Zen Touch: Freezing while opening data libr

In the last few months, I have been unable to get any of the files that I have saved onto my 20GB Zen tOUCH. I have tried on several computers now, but everytime I open the data library through Nomad Explorer, it freezes and I am unable to even copy and paste the folders. Any ideas/tips/help?!
Cheers

Do you have drivers installed in those computers you connected your player to

Similar Messages

  • Zen touch freeze

    every time i click on on the "data folder" my zen touch freezes what do i do?

    Ok...this seems to happen occasionally, first of all, make sure you've updated your firmware to the latest one (.0.03) it is in the downloads section. Will your player still play music? I would also go into Rescue Mode and run a cleanup. There might possibly be corrupted files in the folder and Nomad Explorer crashes, so you should run a clean up, back up all the music, update firmware and if worst comes to worst, run a format, hope this helps
    Wilco
    Proud owner of a Zen Touch 20GB

  • Why does reader freeze while opening some pdf files and others open instantaneously?

    I use pdf files created from CamScanner and shared from DropBox.  In DropBox, many times (over 50%) while opening the PDF the process freezes and the error message is Adobe Reader is not responding.  If you close the program, and re-open the file, it opens fine.  I have saved these files to my computer and the same issue occurs.  The files are 100-500kb, so I do not think size is the issue.  I have reinstalled Reader (11.1.10) and there is no improvement.

    This appears to have reduced the time to load a document.  Thanks Jimb      From: Anubha Goel <[email protected]>
    To: jimb70395944 <[email protected]>
    Sent: Friday, March 20, 2015 4:37 AM
    Subject: You have been mentioned by Anubha Goel in Re: why does reader freeze while opening some pdf files and others open instantaneously? in Adobe Community
    |
    You have been mentioned
    by Anubha Goel in Re: why does reader freeze while opening some pdf files and others open instantaneously? in Adobe Community - View Anubha Goel's reference to you  Hey jimb70395944, Please try disabling protected mode under 'Edit> Preferences> Security (Enhanced)' and uncheck 'Enable Enhanced Security' option.Then, try again and let me know.  Regards,Anubha
    Participate in the conversation by replying to this email
    To stop receiving these messages whenever you are mentioned, go to your preferences and disable notifications for direct social actions. |

  • Zen touch, crash while upgrade firmw

    Ok i really got a problem now....my zen touch crashed while i was upgrading to p4s 2..0
    now my pc doesnt recognize it anymore and my player keeps giving me the recovery tool.
    I am frustrated of what to do.. with regards Dobby

    ok, looooooooooong time ago, before I owned my Vision:M, I had a zen touch,ergo, this same problem. WHat I did was that I went to a friends house, and tryed intaling the new firmware there. It worked, so try instaling the firmware through another PC. The problem is that your player has NO firmware, and your PC "kinda" recognizes it. after you intall the firmware on your player, go back to your main PC and plug your MP3 player, then you should get the same reaction as before, no change yet. Then go to control panel, system, system properties, hardware, then device manager. Find your player there... I should remind you that your player must be on and pluged in at all times during this process... after you find your player (should be under Uni'versal Serial Bus Controlers), right click on it and click on Uninstall. After approving this, unplug your player, and, whitout turning it off, plug it back in.
    And that's it, as far as I know that should work for you, it did for me.
    another thing that worked for someone else in here, was that they edited the registry... THIS IS VERY RISKY, but it was waaaaaaaaaaaaay easier. He typed in "regedit" through his Run window, found his HKEY_CURRENT_CONFIG folder, then system, then CUrrentControlSet and then USB. He right-clicked the USB folder and selected "Permissions..." then he selected the "Add" button and created a user called "Everyone" and he gave IT full control and read checks and that was it, hope one of these two help you, I remember how frustraded I felt, sucks that the "Creative Team" makes such software
    Edit: I forgot, remeber that this is risky, and I take no resposibility whatsoever if something goes ape-poop
    good luck, thoughMessage Edited by bleumcnamara on -8-20060:54 PM

