Zen stuck...in EAX screen, in ScanDisk, when removing OS....also when formatti

Zen 20 GB 2.0 USB
Won't do a thing.
Gets stuck in EAX screen on Boot-up. Gets stuck in ScanDisk on Cleanup. Gets stuck erasing OS when reloading OS. Gets stuck formatting.
Help?

Sounds like your player is faulty, unfortunately. I'd contact Creative to organise a replace/repair. Bad luck

Similar Messages

  • My iPod Touch is stuck on the screen you get when your updating from trying to update with old iTunes

         So I was trying to update my 4th gen iPod touch when it canceled the update and told me that I needed to update iTunes. So while I was trying to do so, which didn't even work by the way, I noticed that my iPod was stuck on the screen that you get when updating your iOS. The bar was about a quarter way filled when it froze. I'm not sure how to fix this or what to google to find a solution so I came here. I'm actually leaving it alone to try to see if it runs out of battery since after all it has to be wasting battery from being on all the time. Please help!
                                                                                                                                                                            - Luke

    Hey rdbreunig,
    Thanks for the question. If you issue is not yet resolved, it may be necessary to restore your iPod touch in recovery mode:
    iOS: Unable to update or restore
    http://support.apple.com/kb/HT1808
    Thanks,
    Matt M.

  • IPhone stuck on startup screen, crashes iTunes when I connect

    I'm running an original iPhone. I upgraded to v2 of the OS when it came out, and was running apps with no problems until today. Today I bought a couple of new apps. When I connected the phone to my Mac, it backed up, updated the apps, and ran fine for a while. Then I tried one of the new apps (Grocery List). It didn't run. I tried it again. It crashed my phone. I'm stuck on the startup screen (with the centered Apple logo). I've tried rebooting, but I can't get past this screen. iTunes runs fine on my Mac laptop until I connect the phone, at which time I get the spinning beachball. My phone is stuck on the startup screen, and is getting real hot.
    Any suggestions? Thanks.

    Same frustrating boat. Attempting to force a restore as I type this out. iPhone was fine all since the 2.0 update, and did the 2.0.1 update earlier today. All seemed fine throughout the day. And at the end of the day I decided to delete an app from my iPhone and then decided to restart. That's when the apple logo stayed on the screen for what seemed forever. I've noticed it taking a while in the past, but I let it "work" for about 5 minutes and still the same apple start-up screen. Tried a force restart which did no good. Now as it's restoring I keep thinking about how long it's been taking to do a backup of the phone and so I usually just skip it.
    Granted there will always be growing pains when you let hundreds of other developers all "play on your playground" at once (referring to the app store), but I can't help but feel that Apple better (great itunes just told me that the backup is corrupt) fix these problems quick as they're losing the faith of new customers and even loyal early adopters.

  • Creative Zen stuck on blank screen!!!

    I turn on my Creative Zen and it just sits on a dark screen. It doesn't turn off when I flick the switch to off. I have to hit reset to turn it off. Then I turn it on and it does the same thing, I hit reset does the same thing again or sometimes for a brief second the message Firmware Problem shows up then a dark screen or it justs stays on the creative for both to turn the Zen off I have to hit reset. Someone help me please. The online premade solutions thing doesn't work and I'm currently waiting for an e-mail back from the Creative Support. Someone Please Help Me!!!!!

    I have had this Zen for almost 2 years now and have never had a problem with it other then it freezed while trying to play music once did. Rebooted and it worked fine ever since til this problem came up. They told me to reboot in Recovery mode the is I was only able to get to it by draining my battery and plug it into an outlet with my wall charger. I did the cleanup and reboot got to regular operation of my zen it showed my battery was pretty much full I unplugged to see if all my stuff was still on it. The menu stayed for a brief second then went to the same usual stuff, dark, blank screen. And I haven't been able to it again since exceot one more time and I thought trying to reload the firmware, I did that on Recovery mode plugged it into the computer to put firmware back on but the computer recognizes the Zen as not connected. So I can't even do that so I sent them a reply back just now so I waiting to for a reply back to see what the next solution is. I just hope this can be solved without having to send it in for servicing or ending up having to buy a new one because I'm not sure if its still under warranty, I don't know how long the warranty is good for. Does anyone know? Also any ideas of what I can try while I wait for a reply?

  • Creative ZEN Xtra Hangs on EAX Screen, Recovery Scr

    Hi there. When I turn on my Zen Xtra it hangs on the EAX opening screen and when I use the Reset switch to go into the Recovery menu the menu shows up but I can't do anything, can't scroll the menu or select the option the menu starts on. I also downloaded the latest firmware for the player and when I tried to install it a message came up saying that the device wasn't connected when it was. Is there any other trick I can use to try to reformat/reinstall firmware?

