Zen or Zen Vision
I'll be buying two, primarily for my two daughters, 5 & 6yrs. They'll be used for music & movies on trips.
I know the Vision M has an actual harddri've, and the other one is expandable via SD Cards, but what are the primary differences users see? Are the screens comparable, or is one brighter than the other? Would the Vision be safer for young ones since there's no dri've with moving parts? Do they play the same formats?
The Zen Vision M is harddisk based while the Zen is Flash Memory based. Harddisk are very fragile especially for something as small as what is used on the Vision M, shaking it or dropping it may damage the harddisk. The Flash memory can handle such stress a lot better and the worst that could happen when it is dropped or stepped on is cosmetic damage.
If you are looking at a portable device then the Zen is definitely the way to go since it is physically smaller, lighter and more durable. If you however need a larger storage space or need to plug the player to view on a TV then the Vision M is better.
The Zen is only capable of viewing movies which has a form factor of 320x240 pixels and cannot view anything bigger. Basically you need to resize the video to fit that form factor. This will inevitably allow you to safe on storage space.
Technically, the Zen Vision M is no longer in production and what you get are the remaining stocks.
Similar Messages
-
Numbers of colors on the screen? Zen vs. Vision
Hi
I am thinking about getting either a Zen or Zen vision M player. I can see that the Zen has 6m colors on the screen and the Vision "only" has 262k colors can I see the difference?
thanks for your help?
Anders LindhjWell, the difference IS significant when viewing pictures, as well as videos. It's like setting your TV color setting to 30% (Zen V M) and then to 00% (Zen).
The ZEN is a huge improvement, as I have both the Zen and ZVM -
Downloads for Creative Zen mp3 player Vision: M (30
My new Zen 6GB freezes up in mid-40 degree temperatures and won't reset. It just gets stuck, then the battery goes dead, and it wont restart until fully charged again. When it's cold I can't even reboot it with a paper clip. If I leave it in the car for more than an hour the same thing happens. Is this a known problem I never had these problems with the godawful iPod. I can't imagine it's "normal" for it to be unusable outdoors whenI bought the black Creative Zen mp3 player Vision: M (30 GB) back in August 2007, and both discs that came with product are lost, and I need to desperately replace them. I know where the download section on the Creative website is, the problem is that I do not know which two programs came with my player initially, thus I do not know what to download. Can anyone tell me the names of the discs that come with this model so I would be able to download the correct two programs Thank you kindly. John it's 5 degrees above freezing. Thanks.
I'm pretty sure that won't work on a Mac.
Check the install disk, it might say what systems are supported. If not, look at the files on the disk. If they're all named like PC files they're likely for a PC. If the disk has a Mac partition the files will look like they have Mac-style icons and names.
I also note that Macs don't use an 'autoplay wizard'; that's a PC thing. -
Help me,please - ZEN MICRO/ZEN V PLUS AC POWER ADAPTER compatibily
Hi to everyone,
I bought a ZEN V Plus (4 GB; DAP-FL0036), I already had got a ZEN MICRO (5 GB; DAP-MD0004, it purchased on march 2005), I would know if the ZEN MICRO's AC Power Adapter (data: AC ADAPTOR Model no. SCP050000P; P/N AD20000002870; Output 5V - 000mA) is full compatible and usable with ZEN V Plus too.
Best RegardsZen Micro Power Adapter: ZEN V Plus[/b], ZEN V, ZEN MicroPhoto, ZEN Micro and ZEN Neeon
-
When is the Zen V & Zen V Plus availabe in Austral
Hi,
I was wandering if anyone has any release info on the Zen V & Zen V plus for the Australia region? Knowing Creative Australia, by the time it get's here it will be 'uped by Crapple!Creative announced US pricing of $30, $70, and $230 for the gig, 2 gig, and 4 gig model. Those higher numbers you see are in Singapore dollars. Often if a price is in Singapore dollars there is an S before the price. The exchange rate is roughly .6 Singapore Dollars equals one US dollar.
