Zen Reporting Server Issues

Hi All
I need some help with ZRS, this is the first time I've tried it on 2003 sp2 x86 as I'm trying to write install instructions for an on site tech. My primarys are both on vmware and when ZRS failed the first time I upgraded to 10.3.3 and on the secondary server I applied the report-framework.jar, just in case. I got the ZRS install failed after restarting the services, the debug log, says try the configure -c installboe, I tried that and got nothing, it's said press enter to accept default stuff, press enter, immediately back to command line. Installboe.log has nothing. I read the docs about configuring the reports services, go to Programs/Zen Reporting Server and it's empty, this is the 4th time it's like this. Primaries are communicating, login is good during setup, memory is good, no errors during gui pre req check. Netstat shows the 6400 port not allocated or any 64xx ports. I downloaded a new ZRS win iso.
Normally I would run sles, but the site is using 2008 r2 for primaries and want a 2003 for ZRS as that's supported, they want it running as they've paid for asset management and don't know when they can upgrade to 11sp1a.Any help you can give, would be great, as it's getting more than a little tedious and I'm chasing my own tail with the web searches, every different error I come across I search on and nothing distinct to this. Even if I could find something on way the start menu, zrs is empty would be a start.
Cheers
Jon

JonH67,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/

Similar Messages

Oracle Report Server Issue with Japanese Characters

We are trying to setup a Oracle Report Server to print the Japanese characters in the PDF format.
We have separate Oracle Report servers for printing English, Chinese and Vietnamese characters in PDF formats using Oracle Reports in the production which are running properly with Unix AIX version 5.3. Now we have a requirement to print the Japanese characters. Hence we tried to setup the new server for the same and the configurations are done as same as Chinese/Vietnamese report servers. But we are not able to print the Japanese characters.
I am providing the details which we followed to configure this new server.
1.     We have modified the reports.sh to map the proper NLS_LANG (JAPANESE_AMERICA.UTF8) and other Admin folder settings.
2.     We have configured the new report server via OPMN admin.
3.     We have copied the arialuni.ttf to Printers folder and we have converted this same .ttf file in AFM format. This AFM file has been copied to $ORACLE_HOME/guicommon/gk/JP_Admin/AFM folder.
4.     We have modified the uifont.ali (JP_admin folder) file for font subsetting.
5.     We have put an entry in JP_admin/PPD/datap462.ppd as *Font ArialUnicodeMS: Standard "(Version 1.01)" Standard ROM
6.     We have modified the Tk2Motif.rgb (JP_admin folder) file for character set mapping (Tk2Motif*fontMapCs: iso8859-1=UTF8) as we have enabled this one for other report servers as well.
Environment Details:-
Unix AIX version : 5300-07-05-0831
Oracle Version : 10.1.0.4.2
NLS_LANG : JAPANESE_AMERICA.UTF8
Font Mapping : Font Sub Setting in uifont.ali
Font Used for Printing : arialuni.ttf (Font Name : Arial Unicode MS)
The error thrown in the rwEng trace (rwEng-0.trc) file is as below
[2011/9/7 8:11:4:488] Error 50103 (C Engine): 20:11:04 ERR REP-3000: Internal error starting Oracle Toolkit.
The error thrown when trying to execute the reports is…
REP-0177: Error while running in remote server
Engine rwEng-0 crashed, job Id: 67
Our investigations and findings…
1.     We disabled the entry Tk2Motif*fontMapCs: iso8859-1=UTF8 in Tk2Motif.rgb then started the server. We found that no error is thrown in the rwEng trace file and we are able to print the report also in PDF format… (Please see the attached japarial.pdf for your verification) but we are able to see only junk characters. We verified the document settings in the PDF file for ensuring the font sub set. We are able to see the font sub setting is used.
2.     If we enable the above entry then the rwEng trace throwing the above error (oracle toolkit error) and reports engine is crashed.
It will be a great help from you if you can assist us to resolve this issue…

