Zen Touch and Windows 7 64Bit

i cant find drivers for Windows 7 64 Bit any ware else
windows drivers does not take the device whn i plug it in..
firm ware version is.0.03?
Please help on this regard as sence i have updated to W7 i could not use my Touch
Regards

zen touch doesn't need the driver on windows 7.
you can download the lastest firmware for it and upgrade it on windows xp.
that should solve the problem.

Similar Messages

IPod Touch and Windows Vista 64bit

I got a new IPod Touch and when I try to connect it I get a window with this message:
"This iPod cannot be used because the required software is not installed. Run the iTunes installer to remove iTunes, then install the 64-bit version of iTunes"
Where is the 64-bit version!!!!!!!!

No 64 bit version yet. I got multiple iPod Touch devices for my family for Christmas last month from the Apple store. I asked in the store if they would work with 64 bit Vista and was told yes. The box says Vista. I'm considering trying to get them to take them all back, since all my machines in my house are Vista 64 bit.
To the people that point at the iTunes compatibility list: well, that's not printed on the side of my iPod box, and was told by the Apple guys it would work.
To the people that say 64 bit Vista doesn't work with many programs: Find me one. As all of my companies 383 apps certfied on it, and everything I run at home works just fine.
It's been out OVER a year (XP 64 bit has been around for YEARS). Come on Apple! Give us a 64 bit driver!

Creative Zen Touch 20GB - Windows Vista

(Creative Zen Touch 20GB - Windows Vista6 Hi folks,
My old computer running XP recently gave up on me and I now have a new computer using Vista.
I have lost the cd I got with my Zen Touch as it was over 5 years ago now but it still works perfectly!
I want to set up Creative Media Player on Vista so I can start transferring music again but I have heard that if I download the firmwear I will lose all the songs that are currently stored. I really don't want this to happen as most of my music was contained on my old PC and it will be very hard to locate it all again so if there was a way I could just set up Creative Media Player the same way I had it before, without losing all my current music, that would be great!
Any help much appreciated.
Thanks,
Pob

Pob wrote:
Hi folks,
My old computer running XP recently gave up on me and I now have a new computer using Vista.
I have lost the cd I got with my Zen Touch as it was over 5 years ago now but it still works perfectly!
I want to set up Creative Media Player on Vista so I can start transferring music again but I have heard that if I download the firmwear I will lose all the songs that are currently stored. I really don't want this to happen as most of my music was contained on my old PC and it will be very hard to locate it all again so if there was a way I could just set up Creative Media Player the same way I had it before, without losing all my current music, that would be great!
Any help much appreciated.
Thanks,
Pob
This should get you going? http://mrinternet.wordpress.com/2007...ether-finally/

Creative ZEN TOUCH and Macs, plz h

Hi,
I am considering buying a Creative Zen Touch and would like some help
I was wondering if anyone could answer this for me, and yes, I have the read the FAQ and about Macs and how it isnt officially supported, yada yada
What I would like to know is, I have a PC at home which I will use to transfer music
HOWEVER
At Uni'versity, I am forced to use a Mac computer. What I want to know is, I would like to use the Zen Touch as a portable hard dri've so I can copy my homework (not mp3s, but school work) on to the Zen Touch, then go to Uni'versity, plug in the mp3 player into the Mac and access my DATA files from the Mac WITHOUT having to install any software (i.e. plug n play)
Thanks,

peterh85,
I'm afraid you can't. The player will need driver and application installed in order to link up with the computer for file transfer. Even when MTP firmware is available, you will need to be using Windows XP and Window Media Player 0 to interact with the player.
Jason

Develop software for connecting to creative zen touch and other devices not recognized by wind

hi there,
as a programmer i wonder, is it possible to obtain information of how to connect to usb-connected creative device (which is not recognized automatically by windows, as the zen touch) and how to communicate with it's is there any documentation about that available to "non-creative" ;-) developers?
the idea is to create a plugin (e.g. for musikcube) that enables the programm to access the files on the device.
i know there are third party companies that do provide software for connecting to e.g. zen touch, but i do not think that they have figured out every little bit by themselves, have they?
greetings and thanks a lot
asdf

Try this:
Download <a href='http://www.delldjsite.com/forums/attachment.php?attachmentid=444' target=_blank>this[/url] file. Extract it to whatever folder you like. Inside that folder run the file fixup.cmd. A DOS window will open up and start display messages on what its doing, when its done it will instruct you to remove the device from Device Manager and reconnect it.
Try this and see if it works.