-
Question about the new battery for zen micro/ zen microph
i just reacently noticed that creative has a new bettery the?Li-Ion Battery (830mAh) for ZEN MICROPHOTO/ ZEN MICR0 on there website they say it gives longer battery lifeand i was wondering how true this could be because i would like to get more than 6 to 8 hours out of my zen micro
The Zen MicroPhoto uses more power than the Zen Micro would, so it has a better battery. But you can use this battery with the Zen Micro and it should last longer than your original battery.
Cat -
Folder navigation in ZEN and ZEN MX
I have a question about the ZEN and ZEN MX players. Is there folder navigation(such as that in windows explorer) or are the songs sorted by Artist, Album, etc.?
The Zen is a wonderful player. If you store the songs inside the player, it would support ID3 tagging browsing. However if you want to browse by Folder put the songs in your SD card and use the 'Memory Card' option to view the songs via folders.
-
Creative Zen vs Creative Vision M question regarding d
Ok im traveling a lot so i descided to purchase one of those players so i can watch moovies . The problem is that i like the creative zen but i read that there is a problem with this model regarding the divx playback well not much of a problem but its still pain in the neck if you need to convert every video file to 320x240 everytime you wana watch something wich is not the case with the Vision M model with wich you just need to upload the moovie into the device from what i hear is there any truth to that because that will determine wich one i choose or that problem has been solved already !
What about direct playback in the vision M series do you need to convert the file to 320x240 divx format in order to play it or it will play anything with curent resolution lower than 720xXXX ?
-
Using new Creative Zen without Zen Media Explo
Hi
I have just received my Creative Zen. I wanted to use it like an external hard disk as well as an MP3 player but on my computer Windows XP only detects the Zen after I have installed Zen Media Explorer. This means I can't use it on other computers without installing the software.
However it looks like some people have been able to plug and play:
http://forums.creative.com/creativelabs/board/message?board.id=pmc&message.id=45483
What's the story?I don't think you get that New Hardware Wizard if you have Windows Media Player v. on your system.
The drivers are in the WMP software. If you don't have WMP v. you should upgrade. Do you get the new hardware wizard as soon as you connect with your USB connection? If so, that tells you that your USB connection is good.
Have you installed the Creative Media Source and the Zen V Media Explorer software on your PC yet? If you are like me - the last thing you look at is the User manual. I just about tore my hair out when I first got this thing because I didn't have even a basic understanding of how it worked. Then I discovered the "User Guide" in the software package on the PC, and it really gives a lot more information than the little user manual that comes in the package. Ithink you will find a lot of answers there. Don't know why people don't want to use the ZenV Media Explorer.
As I have come to understand this setup, the Creative Media Source is the software that resides on your PC and acts as your Player/Organizer but the Zen V Media Explorer is software that actually resides on your player and acts as your player's file manager. It is to your player - what Windows Explorer- is to your PC, PLUS other functions. I could be wrong about this, but I think that if you want to just be able to drag and drop files and use your Zen V like a flash dri've, you have to do some configuration for mass storage. -
Zen 4 - Zen 6.5 Inventory database upgrade fails
Hi all,
Have installed Zen 6.5 over a Zen 4 server (nw65) running inventory.
Database is on a seperate oracle server.
When I start inventory, it starts the database upgrade and then fails
with a java exception part way through, and then says "stopping the
upgrade service".
Following is the log. Anyone know which bit is falling over and why?
There's a few errors in the log and I don't know which are cosmetic/non
critical. Either way, I've researched each and can't find any fixes
anyway.
cheers
Dave
[12/8/05 14:58:40.307] ZENInv - Server Config: The severconfig service
start is pending...
