Zen Sleek Photo on Amazon.co.uk Link Ins

Amazon.co.uk finnaly have the Zen Sleek Photo listed, and look at all the information it has on it!!!
http://www.amazon.co.uk/exec/obidos/...474838-8240402
When will it be released WHHHEEEENNNN!!!!!!

branded34,
Go to the Microsoft website and download this patch.
http://support.microsoft.com/kb/80509/en-us
Run the patch and try installing the software again.
Jason

Similar Messages

  • Zen Sleek Photo Driver nee

    I lost my zen sleek photo installation cd and now need the drivers, what should i do'? could anyone upload somewhere the installation cd image file?

    I had the same problem. After stumbling around I finally clicked the "Identify Your Product" link in the "Downloads" section and then selected MP3 players. This gave me a page listing all the MP3 devices with their product numbers (http://93.95.7.84/SRVS/CGI-BIN/WEBCG....com,case=0848). From this page, I selected the Zen Sleek (NOT the?Photo!). That brought me to this page: http://us.creative.com/support/downl...ring=DAP-HD008.
    I downloaded the latest DRIVER?there (version 2.0.00). Direct link: http://us.creative.com/support/downl..._US_2_0_00.EXE?When you're installing, it will say things about Nomad Jukebox, but just keep going. It worked for me. Hope that works for you also!
    =?EK?Platform: Dell GX260, P4 2.8Ghz, 384MB RAM, WIN XP HOMEMessage Edited by dj_ek on 02-07-20070:2 PM

  • Zen Sleek Photo Car Adap

    Can someone please direct me to a link where I can find a car adapter for a ZEN Sleek Photo I remember seeing it on the site a while back, but I can't remember where it was and I looked all over the Accessories parts of the site, no luck. It would be greatly appreciated, thanks.

    You can give firmware update a try but I'm afraid what coachop said is true. I don't have personal experience with screen replacements but sounds like this is the path where you're heading.

  • Zen Sleek Photo Menu Flow Cha

    Hi, I recently destroyed the LCD on my Zen Sleek Photo, but i can still operate the player, just blindly. I have gotten pretty good at it, but there are some sections which i can't guess at all, such as the drop down menu that controls things like random play and such. I was wondering if anyone has a flow chart image for the menus, or if someone would be so kind as to tell me where things are on the drop down menu, or at the very least, how to turn random play off, ie., press drop down, down 4, click, down , etc. Thanks alot!!
    ah, by menus i mean the options drop down of course, as i have edited the main menu, and i have no clue whats there now hah. thanks again.
    Message Edited by enazgrey on 0-25-2008 09:42 PM

    Hello Enazgrey,
    I tried searching using the following words "Zen sleek photos menu diagram" and found one article in the web. Maybe this can help you. Here's the link. At the bottom part of the article, there is a link given for Creative Zen Sleek Menu Diagram. Good luck.
    Message Edited by Loi-CL on 0-29-2008 03:50 PMMessage Edited by Loi-CL on

  • Zen Sleek Photo w

    Windows Media Play cannot access the file. The file might be in use, you might not have access to the computer where the file is stored, or your proxy settings might not be correct.
    This happens to me every time I try to sync music to my Zen Sleek Photo.
    Any insight would be greatly appreciated.
    Thanks!

    I would contact costumer support if I were you. I honestly can't offer any advice. Here's the link:
    http://us.creative.com/support/
    Best of luck

  • ZEN Sleek photo not recognized tried everything HEL

    i bought my zen photo sleek today, the software installed, the device was recognized. I started transferring files which stopped at file 97 and didn't do anything. I clicked cancel which made the tranfer window freeze and not respond anymore. Task manager didn't open so i rebooted my computer. After this the device wasn't recognized anymore. since then i've tried EVERYTHING i could find on this forum but failed. all setting seem to be ok, i reinstalled al the software twice, downloaded the hotfixes etc. nothing works. I mailed customer service and am wiating for a reply, anyone any ideas in the meantime ?

    general_tomorof wrote:My firmware is version .0.0eaifaik, for the zen sleek photo there is no v2.xx..the release was only few weeks ago, so the firmware is very new and maybe not full functionable on all pc's.and it is not possible to update your firmware without connection to your player..Edit: i already installed WMP0
    Apologies, I just noticed this was a Sleek Photo, rather than the original Sleek.
    I'm guessing the Sleek Photo must be PlayForSure, so for some reason Windows is not picking up the MTP device driver. You can try forcing Windows, through Device Manager, to look in the directory C:\WINDOWS\INF where the MTP driver information is located.
    Failing that, have a look at the link "problems with connecting using MTP firmware" in the FAQ post.

