Zen Touch/Dust and Garb

I don't know how in the world this happened, but when I pulled out my player from my backpack I came to discover that my player had cracker particles INSIDE the screen window! I searched all around my player to find how in the world could cookie and dust particles have found their way inside my player, but all I could see were the USB and headphone jacks. These openings seem a little too small for me to imagine how they could have made it in there. How can I clean it's Will I have to open up my player using the screws?!Message Edited by AmeliaB on -26-2005 07:4 PM

Try going to the retailer from where you bought the unit (hopefully at a reputed electronics store). They would probably offer the best solution. Good luck. It sounds like a real heartbreaking discovery (I know MY heart would sink if I had that problem.)

Similar Messages

  • I have recently bought a zen touch (20gb) and need help putting music on

    I have recently bought a zen touch (20gb) and i can't figure how to get music from Creative media Source to my Zen. I know how to select all tracks (i have 745) but i can't find the transfer button. If someone could help me it would be greatly appreciated.

    You can use either the left arrow or the right arrow to transfer, depending on whether you view the content of your MP3 player on the left or on the right. Creative MediaSource is so fliexible that it offers you to view your different music sources in different panels. Apparently, you you may not be aware that you can view the content of your MP3 player in the right panel. Just to to the View Menu and you can select what you want to view in the right panel.

  • Zen Touch users (and possibly non Zen Touch users) with Firmware issues click he

    i just got back from the mall.i visited the electroworld branch from which i purchased my zen. i explained to them what my problem is, at first they recharged the player in a usb port in front of me...then they also reformatted it too...told me to stick to the firmware that came with the product..the player responded and thanked them..but hr later, it blacked out again..i came back to the store manager showed him my zen ( he couldnt deny it doesnt have a problem ) and within minutes told me...they are going to give me a replacement. (the diagnosis was AUTO-OFF). they did and im very thankful. right now im charging the new player and hoping...i mean really hoping that this zen works. because im not going to waste my time again even with that warranty. if this zen is defecti've, im gonna li've with its defect..but im going to save up for the fruit's company in my next purchase..better yet why not a new pda...i can play [size="+2"]ZEN TOUCH USERS (and possibly non Zen Touch users)!!!
    OH MY GOD
    !!! I can't believe it, but after at least 5 hours of troubleshooting, I got it to work!!
    I don't know if all of these steps are necessary or not, but this is what I did in approximately this order (I'm so excited now, I'm not even sure if this is the exact order, but I'm almost positi've this is how I did it verbatim). I really, truly hope this works for everyone else.:
    ON YOUR ZEN TOUCH:
    .) Don't connect device to USB yet
    2.) Clean Disk
    3.) Format Disk
    *Don't bother with restart firmware or reboot; these options are useless.
    ON YOUR PC:
    .) Do NOT connect device to USB yet.
    2.) I did what everyone suggested and rolled my Windows Media Player to v0 (using Add/Remove programs in Control Panel), made sure I had SP2, had the latest drivers, blah blah blah. I'm not sure if this is necessary, but I also uninstalled my Firefox WMP plugin just to be safe. :smileyindifferent:
    3.) I un-installed (using Add/Remove programs in Control Panel) and re-installed my Zen Touch drivers, both my 2.0.00 and .30.03 (.30.03 is needed ONLY if you have XP Pro 64-bit edition). I'm not sure if re-installing the drivers is even necessary, but just to be safe, let's say it is. :smileyvery-happy:
    ---THIS IS THE IMPORTANT PART!---
    4.) I plugged my device into my USB port. When it prompts you whether you want to Sync the device with Windows Media Player or Take No Action, don't ignore it and close out. SYNC IT! I made the mistake of thinking that because my firmware was corrupted and my drivers weren't recognizing my Zen Touch as nothing more than a worthless hard dri've that there was no way it would sync with WMP. IT DOES
    !!! I don't know how but it freakin' does!
    5.) Open up your firmware update file and try to update again. Mine worked immediately and updated the player within seconds!
    NOTE: As mentioned on Creative's Support page, probably the only thing they were right about, your device will no longer be compatible with MediaSource. If you want to add music, you have to do it with Windows Media Player 0's Sync page now. And for the love of god, don't update Windows Media Player! It's not worth it! Winamp is way better anyways!
    Good luck everyone! I sincerely mean that. :manhappy:
    Message Edited by invisiblephrend on 06-07-2008 :32 PMusic files in it, watch movies, save medical books etc..

    I also strongly recommend that when Windows Media Player asks you whether you want to sync automatically or manually to choose the manual option. Automatic just randomly grabs music files and could likely add?music you don't want on your device.

  • Zen Touch/Vista and Slow Transfer - Any Advice?

