ZEN NX xfer probl

When I try to transfer files from my zen to pc music library and when i use the nomad file explorer aI get low disk space warning i have 400 gigs+ of hdd space whats the F'ing problem?

the same thing has happened to my zen nx player.
its sounds like it under water.
but if you play it through my p.c. with headphone jack and the usb it sound fine on the p.c. speakers.
and before you ask, i tried other headphones.
and also when you take out the usb cable from the player the sound get funny again.
i tried new firmware, but with no luck.
my girlfriend is going mad.
please help.

Similar Messages

  • Zen v plus probl

    i've only had my zen v plus for a day and decided to charge it overnight. when i was listening to it this morning, after a song finished, it just turned off. i pressed the reset button multiple times but nothing happened. if i try to turn it on, nothing happens - i even tried to press other buttons and held them for more than 30 seconds.
    so far, nothing has been working.
    i even linked the player to my comp through the usb cable and the computer didn't even detect it - so i can't even update it firmware.
    has this happened to anyone else - if so, do you have a solution?
    thanks

    try this I found it on another website I had the same problem and it worked.
    To solve this, plug in your hardware and wait for the prompt to search for drivers.
    If no drivers are found, click on the "advanced" option of locating the drivers manually.
    If you dont get an option of browsing manually go to Control Panel > Device Manager and Find your hardware thats not installed. Right click on it and select Update Driver Software.
    You get asked to Browse your computer, or you can enter a file location. Simply place the following in, or find the folder on your computer
    C:\Windows\System32\DriverStore\FileRepository
    Click next and Windows searches that folder... and finds your drivers... installs them and sorts it all out.
    This has solved my problem with my Creative Zen V Plus MP3 player and some other hardwares which cannot be recognised."

  • Creative zen microphoto booting probl

    My creative zen microphoto wont load. It's just a black screen with the creative logo. I have tried to format it from the recovery mode but that freezes too. Can anyone tell me any possible solutions to this problem?

    same problem here, creative logo stays until all the juice is drained

  • Nomad Jukebox Zen Xtra FIRMWARE PROBL

    In the spring of 2005, I bought a 40GB Nomad Jukebox Sen Xtra. It worked for a little over a month without any problems. Since then, it shuts off on its own and?it freezes. For the first time since I bought it, I attempted to load new music onto it. Now whenever I turn it on, it reads "re-building library..." and then it's stuck on "Firmware Problem."? I tried updating?the firmware from the website, but since?my computer no longer recognizes that?the player is?plugged in.
    ?I welcome any suggestions for this problem. Please help me so I can stop regretting my decision to buy this...

    Kayla24?Looks like you're going to have to start regretting buying something?made by?Creative. There are oodles of stories on these boards regarding software problems and creative mp3 players. Creative have published ?'updates' that effecti'vely disable players but will not take any action unless the machine is still under warranty. The last e-mail I got from tech support said 'We know the firmware [update] disabled your machine, but unless it is still in warranty there is nothing we will do about it."? It was a Zen Xtra 30GB, it's now a paperweight. If your's still turns on, try reinstalling the firmware on a old pc/laptop that has never had Windows Media on it, but has been updated to media player 0. This sometimes works - otherwise join the crowds and get an i-pod. At least they work - and Apple fix 'em when they break 'em.

  • Nomad Jukebox Zen Xtra connection probl

    Hello Everyone.
    First off, I am using Nomad Jukebox Zen Xtra (30G) with Windows XP - SP2. A few days ago my Zen Xtra would connect to my pc but as of today it no longer does. After searching through similar posts I am assuming it's not a problem with my Zen but with my PC. None the less, I did do my best to troubleshoot myself. I downloaded all possible firmware/drivers from Nomadworld.com. However - the firmware upgrade would not complete due to the fact that my device is not connected. I tried connecting my player to other USB ports on my PC - no luck. I used Nomad Explorer to do my transfers and as suggested in the FAQ, I tried downloading others (ie: MediaSource) however these wouldn't install because it could not detect any device. When I go to Device Manager/USB/ my Nomad isn't even listed. I have tried 3 different USB cables. The player isn't locked. Other devices work with the usb cables and port (ie: logitec clicksmart camera)
    So now assuming it is a PC problem, where do I go from now? Thanks in advance for any help you can give me

    Hibbs,
    Thank you for your response. The only thing that comes to mind is k-lite codec pack I downloaded and installed for the Indeo codec needed for my clicksmart 820. I'm not sure if that would have anything to do with the disruption of my device. The camera itself worked but wouldn't record videos until I installed the codec. Everything else to my knowledge is the same. No other new USB devices installed either.

