Zen Neeon Recharge on LCD screen even though not connected er

I purchased a Creative Zen Neeon 6 gig MP3 player last December 2005. I'm not having trouble where I can connect the MP3 Player to the computer, it will recognise the device and all the songs stored...what happen is when i safely remove it from the USB cable the Neeon will turn on, show the creative logo and then show the USB charging action on there even though it's not connected....Has anyone else experienced this problem? I've tried re-setting it but again the USB recharge action on the LCD appears again...Anyone fixed this? Any help appreciated, thought i'd try here first before contacting tech support again...

I tried clean up already, as stated above. Since then I have also tried reformatting the player again, adding new music, and retrying the clean up. The player seems to recognize that there is music on there when it builds the library, because the more music I have uploaded the longer it takes, but when it fully boots up it still shows NO MUSIC at all, no tracks, no artists, nothing.

Similar Messages

I tunes is looking for my i pod even though not connected. It then freezes trying to play anything. What can I do to correct?

I tunes searches for my i pod upon opening and will freeze when trying to play anything in the library until it is connected. What can I do to fix this? I

Try:
iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
Next, try doing a manual install/update using the instructions here:
iDevice Troubleshooting 101 :: iPhone, iPad, iPod touch

Ipod touch screen shows connecting to itunes when not connected to computer and will not go to start screen also will not connect to itunes get message that passcode needs to be entered but cannot get to that screen on ipod

ipod touch shows connecting to itunes on screen even when not connected to computer. cannot get to start screen to enter my passcode

Place the iPod in recovery mode to bypass the passcode (and essentially erase your iPod) and then restore via iTunes on your computer.

I updated my IOS on my iPhone 4S and it locked up. I had to restore my phone and now iTunes will not go past the setup your phone screen even though the phone as been restored. How do I get iTunes to go past this screen so I can sync my phone again?

I updated my IOS on my iPhone 4S and it locked up. I had to restore my phone and now iTunes will not go past the setup your phone screen even though the phone as been restored. How do I get iTunes to go past this screen so I can sync my phone again?

Depending on what iPhone you have when you get to the connect to wifi you should be able to activate your device over cellular data. Try doing a hard reset by holding the home circle button an power button until an apple pops up and the go through the setup again and when you get to the wifi part a option should be setup with cellular data iPhone 4 and above should give this option sometimes doesn't like showing up that's why u have to do a hard reset first

I try to connect to wifi in hotel. It shows its connected to the network but it never takes me to sign on screen and will not connect even though wifi shows full bars

I try to connect to wifi in hotel. It shows its connected to the network but it never takes me to sign on screen and will not connect even though wifi shows full bars

Have you tried clearing Safari? Clear Safari, close Safari completely and reboot your iPad. Try again.
Go to Settings>Safari>Cookies and Data.
If you are running iOS 5 or iOS 6 you close apps like this. Tap the home button once. Then tap the home button twice and the recents tray will appear at the bottom of the screen. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button twice.
If you are running iOS 7, you close apps this way. Double tap the home button and you will see apps lined up going left to right across the screen. Swipe to get to the app that you want to close and then swipe "up" on the app preview thumbnail to close it.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

My USB-Stick is marked busy even though not mounted (?)