    /Zen Touch/Vista and Slow Transfer - Any Advice?s I recently purchased a new PC with the new Intel i7 quadcore chip running vista.
    Everything running blazingly fast, except music transfers to my Zen Touch.
    Did the firmware upgrade on my old XP PC (after rolling back Windows Media Player to v0 as mentioned).
    Loaded MediaSource 5 on the new Vista PC with the proper drivers (the "playforsure" one, plus the CD burning one). Copied all my media files to the new PC using an external hard-dri've.
    I have the 40GB Zen Touch, started transferring all of my 0,888 WMA files to it (96kbps), which normally may take the better part of a day, or overnight,?on the old XP machine.
    I'm going on about 2 /2 days now (with the new PC, new firmware, new MediaSource software/drivers)?and finally it's almost finished.
    It?started out like gangbusters, song ever second or two, but with each transfer seemed to slow, now doing about song per minute!
    I've heard the 'playforsure' software slows things down...but this seems ridiculous. Is there anything I can do?

    kovach wrote:
    I recently purchased a new PC with the new Intel i7 quadcore chip running vista.
    Everything running blazingly fast, except music transfers to my Zen Touch.
    Did the firmware upgrade on my old XP PC (after rolling back Windows Media Player to v0 as mentioned).
    Loaded MediaSource 5 on the new Vista PC with the proper drivers (the "playforsure" one, plus the CD burning one). Copied all my media files to the new PC using an external hard-dri've.
    I have the 40GB Zen Touch, started transferring all of my 0,888 WMA files to it (96kbps), which normally may take the better part of a day, or overnight,?on the old XP machine.
    I'm going on about 2 /2 days now (with the new PC, new firmware, new MediaSource software/drivers)?and finally it's almost finished.
    It?started out like gangbusters, song ever second or two, but with each transfer seemed to slow, now doing about song per minute!
    I've heard the 'playforsure' software slows things down...but this seems ridiculous. Is there anything I can do?
    From the recovery /rescue mode on the player do a Cleanup>Reboot. the more files you have on it the slower the dri've may become since it's getting full. Also WMP works faster at least for me with syncing files.

  • Zen Touch sync and display probl

    I left my Touch connected to my PC with WM0 running to convert and transfer tracks to the Touch. When I came back a few hours later the transfer had stopped - incomplete with and error message (didn't make a note of it ).
    Now my it is not recognised by my PC. When I plug the USB lead in it is seen and the option window comes up. I click on the sync option and WM fires up but says that it can't find a player atteached. The Touch screen shows that it is docked.
    I can't see the player as an external dri've either.
    When I play anything on the Touch I can get as far as choosing tracks but as soon as I hit the play button the screen is different from normal. Instread of showing the track details all I get is a notice to "Add music from Library"
    I have tried a reset, and rescue mode but they have not helped.
    Can anyone give me any advice?
    Zen Touch 40gb, Version 2..0
    Track count 380.
    (Showing 22gb free - but I think that's wrong)

    Got it working again.
    Did a reset and formated the dri've - lost my music though

  • Zen Touch 40GB and Windows Vista

    Hi-
    Apologies for opening a new thread,I can see there have been others on the same subject but cannot make head nor tail of them from the search function.
    I have a 40GB Zen touch thats nearly full,I love it,its the best device I've ever had or ever will,can't speak more highly of it but my Windows XP laptop is gone , and the new one came with Vista .
    Can anyone tell me how I can either add more music? or even get Vista to recognise my device. I cannot find a driver or software anywhere that will work. so I cannot add anymore new music or even get access to what I already have
    thanks
    redgav

    $A longer-term, but one-time solution for the Zen Touch, Xtra & Micro (and a few, but not most, Sleeks & MicroPhotos) with original Creative PDE drivers and .x.x firmware (read the FAQs for more details):
    Find a PC with Windows XP (SP2 or higher) and WMP 0 (not 9, not ). Download & install the Creative PDE drivers from this site. Connect your player. Backup any irreplaceable files to the PC (the next step will reformat your player). Download & install the "PlaysForSure" firmware update (2.x.x) from this site. Restore any files you backed up in step 5. Disconnect your player & uninstall the PDE drivers.<This will update your player to MTP (aka PlaysForSure), which is nati'vely supported in Windows XP (with WMP 0 or ), Vista & 7 without any additional drivers. (MTP drivers are also available from this site for certain older versions of Windows.) WMA DRM files can be transferred via WMP; other files can be transferred using WMP, Windows Explorer, or MTP/PlaysForSure-updated Creative software from this site.
    The other post describes a kludge someone used to get an older Zen (with only PDE firmware) to work with Vista; it may or may not work. Creative does not support PDE-firmware players in Vista or 7.

  • Zen Touch 20g and PlaysForSure Firmware 2.11

    Hi,
    I have been trying for months but cannot get my Zen Touch 20g to work with Vista. I have followed to the letter the details posted on these forums:
    http://www.amazon.co.uk/review/R84R3...IN=B0002TSU2O# Was this helpful?
    http://forums.creative.com/creativel...cending&page=2
    However this firmware wont update the player. I just keep getting a message that says 'You cannot use this firmware upgrade for your player. Please download a suitable firmware upgrade'.
    I have uploaded the driver, driver version : JB3MV2_PCWDRV_US__30_03.EXE and I am using Media player 0, on an XP platform with service pack 2 installed.
    Can anyone help as this problem has already done my head in many times over.
    Thanks
    Shane

    Have you actually erased your firmware? http://forums.creative.com/creativel...scending&page= This thread here tells all the steps & has all the links. The source of your problem may be the WMP runtime file.Once you change to that firmware you cannot go back.