    If you do some research (although I'm going to save you the trouble).. there's this thing called "percussi've maintenance" that you both can try.. where you (at your own risk of course) smack the Zen Xtra on it's side toward your hand.. just give it a good thump, that's all.. thus freeing the hard-dri've's reading head from it's stuck position.
    I bought a (supposedly broken) Zen Xtra on ebay for 60 bucks because of the issue you both have explained, and I got it working within thirty seconds after I opened the box. What a steal I keep saying to myself!
    And if you happen to have the issue where you boot up the player and it goes from the 'Creative' screen to the 'EAX' screen, off and then on again, doing this in a continuous loop.. all you've got is a dead battery that needs to be properly charged. I bought another (supposedly broken) Zen Xtra on ebay, this time for 75 bucks, where I took the battery out, plugged in the 5V power adapter, let the thing boot up, waited until the backlight went off (it won't work unless the very minimum amount of juice is being pulled.. no backlight, usb connecting, music playing, etc.), and then dropped the battery back in while it was on.. and voila! A jump-started battery charge.
    Sorry I crammed it into so short of an explanation.. I'm in a rush.. please feel free to message me privately with any questions.. But that should do it for y'all.

  • Zen Xtra Stops Loading At the EAX Screen..

    Well the other day while I was listening to music the player froze up so I had to reset it. After taking it out of its protecti've case thingy, I went to click the reset button when the player slipped out of my hands and dropped on the floor. Now the player only goes to the EAX screen and makes clicking noises for a bit, and then transfers over to the Rescue Mode screen. I have tried "percussi've maintenance" a bunch of times... maybe I am hitting it wrong? I set the player on the table and hit the side. Any suggestions?

    Percussi've maintenance usually involves holding the player with one hand, and giving it a hard slap with the other. There is another technique described here in the Zen FAQ at Nomadness.net.
    Of course this is always a last resort, and the problem may not be jammed heads.

  • I just downloaded version 7.1.1 and my phone is stuck on a screen showing me to plug phone into computer and go to iTunes. When I do this, iTunes says my phone is in recovery and I need to do a hard restore. Doing this, it says it will go back to factory

    how can I keep my data doing a hard recovery on my phone? I uploaded newest version and phone is stuck on a screen telling me to plug phone into computer and go to iTunes, when I do this, iTunes says my phone is in recovery and I need to restore, Can anyone please help me get my phone back without losing anything?

    You shouldn't have to restore your phone to keep your data. But first press home and on button at the same time until phone shows up Apple logo an boots up normally. When the phone comes back on plug into ituens and back it up by selecting "Back Up Now". Once backed up, you can press update and install 7.1.1 and it will restore and recover all your previously backed up data. You can also press "update" and itunes will automtically back up the phoen and install 7.1.1.

  • My ipod touch is stuck on the restore picture and when i try and sync it to itunes i cant sync to itunes because i have a password on my ipod touch and i cant get to the main screen so how do i reset my ipod ?

    my ipod touch is stuck on the restore picture and when i try and sync it to itunes i cant sync to itunes because i have a password on my ipod touch and i cant get to the main screen so how do i reset my ipod ?

    Connecting in recovery mode will help: http://support.apple.com/kb/HT1808

  • When I open a file in Photoshop CS4, how can I resize My Open Window File?it is stuck on full screen

    When I Open a File in Photoshop CS4, How can I Resize My Open Window File? It is stuck on Full Screen?

    Which operating system are you using?
    On a windows os, usually one can just double click on the title bar in the open dialog.

  • I have snow leopard installed as an OS.  When trying to reboot a MacBook Pro I am getting stuck on grey screen with apple logo and rotating symbol.  What can I do?

    I have snow leopard installed as an OS.  When trying to reboot a MacBook Pro I am getting stuck on grey screen with apple logo and rotating symbol.  What can I do?

    Maybe this might help.
    http://support.apple.com/kb/TS2570

  • My iphone 5S is stuck on a screen displaying the itunes symbol and a charging cable. I tried connecting it to itunes and updating it to the new software, and backing it up but it keeps saying unknown error 4005, Also when I first tried backing up my

    My iphone 5S is stuck on a screen displaying the itunes symbol and a charging cable. I tried connecting it to itunes and updating it to the new software, and backing it up but it keeps saying unknown error 4005, Also when I first tried backing up my phone on my computer it would begin the processes then half way through it would say IPHONE has been disconnected, now it won't recognize it or anything. what can i do? This is a brand new phone!!!