Maybe 7zip or another tool has workarounds for broken file names, you could try that.
Or you could try to go over the files in the zip archive one-by-one and write it to files out-1, out-2, ..., out-$n without concerning yourself with the file names. You could get file endings back via the mimetype.
This script might work:
#include <stdio.h>
#include <zip.h>
static const char *template = "./out-%04d.bin";
int main(int argc, char**argv)
int err = 0;
zip_t *arc = zip_open((const char*)argv[1], ZIP_RDONLY, &err);
if(arc == NULL)
printf("Failed to open ZIP, error %d\n", err);
return -1;
zip_int64_t n = zip_get_num_entries(arc, 0);
printf("%s: # of packed files: %d\n", argv[1], n);
for(int i = 0; i < n; i++)
zip_stat_t stat;
zip_stat_index(arc, i, ZIP_FL_UNCHANGED, &stat);
char buf[stat.size];
char oname[sizeof(template)];
zip_file_t *f = zip_fopen_index(arc, (zip_int64_t)i, ZIP_FL_UNCHANGED);
zip_fread(f, (void*)&buf[0], stat.size);
snprintf(&oname[0], sizeof(template), template, i);
FILE *of = fopen(oname, "wb");
fwrite(&buf[0], stat.size, 1, of);
printf("%s: %s => %lu bytes\n", argv[1], oname, stat.size);
zip_fclose(f);
fclose(of);
zip_close(arc);
return 0;
Compile with
gcc -std=gnu99 -O3 -o unzip unzip.c -lzip
and run as
./unzip $funnyzipfile
You should get template-named, numbered output files in the current directory.
Last edited by 2ion (2015-05-21 23:09:29)

Custom Reports Server Issue (upgrading 10g to Weblogic 11g)

I am having an issue with "Anonymous' user showing up when I go into the console of the Weblogic server to see all the report requests. In 10g (which we are upgrading from), I have report requests that I do a Preview from within Oracle Forms. When I do the RUN_REPORT_OBJECT/SHOW.WEB_DOCUMENT, it captures the User account and put it in the console with that username. On 11.1.1.4, using same form/report, it doesn't capture the username. If I call the reports server from the database, it does work fine.
Anyone have any ideas if there's something I have to do in Oracle Forms to put that username in or if it's a setting on the Custom Reports Server that i need to set so that it captures the name from the Oracle Forms session.

Hi A. Drieux,
Thanks for the reply. i have some questions on ODI.
Now we are using hyperion 11.1.1.3 with ODI 10.1.3. We are upgrading hyperion version 11.1.1.3 to 11.1.2.2.
Is it possible, to use the same ODI 10.1.3 version to upgrade version(hyperion 11.1.2.2) also?
Reply would be appreciated.
Thanks,
mady

10g(10.1.2.0.2) rwserver(Report Server) Issue

Dear All
We have Installed oracle 10g(Forms [32 Bit] Version 10.1.2.0.2 (Production) and running the same on file server mode. we have created a report server(rwserver server=test)
on the server which is used by other users for running the reports on their machine .
We are currently facing a problem that report server hangs and user gets that response "UNABLE TO RUN REPORT". when we close and restart the report server
then reports works fine. But this happens not very frequently (one/twice) in a day. Sometimes the report server continues running two three days without any problem.
Please suggest what can be the proper solution.
Thanks
Manoj Rajput

1.) Bring your Forms installation at least to the latest patchlevel 10.1.2.3 (plus the latest bundle patches for forms and reports)
2.) if this doesn't help you might want to post to the correct forum: Reports
cheers

Crystal Report Server issues

Hi,
1) Where to find for documentation for Crystal report server XI installation on server machine.
2) which approach to follow for reports to support 20 concurrent users creating/updating reports
and also to support over 100 users viewing/generating reports from VB.Net front end?
such as crystal report viewer model, report document model, info view model, crystal RAS. We will have Crystal Report Server XI, SQLserver 2005. These reports are yet to be developed.
3) And also allow users to approve reports before general distribution and ability to automate report generation and deliver reports via email from VB.Net front end?
I have worked on Crystal designer as well as on integrating report Visual Basic. I am new to above requirements.Any ideas greatly appreciated.