  • Jukebox Zen Xtra - "Harddisk Probl

    So tonight I brought my Zen home and plugged it into my computer to add some new music when I realized it was no longer working. I had been playing music earlier today. Now however, it boots, freezes at the welcoming screen of EAX, and then reverts to safe mode. I can not use any options in safe mode however, except reboot which allows it to reboot into the same problem. Any ideas on what I can do? Sorry if I'm a noob. It's a 40 gig and I've had it since about last may.Message Edited by victim on 02-03-2005 07:32 AM

    Anecdotally hard disk problem means the player is faulty and needs to be repaired/replaced. You should either return it where you bought it or contact Creative Support.
    You can try the advice here in the Zen FAQ at Nomadness.net if you want, at your OWN RISK.

  • Jukebox Zen NX bootup probl

    My Nomad Jukebox Zen NX refuses to boot up past the EAX screen. Was working fine until i plugged it into my computer, then it froze and could only be rebooted by removing the battery. Now it doesnt load up. Any ideas on the problem, sorry if this is a commonly asked question. Already

    deagz wrote:i tried that quite a few times with no results. i keep the play button held down for quite a while. tech support told me to do the exact same thing, but it doesn't open any menu, it doesn't even turn on. any ideas on what may be the problem ?
    Did you try plugging your player into the Wall outlet and then try turning it on? Torstein.
    Please help me with my post: A Petition to ask Creative to update the firmware of the Zen Touch to Include EAX capabilities.

  • Creative Zen Microphoto Charge probl

    hi i bought my player online over the internet. I bought a charger separate in HMV, does all mp3s. It only charges however when its says battery low on screen-can't charge it any other time.its really annoying. Whats do you think the problem is?

    The Zen MicroPhoto also charges over your computer's USB ports.
    Have you tried that?
    The Creative Zen Micro charger is only $9.95 and is designed to work with the ZEN MicroPhoto, ZEN Micro and ZEN Neeon.

  • 60GB Zen Vision: M probl

    My screen went black after I stopped using it. I quickly grabbed a toothpick and hit the reset button to see if it would fix itself up, but as it starts up, when the screen that says "ZEN" goes up, it freezes, and my hard dri've starts making weird, but small noises. Soon, the Recovery Tool came up, and I hit "Reboot", but it froze again at start-up. When the Recovery thing came back up again, I heat "Clean Up" just for the hell of it. I was listening to some music minutes before it happened, then I went to my computer to listen to some music and whatnot. When I checked it, it was like how I mentioned earlier.
    It just finished cleaning up, and then I hit Reload Firmware, so now when I reboot it, it says Firmware Problem. What do I do now? Kinda new to this. :\
    I'm very careful of my Zen Vision: M, only time I've had a problem with it was when my 7-year-old cousin used it without my permission, and it tripped, but it only went, bottom first, nothing too serious.
    Please, for the love of God, help me out with this. I haven't even had a whole month with the thing, and I have no warranties nor anything.
    EDIT: I downloaded a new firmware, and that seemed to fix it. Weird... I got this fixed and all, but can anybody tell me why this happened in the first place? Thanks.Message Edited by jc_352 on 09-0-2007:6 AM

    ok, update. My player has now switched itself off and nothing will do anything to it, not the power button or connecting it to the computer. Trying the recovery tool simply gives a "player not connected" message, even though it is.
    When I do connect it, there's a little flashing blue light under the power button.
    ...help?

  • Zen Vision M Probl

    My Zen Vision M is now Rebuilding Library each time I turn it on. The MP3 will play songs but not display artist, song title, and time remaining. It has deleted all my pictures, but the music is still there. Each time I connect to?my computer it does not recognize player and before this there was no problems.

    So I tried something and it made my computer recognize my player, i ran the recovery mode on the player. You haveto turn it off and then turn the power on but dont let go of the power, hold it on the power, then immediately stick something into the reset button on the bottom and press it once. then the screen will go black, when the creative logo goes back on, let go of the power. It will take u to the recovery. Then u can either run cleanup which will not erase any data, reformat which will erase, or reload? new firmware, which u can only do if u have new firmware on hand. Then back up ur data and Then try to run the recovery program from the creative website.
    http://www.creative.com/products/mp3...l/welcome.asp?
    that one hopes it works for everyone?

