Zen Stone with Macb

I have just bought 2 Zen stones for me and my partner.
I mainly use a Macbook with the latest Mac osx. I cannot seem to find any help to using these on my mac.
Any ideas, I am normally an Ipod girl.
I do have a laptop with XP installed. Most of my music I have ripped to MP3 format, will I be able to drag these to my stone.
Cheers
Sarah

My Zen Stone does work with my Mini Mac (OS X 0.4.7) but there's a snag. If you connect the Stone via USB when the Mac is on then it doesn't appear as a mass storage device on the desktop. The Stone can be seen by in the system profiler utility, but it's not correctly functioning. To enable you to use the Stone on a Mac you have to reboot the Mac with the Stone already connected via its USB cable. If you unmount the Stone then you have to reboot again.
When you have done the reboot so that the Stone appears as a volume on the Mac then it works very well. It even appears on iTunes (Mac version) as a Nomad MuVo. This is without using any special software/drivers to make this happen. So not only is the ZEN Stone a mass storage device that can be filled by just drag-n-drop, you can choose to use iTunes if you wish. There's no 'random fill' facility in iTunes (as you get with a shuffle), but random filling can be done by using the iTunes 'party shuffle' feature - just create a new party shuffle list then drag it to the Nomad MuVo icon. Easy.
Let's hope the initial connection issue will be fixed soon with a firmware update.

Similar Messages

Creative Zen stone with speaker not recognized by Vista 32

My creative zen stone with speaker is not recognized by computer. Downloaded starter pack and it worked, but the first time i disconnected it and connected again, the device is not in "my computer". It is listed as working properly under "safely remove hardware". Uninstalled drivers, and connected again, driver was installed and I am told the device is ready to be used, but it is still no where to be seen, and update tools etc. also does not recognize connected device.
thank you

Try going into "Control Panel->Administrati've tools" and clicking on "Computer Management". Find "disk management" in the left pane and click it. Your Stone should be in the right somewhere. I think you need to right click, then "choose dri've letter and paths" and give it a dri've letter with the "add" button. Let us know if that works.

Zen Stone with built in speaker not being detec

I just bought a Zen stone with the built in speaker for my daughter, she's only had it for about 3 weeks and she told me the other day it wouldn't turn on. So i connected it to my computer thinking it wasn't charged anymore. After connecting it, it tells me there's no detection of the device and the found new hardware keeps popping up and no matter what, it won't detect the player. I have a Zen Stone that i bought almost a year ago and it connects and charges, but the new one won't. I've tried the suggestions on the site and i can't get it to work. It won't turn on or do anything. I need help!!! I'm starting to get annoyed!!!!!! I'm running Windows XP if that hel
ps.

Hi Steph4364,
It looks like something's wrong with the device. Best to get in touch with support for further assistance.

Updating error when updating creative zen stone with Creative ZEN Stone Starter Pack 1.10

Im trying to update my zen stone(which im so glad i bought)with the update software app(new starter pack) that was released oct 22 07 ut am getting string errors.First i tried using the update software in media lite and i get string errors.
i quote : string id 2225 not found plus string id 2208 not found.
I tried installing a couple of time with no apps open and i get the same error. I also tried dloading the app from creative support site myself and when i try install it i get the same error.
The q Is there a problem with the new update or is it my pc.
I am using XP professional:52 Ram.
My current software version is .06.0.
The file im trying to update is ZENStone_PCApp_CLE_ L6_0_08(4.64 MB)
Id appreciate anyones feedback on this as id like to keep my player uptodate when it comes to critical updates like this.

Try going into "Control Panel->Administrati've tools" and clicking on "Computer Management". Find "disk management" in the left pane and click it. Your Stone should be in the right somewhere. I think you need to right click, then "choose dri've letter and paths" and give it a dri've letter with the "add" button. Let us know if that works.

