Zen Touch has connection probl

Hello,
I have my Zen Touch for about a month now, great thing, but now I have a irritating problem. Everytime I connect my Zen with the USB cable, and I want to open 'this computer' it doesnt do anything, except for showing the little flashlight
http://img474.imageshack.us/img474/650/flash7qn.jpg
When I open 'creative mediasource organizer', click on 'import tracks', then 'this computer' wont open also. Can anyone help me because on this way I cant do import songs to my Zen anymore.
best regards,
bram

No bother!
Connect your player up to the power source, as if you were going to charge it. Make sure it is turned off! There's a wee hole on the side of the player, near the 'random' button. Push a paper clip down that and hold the 'play button until the screen wakes up. You should now be in recovery mode. Now scroll down to 'clean up' and there you have it! It doesn't take too long. When you connect it up to the computer next, it should update the library information- just click on my computer when it's back to normal and you *should* be ok...

Similar Messages

  • Zen Touch, USB Connection Probl

    Ok, i just purchased my Touch today and just fooling around with it,, it seems great, until...... i tried to connect it to my computer.
    I first installed the CD and then rebooted, after that i plugged it in and all i get now is a "unknown device" listed. I clicked on it and then tired to update the driver with the CD still in the dri've but it wouldn't find what i need.
    Is there a driver that i need? All i can see that comes with the cd is the Nomad Explorer and some manuals.
    As for the install section i didn't install the Media Source as i have a Audigy 4 Pro, so i have Media Source installed already. But even opening MS nothing happens.
    Any ideas? lol,, i love spending 500 bucks and having to spend 2 days trouble shooting to make it work.

    Ok i installed it and it still didn't work... So uninstalled everything and then reinstalled it all allowing Media Source to install.
    The error message that comes up is this:
    "One of the USB devices attached to this computer has malfunctioned, and Windows does not recognize it."
    Then it gives my USB Root Hub (6 ports)
    and on one port it has UNKNOWN DEVICE. If i click on that device i can get to the point where i can install drivers but where would i find these drivers? The only Driver folder on the CD has .exe files not .inf ?
    This is annoying and confusing.

  • Creative zen touch 20gb installation proble

    i've had a look through the forum for help, so apologys if this has been posted else where. Ive just got myself a new laptop and have installed or should i say tried to install the software for my zen touch from the installation disc, bearing in mind this worked perfectly on my old laptop. i've?installed it from the disc, the problem im having is its saying my music libary is corrupt, but i've not got any music libary loaded on the pc, also is says i should download Microsoft Jet 4.0 Database Engine Service Pack 8 :smileyindifferent: any idea what thats for ? it wont even recognise my touch is connected !?i have got windows media player installed where as i had wmp 0 on my old laptop, could this be a problem ??im at a loss as what to do, i thought installing from the disc should be straight forward like it was the last time i did it, but alas no ?any help very appricated.

    Pob wrote:
    Hi folks,
    My old computer running XP recently gave up on me and I now have a new computer using Vista.
    I have lost the cd I got with my Zen Touch as it was over 5 years ago now but it still works perfectly!
    I want to set up Creative Media Player on Vista so I can start transferring music again but I have heard that if I download the firmwear I will lose all the songs that are currently stored. I really don't want this to happen as most of my music was contained on my old PC and it will be very hard to locate it all again so if there was a way I could just set up Creative Media Player the same way I had it before, without losing all my current music, that would be great!
    Any help much appreciated.
    Thanks,
    Pob
    This should get you going? http://mrinternet.wordpress.com/2007...ether-finally/

  • Zen Touch first-charge probl

    Hello,
    I have received a Zen Touch, and I plugged it in to charge it for the first time, but no battery meter appears to tell me how it is charging. When I turn it on while it is plugged in, the icon at the upper left is the plug only, which means that it is simply running off of external power...nothing about it being charged. Any help would be appreciated, maybe some of you have suggestions or stories about your first charge. The player works fine when it is plugged in, but it doesn't appear to be charging.

    If your battery isn't charging you should first try resetting the player. If this doesn't help then try running a disk cleanup. For the Zen Touch: To access the Rescue Mode hold down the play button and KEEP it held down, press the tiny reset switch once, and KEEP the play button held down until the player boots into the Rescue Mode. Choose Disk Cleanup from the menu. For the Zen Micro: To access the Rescue Mode on the Zen Micro, remove the battery, hold the power switch to the "on" position, reinsert the battery. Choose Disk Cleanup from the menu.
    If this still doesn't help then connect the transformer to the wall socket, and the Zen to the transformer. Then turn the wall socket switch on and off several times. The power spike *might* jump the charging circuit.
    If this still doesn't help then contact Customer Support.