Itunes does not recognize my iPod Touch using Windows 7 - 64bit

Itunes does not recognize my iPod Touch using Windows 7 - 64bit. Is this a driver issue? Has anyone else had this problem? Is there a fix?
Message was edited by: Mark DiGiacomo

hi sally,
see if this user tip by Yorkwill helps:
+In the end what works is to just force the drivers on what windows thinks is a camera, i.e. to ‘update’ the device to use the correct driver. There are some hints on how to do this already listed on this forum, but I’ll try to give some more detailed information:+
+1. First off you need to have iTunes installed and the ipod touch plugged in+
+and recognized as ‘something’ e.g. digital camera (it shouldn’t really+
+matter what it’s recognized as, but it needs to be found by windows).+
+2. Search for usbaapl in the C:\WINDOWS system folder:+
+o open windows explorer (e.g. Right-click Start and then click ‘explore’)+
+o right-click the WINDOWS folder and select ‘Search’).+
+o type in usbaapl and hit Search – try to ignore the dog!+
+You should find the driver info in a sub folder of+
+C:\WINDOWS\system32\DRVSTORE e.g. C:\WINDOWS\system32\DRVSTORE\usbaapl_A65621D65F5B7507DD7B22331826547BDD2D206B+
+Remember that location (either leave the search box open or copy the folder+
+name into note pad – you’ll need it later)+
+If you don’t find usbaapl.sys, usbaapl.inf etc. then your drivers have not+
+been installed with the iTunes install and you’ll have to reinstall iTunes.+
+3. Locate the ipod-camera device:+
+o Open the device manager, e.g. using Start > Control Panel >+
+Performance and Maintenance > System > Hardware Tab > Device Manager+
+o Look for a device called ‘ipod’ - if your ipod shows up as+
+‘digital camera’ it will be under something like ‘imaging devices’.+
+4. Update the driver:+
+o Right click the ‘ipod-camera’ in device manager and click on+
+‘Update Driver’ – the Hardware Update Wizard will open.+
+o Check the ‘Install from a list or specific location’ then click ‘Next’+
+o Check ‘Search for the best driver in these locations’. Un-check+
+‘Search removable media’ and check ‘Include this location in the search’.+
+In the text box below type (or better copy and paste) the folder+
+containing the ipod driver information found in step 1 (in the example+
+above it was C:\WINDOWS\system32\DRVSTORE\usbaapl_A65621D65F5B7507DD7B22331826547BDD2D206B), +
+then click Next.+
+You should now see something like ‘Apple ipod device driver’ or so. Continue+
+installing that device. Once the driver has been installed the ipod will come+
+to life and iTunes (if you have it open) will show it.+

Transfering file between Zen Touch and sl

I have got Zen Touch and loaded that with lots of song collection. Now got a sleek and want to transfer those files to Sleek directly from Zen (this will save lot of time)
Any one have any idea how to do it's

The actual problem is as follows...Whenever I open Creative media source (even without connecting Zen Touch or Sleek ) I am getting the following error message' Your music library is corrupted and cannot be restored. Media source will now revert to your most recent back up file. Do you want to continue'. If I click yes I get another message 'You have no available music library. Mediasource will create a new library'. If I click yes another message' Your database engine is corrupted. You need to install Microsoft Jet Engine 4 Service pack 3. Available from microsoft website. ..'
What should I have to do?
I also have another problem. When I tried to rip audio CD I am not abpe to do it. I get the following error message 'CTMS.exe has generated errors and will be closed by Windows. You will need to restart. An error log has been generated.'
Any Advice?

