Zen touch 40gig docking probl

When I plug ig my zen touch it just going in and out of docking and will not stay docked. I have the latest firmware installed. I have reset it a few times and that will not work. I have tried everything I can think of and nothing works. Anyone know why it will not stay docked?

i am having the same problem right now.
i plug in, the computer recognizes it, gives me the autoplay popup. i open mediasource and my computer tells me there is no player connected, same thing with wmp0.
help out?

Similar Messages

  • Creative Zen Touch USB Docking Probl

    Hi and thanks for looking:
    I was trying to dock my Creative Zen Touch a few minutes ago, the way I usually do:
    . I have Creative MediaSOurce open
    2. I plug the USB cable into the Zen
    3. It's docked.
    But that didn't work. The "DOCKED" screen came up on my Zen for about 2-3 seconds, then went away and went back to Now Playing. Now, this sometimes happens, but if I reset the MediaSource software and plug it in again, it is usually all set, but no. I've tried over 20 times, with different USB cables too, but I just can't get anything to dock. I'm going to try on another computer and if I can get it to work, I'm planning on backing up everything I have on it. I don't want to reset my 3000 songs that are on my Zen, so if anyone has any solution to this problem, I could really use some help. Thanks!!

    well with my micro, logging off other users and removing other background programs, real player etc.. sometimes seemed to help. try restarting your system.
    I believe that recently rolling back from WMP affects the vision

  • 40gb Zen Touch not docking. PLEASE HEL

    I recently got a new 40gb Zen touch. When I plug it in via USB the computer recognizes it and it is listed in the device manager? but Creative Media Source won't show that its docked, therefore I can't transfer any music on it via media source. I've tried every thing includng changing the usb preferences etc but still nothing. Please can someone help. I'd be extremely grateful!?p.s I have windows media player 0. Thanks.

    There is a huge thread on this issue on this forum already. I think some of it is referenced in the "sticky" section at the top of this forum.
    Bottom line is try to install all the new stuff; driver, Mediasource, Mediasource Plugin for Playsforsure, etc..

  • Zen touch speakers / dock

    I was just wondering what different speakers or docks there are that are compatible with the Zen Touch? The best one available appears to be the Cambridge Soundworks playdock, but this is only available to US customers.
    What docks or speakers are available in the UK for the Zen Touch?

    Okay, if you want one that doesn't use battery but a power cable, then you would still need to connect to a socket, so not as portable as the Travelsound is.
    The speakers listed under 2.0 are all fairly small (especially ones like the SBS Vivid 60), as they are just 2 speakers and a power adapter (no subwoofer).
    http://us.creative.com/products/welcome.asp?category=4&
    (near the bottom of the page, 2.0 speakers)
    Cat
    Message Edited by Catherina-CL on 07-29-2005 0:32 AM

  • Zen Touch first-charge probl

    Hello,
    I have received a Zen Touch, and I plugged it in to charge it for the first time, but no battery meter appears to tell me how it is charging. When I turn it on while it is plugged in, the icon at the upper left is the plug only, which means that it is simply running off of external power...nothing about it being charged. Any help would be appreciated, maybe some of you have suggestions or stories about your first charge. The player works fine when it is plugged in, but it doesn't appear to be charging.

    If your battery isn't charging you should first try resetting the player. If this doesn't help then try running a disk cleanup. For the Zen Touch: To access the Rescue Mode hold down the play button and KEEP it held down, press the tiny reset switch once, and KEEP the play button held down until the player boots into the Rescue Mode. Choose Disk Cleanup from the menu. For the Zen Micro: To access the Rescue Mode on the Zen Micro, remove the battery, hold the power switch to the "on" position, reinsert the battery. Choose Disk Cleanup from the menu.
    If this still doesn't help then connect the transformer to the wall socket, and the Zen to the transformer. Then turn the wall socket switch on and off several times. The power spike *might* jump the charging circuit.
    If this still doesn't help then contact Customer Support.

  • Thank you for guidance on Zen Touch power failure probl

    Hi
    Just wanted to say thanks for the help i found here when my Zen Touch's power button was lit but nothing was on the screen and it wasn't responding to anything i did!
    I was literally really freaking out that all my music would be gone and i'd have to buy a new one (really can't afford to) when i thought to try online and see if anyone else had had this problem and found some people had and that they'd pressed the reset button with a paperclip and that it had solved it - with breath held, i tried this and it worked so thank you all very much - Phew x4000!!
    LisaMessage Edited by lisamclisa on 03-24-200605:4 PM

    Ouch, very unfortunate timing for a PC crash/freeze.
    If the player won't even go into Rescue Mode at all, then there is little else you can try. It would be best to contact Customer Support anyway to see what they advise, and to see if there's anything they can do to assist you.
    Cat