[12/8/05 14:58:40.464] ZENInv - Server Config: Getting Cascade INit
time
[12/8/05 14:58:41.462] ZENInv - Server Config: Database Location
Policy DN is CN=Server Package - DAN02:General:ZENworks
Database.OU=POLICIES.OU=APPLICATIONS.O=CHISHOLM
[12/8/05 14:58:43.573] ZENInv - Server Config: The severconfig service
is started...
[12/8/05 14:58:43.707] ZenInv - Upgrade Service: Info : Read
zenInvComponentStatus = 6.5 12 0
[12/8/05 14:58:43.707] ZenInv - Upgrade Service: Inventory Server
zenInvComponentStatus = 6.5 12 0
[12/8/05 14:58:43.720] Service Manager: start(ServiceDataAccessor,
String[]) not found in
'com.novell.zenworks.desktop.inventory.storer.Stor erServiceInit'
[12/8/05 14:58:43.740] ZENInv - Storer: Start with
'ServiceStatusChangeListener' invoked
[12/8/05 14:58:44.824] ZenInv - Upgrade Service: Unzipping the file
migrate.zip
[12/8/05 14:58:46.718] ZenInv - Upgrade Service: Transforming the
Migration SQL files...
[12/8/05 14:58:51.768] ZENInv - Storer: zenworks.isClosed =true
[12/8/05 14:58:53.699] ZENInv - Storer: The current NDS tree=CIT
[12/8/05 14:58:53.724] ZENInv - Storer: Storer from dblocation user:
MW_DBA driver: oracle.jdbc.driver.OracleDriver protocol: jdbc:oracle:
subname: thin:@ port: 1522
[12/8/05 14:58:53.728] ZENInv - Storer: url[From DBObject]:
jdbc:oracle:thin:@ora01a.chisholm.vic.edu.au:1522: dw
[12/8/05 14:58:53.756] ZENInv - Storer: wsdn:
CN=DAN02_ZenInvService.OU=DAN.O=CHISHOLMi = 0
[12/8/05 14:58:53.973] ZENInv - Storer: Loading Storer test properties
file
[12/8/05 14:58:54.053] Service Manager: start(ServiceDataAccessor,
String[]) not found in
'com.novell.zenworks.desktop.inventory.strconverte r.STRConverterServiceInit'
[12/8/05 14:58:54.059] ZENInv - STRConverter: Start with
'ServiceStatusChangeListener' invoked
[12/8/05 14:58:54.755] ZENInv - Status Reporting: Messages are written
into XML file for DN=CN=DAN02_ZenInvService.OU=DAN.O=CHISHOLM
[12/8/05 14:58:54.914] ZENInv - Status Reporting: Number of records to
add are: 1 for DN=CN=DAN02_ZenInvService.OU=DAN.O=CHISHOLM
[12/8/05 14:58:55.012] ZENInv - Status Reporting: Adding record 0 for
DN=CN=DAN02_ZenInvService.OU=DAN.O=CHISHOLM
[12/8/05 14:58:55.729] ZENInv - Status Reporting: Number of modified
records are: 0 for DN=CN=DAN02_ZenInvService.OU=DAN.O=CHISHOLM
[12/8/05 14:58:55.780] ZENInv - Storer: Database is not
initialized..will retry after 300 seconds
[12/8/05 14:58:55.787] ZENInv - Storer: Storer: Database not
initialized as it is being upgraded ...will retry after 300 seconds.