Solution Center problem with HP Office Jet J4550 and windows 7 (64bit)

Hello All,
I have a problem. I have the Solution Center and a HP Office Jet J4550 and windows 7 (64bit). When ever I open the solution center, the solution center says " HP office jet J4550 series disconnected" When I open HP document manager, I can access the printer. Additionally, when I run the HP Print Diagnostic Utility 4.0, it sees the printer, no issues. I can print test pages. No issues. I downloaded the latest driver from the HP site (OJJ4500_Full_13, 299,359KB) Your insight is appreciated.
Thank you
Roy B

I have a similar problem with the J4580 and my new Windows 7 64-bit laptop. HP Solution Center says that the printer is disconnected. Furthermore, it can print some documents (short ones), but it was unable to print a 1-page 5MB pdf file. The printer truncated the page after printing just the top 10%. The printer is OK with my wife's Windows 7 32-bit laptop.
I've seen many other people complain about similar problems in this and other forums. Apparently the driver for J4500 printers is not compatible with Windows 7 64-bit. Can HP please provide an updated driver or patch?

Ipod Touch and Windows 7 sync/visibility issues Issues

Hi All
Just wondering if anyone knows when Apple intend to fix the ongoing problem with Ipod touch and windows 7 sync problems.
I have just got windows 7 64 bit from Vista 64 Bit. I had no problems before the clean install.
Now I have to close my pc down before I attach my pod for sync, when it shows up on itunes it only syncs twenty or so tracks before it "times out" the pc freezes untill i cancel the sync on the ipod and disconnect it.
I have tried like many other people to re-install itunes the latest version 9.02 (i think). I have also ran the diagnsotic check from itunes and that just shows that no Ipod is connected. Itunes itself runs and downloads ok.
This is my latest diagnostic chec
Microsoft Windows 7 x64 Home Premium Edition (Build 7600)
Packard Bell ixtreme M3720
iTunes 9.0.2.25
QuickTime 7.6.5
FairPlay 1.5.23
Apple Application Support 1.1.0
iPod Updater Library 9.0d11
CD Driver 2.1.0.0
CD Driver DLL 2.1.1.1
Apple Mobile Device 2.6.0.32
Apple Mobile Device Driver 1.45.0.0
Bonjour 1.0.6.2 (118.5)
iTunes Serial Number B5B9F9xxxxxxxx
Current user is not an administrator.
The current local date and time is 2009-11-20 23:26:31.
iTunes is not running in safe mode.
Video Display Information
NVIDIA, NVIDIA GeForce GT 220
** External Plug-ins Information **
No external plug-ins installed.
** iPod/iPhone Connectivity Tests **
iPodService 9.0.2.25 is currently running.
iTunesHelper 9.0.2.25 is currently running.
Apple Mobile Device service 2.50.39.0 is currently running.
Universal Serial Bus Controllers:
Standard Enhanced PCI to USB Host Controller. Device is working properly.
Standard OpenHCD USB Host Controller. Device is working properly.
No FireWire (IEEE 1394) Host Controller found.
Most Recent Device Not Currently Connected:
iPod touch running firmware version 3.1.2
Serial Number: 9C8xxxxxxx
** iPhone/iPod touch Sync Tests **
No iPhone or iPod found.
In case your wondering about administrator prefs , I have also ran it with full admin rights.
This problem seems to be ongoing, if anyone has any info, It would be appreciated.
The Truth is out there, someone from apple has to find it.
Regards
K£VLY

http://social.technet.microsoft.com/Forums/en-US/w7itprohardware/thread/38f25c1d -de67-4c74-8845-2cd3a15d8e41

Audigy SE and Windows 7 64bit hiccups when i listen music and open a picture

LAudigy SE and Windows 7 64bit hiccups when i listen music and open a picture' Hi,
PC September 2009 ->> MSI P35 Neo 2FR , E8400 , Audigy SE , Windows 7 64bit RC build 700 = crystal sound , no hangs or hiccups, worked flawless in any application
PC Octomber 2009 ->> AsRock P55 Pro , Core i7 860 , the same Windows 7 64bit RC build 700 and the same sound card Creative Audigy SE with the same drivers? i have problems when i liste music on any player.
Symptom = i listen to music and when i open any random picture/program the music hiccup/hangs for a milisecond.
i tried every driver on this site and every setting on the audigy control manager , nothing worked.
i tried to update de DirectX .... i can't find any cure to my problem
i need help please[img"]http://xtrempc.ro/forum/download/file.php?id=4035&mode=view" height="83[/img] width="54">
[img"]http://xtrempc.ro/forum/download/file.php?id=4034&mode=view" height="8[/img] width="53">
[size="">Sorry 4 my bad english

i tried even PCI Latency 64 and 96 ... no change

Problems with Zen Touch and MediaSou

I have a Zen Touch and I'm trying to figure out how to easily tranfer songs onto a PC. I've downloaded the latest version of MediaSource and drivers, but it doesn't recognize that the player is plugged in. However, the PC and the Nomad Explorer do recognize it. Unforunately, it doesn't seem that you can easily use Explorer to tranfer files onto the PC in an organized manner, nor can you use it to play tracks that are on the Zen. My Zen Touch is Version .0.03, and i'm reluctant to upgrade the firmware because I can't back up the tracks on my PC! Is there anyway around this? Thanks!