1) Where to find for documentation for Crystal report server XI installation on server machine.
See "setting up the development environment" here:
https://boc.sdn.sap.com/node/10619
You have to follow same instructions when setting up a production environment as far as the runtime is concerned.
2) which approach to follow for reports to support 20 concurrent users creating/updating reports
and also to support over 100 users viewing/generating reports from VB.Net front end?
such as crystal report viewer model, report document model, info view model, crystal RAS. We will have Crystal Report Server XI, SQLserver 2005. These reports are yet to be developed.
See the following resources:
https://boc.sdn.sap.com/node/972
https://websmp106.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000713358&_SCENARIO=01100035870000000202
3) And also allow users to approve reports before general distribution and ability to automate report generation and deliver reports via email from VB.Net front end?
https://boc.sdn.sap.com/samples/84/1194
https://boc.sdn.sap.com/developer/library
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_boj_erq/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes.do
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/10b840c0-623f-2b10-03b5-9d1913866b32
Ludek

Forms and reports server issue

Hai
iam new to oracle applications.i was asked to solve this issue . i get the error when i start the oracle applications.i get the error in the forms,report and apache webserver.
the file parameter.config could not be located or read.
for that the solution was given in the metalink as
SolutionTo implement the solution, please execute the following steps:
1. stop all APPS-Tier Services
2. execute following script to identify the current value :
select t.PROFILE_OPTION_NAME, t.USER_PROFILE_OPTION_NAME,v.PROFILE_OPTION_VALUE
from FND_PROFILE_OPTIONS p,FND_PROFILE_OPTION_VALUES v,FND_PROFILE_OPTIONS_TL t
where
p.profile_option_id=v.profile_option_id
and p.PROFILE_OPTION_NAME=t.PROFILE_OPTION_NAME
and p.PROFILE_OPTION_NAME like '%DEFAULT_ORG_ID%';
3. Verify the defined values for Organizations via the output 'adutconf.lst', created via the script
$AD_TOP/sql/adutconf.sql
4. Modify the value for the 'DEFAULT_ORG_ID' in tables FND_PROFILE_OPTION_VALUES and FND_PROFILE_OPTIONS_TL with a valid value and commit it.
5. start the APPS-Tier Services
but i donot understand this .i have confusion with the 3rd,4th and 5th steps.so plz explain me these steps in detail to me
Regards
Orauser123

hai hussein
i executed the script adutconf.sql and checked the fie adutconf.lst for the organisation value but i donot find any value like that
i have placed last few lines of the adutconf.lst after executing the script adutconf.sql in $AD_TOP/sql
JL JL jlcrloc 11.5.41 Installed 06-Jan-2000
JL JL jldoloc 11.5.41 Installed 06-Jan-2000
JL JL jlecloc 11.5.41 Installed 06-Jan-2000
JL JL jlgtloc 11.5.41 Installed 06-Jan-2000
JL JL jlhnloc 11.5.41 Installed 06-Jan-2000
JL JL jljmloc 11.5.41 Installed 06-Jan-2000
JL JL jlmxloc 11.5.41 Installed 06-Jan-2000
JL JL jlniloc 11.5.41 Installed 06-Jan-2000
JL JL jlpaloc 11.5.41 Installed 06-Jan-2000
JL JL jlpeloc 11.5.41 Installed 06-Jan-2000
JL JL jlprloc 11.5.41 Installed 06-Jan-2000
JL JL jlpyloc 11.5.41 Installed 06-Jan-2000
JL JL jlsvloc 11.5.41 Installed 06-Jan-2000
JL JL jlttloc 11.5.41 Installed 06-Jan-2000
JL JL jluyloc 11.5.41 Installed 06-Jan-2000
JL JL jlveloc 11.5.41 Installed 06-Jan-2000
52 rows selected.
--> Registered Data Groups
ID Data Group Name Dflt Created By Updated By
-99 Multiple Reporting Currencies No 08-11-1997 1 08-11-1997 1
0 Standard Yes 29-04-1992 1 29-04-1992 1
2 rows selected.
--> Base language and other Installed languages
Type Code NLS Language
Base US AMERICAN
1 row selected.
--> NLS Settings
NLS_NCHAR_CHARACTERSET: AL16UTF16
NLS_CHARACTERSET......: UTF8
NLS_DATE_FORMAT.......: DD-MON-RR
NLS_NUMERIC_CHARACTERS: .,
NLS_LANGUAGE..........: AMERICAN
NLS_SORT..............: BINARY
--> Replication Package Installed?
Not Installed
--> End of Application Information Gathering
i dont know where to find the defined values for organisations.so please help me to solve this issue.iam confused

