Zen Neeon Firmaware upgrad

I just got a zen neeon and i'm looking into upgrading the firmware. My only problem is that i'm scared to do it because i've read that there are a lot problems occuring after people update their firmware
If anyone has any comments or suggestions on whether i should take the plunge and just upgrade it or wait for a newer upgrade, it would be greatly appreciated.
One more question, does upgrading the firmware void any of your warranty?
thanks

Absolutely identical problem! Fourth bar and all! Is there a solution to this?

Similar Messages

  • Zen Micro firmaware upgrade fai

    Hello! I have problem with loading new firmware into my Zen Micro. I tried both 2.2.02 and ..0 but no luck. It says "updating in progress" but progress bar never gets full, even I wait for hours. Also, after several tries to upgrade I lost old player's firmware - now every time I turn it on player shows "Firmware Problem" message and switches to recovery mode. Tried all the options there - Disc Clean Up, Formatting, Reloading(erasing) firmware but still remain the same - player is in recovery mode and nothing happens when trying to install new firmware from my PC. Did anyone experience such problem? What could be possible ways to resolve it's Thank you.

    Today tried installing firmware from another PC running WinXp SP. With v I had same result - no progress at all, v2 keeps asking me to check whether Windows Media Player 0 is installed on PC. I checked - Yes, it is. But had no further success with v2 By the way, my PC dows not have WMP0 (only 8) but v2 setup never asked me to check WMP version. So still looking how to install new firmare into my Zen Micro.

  • Help with my Zen Neeon. Can't upgrade firmwa

    Anyone using the Zen Neeon here.. I wanna ask how do you guys upgrade the firmware for Creative players... When I try to upgrade the firmware using the file that creative gave, it says "Device detection failed! Please power off it to generate system file." Pls teach me how to flash the firmware..

    It can vary a bit with different players, at least for the flash players. Some you just run the upgrade and connect, whereas with others you have to run a special recovery mode.

  • Can no longer access my menu on Zen Neeon

    I have upgraded to the .009 firmware so now my zen neeon loads quicker and skips tracks quicker but now when I press the scroll button to access the menu nothing happens except it resets to the first track on my player.
    I've tried resetting my player. I've created playlists which I can't access. I just can't get to my menu!!!!
    Do I need to do a recovery mode rescue?

    Thanks for the reply Edmeister. All the tabs take a moment attempting to load, then the Inbox Preview screen pops up. I have even uninstalled FF and reinstalled it. I've checked my settings even though I've made no changes in months. Again, the mail box has never had a problem until about 2 weeks ago. Fortunately, I can retrieve my mail through my old Eudora program and do the house keeping through IE8. Just wish I knew what has changed, i.e., my fault or a program.
    Thanks again.

  • Zen Neeon Questions/Prob

    I bought a zen neeon recently, but when it arri'ved the LOCK button doesn't work. Also the menus are really really slow, and there's no way I can find to get it to display the artist name for my songs. The FM tuner doesn't seem to pick any stations up either, I've put it on the desk next to another radio which works okay.
    I ran all the updates on it, but nothing has helped. I'm really miffed, it's like 2 weeks old.
    I li've in Japan so I have to post here to find if these things are normal or if they've shipped me some broken or test model by mistake.
    I got someone to phone their support (who speaks Japanese, but not so great English), who said send it back for repair or to get a refurbished one, but really I want my money back, cos it looks like i've been done. I really don't want a refurbished or repaired one either, cos I've had it like a WEEK! If I'd wanted 2nd hand I'd have gone to ebay and paid a lot less!
    I really want my money back but I suspect they'll only let me RMA it. Does Creative have a worldwide policy on refunds?
    I googled for firmware upgrades and found some mentions, my player has .0.0.5 according to its menu. I've seen mention of other numbers but nothing in creative america or creative japan websites. I ran the auto update tool but it says there's nothing new (tried both again, america and japan).
    Any ideas, or have I just lost a huge chunk o' money?

    hi,my name is Jessie, i bought a Zen Neeon from Hong Kong,but i li've in UK and it just started frozing today but i have never dropped it or damage it......i got really depressed
    can you speak japanese?

