ZEN sleek wont go into recovery mode... help!

I am trying to fix an old (2005 I think) ZEN Sleek which has recently stopped working. Other half recently got a new computer and her new system (Windows 7) would not recognise it. I have XP & Windows media on mine, so with a bit of digging I found out how to upgrade the firmware on her ZEN. I did this this successfully last year, so her ZEN has now worked OK with windows 7 for the last 9 months - until now. Symptoms : ) Switch on - get spash screen followed by "Creative Zen" - then all keypad lights flash once and screen reads "Select music to play from music library" BUT none of the keys will respond. The only thing which responds is the OFF button. 2) Resetting using a paperclip on the little hole - gives EXACTLY the same response - only the OFF button works 3) Holding play/pause & resetting - exact same response - only OFF button works. It will not go into recovery mode. Connecting to PC. ) PC recognises it as ZEN sleek. screen shows "Docked" as normal. 2) Can access the Hard Dri've through Windows Explorer but not through Creative Media Organiser. Media organiser does not recognise that it is attached. HD works OK. Can save and retrei've files to/from HD via Windows. 3) Even tried reinstalling the new firmware again. It all upgrades successfully (it says so on my PC and on the ZEN screen) but still won't go into recovery mode. Anyone have any ideas or do i now have the world's most expensi've paperweight ?

IS THIS HOW YOU DO IT?
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY.
3. Repeat the process if necessary.

Similar Messages

  • Help! my Zen MIcro has gone into recovery mode and wont get out of

    My Micro suddenly just went into Recovery mode and i have tried all the options and have had no sucess with any of them has anyone else had this problem if so did you get out of it !! i need help cause the bus ride home is no fun with out it

    Ohareehoh,
    If the Zen Micro is clicking at the point you are describing, then it sounds like the Hard Dri've has been damaged and you are physically hearing the clicking of the dri've. I would suggest contacting support for repair options.
    Daniel

  • TS2529 iOS update throws phone into recovery mode - HELP

    The current iOS update seems to have thrown the phone into recovery mode now requiring restoration through iTunes. Of course I don't have photo stream on and fear losing all my photos. Any way around this?

    Reset, hold both the home and power buttons until the iPhone begins to restart. If this works great. If not you may have to Restore the iPhone to get it working again. If you decide to do this you may even have to use DFU Mode to Restore. Here are the steps for DFU. Open iTunes on computer. Connect iPhone to computer with USB cable. Hold both Home and Power button, after exactly 10 seconds release the Power Button, keep holding the Home button until iTunes recognizes iPhone in Recovery Mode, usually about 20 seconds time. If the iPhone screen is black, blank this is DFU Mode. Click the Restore button of iTunes.

  • I updated my iphone 5 to ios 6.something to get rid of a notification and it went into recovery mode!!! My photos are not backed up or on icloud. i havent restored yet bc i cannot lose my photos but tinyumbrella wont work. HELP! please:(

    I updated my iphone 5 to ios 6.something (something about the speakers) to get rid of a notification and it went into recovery mode!!! My photos are not backed up or on icloud. i havent restored yet because i cannot lose my photos/videos, etc. but tinyumbrella wont work to exit recovery mode. HELP! please:(
    i tried tinyumbrella (and another similar software) to exit recovery but it only remains on the apple logo stuck there. please is there anything else i can do? i've contacted apple and they have told me the only choice i have is to restore and lose all my data.
    my iphone isn't jailbroken and i've updated before without this problem so i'm not sure what has happened. is there anyyy hope please ???

    First I would try to hold down the power and the home button for about 15sec, but at least as long as the iPhone restarts, if it is still stuck or still in recovery mode then I can suggest you the tool "Wondershare Dr. Fone for iOS", it is both a Windows and Mac tool and I just used it today to get my iPad out of the Recovery mode.
    Tell me if any of these options worked for you.

  • HT4972 3gs wont boot up into 'recovery mode' can you help

    Hi.
    I try to put my 3gs into recovery mode but it just starts the phone as normal, as if 'recover' is not possible.

    Not only will the warranty be void, you will have given up your ability to get a discounted out of warranty replacement phone.
    If you still can't get it into recovery mode, try DFU mode: http://www.iclarified.com/entry/index.php?enid=1034
    If that doesn't work, make an appointment at the genius bar.