  • Zen Touch Connection AND Firmware proble

    after installing the firmware upgrade 2.. my player was not recognized in CMS or any other player although it was visible in the device manager and Windows says the driver is installed and works properly. I tried to reload the firmware through the recovery mode but now the installation is impossible because the computer says my ZEN TOUCH IS not connected. I tried it on different computers where my zen always worked but there as well it failed to be recognised. I read all the complaints on the forum,all the possible suggestions, tried the solution SID0053 but to no use. I really hope I will be get useful information te get out of this mess.
    Best greetings
    Gilbert Tenret

    Hello Brotsalami,
    Yes I did all you mentioned. I had already all the software you mentioned and after a difficult start it worked but then my ZEN TOUCH (what's in a name!) wasn't recognized anymore.Now I just want be able to reload the firmware but then i get the message that my player is not connected although windows recognizes it!!
    To Jason or anybody else from Creative: I would appreciate a helpful reaction from any of you.

  • Zen touch, XP and Drive

    Hi,i have Win XP SP2 and a Zen touch 20Go, but when i install the drivers (i tried those on the CD, the Net..), my computer don't recognize the player.windows' automatic installation can't find the driver, and when i go to the "device manager" there is an exclamation point near the Zen touch. I tried to install desinstall but it does'nt work.. someone can help me?Thanks?P.S: scuse me for my english...?

    Hi Guys, Creative doesn't do a very good job of explaining itself, or making it easy to find what you need. I just spent the last two days getting what I needed to make my Zen Touch (refurb from EBay) working. I zipped up what I found, and I will put the zip file on my website. **Unfortunately, I have to let it sit on my yahoo geocities account for the next 24 hours***http://www.geocities.com/chintue/ZenEverything.zip It contains:The User Manual in English (.PDF)The Drivers for XP (The one that says "install first" really needs to be installed first)The Upgrade to the Drivers for XP (Install this last, it upgrades the drivers.) [Removed temporarily] ***For the user that is having sync issues, attach the player,and then go into the control panel.From the control panel, open "System"From there, go to the "Hardware" tab.Open "Device Manager"In the list of devices, right click on the player and chose remove. Restart your system and then re-attach your device. If the system recognizes your player, use something like MediaMonkey to sync the music. Its a lot less tragic
    !!! Feel free to IM me on Yahoo! (Chintue)Message Edited by Chintue on 08-2-20070:03 PM

  • Zen Touch software and AC adaptor compatible with Vision

    I just got the Vision: M and I'm wondering if I can use the software and AC adaptor I got with my previous player, the Touch with the Vision: M.

    Hey There,???The Zen Vision M runs on a 5V DC Power Adapter running at 2.5A so i would not recommend it as it could seriously damage your battery and void your warranty. I am not a professional but this is from my basic knowledge of electronics. Hope This Hel
    ps.
    PS. If you are looking for a DC Adapter, they have many at a reasonable price on eBay. =)

  • Zen Touch 40Gb and Ctpde

    Hi,
    Has anybody experienced problems loading tracks onto the above machine
    and the CPU suddenly rockets up to 00% and Nomad Explorer grinds to a
    halt? I look at the processes and CtpdeSrv has drained my CPU power
    I have logged a call with Support but have got no response as yet.
    My firmware revision is .0.03 and have followed the instructions of rebuilding
    the library but this has made no difference.
    I don't have any plans to upgrade to the new super dooper firmware just yet
    Many thanks for any advice,
    Phil.

    Many thanks SSR
    I have downloaded the latest driver and it transfers
    data just fine.
    Many thanks for your help
    My Son says that all I've got to do now is get some decent music
    to put on it......:smileyvery-happy:

  • Creative Zen Touch Accessories and rep

    Does anyone know if there are any accesories available like a speaker system?car tuner like the ipod, any other cases apart from the one you get wihen you buy it's
    Also I have a small scratch on the silver part along side the screen.Does anyone know if this can be replaced or repaired?
    many thanksMessage Edited by GAV980 on 05-6-2005 02:4 AM

    vajacases.com has some nice cases... expensi've though.
    there are also meant to be some skins coming out from a company called (I think) Exspect at the end of May.
    There's a gizmo which lets you put your Touch into a car drinks holder, which is available at the Creative online store. There's also a Creative version of the Belkin Tunecast II, which is also available in the store, as is a Creative portable speaker system.
    Hope this hel
    ps.