[12/8/05 14:58:55.788] ZENInv - Status Reporting: Messages are written
into XML file for DN=CN=DAN02_ZenInvService.OU=DAN.O=CHISHOLM
[12/8/05 14:58:55.826] ZENInv - Status Reporting: Number of records to
add are: 1 for DN=CN=DAN02_ZenInvService.OU=DAN.O=CHISHOLM
[12/8/05 14:58:55.860] ZENInv - Status Reporting: Adding record 0 for
DN=CN=DAN02_ZenInvService.OU=DAN.O=CHISHOLM
[12/8/05 14:58:57.439] ZENInv - Status Reporting: Number of modified
records are: 0 for DN=CN=DAN02_ZenInvService.OU=DAN.O=CHISHOLM
[12/8/05 14:59:04.100] ZENInv - STRConverter: Loading STRConverter test
properties file
[12/8/05 14:59:04.201] Service Manager: start(ServiceDataAccessor,
String[]) not found in
'com.novell.zenworks.desktop.inventory.senderrecei ver.control.ReceiverServiceInit'
[12/8/05 14:59:15.618] ZENInv - SendRec Common: entPushDir =
SYS:\ZENworks\Inv\ScanDir\EntPushDir
[12/8/05 14:59:15.618] ZENInv - SendRec Common: entMergeDirD =
SYS:\ZENworks\Inv\ScanDir\EntMergeDir
[12/8/05 14:59:15.618] ZENInv - SendRec Common: dbDirD =
SYS:\ZENworks\Inv\ScanDir\DbDir
[12/8/05 14:59:15.625] ZENInv - SendRec Common: serverName = DAN02
[12/8/05 14:59:15.626] ZENInv - SendRec Common: serviceDN =
CN=DAN02_ZenInvService.OU=DAN.O=CHISHOLM
[12/8/05 14:59:15.626] ZENInv - SendRec Common: treeName = CIT
[12/8/05 14:59:15.626] ZENInv - SendRec Common: hasSSD = false
[12/8/05 14:59:15.626] ZENInv - SendRec Common: hasISD = false
[12/8/05 14:59:15.626] ZENInv - SendRec Common: hasESD = true
[12/8/05 14:59:15.632] ZENInv - SendRec Common: hasDB = true
[12/8/05 14:59:15.633] ZENInv - SendRec Common: securityDir =
SYS:\PUBLIC\ZENWORKS\WMINV\PROPERTIES
[12/8/05 14:59:15.661] Service Manager: start(ServiceDataAccessor,
String[]) not found in
'com.novell.zenworks3x.desktop.inventory.senderrec eiver.control.ReceiverServiceInit'
[12/8/05 14:59:15.882] ZENInv - CascadedBaseTime Server:
zenInvCascadeBaseTimeService: CBTServiceController: Startup Properties:
{basetime=Thu Jan 01 10:00:00 EST 1970,
servicename=zenInvCascadeBaseTimeService, portnumber=0}
[12/8/05 14:59:16.367] ZENInv - IFS Server: zeninvReceiverService:
FileServiceController: Startup Properties: {chunksize=4096,
transfers=100,
rootdirectory=SYS:\ZENworks\Inv\ScanDir\EntPushDir \ZipDir,
timeout=60000, servicename=zeninvReceiverService, portnumber=0}
[12/8/05 14:59:25.771] ZENInv - TCPReceiver: cascadingBaseTime = 0
[12/8/05 14:59:25.771] ZENInv - TCPReceiver: entPushDir =
SYS:\ZENworks\Inv\ScanDir\EntPushDir
[12/8/05 14:59:25.777] ZENInv - TCPReceiver: serverName = DAN02
[12/8/05 14:59:25.777] ZENInv - TCPReceiver: serviceDN =
CN=DAN02_ZenInvService.OU=DAN.O=CHISHOLM
[12/8/05 14:59:25.777] ZENInv - TCPReceiver: treeName = CIT
[12/8/05 14:59:25.778] ZENInv - TCPReceiver: hasDB = true
[12/8/05 14:59:25.971] Service Manager: start(ServiceDataAccessor,
String[]) not found in
'com.novell.zenworks.common.inventory.dictionaryup date.provider.DictProvider'
[12/8/05 14:59:26.005] ZENInv - TCPReceiver: Receiver Started without
CLUSTER
[12/8/05 14:59:26.006] ZENInv - TCPReceiver: Receiver Binds to Port
Number : 65432
[12/8/05 14:59:26.073] ZENInv - IFS Server: zenInvDictProvider:
FileServiceController: Startup Properties: {chunksize=4096,
transfers=100, rootdirectory=SYS:\ZENworks\Inv\server\DictDir,
timeout=60000, servicename=zenInvDictProvider, portnumber=0}
[12/8/05 14:59:26.183] Service Manager: start(ServiceDataAccessor,
String[]) not found in
'com.novell.zenworks.common.inventory.dictionaryup date.consumer.DictConsumer'
[12/8/05 14:59:28.918] ZENInv - Dictionary Consumer:
DictConsumerUtility::getUpdatePolicyDN: getDictionaryUpdatePolicy
returned attribs.returnValue = 0
[12/8/05 14:59:28.919] ZENInv - Dictionary Consumer:
DictConsumerService::DictDownloadThread::run:
UpdatePolicyNotFoundException.