  • Zen sleek photo drivers not recognized by computer

    I have a zen sleek photo that is not recognized by my laptop. I've reinstalled the software 3x and it still gives me a dialog box stating that "an error occurred in the installation of the device.the data is invalid " The software works in my other 2 desktop computers. I had the same situation happen with my zen
    micro and I had to edit the registry. I was hoping somebody know the link on that fix. I got it on this board.
    Any advice would be geatly appreciated..

    branded34,
    Go to the Microsoft website and download this patch.
    http://support.microsoft.com/kb/80509/en-us
    Run the patch and try installing the software again.
    Jason

  • Creative Zen Sleek Photo Firmware Download does not recognize my pla

    My Creative Zen Sleek Photo recently froze up. After restarting it, the "firmware problem" screen popped up. After reading up on it a bit, I decided to first clean, then reformat, and then reload the firmware. Everything went smoothly until I went to load the firmware back onto my Zen.
    For whatever reason a screen pops up that says that my device is not connected to the computer, when it, in fact, is. I have tried several things including uninstalling Windows Media Player and repeatedly cleaning and reformatting in hopes that it would recognize it.
    I have had no prior problems with the computer recognizing the device and I have loaded quite a bit of music onto it through this computer. Can anyone please help? Any more ideas? Anything will be helpful and appreciated. Thanks?

    HelloHave a look at this thread http://www.anythingbutipod.com/forum...ead.php?t=6328?I had a similar problem with a Zen Sleek Photo and I am sure that this was the thread I used to recover the player when a firmware upgrade failed. Regards?

  • Zen Sleek Photo Freezes/Locks Up after about 5 minutes usage (need to drain battery to recov

    Hi,
    My 20G Zen Sleek Photo has just recently transformed itself into a useless brick.
    No matter what I try and do, it always ends up freezing after about 5 minutes usage. When you force a reset it does unlock but when it comes back on it sticks on the Creative "copyright" start up screen.
    I've reformatted and re-installed the firmware several times but with the same result.
    font face="comic sans ms,sans-serif">
    The only time it totally unlocks is when you either:
    () let the battery fully drain and then recharge it or
    (2) you disconnect the battery lead and then press the On/Off switch for several minutes.
    I've looked everywhere for a solution/reason but nothing. You find plenty of people with the same problem but no answers. Surely someone knows how to fix the problem
    Is it a faulty battery (unlikely because mine charges up fine and holds it charge well)
    Is it the hard dri've (very unlikely since the player can start up correctly [given the above recovery procedure] and play tracks within the 5-0 minutes you have available)
    Is it the firmware (I doubt it, I can't see what the firmware's got to do with a delayed lock up, having worked fine up to that point)
    Is it the motherboard (maybe....., to my mind it points to a component failure that allows an electric charge to build up and not dissipate, the only way to discharge it is to short the battery pins [with, I hasten to add, the battery removed!])
    font face="comic sans ms,sans-serif">
    Has anyone within the Creative community successfully solved this problem Has anyone received a decent answer from Creative
    I find it staggering that the guys at Creative have washed their hands of this problem. They, after all, are the most likely people to identify the problem - only they have a schematic of the motherboard that would allow them to investigate and locate the problem.
    For the record the firmware I'm using is v .0.0.
    Any guidance would be much appreciated,
    Victor

    Is there really no one with an answer to this problem or have I overlooked a previous post that explained the fault.
    BR
    Victor

  • Zen sleek photo is detected in My Computer but not in WMP or Mediasou

    Hi, my Zen Sleek Photo is having some problems.When it connects, the player says it's connected, it shows up in My Computer but not in WMP or Mediasource, so i can't transfer anything. I tried the fixxup thing and the registry edit but it isn't working!!!Any help would be appreciated...

    No one at all?

  • Zen Sleek Photo - How do i know if its charg

    OK i put my new Zen Sleek Photo on charge two hours ago. when will i know if its completed charging?, the charge symbol is currently blinking

    Hey i own a Zen MicroPhoto and I think all the symbols are the same. When its charges, the lightning bolt on the battery will stop and I think there would be like a plug thingo covering the battery.

  • Creative Zen Sleek Photo & Windows Vi

    I've got a Creative Zen Sleek Photo player, and I just got a new computer for school. Since all new computers come standard with Vista, I can't download any of my Creative software because it is not compatible with Vista. Is there any kind of?download update or file that I can get so that I can make the software compatible and install it's

    You do not need to install the software on the disc. The driver is nati've to the Vista OS. Windows Media Player can Sync to the player rip cds, ect.