  • ZEN NANO PLUS PROBL

    Songs are not playing back that are loaded on the device. The names of the songs display on device but will not play...it skips the songs. I've updated the firmware. I've tried deleting all of the music on the device and reloaded and a few songs will play....all of the music is from Napster.
    The songs on the zen are displaying when connected to PC. Used Creative Organizer to transfer songs to player.
    It should not be this difficult. I had a RIO FORGE that was a piece of cake and thought I'd try another player.....

    Songs that you bought on a per song basis will play on the Nano Plus if you use Windows Media Player or the Creative software to transfer them. The songs that you got from an unlimited subscription service won't play on the Nano Plus. The subscription songs will play on a Zen Microphoto, Zen Sleek Photo, Zen Vision m, or the new Creative flash players Zen V and Zen V plus.Message Edited by JK23 on 06-26-2006 05:43 PM

  • Transfering music from Napster To Go to Creative Zen Sleek Photo probl

    Hello
    I have a Creative Zen Sleek Photo with Napster To Go. I have Windows XP home edition. I can rip a CD to the hard dri've
    of the computer and transfer music to the mp3 player, but I am receiving a message when trying to transfer music files
    from Napster To Go. The message is the mp3 player will need an update to the firmware to work with Napster To Go.
    The Zen Sleek Photo has the latest firmware. I had been able to transfer music from Napster To Go until recently.
    Napster support referred me to Creative support but the Sleek Photo is past the warranty. Any help would be appreciated.
    Thank you.
    Bridget Ferrazzano

    I had problems for the first month of my Napster membership (while I was still in the trial period). I nearly went elsewhere, but stayed with it. As soon as the trial period was over, everything worked perfectly. One suggestion is to use the same software for everything. Whether you use Creative media source, Napster's own software or media explorer or any of the others, stick with that one only. Do not give up and go to itunes. What a waste of money!?If you need to reload firmware or try another software, it's worth it.
    I also had some issues getting help. Napster said the problem was with Creative and Creative said the problem was with Napster. Don't give up. Can you get ripped songs in?

  • Zen Xtra Software Probl

    Hi...
    i had bought a few weeks ago a Creative Zen Xtra with 60GB, i had bought it in Italy but with the different languages it isnt any problem to use it! The Zen Xtra is international isnt it's
    My Problem is the Software, the CD where is in the package with the Zen Xtra cant open with autoplay and i cant open any software!
    A have a few questions:
    . With which programes i havo to load music from pc to the Zen?
    2. It is a problem for the Zen that i dont have USB2.0 ?
    3. Why the CD doesnt open with the autoplay ?
    4. Can i take the mp3s with another way on my Zen ?
    Thanks a lot for all answers! Need your help!
    bye soeren

    Duplicate post.

  • Zen NX Firmware probl

    I updated my firmware on my Zen NX Several months ago with the newest firmware, and since then all of my music sounds really weird. I would like to make it work again. I have already gone and bought a Zen Xtra. but I would like to use this as an backup or let someone in my family use it. Does anyone have any idea what's going on?

    the same thing has happened to my zen nx player.
    its sounds like it under water.
    but if you play it through my p.c. with headphone jack and the usb it sound fine on the p.c. speakers.
    and before you ask, i tried other headphones.
    and also when you take out the usb cable from the player the sound get funny again.
    i tried new firmware, but with no luck.
    my girlfriend is going mad.
    please help.

  • Zen microphoto firmware probl

    I have a zen mircophoto and it said it had firmware problems and i did the reload firmware but didnt have a computer with me. now when i pulg it into the computer to try to reload the firmware it says it doesnt detect the player but it charges and says recovery mode on the top of the screen. i dont know what to do to fix this problem and i could use some help thanks!

    Try reloading the firmware. It needs to be connected to your computer to reload firmware.
    Click the Support menu on the Creative banner at the top of the screen and click through the menus until you get to the MicroPhoto's Downloads page.
    Filename: ZENMicroPhoto_PCFW_L6__3_0.exe
    Requirements:
    * Microsoft? Windows? XP Professional x64 Edition, Windows XP (Service Pack or later) or Windows XP Media Center Edition 2004
    * Windows Media? Player 0 or later
    * AudibleManager version 5.00 or later for Audible audio content playback
    * USB . port (USB 2.0 recommended for faster transfers)
    * Creative ZEN MicroPhoto
    Notes:
    * To install this firmware
    . Download the ZENMicroPhoto_PCFW_L6__3_0.exe file into your local hard disk.
    2. Connect your player to your computer.
    3. Double-click the firmware file and follow the instructions on the screen.

Maybe you are looking for