Zen NX reverted to old firmware - won't display new firmwa

I upgraded my firmware quite a long time ago on my Zen NX. I was having trouble recently getting creative mediasource to recognize my player on my new computer (still haven't figured that one out), so I went through all the usual stuff where you clean up and reboot and all that. Well, after the reboot the player was displaying the old firmware with the scroll down menus rather than the graphic tabs (and with a few extra bugs too like when I turn it on now it always goes to the menu screen with volume set on '7' and will often say "add tracks to playlist" when there are already tracks in the playlist). I've reloaded, erased again, loaded again, cleaned up, rebooted and it STILL displays the old format firmware (and the little bugs appear to still be there too). Any ideas other than format the player?

The "tabs" view is an option on the player's setup menu - figured it out!

Similar Messages

  • How to revert to old firmware version

    how can i revert to old firmware version for 2700 classic. i.e from v7.80 back to v 7.15.thanks

    MY MOBILE NOKIA 2700 CLASSIC... BEST MOBILE
    my problem is very severe mate...
    1st problem) i got low phone memory peoblem...
    then i given to customer care ...he  doesn't solved & arises some more problems.
    he told me
    i just updated ur software version 7 to 9.95(2-04-10)
    but i got....
    2 problem)restarting my mobile when some body callme or lift the call
    3rd problem) when iam connected to net through mobile only it completely downloads application finally it  displays "invalid application".
    before update same application snaptu.jar file fully worked for me
    at present invalid application.
    wats the problem any body solves this ......????
    i got problem in   NOKIA PRIORTY .i ...who will be rectify this problem ????
    i din't understanding.....!!!!!
    ANY BODY PLZ HELP ME....!

  • ZEN files,software from Old computer ..to..new computer???

    My old computer is Windows XP...32 bit. In a few days I will have a new computer with Windows 7.....64 bit. How do I transfer the my ZEN files and software that is on the old... to the new computer? I want to keep my ZEN MP3 player like it is.
    Is it necessary for the *Geek Squad* or somebody like them to come and do it. I am a novice.
    Thanks, Ron

    You should not need to install ANY Creative software. Windows Media Player can sync files to the player. If you just can't li've without Creative's software then the software pack for the Zen for the Win7 64bit OS is here http://support.creative.com/download...nDownloadId=20

  • PSE8 Organizer won't display new files

    After copying photo files into a folder, I opened PSE8 Organizer and imported the files.  PSE8 reported importing 578 photos.  I clicked to Show ALL.  Only the original 24 photos in the folder are displayed.
    I have tried rebuilding the catalog, and deleting and creating a new catalog.  Nothing seems to work.  The rebuilding of the catalog reported the files are there and do not need to be imported.  But PSE8 still won't display any but the original 24 files.
    Any ideas would be appreciated.

    Edit > Visibility was set to Show All Files.  In Preferences, I unchecked all filter selections for Auto Analyze.  No effect.
    I have one folder with 3 .tiff files that PSE8 Organizer won't display.  Trying to import the files and PSE8 says they are there but PSE8 cannot display them.  No explanation.  Windows Photo Viewer and Picasa have no problem displaying them.
    I have deleted and made new catalogs with the same results for that folder.  I cannot figure out what is wrong with these files.  All other applications have no problem.
    Any ideas?
    Thanks!

  • ZEN MICRO problems..reverting to old firmware possib

    Hi,
    I just upgraded to the new firmware .0.03 (since I don't have Windows XP to install the 2.00 version)...and i'm noticing a lot of freezing problems....
    Is there a way to go back to the original firmware that was initially installed? ThanksMessage Edited by Tiger23 on 0-09-2005 0:0 AM

    sigh.. I've tried that and it doesn't work....still freezes at the creative screen.... I suspect it may be a hardware problem since when it freezes at start up, there is no hard dri've sound. Before, when it was working well, you would hear little hard dri've sounds at start up....but whenever it freezes at start up, there is no hard dri've sound so it's kind of like the hard dri've is loose? So i tried tapping the zen micro, and after many many tries...it started up again, but then after a few songs, it froze......
    I tried recover disk clean up, but when I select that...it freezes as well....it freezes at the "scanning disk..." screen of disk clean up..... I know something is wrong since I've tried disk cleanup when the player worked and it would be fast and would say "scanning disk.....25%....etc.....now i don't even see the progress percentage........
    I'm calling support on monday..........anyone know how to fix my problem? Will RMA cost me a lot of money? I went broke after buy the zen micro....sigh..............

  • Mac Mini Server won't display new web content

    I have my server up and running and my webpage (jacrouch.com) is up and running as well with coldfusion and SQL working. I have had some issues with a specific SWF file containing three links that disappears from several pages, but is working on one page. I have attempted to correct this and made changes to ensure that the SWF file is indeed working properly on my development machine.
    I uploaded the corrected files, but the web content does not change. I have completely deleted old content and ensured that the new files contain the corrections, but still the old files are the ones displayed on web.
    Any help is appreciated.

    OK. I just had a brainfart...
    apparently, when you run coldfusion on a server (this is my first time doing this), your server root folder as well as the coldfusion (wwwroot) root folder need to match. I just had to copy and paste my files into coldfusion and it runs great!