Reporting Server Installation Compatibility

Hi,
I've completed the construction of an OES 11 SP1/SLES 11 SP2 server with ZENworks 11 SP2, Updated to 11.2.1/11.2.2 via the manual update method. I'm preparing to install the ZENworks Reporting Server, but I'm hesitant due to the fact that the ZEN Reporting Server 11.2 installation guide tells me that the requirements to install the reporting software stop at SLES 11 SP1 (well, that coupled with the fact that the installation media is named "ZENworks11SP1_Reporting_Lin", which doesn't sound like SP2) .
I've initially launched the installation process via setup.sh, but I'm receiving input/output errors when executing the command. The exact error is: "/media/iso/Install/Disk1/InstData/Linux/VM/install.bin: /media/iso/Install/Disk1/InstData/Linux/VM/install.bin: Input/Output error". I will download the iso again and double check the md5sum to be sure of the integrity of the download.
The most important set of questions I'd like to ask are: (1) Is this version of the reporting software incompatible with the environment I've built? (2) If the answer to (1) is "yes", when will Novell be releasing a compatible version for this environment?
Of course, if anyone has seen the error I mentioned earlier and would like to save me some time downloading another copy, I'd be happy to listen to your experience and potential solution.
Thanks,
Elliott

Originally Posted by ElliottRScott
Hi,
I've completed the construction of an OES 11 SP1/SLES 11 SP2 server with ZENworks 11 SP2, Updated to 11.2.1/11.2.2 via the manual update method. I'm preparing to install the ZENworks Reporting Server, but I'm hesitant due to the fact that the ZEN Reporting Server 11.2 installation guide tells me that the requirements to install the reporting software stop at SLES 11 SP1 (well, that coupled with the fact that the installation media is named "ZENworks11SP1_Reporting_Lin", which doesn't sound like SP2) .
I've initially launched the installation process via setup.sh, but I'm receiving input/output errors when executing the command. The exact error is: "/media/iso/Install/Disk1/InstData/Linux/VM/install.bin: /media/iso/Install/Disk1/InstData/Linux/VM/install.bin: Input/Output error". I will download the iso again and double check the md5sum to be sure of the integrity of the download.
The most important set of questions I'd like to ask are: (1) Is this version of the reporting software incompatible with the environment I've built? (2) If the answer to (1) is "yes", when will Novell be releasing a compatible version for this environment?
Of course, if anyone has seen the error I mentioned earlier and would like to save me some time downloading another copy, I'd be happy to listen to your experience and potential solution.
Thanks,
Elliott
Yes, the SP1 ZRS works with ZCM 11.2. It's kinda dumb with the naming, but that's what you do/use/install.
But I've not tried on an OES11 SP1 server, just on plain SLES11 SP1 at the time.