  • Zen Touch + P4S = only proble

    I have upgraded my Zen Touch (40GB) with firmware PlaysForSure and so far I have only problems:
    )I made back-up from Nomad Explorer, which I used before, but it stores only song without folders. Now I want to import theese songs to Zen. Do I have to create folders manually and search for long hours which song is from which album? Or is there an easier sollution?!
    2)Is it impossible to copy/move songs between folders in Zen Touch? I think so...
    3)And finally my Zen Touch with P4S software was not recognized at my friend?s notebook despite she has Windows XP (SP2) and Media Player 0. "With P4S you don?t need any other software" is written on Creative web page.
    Do you have the same problems? Can you help me with this? Thank you, Jan

    Can you try loading the firmware from another PC? It is possible there is a (hardware) problem with the unit though.
    Cat

  • Zen touch intermittent transfer probl

    Hi, just bought a 20gb Zen touch, and I am getting errors when transfering mp3's via Media Source.
    I have installed the latest firmware and drivers. It seems to transfer between 800-000 files ok then errors with "Player either not connected or busy - please try later" I have reset the player, formatted the dri've, in fact tried everything in the rescue menu. I have also loaded the software on my laptop and get the same
    problem. Do I have a faulty Zen? Cheers.

    If you were the only person to encounter it then I would say you had a faulty Zen, but others have had it with other players also. There's lots of connection troubleshooting advice here in the Zen FAQ at Nomadness.net, some of it relevant and some of it not.
    I would personally buy a known good USB card for the desktop PC i.e. Belkin or Adaptec, and see if that solves it. It's not a particularly great solution, but it will tell you straight away if the issue is the USB chipset. Try and buy the card somewhere you can return it if it doesn't help.

  • Zen Touch 20G Power Probl

    About two weeks ago I purchased my Zen Touch mp3 player to replace my iPod mini. On lunch from work today, it suddenly powered off when I went to push the <- (Back) button, with a sharp clicking sound through the headphones. When I went to power it up, it came up, but as soon as I pushed the 'Menu' button, it did the same thing (clicking sound and all). Now it's not powering up, at all. The power button isn't lit, and it was at full battery at the time this occured. Any ideas ?

    Nikko,
    Aside from what brotsalami mentioned (which is a very important point), check out this knowledgebase case for more ti
    ps.
    Cat

  • Zen Touch has connection probl

    Hello,
    I have my Zen Touch for about a month now, great thing, but now I have a irritating problem. Everytime I connect my Zen with the USB cable, and I want to open 'this computer' it doesnt do anything, except for showing the little flashlight
    http://img474.imageshack.us/img474/650/flash7qn.jpg
    When I open 'creative mediasource organizer', click on 'import tracks', then 'this computer' wont open also. Can anyone help me because on this way I cant do import songs to my Zen anymore.
    best regards,
    bram

    No bother!
    Connect your player up to the power source, as if you were going to charge it. Make sure it is turned off! There's a wee hole on the side of the player, near the 'random' button. Push a paper clip down that and hold the 'play button until the screen wakes up. You should now be in recovery mode. Now scroll down to 'clean up' and there you have it! It doesn't take too long. When you connect it up to the computer next, it should update the library information- just click on my computer when it's back to normal and you *should* be ok...

  • Zen Touch 40Gig Freez

    Hi! I just got a Zen Touch for Christmas. I put about 200 songs on it that day through WMP and by dragging and dropping songs into the harddri've folder. Before putting songs onto it, I tried to update the firmware but it said no device was detected. The Touch says that it's 2.0.05.
    Out of the 5 times I've tried using it over the past two days, it has frozen 0 times. I have to reset it within 5 minutes almost every time I turn it on.
    Any ideas? I bought it from a guy who had no problems with it and when he sent it to me, he said it was in perfect working order. He said that it's never frozen on him.
    Would any of the firmware fix the problem? I've started going through my tracks and any time it freezes on a song, I delete that song. That seems to help because it doesnt seem to hang on 75% of the songs.
    Any advice would be very appreciated! Thanks!
    -Kelly

    Hi! As you suggested, I updated to the newest firmware: 2..0. For awhile it seemed to play perfectly. You said that the songs could be "faulty"... that seems like it could be the case because only some songs consistently cause it to freeze. These songs play perfectly in Windows Media Player, however. Is there any rhyme or reason to why some songs just won't play on my Zen when they were all ripped from my CDs and synched the same way? Should I only synch a few songs at a time?
    Sometimes this is what happens instead of outright freezing: If i play song A it is fine but when i play song B occasionally bits of song A cut in and out. Would this be a hardware issue? Again, it is only about 3% of the songs.
    Thanks SO much! Everyone says that the Zen Touch is the best MP3 player! I really want to see that become a reality for me!
    Thanks!
    -Kelly

  • Zen Touch skipping/mashing probl

    Hey guys, i've had my zen touch for about 3 years, um its been working fine for the past while, and than when i took it on a plane, i started it up and it plays fine on most songs but on like /4 of the songs it will skip frequently and mash or skip to other songs for a couple seconds than return to the same song, and do it again shortly after. Any ideas guys?
    Thanks,
    Landon

    Try to perform the recovery mode on your unit and see if it works then.
    Good luck.

