Zen Stone Plus Speaker. Browse music without starting the first song in the next fold

Hi everyone,
I'm not sure what I want is possible.
I've had this player for about a?week now and I believe I could browse to the folders while listening to a song. For some reason when I do that now the player?start playing the first song of every folder when I browse through it.
I'm starting to doubt if I remember it right that it was possible to browse through while listening to a song before?
I tried playing with the setting and even did the recovery tool thing to put the player back at the setting it came with. But it didn't work.
Anyone know if this is posible, and how?
Thanks.

Tag support: the ability to select music by album/artist/track instead of folders
Display always on option - i know its to help save battery life but sometimes it would be helpful if the display stayed on
Display artist and song name, inst4ead of just the song name/file name
Alarm clock function: my Zen stone plus has a speaker, and a clock function. My Zen Xtra has a clock and an alarm clock function but no speaker other than headphones (if any are plugged in) for the alarm to sond through, the same is true with my visio:M? the Zen Stone plusw/speaker has a clock but no alarm, and if anything it would make a fantastic little alarm clock with a 'sound' to music or wsound to beep? function.

Similar Messages

My MacBook Pro 10.6.8 prompted me of a new itunes update this morning, so i downloaded it. Since then itunes has been starting up randomly on its own, and starts playing the first song on the list. I quit itunes, and it keeps reopening.

My MacBook Pro 10.6.8 prompted me of a new itunes update this morning, so i downloaded it. Since then itunes has been starting up randomly on its own, and starts playing the first song on the list. I pause the song, and it resumes it on its own again. I'm not joking. So, I end up quiting out of itunes; but, it starts right back up again on its own. After quiting out of the app a few times, it eventually stops reopening; however, about an hour later (or less) it opens again. HOW DO I MAKE IT STOP? I'm just about to delete itunes, because I've had enough of this crap. I hope someone can help. I've restarted the laptop, and it seemed like that fixed it, then itunes started up doing the same thing again an hour later. ituneshelper is unchecked; bluetooth is off; i only have speakers and a mouse plugged in (also charger).

Read this Apple Discussion Thread and possible solutions. The audio jack has been the main culprit, also certain sync and automation settings including connected remotes.

Problem with my brand new mp3 player Zen Stone Plus 2GB ( with built in speaker )

Hi .
I have purchased the following Zen Stone Plus 2GB with built in speaker on 24.06.2008.
From day one, it had a charging problem . Initial charging it'snever go beyond 87%.
After using it for 2 days, at the time of recharging , I found my player won`t get dectected in my PC .
I took the set to the vendor for a checkup . He tried to solve it by resetting , formating etc. But he could only able to to format it's sacrificing its 50% of its allocated space.
My vendor then changed the set with a brand new one, againts that faulty one .
Now the new one worked well for 3 - 4 days , but it is now totally dead .
But the set did not give any indication before it become completely dead.
A few dust particles inside the LCD screen was also observed. I can`t understand how come dust particles can enter inside
a player which is sealed box pack .
Next issue is with the battery which CREATIVE promised of giving a backup of approx 20 hrs of continious playback , which with minimal scuffling and with minimal settings lasted for 0 hrs approx ( 50% less than promised ).
Another thing that i must state is the problem of FM Reception . It is simply terrible . In the same area where my mobile's FM reception is fine , Zen Stone's FM failed to give any reception .
I came to know about Zen Stone Plus from of my friend , who is using Zen Stone Plus GB without any problem for long time.
Pls tell me what to do now, since my player is compleately out of order now , and pls suggest me something regarding the issue of battery backup , FM reception ... etc.
Now i am in a total mess . I just dont know what to do with the set that is few days old .
Pls help urgently .
Waiting for any valued suggestion .
Bye ...

Hi,
I would suggest getting in touch with support, they might be able to help you with this.
Go to the Support section of the website and select your product. On your right, click on Contact Us. You will be provided with a list of troubleshooting options. Click on the one closes to your issue. Go through the suggestions and if the does not work or you have already tried that, scroll to the bottom and click on No, escalate to email. This should bring you to the email form to contact support.