Crystal Reports 10 Enterprise Server Issue - Exporting Large Reports to PDF

Weu2019re implementing a Crystal Reports 10 Server for a customer but weu2019re having an issue with exporting large reports to PDF. The report size that starts to show this issue is roughly 300 pages with 20 records per page. We use the default Crystal ActiveX viewer.
Basically what happens is that the user will launch the report in the ActiveX viewer and the large report will take a while to load, as much as 3 to 4 minutes. The user may then wish to export to PDF. Once they attempt it with these large reports the viewer will basically hang and possibly be processing but will then time-out after roughly 5 minutes with this error:
u201CProxy Error
The proxy server received an invalid response from an upstream server.
The proxy server could not handle the request POST /thinqreports/THINQCrystalInterface.asp.
Reason: Error reading from remote server
IBM_HTTP_Server/6.1.0.9 Apache/2.0.47 (Unix) Server at lmsproxy.aurora.org Port 443u201D
We believe this error is coming from a server on our network. We have a proxy server between users and the Crystal Server that has a 5 minute time-out for connections. What we want to know is:
- Is there a way to speed up this export to PDF process?
- Should the Crystal Viewer be keeping an http connection alive to the Crystal Report Server while its doing this export process?
- If not, what port does Crystal Viewer use to communicate with the Crystal Report Server?
- Is there something we can set in Crystal to keep an http connection open?
- What is actually occurring during this export process?
Occasionally, we may get the above error when simply launching a report, not just attempting to export to PDF. We presume that is because loading the report into the Crystal Viewer from the Crystal Report Server is taking longer than 5 min.
Anyone have any thoughts? Thanks.
Scott

Scott,
As this is happening within Enteprise (and I am assuming the report does not time out in the Crystal Reports Designer) I would suggest posting this to the BusinessObjects Enterprise Administration
forum.
My limited Enterprise knowledge would be to suggest scheduling the report as PDF but I don't know if that is a viable option for you.

Report Server 2005 Issue

Hi ,
I am getting the following error message when trying to access the Report Server after I configured my reporting services in SharePoint Integrated mode(which gets completed by the way).
An internal error occurred on the report server. See the error log for more details. (rsInternalError) Get Online Help
Could not load file or assembly 'RSSharePointSoapProxy, Version=9.0.242.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91' or one of its dependencies. The system cannot find the file specified. (C:\Inetpub\wwwroot\wss\VirtualDirectories\8080\web.config
line 112)
Could not load file or assembly 'RSSharePointSoapProxy, Version=9.0.242.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91' or one of its dependencies. The system cannot find the file specified.
Any Idea what may be causing this.
Thanks & Regards
Atul LaL

Hi Atul,
Based on my research, this issue can be caused by Reporting Services add-in for SharePoint not installed on the Report Server. If in this scenario, please try to install it.
The Microsoft SQL Server 2005 Reporting Services Add-in provides a set of features that enable you to run a report server. And It is installed through a Setup program that you run at a command prompt on a server that has an instance of the SharePoint product
or technology you want to use.
For more details, please see the following documents:
Installing the Reporting Services Add-in
Requirements for Running Reporting Services in SharePoint Integrated Mode
Hope this helps.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Report server name issue

Dear All,
I am stucking with the following problem,
I have deployed my ERP apllication (developed in oracle forms & reports 10g) on oracle apllication server 10g forms & report services. my apllication server has two LAN card. out of two one has been configured with statis IP for web access. but while running report from parameter form i am taking report url from table. table contain report server name as my local server name.
My problem is,
If i am accessing erp from web using static ip and running report then server name is not recognized
because it is my local server name coming from table. so for that every time i need to change report url & replace server name with statis ip in browser addr for web users.
Please guide me what should i do to resolve this issue.
Your reply would be greatly apprecited.
Thanks

If "Credentials supplied by the user running the report" is selected, when the report is run, the user will be prompted to provide credentials. They would need to provide credentials that have the appropriate permissions (e.g., read, execute) to the
database. This prevents the double hop.
If "Credentials stored securely in the report server" is selected, you have to enter the username and password of a user (or service account) that has the appropriate permissions (e.g., read, execute) to the database. When the report is run, SSRS will use
these stored credentials each time to authenticate to the database engine and query the data. Users running the report are not prompted to provide credentials. With this option you can use an Active Directory or SQL Server account.
In order to access/run the report, a user will need to authenticate to SSRS. There are options here as well. You can provide them the link to the report manager and they can authenticate, navigate to, and run the report. You can also provide
direct links to reports that users click in a document or application. At this point the user is typically still prompted to authenticate to SSRS. You can also programmatically call the report using API's and essentially build a proxy that authenticates
to SSRS and open the report.
Not sure if that answers your question.