My creative zen stone (with speakers) is being very strange! Please he

Hi!
I got a pink creative stone with speakers (and no screen) about a month ago.
This morning I tried to turn it on, and the green light came on, but there was no sound. When I plugged it into my computer, it wasn't recognised, and it didn't come up on my computer, therefore, I can't use the recovery tool
. No amount of pushing at the on and play button, or resetting it with a paperclip works.
I'd really, really like some help!!! Thankyou very much!!!!
Katherine

here's my suggestion, if you have not formatted your player before, format it using fat32. What happens is, it immediately plays the songs 3 to four seconds after you press the play button long enough.
with the default settings of zen stone, the player starts playing songs after ten or so seconds that might be the reason you had time to fiddle with the toggles before the songs play when in fact it takes that long because it wasn't formatted to fat32.

Creative ZEN Stone Shuffle Mode?

%Creative ZEN Stone > Shuffle Mode? I recently bought a Creative ZEN Stone 2GB (2nd generation) MP3 Player. I created one folder with random music I like to listen to while making sports which I'd like to play in Shuffle mode and some other folders containing some complete albums, ordered with numbers in front of the file names. If I switch to the "sports" folder an choose Shuffle mode, the player seems to shuffle all the files on the Player. Of course I'd like it to shuffle only the files contained in the "sports" folder, listening to ambient music during sports doesn't motivate me too much you know. And if I want to play the "ambient"-folder in Shuffle mode, I don't want to listen to power metal at all.
Did I miss something or is the Player unable to shuffle one single folder? Correct me if I'm wrong, but if you choose Shuffle mode, it shuffles all the files on the Player, regardless of any folders.
Is there any (probably 3rd-party) firmware out there with which I can make my Creative ZEN Stone 2GB (2nd generation) shuffle only one single folder?
Thank you in advance for you answers.

When you say second generation, do you mean zen stone with speaker or/and screen
On the zen stone plus with speaker ( and screen) you can shuffle just the contents of a folder without playing anything from another folder b y doing this:
Music > select a folder select play mode, select shuffle folder, job done.

Creative Zen Stone (w/ speaker) firmware 1.04.03 (ZENStoneSpeaker_PCFW_US_1_04_02.exe) releas

Hello Everyone,
There is a Creative Zen Stone (w/ built-in speaker) firmware released. Please post your feedback here.
Release date : 24 Oct 08
File Name : ZENStoneSpeaker_PCFW_US__04_02.exe
Filesize: 82.66 Kb
This download contains an improved version of the firmware found on your Creative ZEN® Stone (with built-in Speaker) player. It further improves the speed of fast forwarding long duration tracks. For more details, read the rest of this Web release note.
Enhancement:
It further improves the speed of fast forwarding long duration tracks.
Requirements:
Microsoft® Windows Vista®, Windows® XP Professional x64 Edition, Windows XP Service Pack 2 or later <
USB port
Creative ZEN Stone (with built-in Speaker) player
Note:
To install this firmware, do the following:
Download the ZENStoneSpeaker_PCFW_US__04_02.exe file into your local hard disk. <
Close all application windows that are currently running on your computer.
Connect your player to your computer.
Double-click the downloaded file and follow the instructions on the screen.

Hi Rich_T,
You might have misread it but the link that you're looking is actually for the Zen Stone Plus w/ Built-In speaker while the new firmware is for Zen Stone (only) w/ Built-In speaker.
Here's the link to that new firmware.

Problem with my brand new mp3 player Zen Stone Plus 2GB ( with built in speaker )

Hi .
I have purchased the following Zen Stone Plus 2GB with built in speaker on 24.06.2008.
From day one, it had a charging problem . Initial charging it'snever go beyond 87%.
After using it for 2 days, at the time of recharging , I found my player won`t get dectected in my PC .
I took the set to the vendor for a checkup . He tried to solve it by resetting , formating etc. But he could only able to to format it's sacrificing its 50% of its allocated space.
My vendor then changed the set with a brand new one, againts that faulty one .
Now the new one worked well for 3 - 4 days , but it is now totally dead .
But the set did not give any indication before it become completely dead.
A few dust particles inside the LCD screen was also observed. I can`t understand how come dust particles can enter inside
a player which is sealed box pack .
Next issue is with the battery which CREATIVE promised of giving a backup of approx 20 hrs of continious playback , which with minimal scuffling and with minimal settings lasted for 0 hrs approx ( 50% less than promised ).
Another thing that i must state is the problem of FM Reception . It is simply terrible . In the same area where my mobile's FM reception is fine , Zen Stone's FM failed to give any reception .
I came to know about Zen Stone Plus from of my friend , who is using Zen Stone Plus GB without any problem for long time.
Pls tell me what to do now, since my player is compleately out of order now , and pls suggest me something regarding the issue of battery backup , FM reception ... etc.
Now i am in a total mess . I just dont know what to do with the set that is few days old .
Pls help urgently .
Waiting for any valued suggestion .
Bye ...