mattisb,
Did you download the Jukebox plugin (Creative Zen and NOMAD Jukebox plugin 2.00.20 for Creative MediaSource) that's meant for the Zen Touch player? If not, go to the website and download it.
Jason

Microphone , Audigy Se and Windows 7 64bit

*Microphone , Audigy Se and Windows 7 64bit's I have wasted several hours today trying to resolve this issue upto and including trawling the internet for a solution and completely removing and reinstalling drivers from disc and updating twice. Ultimately I downloaded an update from WIndows - Absolutely nothing, nada works!
I have the Mic Jack for my headphones plugged into the blue line in port - tried and tested on my system card (which works) but I consistently get Line--in Currently Unavailablke for this port suggesting that Creative are totally out to lunch on this one.
I have right-clicked and set levels, tried setting it as default, etc, etc, etc... nothing.
Has anyone succesfully got their mic to work uunder Win 7 64bit's
- Love how it says on the box that Vista nad WIn 7 are supported,,,? guess the partially bit was omitted!
I loathe wondows on any given day of the week but my Mac is currently down so I have no choice but to use this, my wifes machine... NOthiong but lost time whereas if I were on the mac I would be using that time producti'vely, with working software too I might add!
Hope someone has a fix for this because this machine is just one reboot away from going out the frogging window!!!

'sHi,
Are you using this driver? Are you getting no sound from your microphone or is nothing being recorded?
Please go to Control Panel, Sound make sure that the Microphone option is set as default and that the mic levels are adjusted accordingly, not mute.
If this is not working for you, Customer Support can be contacted using this http://support.creative.com/Downloads/searchdownloads.aspx?filename=

Install only 32bit version of AX Flash Player for IE8 and Windows 7 64bit

Hi,
For several reasons I would like to install only the 32bit version of Flash Player AX for IE 8 and Windows 7 64bit.
It was possible to do it when the installers where separated but I see no information how to do that now.
It is very convenient for me to have my 64 bit IE 8 browser without Flash that I use to browse and not get annoyed by the flash on the web and use the 32bit IE 8 on youtube, vimeo, etc when flash is necessary.
I hope the option to choose which version to install will get back if it is not possible now.
Please let me know if such kind of request should be made somewhere else as new feature or whatever.
Thank you.

That was the first thing I tried. It either works on both or disables on both versions. Something is messed with the settings as well, or has been made that way on purpose. Also the next thing I tried was to uninstall only the part residing in System 32 (leaving the one in SysWOW64) but the result was both not working after the uninstall. It remained in Programs but wasn't working anymore in both versions of IE 8. So I just put back the latest 32bit version which is not security wise..

Differences Zen NX, Zen Touch and Zen 2

Hi,
Can anyone tell me what the main differences are between the Zen NX, The Zen touch and the Zen 20GB? I've been looking into these three models for a while now, but haven't found any major differences. My main goal is to have my entire music collection on the player, and I would like to be able to sort my music on genre or in playlists. But as far as I know, all of the players I just named are able to do that. Which one would be the best one to go for?
Thanks,
Peter

The model differences are listed here.Message Edited by SSR on 0-27-2005 0:6 PM

Problems with Zen Touch on Windows Vista (64-B

When I connect my Zen Touch to the PC Vista can't find drivers so it tries to install the MTP-Driver but the classinstallationprogram have declined the installation.
http://img80.imageshack.us/img80/8555/errorhx5.jpg (sorry, it's in german)
How can I install a driver for the Zen Touch?

Noone with the same problem and an idea how to install the driver?

Zen Touch and Windows 7 64Bit

Similar Messages

Maybe you are looking for