  • Zen Micro and USB 1.0 == Errors! (w/ new firmwa

    Hello,
    I use my Zen Micro to connect at work and at home. But alas it will not work correctly at work (USB .0), constant lockups and incorrectly reports a full player when it has gigs of space left (after a cleanup).
    This is using all 3 transfer options, WMP 0.0, Explorer, and Zen Micro Explorer.
    On my home computer (USB 2.0), it works w/o error. No problems whatsoever.
    Creative can you please fix this?

    . I shutdown my Zen Micro and leave it long enough to shutdown completely (friday -> monday) (until the "quick restart" function times out, and it takes ~5s to start it, whatever that function is called, please make it settable).
    This has been a request since the days of the Nomad Jukebox 3, but for whatever reason Creative have never added it to the settings. There's of course a petition at the moment specifically for the Micro to be able to change this, more for the folks that think the battery drain is related to this "standby" mode.
    2. I start it up, and the micro for some reason starts to rebuild the library. It freezes for a few seconds at the end, then half the screen gets random characters and it sends out some buzz sound. Crash. 3. The only way to get it working again is to remove the battery, go into rescue mode, and run "cleanup", restart and let it rebuild the library again. This time it succeeds and everything works.
    Shucks, although I've not seen anyone else mention this yet... It would be worth logging it directly with support.

  • Fnd_new_messages won't display "new line" in sswa

    I created a new message in FND_NEW_MESSAGE, and I can't get "new lines"/"carriage returns" to display properly.
    Can someone explain how to get this to work? I am currently using BR, enclosed in <>, to force newline.
    For Example: ( i am using the tag properly, but for this posting i need to use the spaces before after BR) Message_text = 'This is line 1 < BR > This is line 2 ' <BR>
    In SSWA, should display as: <BR>
    This is line 1 <BR>
    This is line 2
    <BR>
    however, displaying as:
    This is line 1 < BR > This is line 2
    Thanks

    If your requirement is to have custom html message rather then the standard message, you can pass ur custom html in OAFormattedtext bean
    --Mukul                                                                                                                                                                                                                                                                                                                                               

  • ICal won't display new invites

    Here's my problem.
    I scheduled events in Outlook on my work computer. I invited myself by sending an e-mail to my mac at home. From Mail, I clicked on the event on my mac. It opened iCal. Then, nothing. It doesn't display, it doesn't allow me to do anything.
    Please help me.
    iMac   Mac OS X (10.4.6)  

    I get the same problem responding to invites from another mac user - he uses iCal to invite me, both of us have the latest iCal, both of us have a .Mac account, both use Mail, both have the right addresses in the 'Me' part of Address Book etc. I don't understand!
    When i receive the invite by Mail, I click it, iCal opens but that is it. Nothing else. Nothing appears in the Notifications window, the event does not appear in any of my Calendars and I have no option to assign it to a particular Calendar - nothing.
    When I send my friend an invite it works fine at his end though! Typical...
    Help much appreciated
    Thanks

  • Won't display new message indicator

    My Tour is receiving new emails but not displaying the red new message indicator.  What do I need to do in order to fix this setting?
    Solved!
    Go to Solution.

    PeterH wrote:
    Yes.  I emailed myself from my gmail account. 
    Because of the "read" reconciliation on the new BIS features, that will not be recognized as a new message, but as an already "read" message, and not trigger the new message indicator.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • 3.4 gig Free on my Zen Xtra 60gig and this wonderful firmware won't allow anymore transf

    I am beginning to really hate Creative and how they choose Microsoft over their loyal customers. I cannot transfer anymore music to my ZenXtra 60 even though I have 3.4 gig free. I keep getting error messages saying library is full or I get just an error message. I bought this player to fill up 60 gig's not just under 60 gigs. Is this company for real? It took me close to 3 weeks to transfer to this player what normally would of taken up to 4 days. I HATE THIS FIRMWARE I HATE THIS FIRMWARE. Anyone know what's going on?

    brotsalami wrote:as far as i know, this will not work
    All the same I can't see how can this hurt to try...
    Do try it and see for yourself, even send an email to support and ask them if and how can you revert to v firmware...
    Do try it anyway, it can't be worse than sulking...
    Either way do remember to BACK UP since a firmware reload deletes everyhting!!!
    Keep us posted
    Catherina-CL wrote:
    This firmware upgrade enables playback of subscription music service content on the Zen Xtra, but may reduce the total number of files that the player can store. The actual results will vary depending on content specifications, and the result may be more evident in players with larger capacity.
    Arg!
    Does this mean that the "wonderful" MTP uses cluster sizes that further reduce the possible storage ammount?
    As if I didn't already hated it as it is...
    darn you Micro$ost!!!Message Edited by Keyper7 on 02-23-200605:49 PM

  • Revert to/backup old firmware?