Having issues with report server in OEM

I'm having some issues with viewing the UNIX metrics for our reports server in OEM. The metrics are coming up as 0, no error messages. The cpu/memory metrics come up for the HTTP server, and on the instance page.
I'm also not able to stop/start the reports server via OEM. It's greyed out on the oem instance page.
This is occurring only on one machine...I have another midtier box and have no issues viewing metrics/start/stopping report server.
Anyone have any ideas?
Thanks,
Melissa Wilcox

Hi Thomas,
Thanks for your post.
I 'd like to suggest you can try to sing out and re-sign in the Azure server explore.
1.right click the Azure node on server explore.
2.Select "Connect to with Microsoft Azure " and then login using your account.
3.Make sure your select the right subscription.
4.If storage list didn't include your account, you could right-click the storage node, and select Attach External Storage.
Another approach is that you can re-install the
Azure tool.
Regards,
Will
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Having issues with starting Reports Server on RHEL5 after installation

Hi, I installed Oracle Application Server 10.1.2 on RHEL, ran the patches to move it up to 10.1.2.3. I've also put a couple patches in addition.
When I go to my application server console, I noticed everything is started up but my Reports Server. I've tried to manually start it via the browser, and it tells me it starts up. But when I go back to the main page of the application server console, it shows still as down. I've tried to log onto the server and issue a statement to start the reports server. However, it still will not start.
I followed the steps made in Metalink Document 564174.1 and did everything that was asked.
Anybody got any ideas on what might be causing this?
The only error (warning message) I received during any part of the installation process was the OPMN Process Manager didn't start. I went ahead and continued (not sure if that's my problem). But that was the only issue. And like I say, the forms server seems to work fine. No issues. I've set up my application and I can call all the forms in my application. It works.
Regards,
Chris

One thing is that the status in EM console is showed ad Stoped and indeed it's stoped and other is that the EM is not able to see if the process is up. Lots of times I had problems like this where the Reports Server is showed as down but the proc exist and the service is attending request.
Have you try to test report server running a sample report?
Have you check is exist a proces for the report server?
Have you use the rwdiag.sh -findall to see if the process exists?
Hope this helps
Greetings.

Issues in exporting SSRS report to PDF format in Report Server - Blank spaces are deleted

Hi Gurus,
I have a problem in exporting SSRS report to PDF format. It deletes all the blank spaces when I use bullet in a Text box and try to export to PDF formt in Report Server . For example
• Project submitted to the TRC
Result in PDF format:
• ProjectsubmittedtotheTRC
I also noted that when I try to export to PDF in Visual Stuio 2005 (Business Intelligence development studio), it does not delete any blank spaces and shows the correct aligned Data in PDF format.
Please help me as it is frustrating a lot
I would highly appreciate for your quick response

Was there ever a solution found for this as i have the same issue.
When bullet point is entered in a field all the spaces are removed when exported to PDF
i tried exporting to excel and it does not remove spaces, however this is no use to me as it needs to be in PDF
Using IE 7 (Don't think the browser has anything to do with it as this happened via a subscription)
Didn't know SSRS had specific Service Packs, i though they came as patches to SQL Server (SQL Server is on Service Pack 3)
This should be easy to replicate all you need to do is copy text containing a bullet point into a sql server database field and then add this field to a report export to pdf and the spaces are gone
Thanks in advance,
Mark Brunton
brunzire

Reporting Services will not automatically use a different replica for the report server databases when a failover occurs. How to overcome this issue

Reporting Services offers limited support for using AlwaysOn Availability Groups with report server databases. The report server databases can be configured in AG to be part of a replica; however Reporting Services will not automatically use a different
replica for the report server databases when a failover occurs. How to overcome this issue? is there any workaround for that..
Rahul

Hi.
With the AlwaysOn listener you should have a single DNS name to connect to regardless of which cluster node is active. Are you using the listener service? If not, please refer to the link below.
http://msdn.microsoft.com/en-us/library/hh213417.aspx#AGlisteners

Issues while migration reports to 2012 report server .