  • My Zen Neeon 5gb doesn't turn on correctly, only appears CREATIVE on the scr

    I need help because my Zen Neeon 5GB doesn`t turn on the right way. I was listening to music the one day before?and when I tried to turn it on it only appears on the screen: CREATIVE and the menu doesn`t appear on the screen and I can`t listen to music and it doesn`t turn off until I reset it. But you can listen to the hard disk running. I can use it like an USB device but I can`t listen to music. i tried with the upgrade from firmware but appears:
    Device detection failed! Please power off it to generate system file.
    Device upgrade failed!What happen is`t death?

    Have you tried anything in the recovery mode on the player. If not i would go to creative knowledge base and lookup "recoverymode." I would try the clean-up and format first.

  • Zen neeon os updates?, current OS SU

    Hello,
    I have been a Creative supporter for many years, sound cards, emu stuff, my family has multiple Creative MP3 players, 2 Zen Micros, Jukebox (20 gig), Zen 20 gig and now I purchase a Zen Neeon and am completely dissappointed by its completely lame OS. Bottom line is for 200 bucks (approx) I would certainly expect this nicely designed MP3 player to AT LEAST be able to resume its play back where I turned it off. I enjoy many long recordings, DJ mixes etc and that every time I turn it on it goes back to 00:00 is enough to make this a complete waste of $200 when I could have bought a Zen Micro instead. Second to this is the fact that it takes so friken long to change tracks etc... I do love the design and size and radio and all that and I really hope that Creative will properly support this product otherwise this puppy is going up on ebay so I can by a Zen Mico instead.

    Your FW is similar to your audio player's operating system. It can do many things, from fixing bugs to changing the GUI. Doing FW upgrades means that you upgrade your FW with a newer (or sometimes older) version.

  • Zen Neeon dead

    Hi,
    I've recently got a Zen Neeon - I'm in the UK but my dad bought it for me duty free in the Far East. I've had it a week and it's been fine. I was trying to record directly from a stereo through a line in, and this worked. When I'd finished I unplugged from the stereo and plugged it in to the computer. The 'connected to USB' but not transferring symbol came up on the screen of the Neeon, but the PC said 'USB device not recognised'. I unplugged the Neeon, and the 'connected via USB' icon stayed on the screen and I couldn't switch it off. I tried resetting, and entering recovery mode and neither worked. Finally by pressing all buttons randomly I got it to reset, and then reformatted the player. I uninstalled the software on my PC and started again from scratch. It was working fine again, so I resynchronised it and left it plugged in to the switched on computer overnight to charge (first time the battery has needed charging). This morning it was completely dead again - I've got the 'connected to USB' symbol on the screen, and nothing will wake it up or change it. I've tried the reset button, I've tried the reset button and the play key and I've tried uninstalling the software on the PC and starting again. Nothing works.
    I've phoned the helpline in Ireland, and they took me through all this again, and in the end said they couldn't help - suggested running the battery down until the player switches off completely - but that could take well over a week as it's new and just charged (and I can't use it at all). Is there ANYTHING else I can try? What've I done?!

    I had problems with my neeon
    I tried downloading driver but got nowhere but I got this back from technical support and after uninstalling and restalling everything this worked
    thank you for contacting technical support.Please try to do a firmware update and format of the player to see if this could fix the problems you're experiencing.First of all; download the Mass Storage Driver. You will find this here;http://sg.creative.com/support/downloads/Select MP3 Players --> Zen --> Your players name.Click "Next".Select "English", your operating system, "Driver"Click on "Go".Click on "Download now" to the left of the Mass Storage Driver. Save it onto your computer.You'll find the latest firmware version here:http://sg.creative.com/support/downloads/Select MP3 Players --> Zen --> Your players name.Click "Next".Select "English", your operating system, "Firmware"Click on "Go".Click on "Download now" to the left of the firmware.Click on "Agree".Proceed as follows:* Connect your muvo to your pc while holding the play button. Keep on holding the play button for about ten seconds.* Release the play button.* A dialogbox asking if you'd like to install a recovery device driver should appear.* Follow the insructions and install the device.- (I think the option I used was the first one)* When the player recovery mode is finished, you may double click the firmware upgrade file.* When the Audible Firmware Download appears, click start.* Follow the instructions on the screenn to complete the installation, tick the format data area box when it appears.* Disconnect the player.