    Hi!
    Is there a way to backup the old firmware? Or to restore it afterwards. Because right now, I'm very happy about the noise level (actually, it's non-existance) and not at all bothered by the heat, so I don't really feel to need to update. But on the other hand, I've heard from some people, that they updated their MBs would still be silent, but cooler, so I'd like to try that, but without risking my actual MB, which makes me very happy...
    Any chance?
    Thanks
    Greg

    Oh man, don´t touch this. My MB (Black 2 Ghz, 10.4.7) was absolutely quiet,
    I never heard the fan in 2 months though I moved roughly 2 TB of data in and
    out. And now the fan howles like Steve Jobs´starting Learjet after maybe
    copying 200 MB of a 3 GB Image file. And iChat is a new experiance as well:
    iChat transmittes the roar quite faithfully, real HiFi man &%#.....
    So, how can I get rid of this #&%# ?
    Want my old good MacBook back asap!
    Thanks for any help!

  • Airport Extreme, need old firmware, help

    I have an airport extreme and I need to revert back to an older version of the firmware. Specifically I need the 7.2.1 firmware.
    A link is here, http://support.apple.com/kb/DL218  And it does not work...
    Where can I find a copy of that specific firmware?

    The reason:
    I have jailbroke my apple tv and I an using the extreme as a hub to pass through my hard drives so I can see them on XBMC (XBMC is the media center program I am running on the apple tv box)... I need the old firmware so I can make it work...
    When I recieved the extreme this morning it had 7.2.1 installed on it... But I am a retard and upgraded because I did not know it woudl be a problem... Then to make things worse, I was not aware that upgrading the firmware was the problem, I thought it was the utility settings I had changed, so I removed the utility and reinstalled it... So now I do not have the option to fall back on 7.2.1, which was installed this morning...
    So I am hoping to find a copy somehow so I can restore it and make this all work the way I want it to... It sure would be cool if the apple link worked, so I could restore it that way...

  • Old G5 won't start in target disk mode.

    I'm trying to migrate from my old G5 (2003) to a 'new' (second-hand) G5. When I run Migration Assisstant on the new one and it asks me to start the old machine in target disk mode the old machine won't boot up. I have wireless keyboard and have tried pressing 't' on start up to no avail so I have also tried rebooting via the 'Start Up' pane of System Preferences. When I do this it boots up to the blue screen with yellow firewire logo then after less than a second it powers down.
    There are no other firewire devices plugged in and as far as I can tell all the firmware etc is up to date (Software Update runs every week)
    Grateful for anyone who has any ideas.
    Matt.

    Hi Matt-
    No chime is significant.....
    It would be best to reset the PRAM on the old G5. This is best done with a wired keyboard, though you can try it with the wireless (may not work). Hold the CommandOption+PR keys and startup. Hold the keys until you hear the second startup chime, then release. The machine should then continue on to boot normally.
    After the PRAM reset, the Startup chime should be restored, and, hopefully, so will Firewire Target Disk mode.

  • Downloading old firmware

    Hi
    How do I download old firmware?
    I'm interested in firmware .00.07 for Nomad Juke box Zen.
    This is a quote from
    Creative NOMAD Firmware Version .2.02 Web Release Notes
    . Upgrade Requirements Your player's firmware version should be at least version .00.07. If you do not have this version, please download it from www.nomadworld.com. Note that after upgrading your firmware, you will not be able to downgrade it.
    But I can't find this firmware at this site. I would be extremely happy if anybody could help me with this.

    Thanks for the info
    I actually managed to fix it before reading your message. I had serious troubles updating the firmware via the firewire connection, but it worked when I switched to USB ..
    The thing I was afraid of was that it wasn't gonna work because I had inserted a new HD (the old one broke... my fault... dropping the player one time too many) and therefore had no firmware at all installed.
    But at least now I don't need to look for the old firmware.

Maybe you are looking for

  • Help needed in the logic

    i hav select query like this:- SELECT COUNT(*) INTO NO_OF_WORKERS FROM PA0000 WHERE ENDDA = '99991231' AND STAT2 = '3'. with this select query , i can get the no. of workers . How can i get the no. of workers in the recording period <u><b>excluding</

  • Newbie problem with new objects and tools.

    in chapter 4 of the after effects essential training series from Lynda.com in the section about controlling animation with the pick whip. when he applies the null object the red bar immediately populates (correct usage?) the timeline to the right. wh

  • Parent nodes have themselves as childs, in contrast to BW hierarchy

    Hello Gurus, I have a problem concerning hierarchies and grouping in CR2008. Inserting the hierarchy works fine, but here's the problem: Every parent node has itself as child node, i.e. the hierarchy shown is: 1 1.1 1.2 1.2.2 1.2.3 instead of the cor

  • Report painter - library : 8A2 -  characteristic  isn't available

    Hi I'm trying to use characteristic  "Record Type - RRCTY " in a report from library 8A2, but this characteristic isn't available to use. I check the definition for library 8A2 and field "record type" is ready to be used   (Indicator: Use characteris

  • Multiple Duplicate Mailboxes in Sidebar!!

    Hi. Anyone seen this one? After installing Leopard, in addition to Mail hanging up on quitting, I now have 15 duplicate, inactive mailboxes on the Mail sidebar. Because they're inactive, I can't highlight them to delete them, they stay grayed out and