Zen Only Plays Laeft Channel Through Car Ste

i got a new car stereo a couple of days ago with an AUX jack on the front. When I tried my Zem Visiuon M through this jack, i only get the left channel. I've tried using the headphone jack and the audio output jack on the dongle with same results. CDs and radio play stereo, so it's not a problem with the speakers. My headphones play both channels. When hooked up to my home stereo, again, both channels play. Any ideas as to what I'm doin wrong?

First thing. Make sure the cable you are using is a stereo cable. See if the car stereo has an input balance. Are you getting the same sound from the right and left speakers, or just getting sound from one side?

Similar Messages

  • I have a new PC and I tunes had to be added from my old PC to my new one, now some of my music is only playing half way through on both my PC and IPOD Classic

    I have a new PC and I had to transfer my I tunes from my old PC to my new PC and now some of the songs only play half way through on both my PC and Ipod Classic
    How can this be fixed, I noticed also that on I tunes on my PC before purchasing a song I listen to it and now it is only playing like 4 seconds of the song and I have opened up the URL and it still won't work correctly. PLEASE HELP

    Are these songs that you purchased from the iTunes Store or imported from outside of iTunes? If there are iTunes purchases, delete them from your main iTunes library and redownload them again at no cost via iCloud.
    Downloading past purchases from the App Store, iBookstore, and iTunes Store
    B-rock

  • I've recently downloaded an album but some songs only play half way through and i'm no longer able to hear any audio. What can i do about this? Thanks

    I've recently downloaded an album but some songs only play half way through and i'm no longer able to hear any audio. What can i do about this? Thanks  

    I am sorry to hear. Yes it's very disappointing and the fact that you can't at least re-download your purchase makes it that much more irritating haha well thank you and good luck!

  • HT203167 I bought a song using an I-coke credit and it only plays half way through then it skips to the next song??

    I recently bought a song on I-tunes using an I-coke credit, the song only plays half way through, before it skips to the next song, does anyone know what is going on and what I can do to fix this??

    Remove the song from the device either by using a computer or on the device itself.
    You can redownload any song that you have currently purchased for free through itunes on a computer or iOS device.  After deleted attempt to redownload the song.
    Follow instuctions here to download a song onto a computer or here on a iOS device.

  • PPRO is only playing solo channels - how do I get it back to playing both

    I've been editing a project for about six weeks and had no problem importing audio and video.  Everything had been synched up ok and PPRO was behaving normally.
    I've had two weeks off and have just imported more footage but the audio now doesn't play properly.  It will only play a mono track through one speaker/headphone if I select it as a solo channel.  If I play both channels together it goes silent.
    I've installed PPRO 6.0.5, running Windows 8.1 on a custom built PC - 8gb ram, 256gb SSD.  I'm using a separate sound card, but on board graphics card.  The audio files are wav files.
    I suspect I've unwittingly pressed a button I shouldn't have, as it has been working fine on the same project before.  I've gone through the other sequence tabs and the sound on those is now behaving in the same way (ie mono only if selected as solo channel).
    I've checked the driver for my sound card, and my speakers and headphones are otherwise working fine.  The sound mixer is showing sound being "perceived" by the software, because the levels are bouncing appropriately.  The levels in both channels are bouncing also - it's not that only one channel is processing data.  It's just that I can't hear anything unless I select just one channel, and then it comes through mono in one speaker/headphone.
    As and experiment I've also started a new project and just put some bars and tone in it, but alas it is doing exactly the same thing.
    All help gratefull received!

    Thanks for getting back to me Jim.
    This is what the properties tab of the audio clip says:
    Type: Windows WAVE audio file
    File Size: 5.3 MB
    Source Audio Format: 48000 Hz - 24 bit - Mono
    Project Audio Format: 48000 Hz - 32 bit floating point - Mono
    Total Duration: 00:00:38:14211
    I had assumed the audio was two mono tracks.
    I may not have explained myself perfectly.
    I can hear the audio out of whichever solo channel I select, but not both channels at the same time (eg in my bars and tone experiment, I can switch between channels and here tone in either, but not both simultaneously).  My deduction from this is that the sound card, speakers and headphones are ok.  I've listened to music etc through my headphones and know also that stereo is working ok.
    Previously I could hear both channels simultaneously.  Whilst I could carry on as it currently is, I would only be able to hear the audio out of one speaker/headphone.  Plus I also want to know what has changed since I started the project and it was working ok.
    Could it be a problem with a codec?  Or an issue with upgrading to win 8.1? My sound card is a Creative Technologies Sound Blaster X-fi Xtreme Audio card.
    Thanks for you help

  • Play other apps through car stereo like pandora an aol music

    With the increasing number of music apps other than the ipod I'm looking for a way to play those through my car stereo. I have an 06 VW Jetta that has a built in ipod player, when I plug it in it goes directly to the ipod and only plays ipod if I'm in another app switch to another one it always goes back to the ipod. I would like to play pandora or aol music or flycast any of them throuigh the car stereo and I wanted to know if anyone knows a product that can allow me to do that. Or how I can do that now. I have the cassette player through the headphone jack but my car doesn't have a cassette player. Any help is greatly appreciated.