Zen Stone Plus: Does it start playing again where i stopped the so

I hope one og you can help me.
I want to know if the Zen stone Plus MP3 player starts in the same song after it has been turned off.
So if I turn it off 3.4min in a song, does it then start at 3.4 when i turn it on again, or does it start from the beginning of the song
The reason i ask is because i often use the mp3-player to hear "sound-books", and the files are often very long, so its very annoying when my current mp3 player starts from the beginning of the file after i have heard maybe 30 min

I believe the pattern with the Stones has been that if you plug them in for charging, even if you don't update the mp3s, playlists, etc., they essentially get "reset" when they resume.
They pick up where you left off as long as you *don't* plug them in for charging, changing what's loaded, etc.
I don't recall it being possible to do something like set a bookmark.
Basically, you should have several hours of play / resume time like you desire, but if you have to charge the player at some point, you'll have to go back to the beginning of the file. Not sure if they can alter this in future firmware or not.

Queries about Zen Stone Plus 2GB with built in speaker .

Hi ,
This one goes out to all friends who have?used Zen Stone Plus with built in speaker for some time ...
As stated in the box pack of giving a standby time of 20hrs continious playback ...
What is the approx backup time it offers or rather it should offer on minimal scuffling and minimum change of settings of the player?
Reply soon .
Byeee .

I haven't tested it off yet as I always charge it after one bar of the battery indicator has gone. But thought I try to use it'suntil it's completely flat this time. After listening to 4. albums and minimal playing in the menu the battery indicator still says full.

Zen Stone Plus with built in speaker HELP NEE

i had problems copying my media file to my mp3 . error message : The parameter is incorrect .
Therefore i reformat my MP3 , it solve the problem but it suppose to be 2GB , but now become 90 MB . any advice or help?

xmouse,
Here you go:
Firmware for Zen Stone Plus w/ Speaker
You can find any other files you need by going to "Support" and then "Downloads" on this website.
Good luck,
Dale

My zen stone plus 2Gb not starting

i have been using my Creative Zen Stone Plus 2GB since past 7-8months
recently it started giving problems. It dint start up and when i connected to my computer it is asking me to format the dri've when i try to open it..and when i click to format..it says it cant format and then the dri've vanishes from My Compute.
I took to the service centre..tht guy he said he updated the firmware..i came bak ad connected it to my pc to charge...my winamp detected it as an mp3 player and asked me to synchronize which i cancelled..
open the dri've...then when i tried to delete the files...same prob started again!!!
now the dri've doesnt even show up in My Computer..
wat to do?

Moniushko,
Looks like something is wrong with the device, I would get in touch with support if I were you.

Zen stone plus 2gb with built in speaker problem.

Hello everyone.3 months ago i bought a zen stone plus mp3. It didnt appear to me any problems but yesterday i couldn't open it,i thought it would be due to battery lack but when I connected it to my pc neither the pc could read it. :S
Can somebody help me please?

Hi,
I would suggest getting in touch with support, they might be able to help you with this.
Go to the Support section of the website and select your product. On your right, click on Contact Us. You will be provided with a list of troubleshooting options. Click on the one closes to your issue. Go through the suggestions and if the does not work or you have already tried that, scroll to the bottom and click on No, escalate to email. This should bring you to the email form to contact support.

Zen Stone Plus Firmware Wishl

I have a Zen Stone Plus 4GB and I think it's a really nice and sexy device, but is lacking a bit on the software side. With just a few small firmware modifications, I think Creative could make it a much greater player.
I'm starting a wishlist for a future firmware. The list is sorted by priority, with the (imo) most important item on top. If you have any additions, please post them and I'll include them into the list.
I hope Creative's developers will have a look at this list and implement these suggestions!
Improve music browser speed
Problem: Browsing through the folders feels very slow, and often it even misses button presses so I have to press left or right twice to go to the previous / next item. This is most likely because the player starts playing the first track in the folder automatically, which slows down the user interface.
Suggested solution: I suggest the ability to turn off auto-play in the file browser.
Avoid embarrassing situations
Problem: Usually I turn on the player before plugging in the headphones. The player realizes that the headphones aren't yet plugged in and plays back music over the speaker, which isn't desirable when I'm in a lecture that isn't over yet.
Suggested solution: Make auto-play on turn-on an option or add an option to not enable the speaker when the headphones aren't plugged in.
Quick Hold
Problem: I want to put the player into my pocket and want to quickly turn on the hold feature. For this, I need to press: Menu, Right, Right, Right, Right, Right, Right, Right, Menu.
Suggested solution: Add "enable lock" as an option for the "My Shortcut" button.
Quicker turn on
Problem: When I turn on the player, I have to hold down the menu button for 4 - 0 seconds (it seems to be random) before the display even lights up.
Suggested solution: Make it turn on after one second.
Pocket usability
Problem: I'm listening to music with the player in my pocket. I want to skip forward to the next track. I press the forward button, but nothing happens the first time, because the first button press disables the screensaver. I press it again and it skips to the next track.
Suggested solution: Make it skip to the next track when the forward button is pressed the first time.