  • My iphone 4 wont start or even go into recovery mode. Help?

    My iphone was working fine until I went to check something on the phone and it wouldn't turn on.
    I tried all the common things to fix it:
    1) I pressed and held the power button to restart it in case it had shut down.
    2) I pressed the home and sleep button to force shutdown
    3) I tried charging it on my dock (eventhough at last check the battery was at more than 90% moments before)
    4) I connected it to itunes on my macbook.
    5) I disconnected it and pressed and held the home button before connecting it again to the mac to enter it into recovery mode but it still wouldn't start.
    Any suggestions? Thanks

    http://support.apple.com/kb/TS1275

  • My iPhone 4 will NOT show up on iTunes, not even by putting it into recovery mode. Can anyone help me fix this problem? I would like to use iTunes with it.

    I got an iPhone 4 on Thursday.
    I connected it to my PC, a Windows Vista, that day and nothing showed up besides a "camera."
    My computer picked it up as a camera, which I understand is a common occurence in the iPhone.
    After browsing countless youtube videos and Apple Forum Questions, nothing helped.
    I put it into recovery mode by holding on the power and menu button, but when I opened iTunes it still didn't detect anything.
    I feel like I'm almost hurting my iPhone because I turned it off and on so many times, and plugged it in and out several times, and so forth.
    Here is what happened after putting it into recovery mode: 1. A Windows "device locator" popped up. 2. It was looking for a solution to help me with the unknown device, or iPhone. 3. I clicked onto the find solution button, and it told me that I needed a disc.
    --- I didn't have a disc, so I looked up this problem and it told me to manually find Apple mobile device support on my driver, so I did.---
    4. I then went onto Control Panel and clicked on SYSTEM and MAINTENANCE and went to DEVICE MANAGER.
    5. There I found my iPhone listed under USB controllers.
    6. I uninstalled and installed it several times.
    7. I then manually found a program to ease the problem. The program was "apple mobile device support," which was located on my apple driver.
    8. Nothing happened, besides it reporting to me that Apple USB was found and that "code 39" or "code 1" was in the way.
    9. I didn't know what to do with this....
    By this time, I was about to give up on my iPhone and return it back to the store.
    I tried again, but in a different way this time.
    1. I put it back into recovery mode and I opened itunes.
    2. itunes reported to me that some burning or CD/Drive software was missing and that I needed to reinstall it.
    3. SO, I reinstalled it several times, about 12 (iTunes), and nothing changed.
    4. I then looked up the problem of why the CD/Drive software problem kept popping up.
    5. I fixed it by going to my registry and adding an UpperFilter with the code GEARaspi...something like that.
    6. The problem was fixed, but still no iPhone onto my itunes.
    I stayed up all night last night to fix this problem...I'm annoyed and tired.
    I tried another problem to fix this.
    1. I didn't put it into recovery mode.
    2. My iPhone showed up under portable devices under "device manager," from SYS/MAIN"
    3. I did update software.
    4. I clicked on "apple mobile device support" but nothing happened.
    5. It reported to me of the Code thing again.
    I even called the Apple people and they didn't know what to do, so I stopped calling them...because they only had limited options to fix the problem.
    Can anyone help me?

    There's a whole lot to read in your post, and frankly I have not read it all.
    Having said that, this troubleshooting guide should help:
    http://support.apple.com/kb/TS1538
    In particular, pay attention to the mobile device support sections near the bottom, assuming you have already done the items above it.

  • My iphone 4 wont turn on. it justr randomnly turned off and i have tried to hold the home and sleep buttons for a minute and also tried to put it into recovery mode but nothing is working?

    my iphone 4 wont turn on. it justr randomnly turned off and i have tried to hold the home and sleep buttons for a minute and also tried to put it into recovery mode but nothing is working?

    See Here  >  http://support.apple.com/kb/HT1808
    You may need to try this More than Once...
    Be sure to Follow ALL the Steps...
    But... if the Device has been Modified... this will Not necessarily work.