  • Mac Apps freeze while opening

    Hi,
    My Mac Applications are freezing while opening. Mail, Safari, Calculator, Textedit, Preview, and Mac Help Viewer all freeze up either upon opening or as soon as I try to interact with them. Other apps like Photoshop, Illustrator, MSN Messenger, IE, and Word work just fine.
    I have used Disk Warrior to reapair the HD and I have used Disk Utility to reapair permissions. I don't know what else to try.
    Any suggestions?
    Powerbook G4   Mac OS X (10.3.9)  

    Try things in Dr.Smokes Apps. Fail to Launch thread.
    Cheers!
    DALE

  • Problem: Zen Touch Freezi

    My Zen Touch Freezes at least twice a week. Is it supposed to do this? If not what should I do to fix the problem?

    The Touch does seem to be a bit more prone to freezing. Are you using WMA or MP3 files? And where are the files from? You could try the latest firmware if you don't have it already, but it causes problems with the EQ sound reproduction and breaks the ability to change the startup screen.

  • Constant Zen Touch freezing prob

    Hey all, I've had my 40 gig Zen Touch for about 6 or 7 months now, and although it used to not give me any problems at all. About 3 months ago, it started to freeze randomly. As time progressed, it went from about once a week to about once per listening session. All my files are MP3s, I have the 2..0 firmware, and have run Disk Cleanup. Yet the freezing still occurs constantly. Any suggestions to fix this problem? Thanks!

    Hi,
    Well corrupted data can be to blame for freezing but a clean-up usually resolves that. As you're still experiencing problems I'd back up your data and format the player. If you get any transfer errors from specific files during the backup then you can be pretty certain that these were the ones causing the problem.
    If there are still problems let me know.
    Hope this helps,
    John

  • Why does my entire computer freeze while opening or using After Effects or Premiere Pro CS5?