Also Subject lines are too short.
Hello there, my name is Ayutac, I use Arch for some while now and I probably screwed up.
tl;dr: My USB-Stick is marked busy even though not mounted (?)
Previous History: I was trying to get the newest Arch iso on a stick of my friend, so I got the iso here and moved the stick's content to my extern hard drive. I used the opportunity to experiment how good "mv -t target_dir *" would work and interrupted it because I was stupid. Two folders somehow weren't movable through mv anymore, so I mv'ed everything else – now explicit – and moved the content of the two folders via pcmanfm. After that there were about 16kB on the stick left.
Next I copied the iso using
dd bs=4M if=/path/to/archlinux.iso of=/dev/sdc && sync
as suggested by the wiki. I looked at the stick; to my surprise the two folders I left there where still there, though filled with gibberish data. I thought I might give it a try, shut down, booted from stick. Black screen with a blinking text cursor for minutes. I concluded it didn't work and tried some other way. Following the wiki I was given the task to format the usb stick anew.
Thinking I knew what I was doing I used fdisk several times (including rebooting), getting myself two partitions with FAT32 (or so I think). But that somehow screwed it up.
The problem: After partioning and rebooting it seems I can't mount the partitions to copy the content of the iso. lsblk says
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
sda 8:0 0 931.5G 0 disk
├─sda1 8:1 0 21.7G 0 part
├─sda2 8:2 0 350M 0 part
├─sda3 8:3 0 95.4G 0 part
├─sda4 8:4 0 1K 0 part
├─sda5 8:5 0 95.4G 0 part /
├─sda6 8:6 0 7.6G 0 part [SWAP]
└─sda7 8:7 0 711.1G 0 part /home
sdb 8:16 0 465.8G 0 disk
└─sdb1 8:17 0 465.8G 0 part /run/media/nait/nanika
sdc 8:32 1 3.6G 0 disk
├─sdc1 8:33 1 650M 0 part
└─sdc2 8:34 1 3G 0 part
sr0 11:0 1 1024M 0 rom
(sdc is the stick) but I get
> sudo mount /dev/sdc1 /mnt/usb
mount: /dev/sdc1 is already mounted or /mnt/usb busy
> sudo umount /mnt/usb
umount: /mnt/usb: not mounted
Furthermore "lsof | grep sdc" returns nothing, neither does "cat /proc/mounts | grep sdc" or "cat /etc/mtab | grep sdc". The only clue is
> systemctl -a | grep sdc
dev-sdc.device loaded active plugged 1000 ARCH_201409
dev-sdc1.device loaded active plugged 1000 ARCH_201409
dev-sdc2.device loaded active plugged 1000 ARCH_201409
sys-devices-pci0000:00-0000:00:14.0-usb3-3\x2d3-3\x2d3:1.0-host9-target9:0:0-9:0:0:0-block-sdc-sdc1.device loaded active plugged 1000 ARCH_201409
sys-devices-pci0000:00-0000:00:14.0-usb3-3\x2d3-3\x2d3:1.0-host9-target9:0:0-9:0:0:0-block-sdc-sdc2.device loaded active plugged 1000 ARCH_201409
sys-devices-pci0000:00-0000:00:14.0-usb3-3\x2d3-3\x2d3:1.0-host9-target9:0:0-9:0:0:0-block-sdc.device loaded active plugged 1000 ARCH_201409
I tried to shut the devices down, but that didn't seem to work.
Furthermore the pcmanfm shows two mount points of the iso/stick but returns error message when clicking on them:
Error mounting /dev/sdc1 at /run/media/nait/ARCH_201409: Command-line `mount -t "iso9660" -o "uhelper=udisks2,nodev,nosuid,uid=1000,gid=100,iocharset=utf8,mode=0400,dmode=0500" "/dev/sdc1" "/run/media/nait/ARCH_201409"' exited with non-zero exit status 32: mount: /dev/sdc1 is write-protected, mounting read-only
mount: /dev/sdc1 is already mounted or /run/media/nait/ARCH_201409 busy
Goal:
1. Make the stick usable again, with 2 partitions.
2. Copy the iso on the first partition.
3. Have a functioning Arch booting stick.

