Zen Sleek and Windows 2

I got the Zen Sleek on Amazon.com for myself for Christmas (firmware 2.00.06). I thought it would work with Windows 2000, as the requirements on the Creative website (and the box) said. So after figuring out that the Zen only ships in the US with the XP software, my friend got me a Zen installation disk from Creative customer service in the UK. So I tried to install this on my machine, but the installation will freeze at 99% when it says it's installing the windows drivers. If I put the disk back in again and run the installation, it says that everything has installed. When I plug in the player, Windows detects a new device, and does the Find Drivers wizard. So I point it to the Creative folder installed on my computer, the folder that is "jukebox 3 drivers." This doesn't work (It says no driver is found). I've tried uninstalling and then only re-installing the three drivers that are on the Creative disk (not letting the cd auto-play, going to the "drivers" folder, then "english", then running the three drivers...drv_jb.exe, drv_jb3.exe, drv_nm2.exe). The only problem that I can think of is that I plugged it into my roommate's computer that is running XP and now it has been somehow set to run on XP only. If I format the player will this erase the setting and allow me to install on my Windows 2000? Or am I out of luck since I my firmware is 2.00.06? Anyhelp would be greatly appreciated.

You're mostly out of luck. Most versions of the Sleek that shipped were for XP only, although some early models shipped with a v.xx PDE firmware that would work with other versions of Windows.
There is also an "Easy CD" which ships with some players to allow them to work on earlier versions of Windows, although you can only use Windows Media Player 9 to transfer.
I suggest getting in touch with Creative Support to see if you can either get the PDE firmware, or this Easy CD.

Similar Messages

  • Windows operating system error with a Zen Sleek and windows 2

    I have tried to install the creative disk that came with the Zen Sleek. After launch I get this message "windows operating system running on this computer is not supported by this product and can get no further. I am running windows 2000 pro. I have downloaded the creative media source program from the creative.com site and it will install beautifully but when you launch it, I get the error " CTCMS.exe has generated errors and will be closed by windows. You will need to restart program." I figure that these two problems are probably related. We have been able to transfer songs by using the play for sure, but I am disappointed otherwise.
    thanks, Kathy

    On the packaging it should say the player is Win XP only. I'm not sure if the Sleek ships with the Easy CD that allows MTP/PlayForSure based players to work with earlier Windows versions.

  • Zen Sleek and battery charg

    I just purchased a Zen Sleek and I am currently charging it. The manual says it will take approx. 2 hrs. to charge, but it is running on 4 hrs.
    It zipped past bars one, two and three. It is currently still showing as charging on the third bar, and has been like this again for 4 hrs.
    How long does it take to complete, I'm hoping I don't have another bad Creative product on my hands.

    It looks like I got my second defecti've Creative product in 5 months. FIrst, my Micro goes back for a refund because of the headphone jack, now the Sleek has an issue with the battery not fully charging. I read their knowledgebase, but I have found posts regarding others who have had to return their Sleek because of this defect.
    Well, I will get a refund, and will NEVER touch Creative again, I have a Rio (which works great 00% of the time). Since they're gone, I will find a manufacturer who doesn't ship defecti've products at least in my case 00% of the time.
    Go ahead, flame away, I'm not visiting this board anymore, so have fun. I'm not buying an iPod, but Apple doesn't ship crap at the rate this company does.Message Edited by Allen5 on 2-25-2005 2:34 AM

  • Zen Sleek and WMP11!

    Hi,
    I have a zen sleek and have not put any music on it for ages. I updated to WMP ages ago and it works fine with my ZVM. I have tried searching the forums but not getting very far!! It says the driver is outdated and won't let me get any further. I have tried the downloads and installing a new driver but that doesn't seem to help either. I don't want to roll back to wmp 0 cos is working fine with zvm and it took ages last time I did this!! Is there another solution Thanks

    Hi,
    I have had another look at the sticky's etc but still not any wiser
    !!! Anybody give me an idiot's guide? LOL

  • Creative Zen Sleek Photo & Windows Vi

    I've got a Creative Zen Sleek Photo player, and I just got a new computer for school. Since all new computers come standard with Vista, I can't download any of my Creative software because it is not compatible with Vista. Is there any kind of?download update or file that I can get so that I can make the software compatible and install it's

    You do not need to install the software on the disc. The driver is nati've to the Vista OS. Windows Media Player can Sync to the player rip cds, ect.