I am stuck in report server related issue . Following are steps and log files details for migrating report server database from 2005 to 2012 :-
Back up the encryption key for the report server database.
Back up the report server database a SQL Server database.
Back up the report server configuration files.
Restore the database from the backup created , As temporary database and the main database are depend so they should be restored together.
Start the Reporting Services Configuration tool and connect to the Reporting Services instance you just installed.
Configure URLs for the report server and Report Manager
Configure the report server database, selecting the existing report server database from your previous installation. After successful configuration, the report server services
will restart, and once a connection is made to the report server database, the database will be automatically upgraded to SQL Server 2012 Reporting Services.
As we were not able to figure out the password I tried another approach to test if the
report server works after deleting the encrypted data . I deleted encrypted data.
Error below is shown in log files when I try to access report manager .
Log Files Details:-
at Microsoft.ReportingServices.UI.FolderItems.LoadItems()
   at Microsoft.ReportingServices.UI.SortableItems.Control_Init(Object sender, EventArgs args)
   at System.EventHandler.Invoke(Object sender, EventArgs e)
   at System.Web.UI.Control.OnInit(EventArgs e)
   at System.Web.UI.Control.InitRecursive(Control namingContainer)
   at System.Web.UI.Control.InitRecursive(Control namingContainer)
   at System.Web.UI.Control.InitRecursive(Control namingContainer)
   at System.Web.UI.Control.InitRecursive(Control namingContainer)
   at System.Web.UI.Control.AddedControl(Control control, Int32 index)
   at Microsoft.ReportingServices.UI.FolderContentsPageCtrl.Control_Init(Object sender, EventArgs args)
   at System.EventHandler.Invoke(Object sender, EventArgs e)
   at System.Web.UI.Control.OnInit(EventArgs e)
   at System.Web.UI.Control.InitRecursive(Control namingContainer)
   at System.Web.UI.Control.InitRecursive(Control namingContainer)
   at System.Web.UI.Control.InitRecursive(Control namingContainer)
   at System.Web.UI.Control.InitRecursive(Control namingContainer)
   at System.Web.UI.Control.InitRecursive(Control namingContainer)
   at System.Web.UI.Control.InitRecursive(Control namingContainer)
   at System.Web.UI.Control.InitRecursive(Control namingContainer)
   at System.Web.UI.Control.InitRecursive(Control namingContainer)
   at System.Web.UI.Control.AddedControl(Control control, Int32 index)
   at Microsoft.ReportingServices.UI.SharedArea.Control_Init(Object sender, EventArgs args)
   at System.EventHandler.Invoke(Object sender, EventArgs e)
   at System.Web.UI.Control.OnInit(EventArgs e)
   at System.Web.UI.Control.InitRecursive(Control namingContainer)
   at System.Web.UI.Control.AddedControl(Control control, Int32 index)
   at Microsoft.ReportingServices.UI.FolderPage.Page_Init(Object sender, EventArgs e)
   at System.EventHandler.Invoke(Object sender, EventArgs e)
   at System.Web.UI.Control.OnInit(EventArgs e)
   at System.Web.UI.Page.OnInit(EventArgs e)
   at System.Web.UI.Control.InitRecursive(Control namingContainer)
   at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
ui!ReportManager_0-1!1e18!07/30/2012-05:17:31:: e ERROR: HTTP status code --> 200
-------Details--------
System.Web.Services.Protocols.SoapException: System.Web.Services.Protocols.SoapException: An internal error occurred on the report server. See the error log for more details. ---> Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException:
An internal error occurred on the report server. See the error log for more details.