    Hello jraff21,
    I was able to locate a support article for the error you mentioned. The following steps may help you get your device back to working order:
    iOS: Restore errors 4005, 4013, and 4014 - Apple Support
    You may see one of these messages if the device unexpectedly disconnects during the update or restore or iTunes couldn't tell the device to go to the restore state.
    The iPhone [device name] could not be restored. An unknown error occurred (4005).
    The iPhone [device name] could not be restored. An unknown error occurred (4013).
    The iPhone [device name] could not be restored. An unknown error occurred (4014).
    Try these steps to resolve the issue:
    Install the latest version of iTunes.
    Restart your computer.
    Make sure your computer is up to date. If an update requires a restart, check for updates again after you restart.
    Restore using another USB cable.
    Learn more about updating OS X.
    Learn more about updating Windows.
    Restore your device on another computer.
    If you continue to see error 4005, 4013, or 4014 when you restore your device,contact Apple for support.
    Learn more about other update and restore errors.
    Thank you for contributing to Apple Support Communities.
    Cheers,
    BobbyD

  • Zen Neeon - Stuck on charge screen and not recogniz

    Hey there,Purchased my Zen Neeon only 20 days ago, but last night I left it hooked up to my computer, and turned my computer off. Today when I booted up, it said new USB device found, followed by unknown device, I looked at my Zen, and it was on the charging screen. With no option in windows to safely revome, I unplugged it, and it remained with the charging screen on. When the power button is held in, nothing happens and the charge screen remains. Any ideas anyone? Or is it broke already :\.

    I have somewhat the same problem. My Zen went dead and i tried to charge it. But then it couldn't charge and it wasn't recognized by the computer at all. The screen only displayed "creative". So i left it to charge over night, and the next morning the only difference was that the Zen was heated up. So, its still dead and i can't seem to fix it, cause it doesn't seem to be detected by the firmware. i'm dying without my zen! help, please?

  • My iphone 4s is stuck on lock screen it will not respond to myfinger to slide it open but it responds to my finger when itouch the on screen home button ......

    my iphone 4s is stuck on lock screen it will not respond to my finger to slide it open but it responds to my finger when itouch the on screen home button ......

    Hello samayaa,
    Thanks for using Apple Support Communities.
    Have you tried either restarting or resetting your iPhone?  If not please do so by following the directions in the article below.
    Turn your iOS device off and on (restart) and reset
    http://support.apple.com/kb/ht1430
    Take care,
    Alex H.

  • Device stuck on initial screen when turns on

    I picked up my tablet yesterday. This morning i realized that it wont get recharged if it is OFF. So i put it to recharge with the power ON, after  the charge was complete, i turned it OFF. After a couple of hours i turned it ON again and it got stuck on the initial screen that says "blackberry playbook" and a bunch of circles on the background changing colors. I turned it ON and OFF several times but it did the same, basically it is locked in that stage. Please advise.
    Solved!
    Go to Solution.

    Hold down the power button for at least one minute, or until it turns off.  If that does not work hold down the volume button, next to the power button, and then the power button until it turns off.
    Mine did the same thing attempting to update.
    When it shuts down, leave it off.  Get the latest version of desktop manager on your computer.  Run it on the computer, then plug the playbook into the computer.  It should wake up and allow you to update to version 1705, or the latest, assuming you did not get that far.  When done power it down and back up to complete the install.
    On wake up it may not allow you to connect to your wireless network, and be stuck at that screen.  Make it open and publ, or go to a place where there is an open public wireless network.  Then connect, complete the setup process and do the bridge connection to your blackberry.
    As yet I have not been able to figure out how to get it connect to a protected network, but the unit is working.  For network access I am using the bridge network connection for now.

  • Hello, I have an iPhone 4s, I noticed that when I am on a call (Phone) and I am done and I go to hang up, the iPhone is stuck on the screen and can not get new calls

    Hello, I have an iPhone 4s, I noticed that when I am on a call (Phone) and I am done and I go to hang up, the iPhone is stuck on the screen and can not get new calls or call to a new call

    Is there a case on the iphone?
    If so, then remove it and see if that solves it.
    Otherwise, make an appointment at the genius bar.

Maybe you are looking for

  • Mac file name restrictions/special characters

    What are the Mac OS file name restrictions? What are the special characters to avoid? Is this a legitimate file name? Are the colons allowed? /Users/Joe/Desktop/MyDocument 3:2:06.xls   Windows XP Pro  

  • Collection Override: how to get collections instead of arrays from UML

    Has anybody sucessfuly used the Collection Override property for Java code generation from UML using JSE8?? I have a simple case where class A has many class B. I want to get a Collection/List of Bs from A (public Collection<B> getBs(); ) and not an

  • Active Directory Certificate Services

    Hello, I have an issue with CRL and delta CRL which I cannot publish the errors are: 1. Active Directory Certificate services could not publish a Delta CRL for key 0 to the following location: ldap:///... operation aborted 0x80004004 (-2147467260)

  • RE: (forte-users) XML and XSL in Forte

     

  • Group Assignment and Analytics Visibility

    Hello, We are thinking of using the Group Assignment feature in On Demand. However, I have not found documentation on how this affects Analytics reporting visibility. I see the options for Manager, Team, and Full Visibility for Analytics. However, I