com.novell.zenworks.common.inventory.dictionaryupd ate.consumer.UpdatePolicyNotFoundException
at
com.novell.zenworks.common.inventory.dictionaryupd ate.consumer.DictConsumerUtility.getUpdatePolicyDN (DictConsumerUtility.java:237)
at
com.novell.zenworks.common.inventory.dictionaryupd ate.consumer.DictConsumerService$DictDownloadThrea d.setUpdatePolicyAttribs(DictConsumerService.java: 688)
at
com.novell.zenworks.common.inventory.dictionaryupd ate.consumer.DictConsumerService$DictDownloadThrea d.getFileClientProperties(DictConsumerService.java :616)
at
com.novell.zenworks.common.inventory.dictionaryupd ate.consumer.DictConsumerService$DictDownloadThrea d.transferFiles(DictConsumerService.java:429)
at
com.novell.zenworks.common.inventory.dictionaryupd ate.consumer.DictConsumerService$DictDownloadThrea d.run(DictConsumerService.java:211)
[12/8/05 14:59:28.921] ZENInv - Status Reporting: Messages are written
into XML file for DN=CN=DAN02_ZenInvService.OU=DAN.O=CHISHOLM
[12/8/05 14:59:28.953] ZENInv - Status Reporting: Number of records to
add are: 1 for DN=CN=DAN02_ZenInvService.OU=DAN.O=CHISHOLM
[12/8/05 14:59:28.986] ZENInv - Status Reporting: Adding record 0 for
DN=CN=DAN02_ZenInvService.OU=DAN.O=CHISHOLM
[12/8/05 14:59:29.326] ZENInv - Status Reporting: Number of modified
records are: 0 for DN=CN=DAN02_ZenInvService.OU=DAN.O=CHISHOLM
[12/8/05 14:59:29.326] ZENInv - Dictionary Consumer:
DictConsumerService::FileDownloadListener::downloa dFailed.