  • Making the Zen Touch 20gb into a Plug and Pl

    Is there anything I can do to make my Zen Touch Plug And Play. (Where it automatically installs the hardware on a different PC, much like a USB stick and an iPod.
    This is because I haven't any money to invest in a USB stick, and have alot of college work on my home PC, with no way of printing it off or taking it to school
    It would also help with games for those boring Computing lessons, and the dreaded ITC lessons

    The closest you're gonna come to "plug & play" is the MTP/Janus firmware upgrade, but only for WinXP SP and up with WMP 0. Per the sticky thread on the upgrade (where all discussion of it should be confined), the Touch upgrade is expected sometime this month--but Creative has been missing release dates for it all year.
    Touch users have also asked for a "removable disk" mode (which the Micro, Sleek, and Zen 20GB have), which activates a data-only partition that acts as a "plug & play" dri've on WinMe/2000/XP (and needs only a widely-available generic driver for Win98SE). It's unknown if this will be included in the MTP/Janus upgrade. (There have also been requests to make the entire player MSC, or dri've-letter "plug & play"; but that's highly unlikely as it would conflict with the "Zen Patent" library system as well as MTP/Janus.)

  • Zen Touch Ca

    Hi. I've been searching the forums for zen touch cases and have a few questions about the ones discussed.
    RE: the Krussel flip case. I tend to use the touch pad a lot to switch songs, etc. Will I be able to open the case a lot to access the touch pad or is the headphone jack in the way?
    RE: the Belkin Dell DJ case. There was a link to see a picture, but it doesn't work anymore. Could anyone describe what this one looked like. Is it the drawstring one or something else?
    RE: the esxpect skin. Do these really do much to protect the player? We li've in the country and also am looking for something to try to keep dust out as much as possible.
    Any other suggestions regarding cases?
    Thanks a lot
    Debbie

    I've got the Krusell case. If you use the stock headphones or any with an L-shaped jack you're going to be fine. If you've got phones with a straight jack, you might want to use an L-shaped adapter (if there are any) because it could get in your way depending on the brand. So far I'm really satisfied with the case, it seems to be really well made.