  • ZEN SLEEK PHOTO & WINDOWS 98 SE!! AAAAAARGGH!

    Hi!
    Apologies in advance if this problem has already been raised and addressed, but due to a mismatch of information, I find I have now invested in a lovely mp3 player (namely ZEN SLEEK PHOTO) I can't use. The problem? It's mimimum OE requirement is XP and I'm still running WINDOWS 98 SE. Okay, obviously the solution (ahem) is to upgrade to the XP System, but, I'm hearing all sorts of talk of driver updates, installations, fixes etc and wondered if someone knew of any available remedy here on Creative. At the present time, the installation disc is not chuffed with the OE system and I can get no further.
    Anyone have any nice, straight-forward step-by-step solution they'd care to share?
    Cheers
    TinoMessage Edited by TINOBEN on 0-04-2006 09:34 PM

    <EM>It's a PlaysForSure device, and uses the same drivers any other PlaysForSure device uses. It's standardized.</EM>
    I've finished downloading the drivers required. Do I now just need to connect my player or am I required to install the software on the ZEN SLEEK PHOTO first? The last time this was unsuccessful because of the Operating System. So if all this works, I'm guessing that it will be a case of transferring mp3 files (hopefully straight from my hard dri've through WMP) into the Zen player.
    Can you please confirm the procedure using WMP?
    Peter

  • Zen Sleek with Windows

    Just purchased Zen Sleek. Literature says it will work with Windows ME, but when I tried to install the included software, it would not work with this operating system. Contacted customer support, but no response yet. Anybody else have this problem. Next computer will have XP, but until then, I am looking for a possible solution.

    I didn't have QuickTime or iTunes installed so that must not be an issue.
    I have emailed Creative Support and they indicated that I can try to work with their support in another region to see if I can get the install that supports ME. Still working on that but I'm not optimistic.
    Most likely I'll end up buying a new computer with XP so I'll end up having $000 cost to get going with a decent mp3 player. It's unfortunate but likely what will happen. Eventually want to get XP anyway but since my computer is ok for what I'm doing (except hooking up to my mp3 player) I was hoping not to have to do that - especially since I understand that the MTP that requires XP is basically required if you want to use Napster or Yahoo musicl. Since I'll just rip CDs I don't really need that.
    Enough whining I guess. Thanks for the comments.

  • Zen Sleek and Vi

    My previous laptop has died. The operating system was XP. What do I need to do to be able to connect my Zen Sleek to Vista I've tried downloading the software but I'm getting messages saying that my Zen isn't being recognised and other stuff. I noticed this on the Creative website: Solution ID # 6737 Solution graphic or text string http://93.95.7.83/servicesoft/DATA/W.../dot-clear.gif Support StyleSheet (Required) KB Functions (Contains scripts - show_hide(); check_submit() Installing a ZEN Micro, ZEN Sleek, ZEN Touch or ZEN Xtra in Windows Vista START:KB SUMMARY SECTION Summary: If you plan to use a ZEN Micro, ZEN Sleek, ZEN Touch or ZEN Xtra player in Windows Vista, it is necessary to upgrade the player's firmware in a Windows XP computer before it can be installed in a Windows Vista computer.Does this mean that I will not be able to transfer music to the Zen as I no longer have access to an XP operating system.
    Any help will be gratefully received.
    Thanks.

    Dave, I tried to send email to [url=mailto:[email protected]">[email protected][/url]?but it's bouncing back. Can you pl post your correct ID? I'd like to get the procedure for Zen Sleek Photo Installation on Vista. Thanks?

  • Zen Sleek and Xbox 36

    Have anybody tried the Zen Sleek with Xbox 360... and does it work ?

