ZEN not charging / screen not turning o
Hi , I recently just picked up the ZEN 2gb Creative MP3 Media player. I followed the instructions more or less to the key, with the exception that when I was at my house (not my apartment where I am now) I charged the battery to full. Now when I plug in my MP3 player not only will the USB not seem to register it, but the little battery charging light will come on. I've installed the drivers or whatever as the setup mentions, but now it won't even register the device is connected. I've tried swapping which USB port it's plugged into and none of them are registering it. Is my MP3 player faulty ?
You didn't mention if the player had ever been previously recognized by the computer, but if it has, try going into Windows Device Manager and see if it is listed there. If so, try highlighting that entry and then select the Update Driver option. You won't actually be updating the driver, just select the option to install the drivers that are already on the system. Alternati'vely, you could just delete the entry, disconnect the player, and then reattach it. Both actions will yield the same result and Windows will detect and pair the driver to the player just as if it were being attached for the first time.
Similar Messages
-
Help! 4g Zen Not turning on to charge! Wont even turn on while trying to conne
I dont know whats going on. It stopped working friday, and i dont know how this happened. It tries to go on, i hold the switch at the side to turn it on, it flashes blue then shuts off like less than a second later. I have no clue how to fix this and my dad will get pissed if he finds out it wont work.Help me please.
He shouldn't get angry, unless you did something you weren't supposed to it isn't really your fault.
I would try resetting it - making sure to charge it immediately (sounds like the battery is low and it is shutting down automatically). It shuts down to retain some charge on the Lithium-Ion Cells to prevent what is called 'deep discharge', where the batteries go completely dead (it damages them and can cause the batteries to be unable to hold a charge effecti'vely - this is one of the cons of using LION batteries). -
my iPhone4 will not turn on or show that is working at all, i have tried to charge it so that the screen will light up but it won't work, when plugged into the computer iTunes does not show any sign it is plugged in, what do i do?
There is a hardware problem. Whether it's worth it to you to have no working phone for 2 months until you can update vs paying for replacement/repair now is a question only you can answer.
-
i updated my 4s yesterday, but my phone will not work at all now, and will not turn off. It has a itunes image on the screen with an arrow underneath and what looks like the charger lead. i've had it on charge! is there anything else i can do?
Cconnect it to your computer with the latest version of iTunes installed.
-
My iPhone 4s is stuck on a black screen that shows a USB cable connecting to iTunes. The phone will not turn on and the iTunes logo as I described only shows up when I plug the phone into the charger or my computer. I have tried the reset in restore mode as well as the DFU? mode and it still will not work. I have the latest version of iTunes on my Mac. My error code was 2002. I also tried it on my laptop (windows 8.1) and none of the above worked. My error code on my laptop was 02. The phone is through Verizon and it has absolutely no damage. It was working fine up until this and I have been trying to fix it for 2 days. Please help! I am unsure of what version the phone was currently running on before this because I have another iphone that's my primary phone and have not used this one in about a month. I do not believe it was updated to IOS 7.
Your iPhone is in recoverty mode at the moment so to possibly get it back up and running you would need to do a restore as you have been trying. Follow the steps in the article below for the specific error messages you have been receiving. If after following all steps the issue remains book an appointment at a local Apple Retail Store to have the iPhone evaluated.
Resolve specific iTunes update and restore errors -
my iPhone is fully charged and just gives me a blank screen and will not turn off, what do I do?
Reset the phone like the manual says: hold the on/off switch and the home button simultaneously until the Apple logo appears. May take up to 30 sec
-
My iphone 5 does not turn on anymore. when i plug the charger in the apple icon turns on and off but the home screen never shows up.what do i do to fix it? how can i get my info back?
from the information you provided i can't tell if it is a hardware problem or a software problem. I do have an idea though, try to press your home button and lock button at the same time.
-
My 4th gen iPod Touch has had a blank screen for about 3-4 weeks now, it will not turn on, sync, or charge. iTunes recognizes its plugged up, but i cant reset it because it says its passcode protected, but i cant enter passcode due to screen not lighting up or working. How do i fix this?
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings -
My iPod Nano 6th generation fell one time and it kept working with a small crack in the screen.But after a while it just gave out and does not turn on.I try to charge it and all it does is blink the apple icon on and off.When disconnected nothing happens.
I am having the identical trouble as described above with my month old Macbook Air. I tried everything with the ditto results. Please help anyone!