  • Q&A Guide about ZEN Touch 2

    Hey people!
    I had time to kill, and I've been around since a while now; I now own a ZEN Touch 2 since more than 6 months. I figured out I'm able to help quite a lot of people about this device, actually (even though I don't have an astronomic number of posts), and I felt like writing a little guide about common questions about the ZEN Touch 2 could help, why not?
    First of all, this is a guide applying to the ZEN Touch 2, I don't know about the ZiiO. Maybe my tricks will work on both devices, but I can't be sure about it.
    LAST UPDATED: November 23th 2012.
    Q: Why does my ZEN Touch 2 freeze so often?
    I've got 2 theories about why these freezes happen so often: I own another Android device, which have a fairly weaker processor than the ZEN Touch 2, and it does not freeze at all. So the ZEN Touch 2 is quite powerful! But even on Android 2.2.1, it's perhaps the installed stock firmware that is unstable. That cause the problem.
    Second theory, I believe the ZEN Touch 2 don't have much RAM availible! Around 200-256 MB. What's interesting here, is that my other cellphone does have a weaker processor (600 MHz VS 800 MHz), but it also have more RAM, 512 MB! That could be the reason why the ZEN Touch 2 freeze so often, when the device is basically running out of RAM.
    Or it could be both! An unstable firmware installed, and no enough RAM. Who knows?
    Q: Okay, but how can I fix this issue?
    There's no magic way to make your device running super-fast like any other smartphone, especially if the problem is the lack of RAM, rather than the unstable firmware. The number 1 solution, it's obvious: uninstall APPs. The more APPs are installed, the more RAM they use. The more your device is going to freeze/crashe. Myself, I don't have many APPs installed, only 17 (Some of them being like 500 Ko, or even extensions or themes, that are only 150 Ko). I use my ZEN Touch 2 only for listening to music, and browsing the Internet using Flash Player. It does the job well enough.
    What you could also do, is install the APK/APP Fast Reboot Pro. I have it installed, and it free your phone memory everytime you unlock your screen, or press the widget. Extremely usefull. That'll help to prevent the ZEN from freezing, a bit.
    Well, even though I have 17 APPs installed, including Fast Reboot Pro, my Touch 2 still crash, rarely. I've been experiencing a serious issue about my ZEN booting loop, for no reason at all! Had to boot in recovery mode, and wipe the data. Which lead me to think the stock firmware can also be the problem for unstability.
    Q: How do I install APPs on the ZEN Touch 2 ?
    Since the Market is unavailible (I've tried to install it without any success. However, seems like some people managed to install it, most probably with root. I've tried, but cannot get it to work, myself), you'll have to download APK files. You have the choice to download from ZiiO Space, or from any other website. Download an APK file, save it anywhere on your SD Card, then open the built-in APP "Explorer" on the ZEN. Lauch the .APK, install it, and you're done.
    Remember to check "Enable unknown sources" on the "Manage Applications" menu!
    A fastest method, you could manually download and install "SlideME". I've used it for a while, and it's a Android-Market / Google-Play "Like". It'll work without any problem on the ZEN.
    Q: Is the ZEN Touch 2 rootable ?
    Yes it is!
    First thing first, rooting your device will void your warrantee. I did it, since I live in Canada, and I have no intention of returning the device in California if it break. I am not responsible if you brick your device doing the process, even though nothing wrong should happens. If you don't know what is Root Access, you better not doing this.
    I've used the following method. It worked like a charm.
    Install the Z4Root APK. Now your Antivirus (Computer maybe, and ZEN Touch 2 antivirus as well, if you have one) will warn you it contain a malware. Z4Root is not a virus! Simply because it perform actions that can be dangerous to your device, that's why you get a warning.
    Launch Z4Root, and press the "Root" button (Not temporary). Z4Root will do the rest automaticly! Then your device will reboot, which is normal. Don't do anything during the rooting process, however!
    If the rooting worked, you should now see the APP "Superuser" in your APP Drawer.
    You still have the option to Un-Root your device - assuming you want to return the ZEN to the store, for example - by launching Z4Root again, and press the button "Un-Root". Simple as that.
    Q: Can you install a Custom ROM such as Cyanogenmod ?
    I've tried without any success... I was hoping install another firmware would make the device as stable as it should be.
    I installed ROM Manager, but when the APP ask you to backup your current bootloader and select your device, the ZEN Touch 2 isn't in the list, so I couldn't perform the backup.
    There are more complex ways of installing another ROM, but I haven't tested those. This is becoming quite dangerous.
    I requested help on XDA Forums, but haven't got any, sadly.
    Q: The GPS doesn't work !
    Okay, so I don't know if your device really is defective, but I can tell you about my experience; I always disliked Google Maps APP, since it requires you have a Wi-Fi connection availible to use your GPS. Not pretty helpful when outside.
    What I recommend you, is to install the APP Locus (Keep that in mind: the more APPs you install, the more your device will freeze.). Free version is powerful enough. What I like about this magical APP, it allows you to download maps, so that you can view them offline (They are pretty big in size)! Download a few maps, and activate your GPS, it should seek your position.
    I believe when people says their GPS doesn't work, it's mainly because the ZEN Touch 2 GPS is really slow to find your position. Really. I first had trouble with this too, and for the GPS do to his things, this can takes up to 15-30 minutes, no kidding. And when the GPS work, it have chances to loose your position randomly.
    So yeah, sad to say that, but the GPS on the Touch 2 isn't the best. My position is find instantly on my other 600 MHz smartphone (LG Optimus One).
    Q: What is the Recovery Mode, and how do I access it ?
    You can access Recovery Mode by holding the HOME button and then turning ON your device at the same time. This menu can be really useful, and even save your device, like it did for me.
    Here are the options availible:
    - Reboot System Now;
    - Apply Sdcard : update.zip;