Tag support: the ability to select music by album/artist/track instead of folders
Display always on option - i know its to help save battery life but sometimes it would be helpful if the display stayed on
Display artist and song name, inst4ead of just the song name/file name
Alarm clock function: my Zen stone plus has a speaker, and a clock function. My Zen Xtra has a clock and an alarm clock function but no speaker other than headphones (if any are plugged in) for the alarm to sond through, the same is true with my visio:M? the Zen Stone plusw/speaker has a clock but no alarm, and if anything it would make a fantastic little alarm clock with a 'sound' to music or wsound to beep? function.

Zen Stone Plus Charg

Good day! I have a problem with my Creative Zen Stone Plus unit. The battery does not get a full charge and according to my Creative Media Lite, it's only 20% or so full. However, when I turn the player display on, it indicates that the charging is already complete (blinking blue LED and a plug sign instead of the lightning sign). In turning the product on, it reads that the player only has two bars? left and then turns to one bar after just 5 minutes of playback. This is crazy since I charge it as sson as the battery indicator reaches one bar. So obviously, it isn't charging. I've already installed the new firmware, resetting and formatting the player, and everything else that I could think of I've already tried them. Went through the messages in this site and all I can see are problems with their own players and no worthwhile solution from the Creative Tech team. I went on as much as to locally look for the service provider of Creative here in the Philippines but they all seem to know less than myself regarding the product.
A side question and comment is if it would be better for my battery to run until there's no more bars in the indicator left (not necessarily drain it) or charge as soon as it hits one bar. The crazy thing is, I'm presumming with the hassle that it is producing, most probably the battery is not in its optimum condition anymore due to the trials that I have been doing to resolve this problem. The crazy thing is that the service provider I've been mentioning also told me that I can charge the player even when it is on, now reading the messages and from my stock knowledge I realized that what she did was irresponsible and utterly detrimental for my battery. This is such a sad condition considering that Creative is just building its name and they seem to be unable to provide a good customer support base for their clients.

Not sure if this hel
ps.
.. I had a similar issue with my new Zen Stone.... Following it's first charge (+3 hours), I used?the player?until the battery went 'flat' and it turned itself off... I tried to charge the player up several times?without success - Creative Media Lite continually reported the battery as having 7% charge - but this never improved... Prior to me taking it back to the store I bought it from, I did a 'reset' (paperclip hole on the top side)... Low and behold - the player started to charge up again....

Zen Stone Plus 4GB - Automatic Shutdown - IT DOES NOT WORK

:Zen Stone Plus 4GB - Automatic Shutdown - IT DOES NOT WORKVHello!
I do possess this MP3 Player (with integrated speakers) for more than 2 years now and have never been using the Automatic Shutdown function of the player (in the menu settings). Yesterday, I went to bed, wanted to listen to some music and tried out this function the first time, but it did not work. I tried it with 5, 0 and 30 minutes. What am I doing wrong or is this setting just a joke?
I am using the current software/firmware and am not a newbie to technical instruments so I do know how to - theoretically - start this function by going to setting - Automatic Shutdown - scrolling to the minutes I want to have - Enter/Confirm with the middle ball-knob at the front of the player.
Maybe some of you might help me, I would highly appreciate that.
Kind regards
Guyfromgermany

Hi JLM, am running .0.05e fine and in fact listening to it at the moment. Is there anyway you can regress back to .0.03 to test your theory? Testing a bunch of 28k CBR MP3s is an easy thing to try also.Message Edited by BlueRobin on 0-02-200802:49 PM

Firmware zen stone plus 4GB with spea

in the dropdown list when looking for the latest version of the firmware for my "zen stone plus 4GB with speaker" i just can found the "zen stone plus 4GB"..
this mean that there are no available updates for my device, or that the model with built-in speaker use the same firmware of the one without speaker?
Thanks for help!