    Apple has an accesory that transmits from your phone to any stereo/radio via the FM band...just pick an unused spot on the dial.

  • ITunes only outputting left channel through Soundsticks

    I've been using the original Harman Kardon Soundsticks (USB type) for about six years now without problems, but just today they've started behaving oddly in iTunes and Front Row. Only the left channel is now output, through BOTH speakers. They work normally when I use the Quicktime player, but not iTunes/FR. If I switch the output to internal speakers, then iTunes outputs both channels normally. I tried deleting the preferences, and updating iTunes to 8.01 from 8.0 but without any difference. Have also tried rebooting, disconnecting and reconnecting the speakers, and the power to the speakers but nothing seems to make any difference. Additionally, there's no "balance" option in System Preferences for USB speakers.
    There clearly isn't anything physically wrong with the speakers themselves so can only assume there must be a corrupted preference file or similar, but have no idea where to start looking. Can anybody help?

    I have the exact same problem but I use Windows vista into a MOTU Ultralite Firewire interface outputting to some powered monitor speakers. I know the issue has got to be with iTunes because i can open the mp3 in windows media palyer and it plays just fine in proper stereo. It's really annoying and I cant seem to find the solution.

  • QuickTime only plays its audio through my interface

    I installed the Windows Media plug-in for QuickTime and I can now stream and preview content I could not have before. However, for some reason, the streaming content I wish to listen to (audio from a radio station) only plays through my audio interface.
    I would visit the web page that has the streaming content and their little commercial with video plays fine through my internal speakers. However, once the content I want to see starts playing, for some reason it plays through my audio interface connected via USB. The thing is, not only have I made sure that the audio preferences are set to 'internal speakers,' but at some point the content I want to hear actually played through my internal speakers! What am I doing wrong?

    That's weird! The content won't even play if I try unplugging the USB connection to my audio interface. It says "Unknown Error -2004."

  • Computer only plays one channel of audio

    I use an HP Sleekbook 14 PC and recently it stopped playing out both channels of audio. I only get one channel. Any easy fixes?

    Hello, @festerdude 
    Welcome to the HP Forums.
    It appears you've lost audio. I will try to help you with this.
    No Sound from the Speakers (Windows 7)
    No Sound from Speakers (Windows 8)
    Follow the document for the version of Windows installed on your notebook.
    Make sure that you've updated the drivers, use the HP Support Assistant for this.
    Please let me know the results and if you run into any issues.
    Thank you for posting on the HP Forums.
    I worked on behalf of HP.

  • Speaker jack only plays right channel

    Hi everybody,
    since a few days when i plug my speakers or earplugs into the speakers-jack, only the right channel has been playing. I already checked "balance" in the system preferences - it is centered.
    Can someone help me with this?
    Thanks.

    Hey thanks for replying so quickly. Could have been the solution (jack in/out too often). Though my problem was solved in a different way a minute ago:
    After plugging in my earplugs again i just realised, the balance-settings automatically change depending on which output you use. So some days ago I must have been dragging the balance-fader to the right and unplugging the speakers then the system auto-saved.
    So you always have to check "System Preferences / Audio" with the plug inside the jack.

  • Bought a movie on itunes, it will only play half way through on my new macbook air

    please help me! i just got a new macbook air for xmas and i had a 50$ giftcard for itunes. i bought a movie and started to watch it and it only plays halfway through. i've tried to fix it, but nothing works.

    contact iTunes support.

  • Purchased songs only playing half way through

    I purchased 2 albums today and a few songs on each only play half through then skip to the next. I deleted and redownloaded, still having the same problem.

    I deleted and redownloaded, still having the same problem.
    Try deleting and redownloading just the problematic tracks (rather than the entire album(s)). Any better luck with that?

  • I bought a Tv show on Itunes and It will only play half way through.

    I Just bought Warehouse 13 season 3 Episode 1 'New Guy.' from the iTunes store and the video only plays to the 16 minute mark when the TV show is about 45 minutes long. What do I have to do in order to watch the rest of the video?

    You should have received an email receipt from iTunes and it should contain a link to report problems, .If not, then use this link to contact iTunes support. https://www.apple.com/emea/support/itunes/contact.html

  • IPod says "No Content" in music, and suddenly I can only play that content through iTunes on my computer...

