can not start Acrobat Pro, which I bought six months ago. Proglamet says that the computer does not support Power PC. Help

Hey. I have a problem. I updated my mac os x to 10:8 for I can not start Acrobat Pro, which I bought six months ago.
Proglamet says that the computer does not support Power PC. Help
When I try to start it says (program "Acrobat 6.0.2 Professional.app" can not open because PowerPC applications are no longer supported.)
Please help

The version of Acrobat you have is a PowerPC application and will not run on Mountain Lion. You will need to upgrade/purchase an Intel version of Acrobat Pro, probably Version 9.
It might have been worth checking to see if the apps you run are supported on ML before upgrading. If you backed up your system before the upgrade you could always revert to your previous level.

Power Mac (MDD), New Apple keyboard does not have an Eject key

Newbie question...I picked up an Apple keyboard for an IMAC that does not have the open door key. Is there a combination of keys I can use to open the doors on my G4 MDD? My reqular keyboard, with the open door key, opens the doors fine.
Thanks in advance,
Frank
Message was edited by: frankmojz

Hi-
Welcome to Discussions!
Open System/Library/Core Services/Menu Extras. Double click on "Eject.menu", an icon will appear, and you can eject and close the drive from your menu bar.
If you hold the F12 key for 2-3 seconds, the drive tray door will also open and close.

TS1538 ipad does not come on once its unpluged from power source,it enters recovery mode when both power and home botton are pressed with usb on powersource but does not come up at all when connected to computer or out of power source

ipad does not come on once its unpluged from power source,it enters recovery mode when both power and home botton are pressed with usb on powersource but does not come up at all when connected to computer or out of power source

What model iPad do you have? If it's an iPad 1, the battery may have expired and needs replacement.
 Cheers, Tom

Time Capsule does not have a valid IP address

We have 2 computers in our home office: a Win 7 desktop and an iMac.
We have cable internet; the cable modem (Toshiba PCX2500) is plugged (ethernet) directly into the Time Capsule, which we use as our router to the two computers (also by ethernet).
The wireless functionality of the Time Capsule has been turned off.
We’ve been using the Time Capsule like this for the past 18 months (we purchased it new) without any problems.
Last month, however, we began losing our internet connection regularly (about 3-4 times per day) and getting the dreaded golden flashing light (as opposed to solid green) along with the error (paraphrasing here) “the Apple Wi-Fi does not have a valid IP address.”
We hadn’t made any changes in our hardware; it just showed up out of the blue.
After contacting our ISP, we were advised to unplug the cable modem for about 30 seconds, then plug it back it. Most of the time this worked; if not, we had to “cycle” the Time Capsule as well.
We’re now having to do this about 4-5 times per day.
Sometimes the Time Capsule’s status light is still green when we have no internet connection. Out of the blue the connection just isn’t there.
We “cycle” the cable modem and we’re back in business every time.
Additionally, when we actually do have an internet connection, the speeds fluctuate wildly. We’re paying for 15 Mb service; as of the past 4-5 weeks, we get 15Mb about 50% of the time. The other 50% it generally averages between 3Mb and 6Mb.
The ISP’s tech support (we’ve contacted them no less than once a week since this started) swears up and down that it’s the router, not their signal or their equipment in any way. They deny all culpability.
We even had the ISP’s repair people come out on an occasion about 10 days ago to test the signal strength; they reported no problems. “You’ve got great signal strength to your home…” were the exact words.
Similarly, after calling Apple on 2-3 occasions, we get the exact same response: “It’s not the Time Capsule router, it’s your ISP.”
The last Apple technician we spoke with (yesterday) said, “I’ve been doing wireless/Internet tech support for years and I can guarantee you – 100% -- that it’s a ‘DNS caching’ issue. I’m 100% positive that’s your problem, and I’m also 100% positive it’s your ISP’s fault.”
After contacting the ISP again we were informed that they don’t have any such caching problems.
We’re tired and frustrated! Please help.

I would suggest running the network via a pc for the day.. pick either your Mac or win7 pc.. you will need to do a bit of fiddling.. even better would be to just borrow a router. Or buy one on a 7day return .. !! Beg borrow.. don't steal. Just get a router other than TC. it won't take long to determine if the TC is the issue.
IMO at 18months you are suffering failure of the TC power supply. early days but it is showing signs of delinquency. And will get worse. But another router will show it up.. if the PC has dual ethernet cards you can run ICS.. or same sort of thing on the imac to the wireless .. ie the PC or Mac becomes the router with direct connection to the cable modem. Then share internet from there.
Once you do that for a day or two, you will quickly be able to track down if the issue is cable service/modem or the TC as router.

Your computer does not have sufficient memory to perform this operation in Captivate

I am currently new to Captivate 4 and I keep getting this error message "Your computer does not have sufficient memory to perform this operation. Do the following"
I am trying to publish a large project were I recorded voice discussions over a power point presentation. The project is about 41 slides long and recorded using the video camera option. What can I do to stop getting this error message and publish this project. Help!

Hi,
Please check the memory available in your system.
Also please try the following -
- Open your Captivate project which you wish to publish
- Go to menu item Edit > Preferences
- In the Preferences dialog, go to Project > SWF Size and Quality
- Uncheck the checkbox Advanced project compression
Now try publishing the project.
Regards,
Mukul

Iphone5 (6.13) wifi off network will be hours of continuous use, and ipad (5.11) does not have this problem

iphone5 (6.13) wifi off network will be hours of continuous use, and ipad (5.11) does not have this problem
Why this happen?

rest of the stats :
ADSL settings
VPI/VCI
0/38
Type
PPPoA
Modulation
ITU-T G.992.5
Latency type
Interleaved
Noise margin (Down/Up)
21.9 dB / 8.3 dB
Line attenuation (Down/Up)
42.5 dB / 21.8 dB
Output power (Down/Up)
20.1 dBm / 12.4 dBm
Loss of Framing (Local)
0
Loss of Signal (Local)
0
Loss of Power (Local)
0
FEC Errors (Down/Up)
11189 / 22
CRC Errors (Down/Up)
8 / 2147480000
HEC Errors (Down/Up)
nil / 878043
Error Seconds (Local)
5

Recently got new iMac with Lion.....when I try to load my LogicPro software, I get 'OS does not support power PC'. Is there a download to fix or must I spend another 500 on software?

Recently got new iMac with Lion.....when I try to load my LogicPro software, I get 'OS does not support power PC'. Is there a download to fix or must I spend another 500 on software?

What version of Logic do you have?
And if you end up upgrading, it's only $199 now.

Zen Neeon 2 does not have power at all

Similar Messages

Maybe you are looking for