Mine is a Macbook Air 13', 128GB, 1.86GHz with 4 GB RAM. -
My IPad screen is dark and will not turn on. I have charged the battery and no luck. I have tried to restart it multiple times with no luck. During the restart, the screen will flicker like it is trying to restart but the silver apple never shows. Any suggestions?
Please tell me that it has NEVER been jailbroke. If it has never been jailbroke, here are some standard repair procedures:
First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. It could take well over an hour! Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow the on-screen directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore (or it doesn't help), go into Recovery Mode per the instructions here. You WILL lose all of your data (game scores, etc,) but, for the most part, you can redownload apps and music without being charged again. Also, read this. -
i have the ipod touch 4th generation and the screen is white, i was going to charge it and it turned white. I have tried to reset it but the apple logo will not show up and it will not turn on! i just got it for christmas... can you please help?
The way I did it was I got the free app sync:stream from the App Store and then added my ipod to my ps3's Bluetooth devices. Then went to audio settings and set output and input to 'Skaggs iPod' you then open the app and it will be listed under music as a media service. You then go to all tracks and click copy (press triangle) it will then begin to copy all of your songs onto your ps3 via Bluetooth. I haven't tried but I assume the same can be done with photos. I hope this was helpful reply if you have any questions :) good luck
-
ipod 5th generation will not turn on, charge, or connect to macbook laptop. i was using it for music then all of a sudden the screen went black and was unresponsive. i have tried using other cords. also my home button is broken. someone please help!
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
When my phone is not plugged into the charger or computer, it will not turn on at all; even though it is not dead. When it's plugged into the computer, it will go to a white screen with a grey apple icon and then it will turn off again and repeat. IOS7 and iPhone 5.
http://support.apple.com/kb/HT1808
Try this step and if you cannot get your device into recovery mode there is a chance you have a hardware failure and you need to call apple to see what service options you have. -
My iphone 5 died so I plugged it back in to charge and it will not turn on. It will turn to the screen with the apple logo and black screen then turn off again. Any suggestions?
I leave it charging until it gets back to full, usually it turns on after a little bit of time after plugging it in, but all its doing is going to the apple logo screen and going blank again.
-
my iPhone 4 has just shut down. Rang the phone then vibrated for 2 minutes bank screen, will not turn on, also tried charging and will not charge. Any suggestions? I did download a ringtone app and went on to iTunes to sync!.
Try charging the iPhone via a wall socket for at least 30 minutes then try a reset by pressing and holding the sleep/wake button and the home button for 20 seconds (maybe longer) until the Apple logo appears, ignore the red slider. Then turn back on. You won't lose any data doing the reset.
-
Help me please i have ipad 3 its screen goes blank white again & again ... last night i try to restart my ipad but after that my ipad is not turning on, when i put it on charge there beep coming again & again..
The Basic Troubleshooting Steps are:
Restart... Reset... Restore from Backup... Restore as New...
Restart / Reset
http://support.apple.com/kb/ht1430
Backing up, Updating and Restoring
http://support.apple.com/kb/HT1414
If you try all these Steps and you still have issues... Then a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step...
Be sure to make an appointment first...
Maybe you are looking for
-
5th Generation iPod Touch Syncing issues
I recently receive a 5th Generation iPod Touch as a gift and I am having issues with it. I plugged the iPod into my Windows 7 PC with iTunes 11.4.0.18 and had issues from the start. First, my iPod would not even sync any media content from my library
-
Problems with new installation of iAS on Windows
This is a new installation of iAS 10.1.2.0.2 on Windows. The application server doesn't come up properly after reboot. The log file D:\Oracle\ora101_infra\opmn\logs\OC4J~OC4J_SECURITY~default_island~1 contains an error stack that begins with: SSO: DB
-
Hi, Hope someone can advice on this. I have a client who is using 2 external screens with Lenovo X200 laptop. Display is all fine but he wants to span toolbar across both external screens. Not sure whether this is possible with Intel Media Accelerato
-
Using the network load balancing from the nodes itself
I have installed a 2 node Sun Cluster 3.2, configured a shared ip resource and attached to it a scalable network aware resource working on the two nodes. I have crashed the process on one of the node in such a way that the cluster could not restart i
-
Help Required 3rd Nano in three months
My third Nano in 3 months has just died with the same fault. It can only be used when attached to a power source. It seems to lose the power software for the battery and when you put it on charge it just constantly charges and never finishes. Attach