  • Iphone 4 went into recovery mode when trying to restore, only option available now is to "restore and update" however this will not work, how can you restore from a backup once in recovery mode and only option is "restore and upgrade"? Please help!

    iPhone 4 went into recovery mode when trying to restore it. Now the only option iTunes allows is for "restore & upgrade", it is not offer an option to restore from a backup, says that must first do the upgrade, when attempting to do the upgrade the iPhone won't accept it.
    How can I restore from a back up in recovery mode when the only option is "restore and upgrade"?
    Please help.

    You don't you must restore your phone first and then you will have the option to restore from your backup.
    If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support

  • Please help! iPhone gone into recovery mode

    Hoping someone can help me, getting worried!!  I just plugged my iPhone 4s into my Windows computer to update and sync etc as I hadn't for a while.  During the updating and backup process, my phone just went into recovery mode, it disappeared from the devices menu and a message box came up saying 'iTunes has detected an iPhone in recovery mode.  You must restore this iPhone before it can be used with iTunes.'  My phone screen is stuck on the iTunes logo with the usb picture.  I have tried restarting my computer, holding down both buttons on the phone etc but it just stays the same....any advice would be greatly appreciated!!!

    See Here  >  http://support.apple.com/kb/HT1808
    You may need to try this More than Once...

  • Ipod shuffle 2nd gen wont sync music it always gets stuck on a different song everytime and the puts the ipod into recovery mode!

    Hey guys
    My dads 2nd gen ipod shuffle will not sync music. I try to sync the music by autofill and manually and it freezes for a long time,and then says the device cannot be found. It then puts the ipod shuffle into recovery mode and i then have to restore the ipod and loose all the data.

    The shuffle may be losing its data connection to the computer during the time it is syncing.  If you have not already, you should shut down (power off) the computer.  Disconnect all USB devices (except for standard keyboard and mouse if normally used), including hubs.  Do this to Reset the shuffle
    http://support.apple.com/kb/HT1655
    Start up the computer, run iTunes, and connect the shuffle to a direct USB port.  Try repeating the action that is causing the error.
    If that does not help, select the shuffle in iTunes and go to its Settings screen.  There is a checkbox for Enable disk use.  If that setting is checked, uncheck it.  If it is not checked, check it.  Basically, reverse the current setting.  Apply the change.  See of that makes any difference.

  • My iphone 4s was loading a software update and went into recovery mode, I don't want to lose all my data please help me@!

    I was loading the latest software update to "fix bugs and security issues" and my phone went into "recovery mode".  I've never seen this before.  I plugged it into iTunes as shown on the screen of my phone and it says "Iphone in recovery mode detected" and suggested resetting the phone to factory settings. I don't want to lose all my data so is there another way to fix it?  All help will be appreciated!

    Sorry, whatever data you had on your phone has been wipe off already, since your phone is in recovery mode.
    You will need to restore your phone.  Then if you have a backup, you can choose that backup to restore from, if you have no backup, your only option is to sync contents from iTunes.

  • On my ipod touch 4th generation, it somehow got into recovery mode and won't restore! Help please!

    I have been searching on this topic for hours and i haven't found an answer that works so i decided to post the question myself. So on my iPod touch 4th gen., it got into recovery mode somehow and when i plug it in it says something like "ipod in recovery mode, please restore". well i clicked restore and it went through the whole process then said "ipod can not restore. an unknown error ocurred (28)". I have the newest software on the computer and ipod, i restarted my computer a number of times, i changed USB ports, no other USB is plugged in and i just don't know what else to do. The screen is just black and won't turn on. I've tried the hard restart and everything!! pleaseeeeeee help!!

    Error 20, 21, 23, 26, 28, 29, 34, 37
    These errors typically occur when security software interferes with the restore and update process. FollowTroubleshooting security software issues to resolve this issue. In rare cases, these errors may be a hardware issue. If the errors persist on another computer, the device may need service.
    http://support.apple.com/kb/TS3694#error28

  • I was updating my iphone to ios 8 and it went into recovery mode. i went onto itunes to fix it and it said i needed to update my phone. when i clicked on it it said it would take 500  hrs and kept going on, then it would crash. plz help. :(

    yesterday i tried updating to Ios 8. i new there were going to be some problems but i decided to do it. i started the update and less than a half hour into it my phone completely crashed.it went into recovery mode so i connected it to iTunes. i hit restore and update . it gave me and estimated time that kept going up. finally when it got to 800 hours it stopped and said an error occurred. i tried it again and the same error occurred. i am very disappointed in this because i greatly need my phone for school and other important things. i wasn't gonna wait that time anyway. i would like to know if there is anyway i don't have to update, get out of this screen without waiting forever, speed up the time, or get my computer to not crash when it gets to so many hours. (i have windows) plz help me out asap!!!