[12/8/05 14:59:59.680] ZenInv - Upgrade Service: Starting Schema
Migration
[12/8/05 14:59:59.751] ZenInv - Upgrade Service: mw_dba->alter
tablespace cim3 default storage (maxextents unlimited) is being
executed
[12/8/05 14:59:59.752] ZenInv - Upgrade Service: Could not do the
operation. details:ORA-25143: default storage clause is not compatible
with allocation policy
ErrorCode:25143
[12/8/05 14:59:59.752] ZenInv - Upgrade Service: Totaltime taken for
Schema Migration : 38
[12/8/05 14:59:59.851] ZENInv - Storer: cim.isClosed =true
[12/8/05 14:59:59.937] ZENInv - Status Reporting: Messages are written
into XML file for DN=CN=DAN02_ZenInvService.OU=DAN.O=CHISHOLM
[12/8/05 14:59:59.970] ZENInv - Status Reporting: Number of records to
add are: 1 for DN=CN=DAN02_ZenInvService.OU=DAN.O=CHISHOLM
[12/8/05 15:00:00.133] ZENInv - Status Reporting: Adding record 0 for
DN=CN=DAN02_ZenInvService.OU=DAN.O=CHISHOLM
[12/8/05 15:00:00.277] ZENInv - Status Reporting: Number of modified
records are: 0 for DN=CN=DAN02_ZenInvService.OU=DAN.O=CHISHOLM
[12/8/05 15:00:00.719] ZenInv - Upgrade Service: migrateDbToMidas(true)
failed in AlterProcedure
[12/8/05 15:00:00.728] ZENInv - Status Reporting: Messages are written
into XML file for DN=CN=DAN02_ZenInvService.OU=DAN.O=CHISHOLM
[12/8/05 15:00:00.761] ZENInv - Status Reporting: Number of records to
add are: 1 for DN=CN=DAN02_ZenInvService.OU=DAN.O=CHISHOLM
[12/8/05 15:00:00.795] ZENInv - Status Reporting: Adding record 0 for
DN=CN=DAN02_ZenInvService.OU=DAN.O=CHISHOLM
[12/8/05 15:00:00.964] ZENInv - Status Reporting: Number of modified
records are: 0 for DN=CN=DAN02_ZenInvService.OU=DAN.O=CHISHOLM
[12/8/05 15:00:00.966] ZenInv - Upgrade Service: Upgrade database to
ZENworks 6.5 failed. Reinstall ZENworks 6.5 and start the inventory
server again
[12/8/05 15:00:00.967] ZENInv - Status Reporting: Messages are written
into XML file for DN=CN=DAN02_ZenInvService.OU=DAN.O=CHISHOLM
[12/8/05 15:00:01.000] ZENInv - Status Reporting: Number of records to
add are: 1 for DN=CN=DAN02_ZenInvService.OU=DAN.O=CHISHOLM
[12/8/05 15:00:01.038] ZENInv - Status Reporting: Adding record 0 for
DN=CN=DAN02_ZenInvService.OU=DAN.O=CHISHOLM
[12/8/05 15:00:01.188] ZENInv - Status Reporting: Number of modified
records are: 0 for DN=CN=DAN02_ZenInvService.OU=DAN.O=CHISHOLM
[12/8/05 15:00:01.237] ZenInv - Upgrade Service: [EnumModifier]
modifyEnumTables, Running EnumModifier in integrated mode with
upgradeService
[12/8/05 15:00:01.237] ZenInv - Upgrade Service: [EnumModifier]
modifyEnumTables, dbDriver:oracle.jdbc.driver.OracleDriver
[12/8/05 15:00:01.237] ZenInv - Upgrade Service: [EnumModifier]
modifyEnumTables,
dbURL:jdbc:oracle:thin:@ora01a.chisholm.vic.edu.au :1522:dw
[12/8/05 15:00:01.239] ZenInv - Upgrade Service: [EnumModifier]
modifyEnumTables, dbType:1
[12/8/05 15:00:01.239] ZenInv - Upgrade Service: [EnumModifier]
modifyEnumTables, dbUser:MW_DBA
[12/8/05 15:00:01.239] ZenInv - Upgrade Service: [EnumModifier]
modifyEnumTables, dbPasswd:novell
[12/8/05 15:00:01.248] ZenInv - Upgrade Service: [EnumModifier] Product
Version: ZFD 4
[12/8/05 15:00:01.298] ZenInv - Upgrade Service: [EnumModifier]
checkConditions(), Executing check 'Statements':5
[12/8/05 15:00:01.298] ZenInv - Upgrade Service: [EnumModifier]
DatabaseEnumsModifier::checkResult(), query: insert into
cim.upgrademethod_en_US Values (13, 'Socket 423')
[12/8/05 15:00:01.311] ZenInv - Upgrade Service: [EnumModifier]
checkResult, errorcode:1
[12/8/05 15:00:01.311] ZenInv - Upgrade Service: [EnumModifier]
checkResult, Non-fatal error:1
[12/8/05 15:00:01.312] ZenInv - Upgrade Service: [EnumModifier]