Hi JLM, am running .0.05e fine and in fact listening to it at the moment. Is there anyway you can regress back to .0.03 to test your theory? Testing a bunch of 28k CBR MP3s is an easy thing to try also.Message Edited by BlueRobin on 0-02-200802:49 PM

Used Zen Stone Plus purchased on eBay

%?I have just bought a used Zen Stone Plus MP3 player from a seller on eBay. It came without any software (i.e. a CD) and I have had a problem accessing the Starter Pack from http://support.creative.com? (It downloads the ZENStonePlus_PCApp_CLE_E6__52_0.exe file but gives an error when I run this.)
I expected the display to light up on a long press of the central button (with the USB lead and headphones disconnected) but it shows no response. Windows XP Home recognises it when I connect via the USB (direct to a port), the display lights up briefly and the LED shows blue.But leaving it connected for several hours does not seem to have charged the battery. (The LED continues to show blue until the USB lead is disconnected.)
Any advice for a confused first-time user would be welcome!
David

Try redownloading the starter pack to see if it hel
ps.
Please use the link below:
http://support.creative.com/download...ownloadId=0769?
Refer to this guide on transferring songs to the player using the Creative Media Lite software.
http://support.creative.com/kb/ShowArticle.aspx?sid=3742?
You can also simply drag and drop songs onto the player using Windows Explorer.

Zen Stone Plus Returns to First Track When Recharged???

7Zen Stone Plus Returns to First Track When Recharged?Y Hi Everybody... I had originally posted this question several months ago, but I didn't receive a response.
I didn't see this topic posted on another thread, but I wasn't going to read thousands of posts to get this answer either. My problem is I own two players, one is a Creative Zen Stone and the other is the Zen Stone Plus. My Zen Stone does not return to the first track on the player when I recharge it (it remains on the same track), but the Zen Stone Plus does. This normally wouldn't be a big deal, but my mother-in-law listens to audiobooks. Sometimes those books don't have seperate tracks which means there is a single track that runs for like 6 - 8 hours. Is there a way to allow the player to pick up where it left off? It is a real pain to have to fast forward through most of an audiobook, especially when my player (the less expensi've player) continues where it left off. I haven't seen a download for this, so I'm wondering if it's something that can be fixed or not?

For future benefit to others, I'll answer my own question: No, the Zen Stone Plus should not lose it's place when plugged in for charging or adding files. I just purchased a second Zen Stone Plus, this time the one without the speaker and it remembers track location after charging.
Good thing I'm RMA'ing the first one!

Zen Stone Plus 4G Date B

Just got a Zen Stone Plus 4G for X-mas. Music end going great! Love it! However, I believe I found a bug in setting the date: If I set a day beyond 22 DEC it will not change the Day/Month but instead will advance the YEAR! Examples:OK:5 APR 2005 changed to 2 DEC 2007 becomes 2 DEC 20072 DEC 2007 changed to 22 DEC 2007 becomes 22 DEC 2007 Wrong:5 APR 2005 changed to 25 DEC 2007 becomes 5 APR 20062 DEC 2007 changed to 25 DEC 2007 becomes 2 DEC 2008 For now I set it to 8 DEC 2007 so at least the day of the week (Tuesday) will be correct. I will set the correct date in a week on Jan 2008 which works. Notes Tried the auto sync from the CMLite software (it said the date does not match PC) so I let it change it thinking this would solve the problem. Alas the date became 00CANCEL2007 :-(2) Tried redoing the firmware to no avail3) Tried reset to no avail4) Never tried it with org firmware as first thing I did was update to .0.03 so I can't say if it worked or not in the org firmware. Can someone confirm/deny so I know if it is just my Zen Stone Plus 4G But if it works for you please confirm which version of the firmware you are using and if you have the 4G. Thanks, Matt

BlueRobin,
Unless they change the firmware I believe the next date that will go awry will be December 23, 2008 where the same thing will happen and it will try to roll over to 2009 and again not let us set the day/month for a week. It looks like they simply got the code wrong for the rollover point for a year so it should be a easy fix. But hey, even if it is a more complex issue, a year should be plenty of time for them to fix it:-)
At any rate, after several go arounds with customer service we are (finally) at the point that they are no longer asking me to do things with my player (resets, formats, etc) and they "have escalated this issue to the developer for them to look into this matter." However, at the same time, they are trying to get me to get a Return Merchandise Authorization (RMA) but I am not going that route because I think (esp after seeing other posts like yours) that it is a firmware issue and not just my player. As you and others have noted, everything else works just fine so I don't want to be without a player for something that I think (hope) can/will be addressed via a firmware update.
On that firmware note, they do have another firmware update that just came out for our player?which makes the stopwatch display the milliseconds a whole lot less jerky. It is .0.05 if you don?t have it.
Matt

Zen Stone Plus Speaker. Browse music without starting the first song in the next fold

Similar Messages

Maybe you are looking for