   at Microsoft.ReportingServices.Library.ReportingService2005Impl.ListChildren(String Item, Boolean Recursive, CatalogItemList& CatalogItems)
   at Microsoft.ReportingServices.WebServer.ReportingService2010.ListChildren(String ItemPath, Boolean Recursive, CatalogItem[]& CatalogItems)
   at Microsoft.ReportingServices.UI.FolderItems.LoadItems()
   at Microsoft.ReportingServices.UI.SortableItems.Control_Init(Object sender, EventArgs args)
   at System.EventHandler.Invoke(Object sender, EventArgs e)
   at System.Web.UI.Control.OnInit(EventArgs e)
   at System.Web.UI.Control.InitRecursive(Control namingContainer)
   at System.Web.UI.Control.InitRecursive(Control namingContainer)
   at System.Web.UI.Control.InitRecursive(Control namingContainer)
   at System.Web.UI.Control.InitRecursive(Control namingContainer)
   at System.Web.UI.Control.AddedControl(Control control, Int32 index)
   at Microsoft.ReportingServices.UI.FolderContentsPageCtrl.Control_Init(Object sender, EventArgs args)
   at System.EventHandler.Invoke(Object sender, EventArgs e)
   at System.Web.UI.Control.OnInit(EventArgs e)
   at System.Web.UI.Control.InitRecursive(Control namingContainer)
   at System.Web.UI.Control.InitRecursive(Control namingContainer)
   at System.Web.UI.Control.InitRecursive(Control namingContainer)
   at System.Web.UI.Control.InitRecursive(Control namingContainer)
   at System.Web.UI.Control.InitRecursive(Control namingContainer)
   at System.Web.UI.Control.InitRecursive(Control namingContainer)
   at System.Web.UI.Control.InitRecursive(Control namingContainer)
   at System.Web.UI.Control.InitRecursive(Control namingContainer)
   at System.Web.UI.Control.AddedControl(Control control, Int32 index)
   at Microsoft.ReportingServices.UI.SharedArea.Control_Init(Object sender, EventArgs args)
   at System.EventHandler.Invoke(Object sender, EventArgs e)
   at System.Web.UI.Control.OnInit(EventArgs e)
   at System.Web.UI.Control.InitRecursive(Control namingContainer)
   at System.Web.UI.Control.AddedControl(Control control, Int32 index)
   at Microsoft.ReportingServices.UI.FolderPage.Page_Init(Object sender, EventArgs e)
   at System.EventHandler.Invoke(Object sender, EventArgs e)
   at System.Web.UI.Control.OnInit(EventArgs e)
   at System.Web.UI.Page.OnInit(EventArgs e)
   at System.Web.UI.Control.InitRecursive(Control namingContainer)
   at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
library!ReportServer_0-2!160c!07/30/2012-05:17:31:: i INFO: Call to GetSystemPropertiesAction().
ui!ReportManager_0-1!1e18!07/30/2012-05:17:32:: e ERROR: System.Threading.ThreadAbortException: Thread was being aborted.
   at System.Threading.Thread.AbortInternal()
   at System.Threading.Thread.Abort(Object stateInfo)
   at System.Web.HttpResponse.End()
   at Microsoft.ReportingServices.UI.ReportingPage.ShowErrorPage(String errMsg)

Hello Manish,
I am sorry for my delay.
As we know, the service pack of SQL Server is free to download and install, and the latest SP for SQL server 2005 is SP4, so that Microsoft recommend that we migrate the service from SQL Server 2005 SP4 to SQL Server 2012. If you still want to upgrade the
service from SSRS 2005 SP3, we cannot guarantee that all features can work properly, and we did not test it yet. Therefore, I still recommend you upgrade the SQL server 2005 to SP4 if possible.
In addition, you can refer to the following article on MSDN to see whether it can meet your requirement. It is a general step to migrate the SSRS.
http://msdn.microsoft.com/en-us/library/ms143747.aspx
I hope it is helpful to you.
Regards,
Edward
Edward Zhu
TechNet Community Support

Zen Reporting Server Issues

Similar Messages

Maybe you are looking for