DatabaseEnumsModifier::checkResult(), query: insert into
cim.upgrademethod_en_US Values (14, 'Socket A (Socket 462)')
[12/8/05 15:00:01.316] ZenInv - Upgrade Service: [EnumModifier]
checkResult, errorcode:1
[12/8/05 15:00:01.316] ZenInv - Upgrade Service: [EnumModifier]
checkResult, Non-fatal error:1
[12/8/05 15:00:01.317] ZenInv - Upgrade Service: [EnumModifier]
DatabaseEnumsModifier::checkResult(), query: insert into
cim.upgrademethod_en_US Values (15, 'Socket 478')
[12/8/05 15:00:01.321] ZenInv - Upgrade Service: [EnumModifier]
checkResult, errorcode:1
[12/8/05 15:00:01.322] ZenInv - Upgrade Service: [EnumModifier]
checkResult, Non-fatal error:1
[12/8/05 15:00:01.322] ZenInv - Upgrade Service: [EnumModifier] Daok putting inv into "ALL" debug mode, it told me it was running
init_sl_0.sql
I found this file contained in migrate.zip under the wminv\properties
directory.
So I extracted the migrate.zip file, edited init_sl_0.sql and removed
the alter tablespace lines. Why they're wanting to do alter tablespace
I have no idea - applications shouldn't expect to be able to do that...
it's up to the organisation and the DBA to manage the tablespaces, not
the application.
I then re-zipped all the files using Winzip and named the file
migrate.zip and placed it in the properties directory.
Now, when the upgrade runs I get a java exception when it tries to
unzip migrate.zip and the upgrade bombs.
I also tried just opening the migrate.zip file with Winzip and directly
editing the file from within Winzip, which does allow for this. However
it appears the files inside the archive are flagged read-only, so
Winzip can't rewrite the edited file back into the same folder location
within the archive.
Here's the java exception:
***12/21/05 16:24:40.789] ZenInv - Upgrade Service: Unzipping the file
migrate.zip
[12/21/05 16:24:40.827] ZenInv - Upgrade Service:
[12/21/05 16:24:40.827] ZenInv - Upgrade Service: Exception while
unzipping the migration zip file
java.lang.NullPointerException
at
com.novell.zenworks.desktop.inventory.upgradeServi ce.MigUnzip.unZipFile(AlterProcedure.java:4557)
at
com.novell.zenworks.desktop.inventory.upgradeServi ce.MigUnzip.unzip(AlterProcedure.java:4522)
at
com.novell.zenworks.desktop.inventory.upgradeServi ce.AlterProcedure.unzipMigrateZipFile(AlterProcedu re.java:1983)
at
com.novell.zenworks.desktop.inventory.upgradeServi ce.AlterProcedure.unzipMigrateZipFile(AlterProcedu re.java:1975)
at
com.novell.zenworks.desktop.inventory.upgradeServi ce.UpgradeServiceController.aInitMigration(Upgrade ServiceController.java:218)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Nativ e Method)
at
sun.reflect.NativeMethodAccessorImpl.invoke(Native MethodAccessorImpl.java:39)
at
sun.reflect.DelegatingMethodAccessorImpl.invoke(De legatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at
com.novell.zenworks.desktop.inventory.senderreceiv er.statemachine.StateMachine.execute(StateMachine. java:68)
at
com.novell.zenworks.desktop.inventory.upgradeServi ce.UpgradeServiceController.init(UpgradeServiceCon troller.java:113)
at
com.novell.zenworks.desktop.inventory.upgradeServi ce.UpgradeServiceThread.run(UpgradeServiceThread.j ava:81)
[12/21/05 16:24:40.828] ZenInv - Upgrade Service: unzipMigrateZipFile()
failed in AlterProcedure
[12/21/05 16:24:40.829] ZenInv - Upgrade Service: in aLogError() method
[12/21/05 16:24:40.830] ZenInv - Upgrade Service: Upgrade database to
ZENworks 6.5 failed. Reinstall ZENworks 6.5 and start the inventory
server again
Ok.. what am I doing wrong ? :) It shouldn't be this hard....
cheers
Dave -
Does anyone know the differences between the Zen 6gb and the Zen Mx 6GB which is the better player?