  • Zen Neeon disappointm

    I had problems with my neeon player. Costumer support suggested the ff.
    For instruction about your specific player, please refer to <A href="]How to access the recovery mode of my Creative MP3 Player? [/url]</LI>
    Once in Recovery Mode, select <B>Format </B>(see the image below).</LI>
    When asked to <B>Continue</B> select <B>Yes </B></LI>
    When Formating has completed and unit returns to <B>Recovery Mode</B>, repeat the <B>Format</B> process again</LI>
    After the second Format, select Reboot option</LI>
    Allow the unit to rebuild the library.</LI>
    Then upgrade the Firmware</LI>
    All I see is the Creative logo on the player. My player is still frozen.
    Help, as customer support still hasn't got back to me.

    The player was fine for the first few months. I got it in August. It keeps crashing when I'm uploading files. I always have to format the dri've to upload all my songs again. This can be very annoying. I've updated the firmware so I'm hoping that is the end of that problem.
    At the moment the Zen Media Explorer is not displaying folder information when I go to the 'Organize Data in Zen Neeon' option. I don't seem to have the same problem when I access the player through Windows Explorer. This makes it impossible to edit my playlists as I can't see what is the folders.
    The Neeons sell for about ?20 on ebay. This includes postage. Message Edited by paulhino on -6-2005 0:37 PM

  • Zen Neeon Troub

    Hey guys,
    I have a 6gb zen neeon, and it has been working fine until yesterday when i decided to reformat it and put a heap of songs back onto it. Now for some crappy reason, once i have put all the songs back on it (i can browse the neeon on my pc), when i undock my mp3 player and turn it on, it says there are no songs on it.
    I have tried numerous stuff (format ntfs and fat32), using different sync products, but nothing seems to work.
    Please help!
    Thanks

    Just letting anyone else know that i fixed this problem. I reinstalled the firmware for it and it is all working fine now. I think when i formatted it, it removed the 'settings.dat' file from it. So upgrading the firmware put that back on, and all seems to work fine now. Good luck for anyone else that has this problem.

  • Zen Neeon Batt

    Help PleaseCan anyone tell me how I can get a new battery for my Zen Neeon 6GB, one month after warranty it has crashed and only shows the Creative symbol when connected to the computer (the computer doesnt even recognise it as being connected) and a large?empty battery icon in the middle of the screen when not connected, it wont charge or do anything - Creative want AUD$40.00 to have it serviced - is there anyway this can be done without the massi've cost. I have done all the downloads and upgrades etc, tried other USB...Will never get another Creative again

    Vamp wrote:
    Is there a way to check if your battery is fully charged without disconnecting the usb cable and turning the player on?
    I don't own a Neeon, but is there no onscreen indicator of charging?
    I'm wonder if disconnecting while its charging could harm the battery in any way or stop it from properly charging.
    It won't cause any problems.
    I've also noticed that sometimes even though the usb cable is connected the backlight is not on and the little wave (on the zen screen) doesn't move, there is just a line, at these times does it mean its not charging?
    Ah, it sounds like it does show something. Normally the manual has a list of the charging icons, but if it's a little line with a plug on the end that means with all the other players that it's operating off the mains and has finished charging.