Hi,
I would suggest getting in touch with support, they might be able to help you with this.
Go to the Support section of the website and select your product. On your right, click on Contact Us. You will be provided with a list of troubleshooting options. Click on the one closes to your issue. Go through the suggestions and if the does not work or you have already tried that, scroll to the bottom and click on No, escalate to email. This should bring you to the email form to contact support.

Lame Foldernavigation with Zen Stone plus with spea

I purchased the 4GB Model because i hear a lot of Audiobooks. Those are organised in folders. I downloaded the manual / help file before purchasing and was quite happy that the Zen support folders. Now im disappointed the way the Zen Stone handles them. I added some other shortcomings and suggestions of improvement too.
Its not possible to navigate into/out of a folder. Instead you see every folder regardless of it'ss hierachy level. Although the player "supports" up to 4 hierachy levels. This is really disturbing. I want to use those leves to organize my files and to increase overview. Its not possible! So it makes no sense to organize your files as Zen does not show the structure.
So i have to scroll through hundreds of folder. What increases problems is that you cant do that fast. Every time i go to the next folder Zen starts playing this folder. This is not only annoying but takes about 3 sec of time. It gets a little faster if dont hold the button but than you have to press the button so many times.
Great you can turn the display bei 80 degrees. Even greater would be to do that in 90?s ste
ps.
I like to use headphones which also work as a strap so hanging around my neck i can't read the display properly. Due to it'ss round shape it would make even more sens to make this possible. You can even think about making the 4 buttons displayrelevant. (There function rotates with the direction of the display.) The display is big enough to display some tiny icons like the play triangel or a + and - sign. Then you would have softbuttons which can even become other functions you can see directly.
Its good the display turns off after a while to preserve energy. But i dont like to press buttons then different/more. Now after max. 30 sec it turns off. The next press turns it on again and only after this it'ss reacting normally on pressing buttons.
Im kind of used to press the center button for play / stop. Not only the ipod shuffle but many, many (soft)players work exactly the same way. So im kind of confused to press the tiny double button on the headphone side which is barely reachable particulary if you use the silicon cover. I know, i can press the center button twice but after 30 sec i have to press it three times! Just to pause the playback. This can't be!! Imagine how often you have to pause the playback and how often you change settings etc. I really think the functions of those buttons should be exchanged.
The speed of rewind, forwarding should increase over the time you hold those buttons. Now its about 0 sec. which is not enough. This is particulary useful for audiobooks.
If you switch to/playback another file via Directory search Zen should memorize the songposition of the last song. (Bookmark-function) This is also particulary useful for audiobooks.<
I have a suggestion to solve problem and 2:
No folder starts playing just by selecting.
The folder view is recognzied.
If a folder contains songs (not only other folders) those are shown and can be selected/played.
Its visible by an icon or an different font if folder are empty or contain other folders.
With the +,- buttons you go to the next, previous folder / song. This goes as fast as you press. Holding those buttons starts scroll/selecting which increases speed by the time of holding.
The I<< and >>I - Buttons expands/collapses folder.
Holding those buttons for longer collaps / expands all folders.
The Center Buttons plays the folder / song and returns to the playback view.
Lots of ideas. I hope someone appreciate them and maybe some of them can wind up in an firmware update someday. That would be awesome.
Nevertheless i love my zen.
Alexandra

Hi,
Yeah..appreciate it very much.
I'll pass this to someone here for their reconsideration.
Cheers.