    I have experienced a similar error with the iPhone 4S.  The new version of iTunes will not let me restore the phone, it must be updated and nothing appears to be happening.  Suffice it to say I am not amused.  Apple needs to work this out - I had trouble updating to 8.0.2 as well.

  • Ipad was forced into Recovery Mode and I can't get out. Please help me!

    Hi all. I'm dealing with a problem and could really use some help. I recently updated my Ipad to ios 4 with no problems and was enjoying it greatly. Afterward, I loaded Pages and Atomic Browser from the app store.
    Anyway, I was surfing the net on Atomic Browser and then turned the ipad off momentarily to grab something from the kitchen. When I came back, the Ipad would not start.
    I'd push the power button but nothing. Push and hold the power button. Nothing. Push and hold the home button. Nothing.
    After many attempts, I decided to push the home screen button with the power button to force a reboot. I did this once a few months ago, and it just restarted my ipad fine. But this was before i updated to ios 4.
    After doing this, it gave me the recovery mode screen with the pic of the usb cable pointing to the itunes logo. It has never done that before.
    I don't want to reformat my ipad, i just wanted to turn it back on. I tried to exit recovery mode by holding the power button and home screen again, but it just keeps me stuck there. Nothing I do can get me out.
    I don't want to reset the ipad and restore a back-up because I will lose some valuable pages documents I created recently.
    Can any one help me?
    Thank you all very much!

    The same thing happened to me. After the big update, I also experienced exactly what you described. I ended up restoring the ipad a number of times.
    The first few times, I restored from a back-up. The last few times I have restored the ipad as new. It would work the next few times I turned the machine on, and around the third time, it would lapse back into the recovery mode, with
    the image of the serial cord connecting to an i-tunes logo on its desktop. This morning, I restored the ipad as new, but only allowed the apps manufactured by Apple to be synced back onto the ipad. I have powered it back on about three times, and so far, so good. I am waiting to see what happens the next few times I turn the machine on.
    I had a very helpful senior Apple express advisor help me on Sunday to do the restore as a new ipad procedure. He said that if that did not work, the next step was having it serviced. He also mentioned that often the third party apps have problems due to getting corrupt and this often happens after a major update. That is why I thought i'd try and see what would happen if I only synced the Apple apps back onto the ipad.
    It is not good though if I can't put third party applications on it without having the problem of lapsing into recovery mode, so I may have to get it serviced. I am wondering how many others have had this problem after the big update last week? Also, has anyone who was an early purchaser and got the flat-rate unlimited data plan subscription from AT&T, had to have their ipad replaced? Was there a problem with AT& T still allowing you to continue your special subscription plan?

Maybe you are looking for

  • How to transfer printer settings from one Mac to another (both OSX)?

    Hello, I have not found a detailed description on how to transfer printer settings from one Mac to another. My issue is that I have a Mac G5 with 3 different settings saved as "presets" for the same printer. This works great, since the posters I prin

  • Can't use LOV with item type "check box" in form

    I have created a LOV that I want to use with a form application in 3.0.9. I need to be able to do multiple choices in this LOV (check box style) in the same query (only queries - users won't be able to update this field) When I choose Check box as th

  • Is it possible to use a JSF Validator to perform a Dependency validation?

    I'm new to JSF, but getting more and more experience everyday. I've create some custom validators for a few input fields on my form and they are working beautifully. What I can't figure out is how to write a validator that will check a field for a va

  • Looking for JAR files for AQ JMS

    Hello all, I installed Oracle 9i 9.2.0.1 and trying to run a JMS Sample that uses JMS oracle.jms.AQjmsQueueConnectionFactory and oracle.jms.AQjmsSession. My questions which jar files should be included in the CLASSPATH. thanks

  • ECC BSP page display from CRM through Transaction Launcher

    Hi Experts, We have a BSP application in ECC and want to launch the page from CRM using transaction launcher. The page is already launched from a different link. Is it possible to use the same transaction launcher from new link to navigate to the sam