    Just built a computer to meet all requirements for Adobe, Autodesk 3ds Max, and UDK, for school.
    Specs;
    Motherboard - ASRock X79 Extreme 4-M, Socket 2011 - Micro ATX - 4 DDR3 1600/1333/1066/800 - 3 PCI-E 3.0 x 16 - 7.1 CH HD Audio - PCIE GLAN - 3 SATA3 - eSATA3 - 4 SATA2 - 4 USB 3.0 - 10 USB 2.0
    Processor - Intel Core i7 Processor - i7-3820 LGA 2011
    Processor fan - Intel Thermal Solution RTS2011 AC
    RAM - Ballistix by Crucial - 2x  8GB Tactical PC3 - 12800 CL8 1.5 VW/XMP = 16GB RAM
    SSD - Crucial M4 SSD 128GB - Comptatibility with 6Gb/s & backward compatible with SATA 3Gb/s
    HDD - Seagate Barracuda 1TB - 7200 RPM up to 32mb cache
    Power Supply - Cooler Master Extreme Power Plus 700W
    Graphics Card - EVGA - NVIDIA GeForce GTX480 - DirectX11 - CUDA - OpenCL Support - PhysX Technology - OpenGL 4.1 (so says the box it came in; but if I'm not mistaken I think the command prompt had shown OpenGL 3 or 3.2)
    Disc Driver - LG DVD/CD RW... It is an OEM, Windows claims it is updated.
    I use an external component - USB Microsoft Wireless Mouse & Keyboard 2000.
    I have, as far as software goes...
    Windows 7 64-bit SP1
    Adobe Creative Suite 5, student version or what have you.
         - I do have several plugins installed as well for After Effects only.
    Autodesk 3ds Max 2012
         -I have several maxscripts as well as a couple plugins for 3ds Max.
    UDK 2-2012 & 3-2012
    NVIDIA PhysX Lab 1.1
    NVIDIA Texture Tools 2
    NVIDIA plugin for Photoshop
    xNormal
    ConTEXT
    UnCodeX
    Quicktime
    AVG Free
    Malwarebytes
    7-Zip
    Java
    Sculptris
    As for anything else giving me issues I haven't noticed anything besides a previous Graphics Card wasn't supported very well at all with 3ds Max, it would freeze while using the material editor which was fixed with replacing a GTX550 ti with a more compatible GTX480. Thought maybe the upgrade would also solve the fact that almost everytime I go to start up and/or use After Effects or Premiere Pro CS5 my whole system freezes. Whether or not I'm doing anything, it occasionally happened during "Scrubbing" the timeline, but also during the splash load up screen. Would take the time to wait for several minutes but nothing would change. Hard reboot was needed. After countless hours of searching online I stumbled upon what is called an "Unlock" for Premiere Pro/After Effects to allow accelerated GPU and CUDA cores. Simple procedure, seems as if things go faster... When it is working. But still, I encounter freezes on my entire system. It isn't a crash back to Windows or anytihng. Just a complete freeze on the entire system. I have not extensively used other Adobe programs besides Photoshop quite briefly just so I could open menus and force a freeze within 5 minutes and noticed nothing wrong. Which in AE & PP just running through any of the menu windows can quickly cause a sudden freeze.
    note* I have alternated shutting off and turning on OpenGL as well as multiprocessing. Doesn't matter, it really doesn't seem to change much of anything.
    Alas, I am absolutely sure, after checking and re-checking 80+ hours over the past 2 weeks that yes, everything is updated as far as each individual program, software or hardware will allow me to update them. I have reinstalled Windows as well as each program up to 3 times, and 1 system (restore?) I had Windows dump everything, started from scratch, backed up nothing. To reinstall everything from scratch, while not installed several "Utilities" or software components from stuff like the Motherboard and its XFAST USB/LAN or whatever, thinking maybe it was cluttering up anything.
    Please, if anyone has any ideas upon this and could give me advice, whether you notice any other incompatibilities or anything. Any and all advice would be greatly appreciated. Thank you.
    note* I do not have a wired Keyboard or mouse to disable the USB plugin and attempt that route.. at least not yet, its on my list of things to do. Also, I did run Memtest86+ during a boot and it claims that everything there had passed 100%. I am not "overclocking" anything either. I just wanted something I could work smoothly on, that would have decent rendering capabilities. I used to use my girls' laptop which was an HP with 3GB RAM and never experienced crashes or freezes and I could use AE, PPro, 3ds Max with some lag but not any issues. Rendering took forever on it, but I usually avoided that 'cuz it would start heating up pretty fierce. Saved my rendering for school computers where I could. But either way, now I have this expensive piece and it is getting frustrating that I cannot work on it.
    note* Also, incase it does help, I have Windows as well as any major components installed onto the C: drive (aka SSD for my system) while all my secondary software, such as Adobe, Autodesk, etc. are all installed directly to my D: drive (or HDD) And everything is set up to go through Windows Firewall as well.

    Thanks all. I have just tried a few things, installing them onto the C drive as you all specified as not being one of them. I can understand it, but at the same time i have a classmate who has their software on a seperate drive and it runs smoothe. I'm on my second GPU in 2 weeks, unless I have terrible luck it seems doubtful being that I can run games and a majority of the software no problem. Through further testing around with a corded mouse and keyboard I've noticed the following...
    The computer freezes entirely only when I'm performing a "scrubbing" action or using a mouse. Left clicking, scrolling, or moving it around. Otherwise if I do not use the mouse and I make all my actions, such as "scrubbing" in AE via "Page Up & Down" keys, there's no freeze and it preloads the preview no problem.
    "Scrubbing" does not load a preview (the green bar doesn't load at all while scrubbing). But, also noticed no matter how smoothe everything is running in 3ds Max as well as PPro, once I start performing a "scrubbing" action with whatever timeline I use, it will definately freeze my whole computer, Windows and all. Hard reboot is neeed.
    With having gone through 2 GPU's, done a full memtest via Windows 7 and Memtest86+, there seems to be no issue with my memory or GPU. Like I said, I've run UDK without an issue. Whether the editor or game. The USB doesn't seem like it's the cause, I've used both wireless as well as wired keyboards/mouse. Still freezes, but now only when using a mouse to "Scrub".
    Is it possible my motherboard could be incompatible somewhere? I mean, really.. everything is brand new but 2 weeks of troubleshooting.
    And I do plan on trying to run my software off the C drive, I just wanted to make sure it wasn't something else, like I said, I've seen and used a computer where it all runs off the D drive and it runs perfectly, actually better on his computer than off the C drive at my schools. So if it is an issue would it lie within the fact that I'm using an Nvidia GPU? Considering my classmate is using a AMD/ATI Radeon or something like that.
    Again, to those who replied, your shared knowledge is greatly appreciated, thank you.