    It is a change, the two firmwares will behave differently so you will notice the difference. There are a few software updates available along with the firmware though (the Software Suite), so you can still use MediaSource for instance.
    If you update to a PlaysForSure/MTP firmware, you should bear in mind that the player will only work on systems with WindowsXP (SP2 and higher) and Windows Media Player 0.
    Cat

  • ZEN Sleek Photo & Windows 2000 p

    I have recently purchased a ZEN Sleek Photo (firmware version .0.0e). I bought this from Argos, where it states quite clearly in the catalogue "Minimum PC specification Microsoft Windows 98SE/Me/2000/XP..." After finding the software refused to install on Windows 2000, I contacted Creative. Customer services refused to help, and I found their general attiture offensi've. On contacting Argos, their reply was "As it states on the website I can confirm that this item will only be compatible with operating system Windows XP and later systems." Well thank you Argos. Verry helpfull after already stating it works with Windows 2000!
    I have found a latency driver
    http://us.creative.com/support/downloads/download.asp?DriverLang=033&searchString=+P4S_PCDR V_US__0_00.exe&Image.x=26&Image.y=3
    This and WMP9 work with the player under Windows 2000, except that the track numbers are all -. I have found reports of this being a fault of WMP9. I then tried winamp, as it apparently works with the Sleek Photo.
    http://forums.winamp.com/showthread.php?s=9d604eed60033b9e5de774d3d597078d& threadid=238885&perpage=40&highlight=&pagenumber=3
    It will not show the player at all (even after reinstalling drivers and winamp).
    Can anyone help? I've no idea what to do next, and the player is currently a very expensi've paperweight.

    I don't think this is going to help but here's what I've experienced with winamp:
    I'm running xp/sp2. I was using winamp 5.2 and it would work with my zen touch and also with my iri'ver h0 (even though it would take a real long time detecting my iri'ver). Then I switched to winamp 5.24 and it wouldn't detect my iri'ver anymore, in fact, for some weird reason, winamp figured it was a cd dri've... Can't say if 5.24 worked with my zen touch since I didn't try it but it definitely didn't with my iri'ver. When I switched back to version 5.2 both players worked alright. Maybe somebody else knows if your problem could be a bug in the new version? There definitely is one with my iri'ver.

  • Creative Zen Sleek and the Now Playing-part of the firmw

    Hi,
    this week I got my Creative Zen Sleek. I'm very satisfied, except for one thing - the Now Playing-part of the firmware (the list with all the songs queued up). In the old Nomad Jukebox Zen firmware, the list was divided by artist or album name. On the Zen Sleek, however, the list is just going on without even showing which songs belonging to which album etc.
    This is really annoying me - would it be possible to fix this, or at least consider the possibility for this to be integrated in the next firmware upgrade?
    Sincerely
    Hein Haraldson Berg

    & Putting the X-Fi into Recovery Mode and selecting clean up seemed to fix the problem, but it does still come up randomly.
    The clean up puts the player menus back to their defaults though... any chance that in a future fix for the player, this wouldn't occur?

  • ZEN MICRO AND WINDOWS ME

    Can anyone tell me how to get music files from Windows Media to my Creative Zen Micro?
    information would be great. Thanks

    asilayhoping wrote:
    My version of firmware is .02.05 i've got windows XP home edition and windows media player 0
    Isn't this the wrong firmware for the Micro to use it with WMP0 and Windows XP?Message Edited by ifonline on 06-0-2005 06:4 AM

  • Zen Micro and Windows 98 proble

    Hello, I just received my Zen Micro and have been trying to transfer files from Windows Media Player. I do have Windows 98, but was told it would not be a problem.
    First my Micro has been charging for close to 6 hours and I am still getting the blinking thunderbolt. It doesn't seem to be getting fully charged and I am wondering if it is my computer or the battery.
    I have not been able to install the creative software. The logo comes up but when I click on next, nothing happens.
    I do have Media Player, but when I connect my Micro to the computer, it does not seem to recognize it and I am unable to transfer my files.
    Any suggestions or comments would be appreciated. I have searched the site, but nothing really hel
    ps.
    Also, I have sent a email to Creative Tech support, but have not heard back yet.
    Thanks,
    Dan

    I'm pretty sure it won't work under Win 98, although it might work under Win 98 SE.