    Can anyone help me?
    I have been having terrible problems with my i-Pod Touch. I have very slow internet (often only 2 or 3 kb per second) but Apple seems to demand I do countless time-consuming updates. For this reason I haven't been able to update my iPod to iOS5........I have also had the whole run of errors when I connect my iPod to iTunes to update anything. I have had Error 13109, 5826, 1604 and 3194....but all of that hasn't bothered me too much as I manage to transfer music from CDs or computer files (podcasts from non-iTunes sources) and that's all I need.
    All of a sudden yesterday, whilst continually giving me the error 13109 message, my iPod said I have no content in the music library. However, when I plug in the iPod to my computer and switch on iTunes I can see those songs are still there, and indeed I can play them. Until this morning I was able to play that content from my iPod through my loudspeakers that have an iPod dock - completely unconnected to my computer.
    It just means that I can't play those songs when I am anywhere except connected to my computer - and that's not really the point of having an iPod is it?
    Is anyone able to help me?
    By the way, I should like to say that I am very new to i-Pods, and I already think it is absurd that a customer should be constantly obliged to update everything, and when things go wrong visit all manner of websites (and Apple Support Communities!) to hunt for solutions, and then spend hours and hours going into the belly of my computer, making changes, downloaded, syncing, re-booting and goodness knows what else to just try to get the product to do what the manufacturer said it would do when I bought it, without telling me anything about all this other hassle. I think it is shocking, or have I just been sold the only lemon in the orchard? I bought it in Mozambique and live in Zimbabwe - and none of these places offer support services.
    tks for nay advice or commiseration you may be able to offer.........
    Nick (aged 50, and ignorant).

    OK guys...no need to reply....I am resigned to never getting to the bottom of the syncing problem....I just go from 13109 to other error codes, downloading little umbrellas, putting th eipod in DWI mode (or something like that), restoring, getting anew error code, not being able to download updates etc. etc. - so I lost my patience with sitting in front of my computer trying to fix something I paid nearly usd 800 for (in my opinion the manufacturer should make it properly in the first place, or warn you about its faults before you buy)............
    I synced my iPod to the computer, lost all my content ans restored only witrh what I had on this computer's iTunes - thus losing the countless CDs and vinyl I had converted to digital on my other ocmputer at home in Mozambique, which my current iTunes says it can't locate.
    Am I really the only person who prefers to listen to music instead of spending hours and hours on the computer trying to fix this useless machne?
    I wish I had never wasted my money on this thing. I guess it's just inappropriate and too sophisticated for where I live and for my simple needs (wi-fi and music only).
    Very big thumbs down from this novice for the iPod Touch and for the iTunes way of doing things in general.......

  • Stereo tunes only play one channel and Internet hangs after 4.21 Install

    My daughter recently updated her 2nd Gen iTouch to 4.21 which I assume is an operating system.  On stereo tunes, now only one of the stereo sound channels plays (right side).  On older monaural songs, both right and left earphones produce sound.  Also, Internet hangs now after initial home page load.  How do I either roll back to an older version of the OS or get fixes for 4.21?

    http://www.thehangtime.com/gb/gbfaq2.html#leftspeakeronly

Maybe you are looking for

  • Exporting iTunes Music to Ext HDD

    Hi all, I just bought a Seagate 300GB Ext HDD with Firewire. My intention is to move all songs from iTunes currently in my iMac HDD to the Seagate Ext HDD. Thereafter, I hope to access my iTunes from this ext HDD. Pse advise on a. Whether there is a

  • Screen off center = won't close properly?

    I've noticed that the screen to my MBP is off-centered to the left (when facing it, open). There is clearly a gap in-between where the display connects on the right and not on the left. I also have noticed that on the left side (when MBP is closed af

  • Stamping tiff images

    Hello, I'm looking for a way in Java to stamp tiff images. The images have the following criteria: format A4, single page, black and white, g4 compressed, single strip offset. A formatted number has to be added in the right upper corner of each image

  • EOF in utl_file

    Hi I want to read a file using utl_file package but the problem is that my files has few blank lines is when i run the Loop my program crashes.. Can anyone help how to display the full file. Cheers

  • ADD_SUBSET_PROPAGATION_RULES dont work for update command!

    DECLARE v_src_db VARCHAR2(120); BEGIN SELECT global_name INTO v_src_db FROM global_name; DBMS_STREAMS_ADM.ADD_SUBSET_PROPAGATION_RULES( table_name => 'ICIS.TRANS_TABLE', dml_condition => 'des =''MIS'' and flag=0', streams_name => 'STREAMS_PROPAGATION