  • Ipod touch, Freezing while syncing.

    everytime i connect my ipod it syncs my music and pictures fine, but when it starts to sync my apps it syncs about 3 apps. Then my ipod freezes while syncing, forcing me to restore my ipod from recovery mode. When i say it freezes, i mean that my ipod has the "Sync In Progress" screen, with the battery in the center, and on the bottom of the screen the "Slide To Cancel Sync" on the slider. normaly the slider is always flashing highlighting a few letters at a time, across the screen, saying "Slide To Cancel" When it freezes the slider stops flashing/scrolling and then a little spinning wheel starts to spin in the center of my ipod, on the battery logo. After about, 30 seconds the wheel stops spinning, my itunes freezes up, and my iPod touch freezes up. as soon as i disconect my frozen ipod, my itunes works again. then my ipod is stuck on the frozen "sync in progress" screen. i then have to do the long recovery/restore. Then i decided change my settings from automatic syncing to selecting what i sync. I synced my music, fine. I synced my Pictures, fine. i then decided to sync one app at a time. I first synced solitaire, fine. Then i synced sextuple, fine. Then i synced Super Monkey Ball, my ipod froze!!! So I thought that mabye thats what was freezing up my ipod. then i had to restore my ipod, again. and start the whole process over again. I synced sextuple, fine. Then i Synced super monkey ball, again, and it synced fine. then i synced solitaire, worked fine. then i synced Cube Runner, My ipod froze again. on a totaly different app. i had to restore from recovery mode again, and i synced my music, pictures, super monkey ball, solitaire, and sextuple. then i decided, i will just keep my ipod away from a computer so it won't happen again. so i have 23 apps, and i only have three on my ipod. i really want to keep trying to fix this, but i don't want to have to do a restore, and then have to resync all of my music/pictures again. I really want to know whats up with my ipod. PLEASE, IF ANYONE CAN HELP, PLEASE DO SO. I WILL BE TOTALY GREATFUL. THANK YOU!!!!!!!!!!

    I have been having the same problem too. i was sick and tired of it so the i brought it to an apple store and basically just told me stuff i already know, then 2 days later it started happening again. So i went to the apple store yet again, different guy same nonsense, "let me check your battery" "let me see if you memory has problems" "don't have too many applications running at the same time" on and on.. all that happened is that they restored it and said it should work... well clearly i go home to sync it, everything freezes, i go back they give me a new one... yet here i am 3 days later still having the problems even with a new ipod. i reinstalled itunes like 6 times, restored my ipod 4 times... so basically everyone is having the same problem... i guess we just gotta wait til apple realizes that they have a big problem to fix and does something for us

  • AE freezes while Opening Project

    Been working on a project these past two days. Nothing over the top complicated in it. Animating text/solids with an audio bed.
    However this morning, while loading up the project, it froze at 33%. Had to Force Quit, try again. Nothing. I've actually taken the project file, brought it to another computer, which opened fine, then saved it as a new project, then brought it back to my computer which only let it work for about another hour - until giving me another freeze while working in the project.
    I tried resetting my preferences, Purged the memory, brought to the other computer to transfer into a new file again. No go. Keeps freezing at 33%. Please Help
    Nick