  • Creative zen touch 20gb installation proble

    i've had a look through the forum for help, so apologys if this has been posted else where. Ive just got myself a new laptop and have installed or should i say tried to install the software for my zen touch from the installation disc, bearing in mind this worked perfectly on my old laptop. i've?installed it from the disc, the problem im having is its saying my music libary is corrupt, but i've not got any music libary loaded on the pc, also is says i should download Microsoft Jet 4.0 Database Engine Service Pack 8 :smileyindifferent: any idea what thats for ? it wont even recognise my touch is connected !?i have got windows media player installed where as i had wmp 0 on my old laptop, could this be a problem ??im at a loss as what to do, i thought installing from the disc should be straight forward like it was the last time i did it, but alas no ?any help very appricated.

    Pob wrote:
    Hi folks,
    My old computer running XP recently gave up on me and I now have a new computer using Vista.
    I have lost the cd I got with my Zen Touch as it was over 5 years ago now but it still works perfectly!
    I want to set up Creative Media Player on Vista so I can start transferring music again but I have heard that if I download the firmwear I will lose all the songs that are currently stored. I really don't want this to happen as most of my music was contained on my old PC and it will be very hard to locate it all again so if there was a way I could just set up Creative Media Player the same way I had it before, without losing all my current music, that would be great!
    Any help much appreciated.
    Thanks,
    Pob
    This should get you going? http://mrinternet.wordpress.com/2007...ether-finally/

  • Zen Touch, USB Connection Probl

    Ok, i just purchased my Touch today and just fooling around with it,, it seems great, until...... i tried to connect it to my computer.
    I first installed the CD and then rebooted, after that i plugged it in and all i get now is a "unknown device" listed. I clicked on it and then tired to update the driver with the CD still in the dri've but it wouldn't find what i need.
    Is there a driver that i need? All i can see that comes with the cd is the Nomad Explorer and some manuals.
    As for the install section i didn't install the Media Source as i have a Audigy 4 Pro, so i have Media Source installed already. But even opening MS nothing happens.
    Any ideas? lol,, i love spending 500 bucks and having to spend 2 days trouble shooting to make it work.

    Ok i installed it and it still didn't work... So uninstalled everything and then reinstalled it all allowing Media Source to install.
    The error message that comes up is this:
    "One of the USB devices attached to this computer has malfunctioned, and Windows does not recognize it."
    Then it gives my USB Root Hub (6 ports)
    and on one port it has UNKNOWN DEVICE. If i click on that device i can get to the point where i can install drivers but where would i find these drivers? The only Driver folder on the CD has .exe files not .inf ?
    This is annoying and confusing.

  • Creative zen touch 40gb docking sys

    hello
    does anyone have a docking system compatibility list for this system?
    thanks

    I have the same thing, and I have yet to find any docking stations. Tell me if you find one though, because I'm totally interested!

Maybe you are looking for

  • Just upgraded my mail to iCloud. Now I'm missing yesterday's mail

    I have three apple computers and a pile of mobile devices. I have now upgraded my iMac and MacBook Pro to Lion, mostly without incident. But the other day, my wife couldn't find three days worth of mail on her iPad. Now I can't find any of yesterday'

  • OCA Certification Inquiry

    Hi, I am preparing to give OCA certification. And this may sound to be a stupid question but I have a doubt. OCA certification as a whole consists of two parts right 1Z0-051 - SQL Fundamentals I 1Z0-052 - Oracle DBA Fundamentals I Are the above two s

  • Flash audio in captivate

    I have imported some flash content with audio into my captivate presentation. The flash content is on slide 5. When I publish the captivate file and play it in internet explorer the audio from the flash content plays on the first slde. Is this a comm

  • Help  I cannot open any of my pages documents!

    Please help.  I have used pages so that I would have my documents sync to all my devices.  Now I can't open my documents. I need access to my documents.  What can I do?  Can I uninstall the new pages update?

  • Another problems

    After upgrading my KDE, i couldn't run Noatun, Juk, KMplayer, basically all the applications under multimedia menu...i don't know if this is related to my sound problem basically in terminal i type "kmplayer &" or "noatun &" and i get the same output