Welcome to Arch Linux.
A few questions and comments. First, are the files you copied from the disk safe? Since the plan was to wipe the disk anyway, I would suggest next time copying rather than moving files. I always get itchy when I move files. I have made some stupid mistakes where I copied hundreds of files to one output file, each one overwriting the previous. Of course, as it was a move, the source file was gone as well. Fortunately, I maintain backups. I would also suggest you look into the rsync facility when doing bulk copies.
That said, another excellent way to destroy data is the dd command (There are those who claim dd means just that) Are you certain that the usb disk had been been placed at the /dev/sda node? In the thread title, you made the assertion that the drive was not mounted. dd will run just fine even if the disk is mounted (I do not recommend this). What were you using to look at those folders that had become full of gibberish? Command line tools? A graphical file manager? (Nautilus, Thunar, Dolphin, SpaceFM) It is possible that the tool you were using was unaware that the contents had changed and was using cached information.
As to your goals. First, copying the iso to /dev/sdc tells the system to use the entire device for the iso, not the first partition. Our iso is not designed to be placed in a partition, I don't think you will meet with success trying to block copy the iso to a partition. If you want to try it, the destination would be /dev/sda1 (for partition 1) Make sure the partition is large enough. I would suggest that you use the entire disk by dd'ing the iso to the /dev/sdc (assuming it is c) node, but make certain that all of the partitions are dismounted. I know you think you did that, but I have my doubts. Please use command line tools. I don't trust GUIs that try to help too much.
If you want multiple partitions, use fdisk and re-partition the device. Then create a file system in each of those partitions.
It has been a while since I have tried to master a USB that will boot. I may have a faulty memory, or I may be using really old, outdated, information, but... I think that a USB has to boot as if it were a CD drive . I am not certain that a hard drive type structure with multiple partitions and a MBR will work on a USB drive (edit)and have it be bootable. In other words, goal 1 and goal 2 might not be achievable if goal 3 means that the disk will boot. I could be wrong.
Last edited by ewaller (2014-09-27 16:18:25)

How do I get the internet connection back onto ipad even though it connects to Wifi successfully and I have checked on my iPhone which does connect via the same wifi and to the internet?

How do I get the internet connection back onto ipad even though it connects to Wifi successfully and I have checked on my iPhone which does connect via the same wifi and to the internet?

Your router may not have given your iPod a valid IP address. Go to Settings > Wifi > your network name and touch the ">" to the right to see the network details. If the IP address shown starts with 169 or is blank then your router didn't provide an IP address and you won't be able to access the Internet.
Sometimes the fix can be as simple as restarting your router (remove power for 30 seconds and restart). Next, reset network settings on your iPod (Settings > General > Reset > Reset network settings) and then attempt to connect. In other cases it might be necessary to update the router's firmware with the latest from the manufacturer's support web pages.
If you need more help please give more details on your network, i.e., your router make/model, the wifi security being used (WEP, WPA, WPA2), etc.

Used wrong charger with ipod classic, now it wont turn on, displays the low battery icon even though its connected to the wright adapter

used wrong charger with ipod classic, now it wont turn on, displays the low battery icon even though its connected to the wright adapter.
Can anyone help ?
please?

WHow long have you left it to charge? Have you tried resetting it after a short period of time to see if that can help jumpstart the charging process? To do this, press and hold both the Select/Center and Menu buttons together long enough for the Apple logo to appear.
B-rock

Hi I am having iphone 4S. Today while connecting to my laptop for regular update, my phone started rebooting and message showed error in rebooting. Now even though i connected to laptop which has internet connection, i phone OS booting still not completed

Hi I am having iphone 4S. Today while connecting to my laptop for regular update, my phone started rebooting and message showed error in rebooting. Now even though i connected to laptop which has internet connection, i phone OS booting still not completed

I have factory reset my phone twice.. I have disabled iCloud settings.. I looked up possible downgrading options.. which isn't possible. I feel as if my iPhone 4 was offered the update so I was forced to get another phone

HT5622 "ipad not backed up" it make locked to my screen, even OK not respond. How to remove this information?

"ipad not backed up" it make locked to my screen, even OK not respond. How to remove this information?

A reset may help: Tap and hold the Home button and the On/Off button at the same time for approximately 10-15 seconds, until the Apple logo reappears. When the logo appears release both buttons and await restart.