    What Michael said - more info. Could be anything from some CoDec in your footage that differs across systems to the usual graphics card and driver issues to something being bad with your MediaCache....
    Mylenium

  • Zen Touch freezing when trying to connect to USB 2.0 Help plea

    I have a strange problem with my Creative Zen Touch 20GB. It freezes everytime when I try to connect it to my USB2.0 controller PCI card. After that I have to disconnect the player and push the reset-button. On my USB . onboard-controller the player works fine, but it's not a problem with the PCI-Card I guess, because any other device like USB2.0 external hard dri'ves and USB-sticks work fine with it.
    I have Windows 98 SE installed on my computer.
    Can anyone help me out with that problem please?

    i had the same problem. drove me nuts............for 6 months. then I got crazy and tried sanding the usb plug ( the male end that fits into player itself. ...............Botabing.....it worked , stays connected now.
    May work for you too! oh I used 400 grit sand paper

  • Zen Touch freezing

    So, I just bought a new Creative Zen Touch 20 GB about a month ago, and I've now expirienced my first total freeze. None of the buttons work, so it won't let me turn it off, I'd try taking out the battery, but I noticed I'd need a screw driver for that, and an extremely small one at that. So, any ideas on what to do? Besides waiting until the newly recharged battery runns out?

    Try the reset button. It's the tiny button on the side best accessed with a bent paper clip. Don't use anything sharp to press it.

  • Zen Touch freezes even after full recha

    I have a 20gb Zen Touch that I have not used for the past few weeks(This is because of my new toy, my 30BG Zen Vision M). Figuring that the battery was discharged or something because of the lack of use, I recharged it fully. I turn it on and it gets stuck on the "Zen Touch" screen. I have tried to reset the Touch numerous times, but it still gets stuck on that screen. Somehow, I think the Zen Touch battery is fried. Help!

    Well you can't get to recovery mode. Only thing left to do replace the hardri've. That's most likely why it won't go into recovery.

  • Zen Touch freeze prob

    Today, my Zen Touch decided to stop responding...to anything. When I power it up, it goes to the last song I had played, but it doesn't respond to any buttons at all. I can't even turn the unit off until it idles for 5 min and shuts off itself. The player however does respond to Media Source and I can add and remove music to it. I tried running rescue mode but to no avail because nothing shows up on the screen. I had the player for a little more than a week now and I never dropped it or anything like that. Any suggestions?

    Ok, I made it into the recovery console, but I erased the firmware =$
    How do reinstall new firmware? Creative has zero firmware updates for the zen touch, not even the original firmware is listed there. Now I can't use my player at all! HELP!

  • Creative Zen touch freezing when connecting to

    Apologies if this problem has been raised time and time before.
    Just bought a new PC (with loads of pre-installed rubbish on), and i've installed the most uptodate version of Creative Mediasource, Nomad etc. However when i connect my mp3 to the PC, Mediasource and Nomad is not detecting it. Mediasource gives me a "Player is not connected" error. However on rare occsions, it does manage to detect the mp3 player but when i disconnect and try to re-connect, the problem re-occurs.
    I've made sure all the drivers are uptodate, and made sure all the software (Mediasource, Nomad) have been uninstalled and installed, again and again. But my PC is just not detecting.
    Another thing i've noticed is that, when the mp3 player is connected, when I open up 'My Computer' - this window seems to just freeze and hang there while its saying "searching for items". Not sure if this is because the mp3 is connected.
    I cannot understand why this is happening, though someone mentioned that there is some software called Sonic MyDVD or Sonic DLA. Not sure though, although I have these installed on my computer. I'm currently trying to uninstall them, but having trouble.
    Any help is much appreciated.
    Thanks,
    Michael

    i had the same problem. drove me nuts............for 6 months. then I got crazy and tried sanding the usb plug ( the male end that fits into player itself. ...............Botabing.....it worked , stays connected now.
    May work for you too! oh I used 400 grit sand paper

Maybe you are looking for