  • Transfering music from Napster To Go to Creative Zen Sleek Photo probl

    Hello
    I have a Creative Zen Sleek Photo with Napster To Go. I have Windows XP home edition. I can rip a CD to the hard dri've
    of the computer and transfer music to the mp3 player, but I am receiving a message when trying to transfer music files
    from Napster To Go. The message is the mp3 player will need an update to the firmware to work with Napster To Go.
    The Zen Sleek Photo has the latest firmware. I had been able to transfer music from Napster To Go until recently.
    Napster support referred me to Creative support but the Sleek Photo is past the warranty. Any help would be appreciated.
    Thank you.
    Bridget Ferrazzano

    I had problems for the first month of my Napster membership (while I was still in the trial period). I nearly went elsewhere, but stayed with it. As soon as the trial period was over, everything worked perfectly. One suggestion is to use the same software for everything. Whether you use Creative media source, Napster's own software or media explorer or any of the others, stick with that one only. Do not give up and go to itunes. What a waste of money!?If you need to reload firmware or try another software, it's worth it.
    I also had some issues getting help. Napster said the problem was with Creative and Creative said the problem was with Napster. Don't give up. Can you get ripped songs in?

  • Zen Sleek Photo gets USB DEVICE NOT RECOGNI

    I have ZEN Sleek Photo which i use for about a week now.
    Today I connected the player to the computer and got
    "USB DEVICE NOT RECOGNIZED" window in Win XP
    and the Zen Photo froze.
    Disconnected it, reset it using a pin, then turn it on and it's "re-building library"
    It works good as a player but i can't connect it to the computer.
    Tried restarting the computer, restoring the windows to a previous day, connected to all possible USB ports nothing hel
    ps.
    Hope for an answer
    Thanks in advance,
    Danny
    UPDATE.... PROBLEM SOLVED.. LOOK BELOW.. FRED'S SUGGESTIONMessage Edited by dindia on 07-24-2006 2:49 AM

    fred38 wrote:
    Hi i had this problem too and the solution was amazingly simple. (I found it by searching on Google for ages!) Turn your pc off and then unplug it from the mains for approximately 30 mins. I know it sounds crazy but apparantly static electricity can cause problems with usb devices particularly if you have your device already plugged in to USB port-Windows forgets its there! After 30 mins plug your pc back in to the mains and voila! your Zen will be recognised again.
    2:44 AM : After 30 minutes of trying to fall asleep with no success turned on computer and connected the Zen... Didn't have much expectations, but IT WORKED! IT REALLY DID! WINDOWS FOUND THE DEVICE CORRECTLY AND EVERYTHING IS WORKING NOW!
    THANSKS FRED!
    Danny

  • Zen Sleek Photo on Windows 98

    My 20GB Zen Sleek Photo arri'ved today, but my computer won't let me run the installation disc. It keeps giving me a message saying that the Windows operating system on my computer is not supported by the product. Is there any way of getting around this? I would appreciate it if someone couple help, thanks.

    Hi ProvWolf,
    Unfortunately, as the system requirements (on the site and box) detail, this player requires WindowsXP (with SP or later) or Windows XP Professional x64 edition. Windows98SE is not supported.
    http://www.creative.com/products/pro...uct=4259&nav=3
    Cat

Maybe you are looking for

  • How do I convert an html design web site to CSS template and layout?

    Good Morning, All! How can I convert, apply, or change, efficiently, my html web pages into a CSS template so I don't have to change each page every time I add something to the main page-also, I currently have two tables (I know, old-fashioned) one w

  • How to configure E-Mail servers in SAP?

    Dear All, | have configured e-mail server in R/3 properly (using SCOT tcode). However, when I am trying to send mails for testing purpose (using SBWP tcode), its showing status as "send process still running". But after some time, its showing status

  • How to modify the selection screen frame.

    <b>Friends, I need to create two separate blocks A | B. Using SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME , we can able to create the blocks one below the other. How to create two blocks side by side? And also how to fix the size for the block Exam

  • SNP Heuristics generates purchase requisition

    Hi Experts, I have a requriement to generates purchase requisitions start date at Monday; Im trying to use period factor but still I gets the reqs still falls in different days and also the planning calendar under the lot-size. Is there any other way

  • No Page Displayed in the window (HTML)  when a WItem is Executed from Email

    Hi Workflow Masters! I have a problem regarding my Email Notification regarding SWNCONFIG. When a wokitem received thru Email (Lotus) is Executed, a Window opens and <i>supposedly</i>, the workitem will be displayed. However, there is no page display