Zen Stone Plus 4GB - Hiccups / Skipping with new firmware 1.01

I upgraded my recently purchased Zen Stone Plus 4GB to the new .0.05 firmware a few days ago. Ever since, most (if not all) tracks will play for ~ second, then skip back to the beginning and play fine thereafter. The problem will recur when the next track begins, either naturally on its own or if I jump tracks. I did not notice this problem with the prior firmware .0.03 (which had some EQ issues for me--EQ adjustments weren't audible while being performed, only after applied as a whole), but have not been able to downgrade back. More than once, I have tried reformatting (as FAT). I have reinstalled the .0.05 firmware (including in recovery mode). I have tried turning cue/review on and off. Nothing solves the hiccup / skipping?problem. Again, nothing will let me downgrade back to the older firmware, either. Has anyone else noticed this with the .0.05 firmware? I know several people have reported date bugs already (which I noticed too), so I'm hoping it's just Creative still getting firmware kinks ironed out. I'm a?little worried that it appears the player is no longer for sale anywhere, despite being a brand new "release." Most of my mp3's are a high quality variable bit rate, just in case that might be impacting something.

Hi JLM, am running .0.05e fine and in fact listening to it at the moment. Is there anyway you can regress back to .0.03 to test your theory? Testing a bunch of 28k CBR MP3s is an easy thing to try also.Message Edited by BlueRobin on 0-02-200802:49 PM

The New Creative Zen Stone plus with built-in spea

?i was thinking of buying the the New Creative Zen Stone plus 2GB?with built-in speaker. http://creative.com/products/mp3/zenstoneplus/?The product detail info claim a 20 hours battery life of this product. . is?this a?true claim ?2. is there any problem about the charging process of this product?because the "previous" Creative?Stone Plus has a charging and?battery life problem. 3. Or should i just settle for the Creative muVo v00 2 GB instead ?Any thoughts guys?Thanks

xmouse,
Here you go:
Firmware for Zen Stone Plus w/ Speaker
You can find any other files you need by going to "Support" and then "Downloads" on this website.
Good luck,
Dale

Firmware zen stone plus 4GB with spea

in the dropdown list when looking for the latest version of the firmware for my "zen stone plus 4GB with speaker" i just can found the "zen stone plus 4GB"..
this mean that there are no available updates for my device, or that the model with built-in speaker use the same firmware of the one without speaker?
Thanks for help!

Hi JLM, am running .0.05e fine and in fact listening to it at the moment. Is there anyway you can regress back to .0.03 to test your theory? Testing a bunch of 28k CBR MP3s is an easy thing to try also.Message Edited by BlueRobin on 0-02-200802:49 PM

Arranging tracks with the Zen Stone P

I've recently upgraded from a Zen Nano Plus to a Zen Stone Plus. With the Nano I had?Creative Zen Nano Plus Media Explorer, which allowed me to change the order of tracks?in a folder and number them automatically. Zen Nano Plus Media Explorer?doesn't work with the Stone, so any arranging and numbering of tracks has to be done manually, which is a right pain.
Is there a version of Creative Media Explorer available for the Stone Plus, or perhaps some third-party alternati've that would allow me to do the same thing? Thanks in advance.

I have the Stone (not Stone Plus) ... it doesnt have bookmarking, but it does have the ability to fast forward/rewind by holding down the skip fwd/back keys. Also (and I dont know if this is a function of my audiobook or of the player), it seems to create a .pos file next to my audiobook file, so if i move from an audiobook to my songs and then back, it picks up the audiobook where i left off.

Can the Zen Stone Plus coexist with iTun

I am a runner and I am interested in the Zen Stone Plus. I use iTunes and various iPods. How would the Zen software coexist with iTunes.
Most of the music in my library is from?my own CD's?and not from the iTunes Store. Thank you. Bob Michiel?

Yes, the softwares can co-exists with each other. However the iTunes would not work with the Zen Stone Plus.

Queries about Zen Stone Plus 2GB with built in speaker .

Hi ,
This one goes out to all friends who have?used Zen Stone Plus with built in speaker for some time ...
As stated in the box pack of giving a standby time of 20hrs continious playback ...
What is the approx backup time it offers or rather it should offer on minimal scuffling and minimum change of settings of the player?
Reply soon .
Byeee .

I haven't tested it off yet as I always charge it after one bar of the battery indicator has gone. But thought I try to use it'suntil it's completely flat this time. After listening to 4. albums and minimal playing in the menu the battery indicator still says full.

Zen Stone with Macb

Similar Messages

Maybe you are looking for