I accidentally deleted my music library from my old Mac and now I have a new Mac. Can i restore all my music somehow? Even though not all 10,000 songs were purchased from iTunes Store?

Can i restore all my music somehow? Even though not all 10,000 songs were purchased from iTunes Store?
Im so devastated and desperate to get my music back.
I deleted my User Account from the old Laptop

Unless you subscribe to iTunes Match , Apple does not keep a backup of your iTunes library. Even then it is not the library as it exists on your computer, but some version of the media, and only media files, not playlists. Even then not all media are definitely available since anything removed from the iTunes Store since you purchased it is not available for re-download.
FAQ: Why iTunes Match Can Not Be Used as a Backup - https://discussions.apple.com/docs/DOC-4112
Using Match as a backup for iTunes - https://discussions.apple.com/message/17039436#17039436
In your case it sounds like you will have to obtain non iTunes purchases from their original source or a backup you may have made at some time in the past.

OniPhone 6 Plus. Connectinge 6 Plus. Connecting Bluetooth to my Prius bluetooth has been successful However, I am unable to answer or place calls via the bluetooth connection even though the connection has been established. Can anyone help with this?

With my new iPhone 6 Plus. Connectinge 6 Plus. Connecting Bluetooth to my Prius bluetooth has been successful. However, I am unable to answer or place calls via the bluetooth connection even though the connection has been established. It worked well with my previous iPhone 4S. Can anyone help with this?

I can see that this issue has been quite extensive, and frustrating, and I am so sorry for all that has happened societygirl! I would like to help you work this issue out. Please follow & send me a Direct Message, so I can get your account specifics and help finally bring this to a resolution.
Thank you,
MichelleH_VZW
Follow us on Twitter @VZWSupport

Safari is slow to load pages ad even says not connected to internet but i am?

safari is slow to load pages and even says not connected to internet but i am?

How much free space on the startup disk?
Right or control click the MacintoshHD icon. Click Get Info. In the Get Info window you will see Capacity and Available. Make sure you have a minimum of 15% free disk space.
If you have anti virus software installed, that could be a factor.
Try troubleshooting third party plugins. Safari: Unsupported third-party add-ons may cause Safari to unexpectedly quit or have performance issues
Do you have Little Snitch installed?

Zen Neeon - Stuck on charge screen and not recogniz

Hey there,Purchased my Zen Neeon only 20 days ago, but last night I left it hooked up to my computer, and turned my computer off. Today when I booted up, it said new USB device found, followed by unknown device, I looked at my Zen, and it was on the charging screen. With no option in windows to safely revome, I unplugged it, and it remained with the charging screen on. When the power button is held in, nothing happens and the charge screen remains. Any ideas anyone? Or is it broke already :\.

I have somewhat the same problem. My Zen went dead and i tried to charge it. But then it couldn't charge and it wasn't recognized by the computer at all. The screen only displayed "creative". So i left it to charge over night, and the next morning the only difference was that the Zen was heated up. So, its still dead and i can't seem to fix it, cause it doesn't seem to be detected by the firmware. i'm dying without my zen! help, please?

I turned on My MacBook Pro, And there is no picture on the screen, Even though the keys have lite up as if the laptop is running perfectly, All except my blank screen ??

Any one help .... av tried the pram thing ??
took the battery out etc etc ??? am at a loss..

I agree Thedave413..... Just this aint never happened to me before you no .... Press the power button.. , the macbook pro makes the normal sound.... But the screen doesnt go blue, Or it doesnt do anything even though the keys soon light up as if the macbooks running perfectly, Al except my screen.. which is completely blank ???
Can anyone help at all with some good advice ???
As a trip to the genius bar is a 2 bus journey away from were I live....Good lord ....Oooooffftttssss...

Zen Neeon Recharge on LCD screen even though not connected er

Similar Messages

Maybe you are looking for