    This is used to update your firmware if you're still on Android 2.1. You could also install Custom ROMs with the filename update.zip that you've put to the root of your internal storage. Highly not recommended to install any Custom ROM, since these ROMs aren't customized for the ZEN Touch 2, simply!
    - Wipe Data / Factory Reset;
    This delete all of your data on the ZEN, to bring it back to his original state. For some reason, when I used this option, it kept everything that's on my internal storage (Music, Pictures..). GLAD that did. What I've lost, were the APPs I installed, and my Android settings. My APPs were all backed up, so that was no big deal. I wiped the device 3 times, and I can confirm that the data in /mnt/sdcard (The internal storage where you put your music, on USB) isn't deleted. All you have to restore is APPs (If they're backed up, that's fast) and ZEN settings.
    Also, be advised that wiping the device does not "unroot" the ZEN - Superuser APP is still there, and the device is still rooted. Notice that if you have uninstalled system APPs (see below), the APPs won't be reinstalled automatically. You'll have to reinstall them manually, if you want them back - hope you have a backup of these APPs!
    I had to use this option to stop my ZEN from booting in loop. I thought it wouldn't change anything!
    - Wipe Cache Partition;
    Wipes the cache partition of the device to clear all the data accumulated there over use.
    Thanks to Haroon Q. Raja from AddictiveTips for the info.
    Q: Would you qualify the ZEN Touch 2 as a durable unit ?
    Well, "on the outside", yes. People (Not me! :P) dropped my ZEN twice, without any consequence (That freaked me out).
    Maybe I was lucky, don't know. But durable "on the inside", the firmware and all this stuff, it's a no-no. I should you have more chance that your ZEN will die for no reason because of the firmware, rather than die because you dropped it (Well, just don't drop it in the pool...).
    Q: The stock music player suck, I have no control at all !
    What I recommend you to install (Personally) :
    PlayerPro for the look;
    PowerAMP for functionalities. I used PowerAMP, since it sort my music better. I've switched to NRG music player, since PowerAMP became glitchy, for some reason.
    Both are shareware, but since there's no access to the Market, you have no choice, but to download illegally. I apologize Creative, for approving the download of APPs, but what else can we do? Simply make the Markey availible, that will sove this issue.
    If you plan on getting PowerAMP, get it here, along with the Full Version Patch (You HAVE to be rooted for this to work! Tested, and work in my case):
    http://forum.mobilism.org/viewtopic....fdb7e20fd84c70
    1. Unistall your current version of PowerAMP.
    2. Install PowerAMP.2.0.4.467 APK (Do not run it!)
    3. Install PowerAmpPatcher by ChelpuS APK
    4. Start the Patcher, and press the button.
    5. Reboot the ZEN, then start PowerAMP. That should do it.
    Warning: You will loose all your previous PowerAMP settings, however!
    Since the ZEN Touch 2 is not a Google cellphone / has no Android Market, this is the only way to have PowerAMP all the time on your ZEN.
    NRG Music Player is pretty decent as well, it can play different formats that PlayerPro can't. Still a shareware, but easy to download and install without hassle.
    Q: Which Photo Gallery do you recommend ?
    Everyone agree, nothing is worst than the Android stock Gallery, super slow, and doesn't sort your pictures at all! Again, I have 2 recommendations:
    Grab Quickpic or Picturen. Both are extremely light (500 Ko), fast and there are a lot of zoom steps, for us ZEN Touch 2 owners without any multi-touch support! You can also hide the useless folders, or add a password to these hidden folders, if you prefer!
    JustPictures! is also excellent, as well. Take a bit more space, a bit slower, but the interface is more attractive, and One-Touch zoom is supported. Some functions that are in QuickPic aren't in this APP, but I feel like JustPictures sort my photos better. I can put differents "accounts" or "folders" to sort all my pictures.
    Screw the original 3D Gallery!
    Q: Any browser I should get ?
    That really depend on what you do...
    Read this article, from november 2011:
    http://www.tomsguide.com/us/Android-...view-1705.html
    Opera Mini is lightning fast, but unfortunately, Flash Player is unsupported on this browser!
    Note: Avoid browsing the Internet with a ZEN full of APPs, you'll get in trouble. I did this, and this was a nightmare, freezing all the time, have to reset...
    I do this now, but with my 17 APPs installed. It's quite OK, I should say. Especially that I use Flash Player a lot.
    Q: Any Home Replacement you recommend ?
    I've been using Go Launcher Ex for a while, because it's resonably fast, beautiful and way customizable; ADW Laucher is pretty fast, too. I've now switche to Nemus Launcher - way lighter (The GO Dev Team applications really are getting bloated by useless features, sadly), and still pretty beautiful. Go Launcher Ex is more customizable, but is getting bigger and bigger in size (And RAM, maybe. Not sure.). 8-10 MB or up for an APP? Even for a Home Screen, I hope you're kidding me.
    Both APPs allow you to add folders to the APP Drawer ! Excellent!
    Q: I want to disable / customize the lockscreen.
    Disable the lockscreen: NoLock;
    Customize the lockscreen: WidgetLocker.
    Q: Does the games play well ?
    Yes, pretty good, with the 800 MHz processor of the ZEN Touch 2 !
    Comparing it to the 600 MHz processor of my LG Optimus One, there really is a noticeable differece in fluidity. The vast majority of the games doesn't lag on the ZEN Touch 2, that's great.
    If you want to try those games emulators (SNES, Genesis...), go ahead, they work decently. Unfortunately, since the Touch 2 doesn't have multitouch, that's a problem, but try to set Left-Right as volume Up-Down to move your caracther, it's pretty playable and fluid enough. The best games are the RPGs, for sure, since multitouch isn't necessary at all.
    There are also 3D emulators, such as N64oid or PSX4Droid; these also work, but watch out! At that point, 800 MHz is not enough for these games to be "playable". Super Mario 64, for example, is the most playable game availible for N64oid, and still then, it is really slow (Not that enjoyable, seriously).
    You're free to try N64oid or PSX4Droid for fun, but just saying, if you want to freeze your device, this is the way to go.
    Super Mario 64 shouldn't freeze instantly your device. However, Mario Kart 64, Donkey Kong 64 or Tony Hawks (Tested) freeze your device for sure - you wouldn't even get past the "Press Start" screen. My advice: only try Super Mario 64.