  • Zen Neeon 'Frozen' at Creative Logo when inserted into U

    add me to the list of people who's Neeon freezes at the creative logo when connected to a USB port.
    I've tried to boot into the recovery mode, and the device appears as a 'player recovery device' however when the firmware update tries to update, the 'player recovery device' disappears, and windows tells me a USB device has malfunctioned and that i should re-insert it. which then makes the firmware update fail, as it loses the connection to the player.
    My Neeon is now a couple weeks expired from the 2 month warranty. as i bought it last year for my Xmas present. which means i'm pretty much stuck with a paperweight now as the knowledge base doesn't help me one bit and e-mail support wasn't exactly helpful either, as i only ever got replies that needed the player to connect to the PC. when it's not even getting to the stage where it will talk to the PC properly.
    i've always supported creative players, as they're about the same price as the consumer-tastic ipods, but offer many more features, and then this happens as soon as the warranty expires, which is really just like a kick in the face.
    if there's any way to workaround this that anyone knows of, i would love to hear from you, because i'd rather not have to spend any money to buy another player. (and chances are, it won't be a creative one)

    Yes I have been dealing with the same problem until the creative.com helped me.Here the solution :
    Creative Mass Storage Driver .07.00.250 (3.24 MB)
    http://sg.creative.com/support/downloads/download2.asp?Product=224&dlcentric=8983&Product_N ame=Zen+Neeon+5GB%2F6GB&OSName=Windows+XP
    After that, download the following firmware and use the below method to
    check if the player can be detected. If yes, reload the firmware to your
    player to resolve the issue.
    The firmware can be download from the below link:
    Creative Zen Neeon Firmware .0 (2.5 MB)
    http://sg.creative.com/support/downloads/download2.asp?MainCategory=23&Product=224&dlcentri c=9534&Product_Name=ZEN+Neeon+5GB%2F+6GB&OSName=Wi ndows+XP
    To install this firmware upgrade:
    . Press and hold the Play button while connecting your player to your
    computer's USB port.
    2. Continue to hold the Play button for 0 seconds after connecting your
    player to your computer.
    3. Release the Play button when the Find New Hardware dialog box appears
    on the screen.
    4. Follow the instructions on the screen to install recovery drivers for
    your player.
    5. Download the ZenNeeon_PCFW_LF__0_FM.exe file into your local hard
    disk.
    6. Double-click the firmware upgrade file and follow the instructions on
    the screen.
    I wish This could help you, as did it to me.(And sorry for my poor english)

  • How to output sound from Zen Neeon to speaker without using

    how to output sound from Zen Neeon to speaker directly?
    as far as i know, i can only play content in my mp3 player using speaker with usb cable connected to pc
    i just wonder how i play using "play" button in mp3 player and the sound will output to speaker directly?
    need extra line-in cable?

    my speaker system is subwoofer,but i not very sure it's 2. system.
    the cable from the speaker is slightly too big to connect to the player headphone jack. and no sound come out after i play.
    why?

  • Zen neeon problem...pleas, he

    i have my neenon about one month. so far it worked quite well until a few days ago. every time i plug it to the usb the computer seems to have a problem to identify the device and it gets stuck on this window (the window image is in hebrew):it seems to take to much time to act only on this process, and after it finally finished (about 0 minutes) it cannot open the neeon file and it says something about a problem with the input/output.i go to "zen neeon media explorer" and is says that the device is not even pluged in!?same problem with other comuters! so the problem is realy on the neeon. i already tried to press on play/off button and plug in the usb at the same time and then downloading?a firmware but it did not helped at all. can somebody pleas help me?

    Should I just get a new one?

  • BSOD when I connect my ZEN Neeon to my

    Hi,
    As said in the subject title.. My computer goes to the BSOD (Blue Screen of Death) each time I connect my Zen Neeon mp3 to it. This is the first time this has happened, just recently it started doing this, I've connected and disconnected the MP3 and the same thing happened 3 times in a row.
    Is there anyway to fix this and ways to prevent it's
    I took a photo of what comes up on my camera, so if I need to post it let me know. "fastfat.sys" is the technical error problem, that's what it says on the BSOD.

    Hey,
    Well somehow I've fixed the problem. I did some things?before I tried connecting the MP3 to my computer but whatever I did, it fixed it. I installed some Windows Updates and then connecting and disconnecting the MP3 quickly because apparently that does something - not sure though, so it could've easily just been updating my Windows Update.
    I didn't even have to download that Microsoft hotfix - thanks for the link though
    Cheers!

Maybe you are looking for