  • CREATIVE ZEN MICRO and WINDOWS VI

    I hope this question has not been repeated.
    I have a Creative Zen Micro and have attempted to install it on my current computer that uses Windows Vista 32-bit. However, it was unable to install or find the driver necessary.
    I've already looked at the 'driver release plans'?for this product and there is only a page regarding 'Nati've Support', which says 'The MP3 products ZEN Micro, ... require the latest firmware to ensure Nati've Support in Window Vista'.
    I've searched for firmware for the Zen Micro on a Windows Vista 32-bit in English, and found nothing.
    How can I make this product work with my Windows Vista 32-bit computer ?
    Thank you !!!

    Robby & Lizzy
    First of all for a little background information, the problem lies in a problem between Creative's firmware installation program and Windows Media Player . WMP is standard in Windows Vista. As a matter of historical information, Creative has not developed any drivers for Windows Vista, therein the rub; Windows Vista does support the Microsoft PlaysForSure initiati've, and many of the older players like the Micro series does have PlaysForSure firmware available to enable the player to be used in Windows Vista.
    Now for an outline of the necessary ste
    ps.
    Back up all of the content on your Micro. The firmware that you will install includes a disk format that will erase all of the content and change the way that the disk dri've on the Micro is formatted.
    You'll need to find a Windows XP system that does not have Windows Media Player installed. You or the owner of the system should also be knowledgeable in the use of Windows XP System Restore feature so that you can return the system to it's previous state after you are finished with it.
    Create a Restore Point on the XP system. Download and install the drivers for your Zen Micro to the XP system. This will enable the player to be recognized by the computer.
    Download the PlaysForSure driver for the Micro, V2.2.02, to the desktop of the XP system.
    Connect the player to the system with a USB cable and execute the program.
    When the firmware installation has completed, the player will reboot. You may disconnect the player. After you have confimed that the firmware revision is correct on the Micro, do a System Restore to put that system back in the condition that you found it.
    Connect the Micro to your Vista system and it should recognize the player and install the nati've Windows PlaysForSure driver and pair it with your Micro.
    RobbyBobson wrote:
    Would it be possible for someone to post a step by step guide that helps me understand what exactly I have to do to get my Zen working. Help would be much appreciated.

  • Zen Sleek and Zen Produc

    Just a quick question. Planning on hopefully getting a zen sleek tomorrow. living in the uk and just wanted to double check all the zen products wherever they are brought come with a one year warranty on them correct? Any other happy zen sleek customers?Thanks
    Jonny

    Thats sounds like gd news. I'll wait one day and get the player on friday instead and try and find out about it quickly thanks for support mate. If the information is added in this thread that wud be great to hear! Is there any sleek owners out there and have there views on the player? Was agreeing prob with a comment made in another thread. This forum is prob for a small selection of problems that people are having with their zen players and dat the majority of customers are definately satisfied with their players. U agree?Jonny

Maybe you are looking for

  • How to make a pop up within if else

    I'm now making an user interface which will be used to control a remote robot. I want to make it so that when a button is pressed, a window will pop-up and tells the user what the robot is doing. At the moment, I can only make it to show the message

  • Save as PDF stopped working since updating

    I am using Photoshop/Lightroom Photography CC, Office 2010 on Windows 7 Home (64bit). Since updating to the latest version of Photoshop in the last week or so, saving as a PDF file seems to have stopped working in Word & Excel. Could there be a link?

  • Re: Custom Paper Size

    Hi, Running VS 2005 I want to create a report that will be exported to Excel (not printed) once opened in Report Viewer. I have many columns so I need to have the report about 23 inches wide, but I also don't want to select a specific printer (No Pri

  • Lost CS4 Photoshop Extended disk

    I misplaced my CS4 Photoshop Extended installation disk and I need to install it on my new laptop.  Where can I download this version?  I have seen the link for Prodesign tools but I was concerned to use it because its not on Adobe's website. 

  • Zen Touch 40GB and Windows Vista

    Hi- Apologies for opening a new thread,I can see there have been others on the same subject but cannot make head nor tail of them from the search function. I have a 40GB Zen touch thats nearly full,I love it,its the best device I've ever had or ever