    Still then, the ZEN does play games (2D or 3D) smoothly enough!
    Q: My ZEN keep booting in loop! What should I do ?
    That happened to me once in a while, and this is freaky.
    "ZEN Touch 2" screen, "Touch the Sound of Perfection screen" again, and again, and again...
    First: wait. Maybe it'll boot
    If your launcher still doesn't start, reset button (Inside the SD Card slot, very tiny) is your only choice, of course. Reset, then power it up again. It booted for me all the time, except once.
    If that still doesn't work: Recovery Mode, like stated earlier.
    Now, here's what could happen if you reset during the boot sequence; I got this extremely annoying problem like 3 times. Hooray, you can get to the launcher!
    Now, what can unfortunately happen, is that you get random popup like "SmartKeyboard Pro Force Close", this stuff. You'll keep getting these popups. That mean the vast majority of your 3rd Party APPs are corrupted, and you'll have to uninstall, then install again almost every single APP... This is a serious pain!
    Now, don't install again. It is very important that you uninstall first, then reinstall. Otherwise, it won't work. Luckylli enough, your stock APPs will remain intact (Default Music Player, ZiiO Space, Explorer...)
    Hope you don't get this problem!
    Q: The ZEN freeze at "Touch the Sound of Perfection" screen...
    I would suggest you to wait for a while; I guess it's because the ZEN is getting too hot. Reset the device so it can power OFF, and wait for the ZEN to cool down a bit (Do not reload it, unless you don't have the choice to.), and try again later. Also try to connect the ZEN to USB, it'll power ON on it's own, perhaps it'll get to the Home Screen. If it still freeze, too bad: do a factory reset (that should work).
    Q: Can I uninstall preinstalled System APPs (ZiiO Space, Audible, Default Browser) ?
    Yes, you can! I'll show you the easiest way to do it!
    If this isn't appropriated, ask me Creative, I'll remove this question.
    First, you HAVE to be rooted, again!
    Second: doing this can be seriously dangerous if you delete a APP that is required for the system to work, you could really kill your ZEN! Again, I take no responsability if you kill your ZEN because of this!
    Okay then, download the APP SDK Stock APP Removal (Thanks to the developpers!):
    http://www.google.ca/url?sa=t&rct=j&...vTHqe6KdBudQLg
    Install it (If you have an antivirus on your ZEN, it'll detect it as dangerous. Ignore it. It's normal, since the APP allow you to delete system APPs, which can be dangerous), run it.
    You can now see a list of every single APP installed on your ZEN, including the system APPs. ALWAYS make a backup of the APP when you delete one! The APP itself being extremely easy to use, no need to explain how it works, you'll understand it by yourself, for sure.
    Just keep in mind, it is your responsability to verify if it's safe to remove an APP or not! Always check!
    I used the APP to remove ZiiO Space, Audible and the default Browser (Without any consequences), since I never use those. Not sure if it's safe to delete the default 3D Gallery.
    Mainly because I want to free up the most space as possible on my ZEN to avoid freezing issues, of course!
    Q: How can I backup my APPs ?
    It's quite easy to do. I've realised backing up my APPs was very important, on the ZEN Touch 2, since you never know when the device is going to freak out, when you'll have to do a reset, and that your APPs get corrupted!
    You can of course use Titanium Backup, but I would recommend Smart App Protector / Pro, for his simplicity.
    The main purpose of this APP, is to password/pattern-protect your APP (Which does the job perfectly well), but you can also backup (on SD Card, well, ZEN internal storage) and restore your APPs extremely easilly. No root required, here!
    This APP completely saved me, when I wiped my device...
    Q: What about my contacts ?
    In the stock Contacts APP, there's an option to do a full backup of your contacts, on the ZEN internal memory.
    If for some reason, you can't find it, download the APP Go Contacts Ex (In my opinion, the best contacts APP availible). This APP also have an option to backup and restore your contacts super easilly.
    Q: In some cases, the ZEN Touch 2 isn't loud enough!
    Something I would recommend is using a different music player with an equalizer. PowerAMP + PowerAMP patcher should do the job. Open the equalizer and increase the value of the first bar on the left. You'll get a small volume boost. I do use it for some tracks that have the volume REALLY low.
    Q: The Agenda / Calendar does not work at all! When I start it, I get the message "You have no calendar" !
    Dear calendar... It's always been a pain to set the calendar on the ZEN Touch 2, since it's not a cellphone...
    2 recommendations:
    First: forget it. I've tried, and seems this is possible to get this to work, but quite uneffective. First, you should download the APP Calengoo, a more than excellent calendar. It'll sync with your Google Calendar, so try using a Gmail account, to get it to work. It seems to have troble with the sync, and it doesn't work all the time.
    Haven't done this in a while, this is seriously a pain. I'm using the calendar on my LG smartphone anyways. I won't be able to help that much about this issue.
    Second: what you could do instead, is to download the calendar Jorte. It's a standalone agenda, so it does not requires sync to work at all. It'll work without any problem on your ZEN, you don't have to set-up anything.
    However, I fairly prefer Calengoo over Jorte, way more powerful.
    Q: Where's the reset hole?
    Inside the micro SD slot. You can use a lockpipe (recommended) or a linguee mine (less safe).
    Q: Is the battery removable?
    Unfortunately, no. Unless you manage to open the ZEN in a very specific way, using a knife and a hairdryer to make the glue melt, I've read. You should probably gain access to the battery this way, but I've been completely unable to know the exact battery type (Lithium-Ion, but details), so replacing it would be a real pain. Creative couldn't help me, since they do not encourage self repair; they recommended me to purchase another device if this case happen, which I honnestly find pretty ugly.
    Q: The default Android keyboard is not good enough...
    The APK "Smart Keyboard Pro" is the answer.
    Q: I would like to quickly turn ON WiFi, and ajust screen brightness without going in the Settings all the time.
    Grab the APK "Extended Controls".
    That's it, hope this guide was helpful!