The MX, as I understand it, is a trimmed-down version of the Zen in terms of codec support, so that it can be offered at a lower price.
For videos it only supports Creative's own CMV codec, but I'm not sure if the MX also has less audio codecs.
Also the MX has a problem with SDcard integration; it rebuilds of the contents of the SDcard everytime you switch the player on, which many people who use the MX in conjunction with an SDcard find annoying.
So basically if you just want a simple musicplayer you can go for the cheaper MX. -
Zen V / Zen V Plus headphone jack prob
I want to get one of these but first I want to know if this new player has the headphone jack problem seen on previous Zen players.
Any troubles so far?
nmIts been out a while, and no problems yet. The only models that have a headphone jack problem are the old (G: with the "back" for the back button) zen micros. No other player have had serious problems since.
Enjoy your player when you get it! -
What would you choose: Zen or Zen Tou
Which is better and why?
The Zen 20GB Mp3 player, or the Zen Touch 20GB with remote control?
The Zen is a later model, and a little more expensi've too. But is the firmware (the software of the mp3 player) of the Zen the same as the Zen touch, or is it better? And what does it offer that the Zen Touch doesn't?
Hmm..It's really down to you which you prefer. I think the Zen 20Gb is a little smaller at least in plan, although a touch thicker.
The Zen 20 Gb has one or two extra functions, but the Zen Touch has MTP firmware (that allows access to subscription music). -
Zen MicroPhoto & Zen V Plus-Softwar
Hello I have a Zen MicroPhoto and have the software installed on my PC. I just purchased a Zen V Plus for my wife. Do I have to install the Zen V Plus software as well or will it work with the Zen MicroPhoto software?Great products and I highly recommend these to anyone.
Hello I have a Zen MicroPhoto and have the software installed on my PC. I just purchased a Zen V Plus for my wife. Do I have to install the Zen V Plus software as well or will it work with the Zen MicroPhoto software?Great products and I highly recommend these to anyone.
-
Any way to change the ZEN (not Zen) background images to my o
title says it all. the player has six choices, it would be nice to know how to change them to my own pictures if that is possible.
Upload your pictures to your ZEN, find the picture you want to use as background in the Photos menu, hit the menu button (top right)?while that picture is displayed on the screen, then scroll down the options until you see 'Set as Wallpaper' and make that selection. That's all there is to it.
Maybe you are looking for
-
NULL partition key in RANGE partition
All, This is regarding partitioning a table using RANGE partition method. But the partition key contains null. How do I handle this situation? This is because there is no DEFAULT partition in RANGE partition though its present in LIST partition. Will
-
Wifi printer (Brother DCP-J315W) not working after Yosemite 10.10.1
We have a wifi printer with an ethernet cable to a Technicolor TG582n router. My husband's pc (Win 7) is able to print wirelessly. I was able to print from my Mac (OS X 10.10.1), although sometimes I had to turn the printer off and on again. I was
-
My iBook won't boot it gets as far as the apple logo with the spinning wheel. It'll be like that for about four minutes then it'll restart and repeat its self. I've tried the safe mode but no luck and I do not have the original disc installers. Im ru
-
hi! I wondered if someone could help me, we are required to do this as part of an excercise for a course but I havn't got a clue where to start. The task is to: Write a program that calculates how much tax someone should pay according to the followin
-
Cannot publish project in project 2010
I am trying to publish project plan to project server cannot do it.The option is grayed out. Any suggestions why?