    Originally Posted by agrimstad
    This Q&A guide was enormously helpful to me with the zen touch 2, my first android device.
    I'm pretty happy with the device--everything pretty much works--but doubt my experience would have been so positive without this guide. I do have some observations as a kind of follow up.
    1. I'd recommend staying with Creative's web browser. I tried a couple of alternatives. I tried Opera and Firefox. I thought they were painfully slow. I quickly abandoned them. The default browser seems good enough. That's not really what I got the zen for.
    2. I bought PowerAmp. I had issues where it would work for a few days and then fail with licensing issues. Reinstalling fixed matters, then the licensing failure recurred. So I tried ProPlayer. To me, it's better. I like the way it handles folders.
    3. I bought Locus Pro. It's pretty good. I like the ability to download a map so you're not tied to the internet. The GPS is slow, but it does work.
    4. I did root the device with z4root. For me, the only advantage seems to be that I need to be rooted to get ClockSync to work. Being able to sync the device's clock with NTP is a really professional touch.
    5. I use Go Launcher Ex (paid version). One thing to mention is that the default launcher has a Bluetooth widget which doesn't seem to survive the installation of Go Launcher Ex. I installed another Bluetooth widget I found on AndroidPit App Center. By the way, this App Center seems pretty decent, since Google Play isn't supported. (I also use the SlideME Marketplace.)
    6. I like the Go Power Manager for monitoring the battery. It has a widget and power usage modes that are quite good.
    7. I don't seem to be having lock up problems. (Note that I only use the default browser). I think this may be due to my being really careful about RAM usage. There are a set of things I've done in this area. First, I use StartupManager. (This is a second reason to root the device.) This keeps the things running at start up to the minimum you want. I've also installed FastReboot. I run this from time to time. But there are two other things that I really rely on. One is the Go Task Manager. This lets you monitor RAM usage and kill things to recover RAM. Another thing I use is a widget--I can't remember where it came from--that displays RAM usage on the home panel and a button in the shape of a broom, which, when tapped, recovers RAM. I think this is part of Go Task Manager.
    8. It seems obligatory to have a scanner app for all the 2-D bar codes that have sprung up everywhere. I haven't seen any advice about which app is preferred. I'm using Unibet Scanner, which seems to work.
    9. Because Google Play isn't supported, I've had to get some things via googling for apks. One finds these in strange quasi legal places and I worry about viruses. I'd be interested in advice regarding a virus scanner.
    Thanks again for the guide. -- al
    Thank you very much!
    1. Maybe you want to try Dolphin Browser Mini / HD, it's pretty powerful. But if you're looking for a lighter web browser, you could give BoatBrowser Mini a shot, if you want to.
    2. I've read that PowerAMP cannot activate on a non-Google phone, which I find pretty ridiculous.. I have to patch it with an illegal app, but now I get that strange noise when my music play, and the app is basically dead, unless I reinstall and loose all my settings!
    7. That's the right thing to do. If you don't have much APPs installed, that shouldn't lock up.
    9. Same here. I've used Lookout Antivirus before, but you wouldn't be able to uninstall it, if you're not rooted. I've then switched to Zoner Antivirus (Free). Less known, but for some reason, I've read it detected more viruses than any other free Android antivirus.
    Enjoy the ZEN Touch 2.

Maybe you are looking for

  • Scale maintained in info records but not picking up in scheduling agreement

    Hi, We have maintained scales for PB00 in info record (subcontracting), this scale is picked up in Subcontracting Purchase Order. But when we are trying to create Subcontracting scheduling agreement, this scale is not picked up by the system. Why the

  • Adobe Pro 9 and TWAIN driver

    WHen scanning multiple pages from my HP Photosmart C6180 using the TWAIN driver recently installed in an Adobe update, Adobe freezes. HP say it's an Adobe issue.  Any clues on how to sort this out?

  • Suppress default namespace in extract() function

    How can I avoid that Oracle includes the target namespace of my schema as the default namespace when using the EXTRACT function? E.g., select xmlelement("XmlData", xmlagg(extract(tx.transmission, '/Transmission/Item'))) from transmissions tx returns

  • Changing color spaces/profiles

    How do I change the color profile of files that were processed using ProPhoto color space to sRGB? Thanks in advance.

  • Slit Scan looks fine in Motion preview but not when I Export to Movie

    I have a project that I finally got to look exactly the way I wanted, but when I export it to a Quicktime Movie, it's all messed up. I used the Slit Scan filter on a PSD image for the background, and it looks great in the preview in Motion, but when