  • Problem with my Zen touch USB connection. Help need

    Hey, I have a problem, my usb connection is damaged so I can't send songs to my ZEN TOUCH anymore...can I do something with it's? /warranty are not working/Message Edited by Jason-CL on 06-09-2006 0:4 AM

    Gvido_,
    Have you try using another USB cable to test just in case it's not a problem with the USB connector.
    Jason

  • Zen Touch + P4S = only proble

    I have upgraded my Zen Touch (40GB) with firmware PlaysForSure and so far I have only problems:
    )I made back-up from Nomad Explorer, which I used before, but it stores only song without folders. Now I want to import theese songs to Zen. Do I have to create folders manually and search for long hours which song is from which album? Or is there an easier sollution?!
    2)Is it impossible to copy/move songs between folders in Zen Touch? I think so...
    3)And finally my Zen Touch with P4S software was not recognized at my friend?s notebook despite she has Windows XP (SP2) and Media Player 0. "With P4S you don?t need any other software" is written on Creative web page.
    Do you have the same problems? Can you help me with this? Thank you, Jan

    Can you try loading the firmware from another PC? It is possible there is a (hardware) problem with the unit though.
    Cat

  • Zen touch intermittent transfer probl

    Hi, just bought a 20gb Zen touch, and I am getting errors when transfering mp3's via Media Source.
    I have installed the latest firmware and drivers. It seems to transfer between 800-000 files ok then errors with "Player either not connected or busy - please try later" I have reset the player, formatted the dri've, in fact tried everything in the rescue menu. I have also loaded the software on my laptop and get the same
    problem. Do I have a faulty Zen? Cheers.

    If you were the only person to encounter it then I would say you had a faulty Zen, but others have had it with other players also. There's lots of connection troubleshooting advice here in the Zen FAQ at Nomadness.net, some of it relevant and some of it not.
    I would personally buy a known good USB card for the desktop PC i.e. Belkin or Adaptec, and see if that solves it. It's not a particularly great solution, but it will tell you straight away if the issue is the USB chipset. Try and buy the card somewhere you can return it if it doesn't help.

  • How Can I Ensure My Zen Touch Has The PlaysForSure Upgra

    I recently sent my 20 gigabyte Zen Touch back to Creative for a Hardware repair. I got it back last Friday "Like New". But I'm not sure it has the PFS upgrade installed. So here's my Stupid Question:
    How can I make sure it does?

    Click the menu option-choose information, from the information screen, you'll be able to tell what version of the firmware your Touch has installed.

  • Zen touch 40gig docking probl

    When I plug ig my zen touch it just going in and out of docking and will not stay docked. I have the latest firmware installed. I have reset it a few times and that will not work. I have tried everything I can think of and nothing works. Anyone know why it will not stay docked?

    i am having the same problem right now.
    i plug in, the computer recognizes it, gives me the autoplay popup. i open mediasource and my computer tells me there is no player connected, same thing with wmp0.
    help out?

  • Creative Zen Touch USB Docking Probl

    Hi and thanks for looking:
    I was trying to dock my Creative Zen Touch a few minutes ago, the way I usually do:
    . I have Creative MediaSOurce open
    2. I plug the USB cable into the Zen
    3. It's docked.
    But that didn't work. The "DOCKED" screen came up on my Zen for about 2-3 seconds, then went away and went back to Now Playing. Now, this sometimes happens, but if I reset the MediaSource software and plug it in again, it is usually all set, but no. I've tried over 20 times, with different USB cables too, but I just can't get anything to dock. I'm going to try on another computer and if I can get it to work, I'm planning on backing up everything I have on it. I don't want to reset my 3000 songs that are on my Zen, so if anyone has any solution to this problem, I could really use some help. Thanks!!

    well with my micro, logging off other users and removing other background programs, real player etc.. sometimes seemed to help. try restarting your system.
    I believe that recently rolling back from WMP affects the vision

  • Zen touch has fro

    Hey all,
    I hope someone can help.
    My zen touch (20gb) player froze whilst turning off, i let it sit but eventually had to reset it to get it to go off, since then i havent been able to turn it back on and it wont charge, the blue charge indicating light doesnt appear and when i plug it in all i get is the creative logo and the copyright info, i've tried the reboot advice on creatives web page, but that desnt work either!!!
    Any suggestions?
    Thanks
    Iain

    My zen touch freezes from time to time, done all the usual things without any improvement. But today discovered that it freezes when used near some electrical equipment for example my wife old treadmill which uses an ac motor, its ok with the new treadmill with a dc motor. So it appears that the zen touch suffers from electrical interference, generally this is in the rf range (radio frequency). I hope this helps many users as it was driving me crazy and it appears it's a huge problem with many people.

  • Thank you for guidance on Zen Touch power failure probl

    Hi
    Just wanted to say thanks for the help i found here when my Zen Touch's power button was lit but nothing was on the screen and it wasn't responding to anything i did!
    I was literally really freaking out that all my music would be gone and i'd have to buy a new one (really can't afford to) when i thought to try online and see if anyone else had had this problem and found some people had and that they'd pressed the reset button with a paperclip and that it had solved it - with breath held, i tried this and it worked so thank you all very much - Phew x4000!!
    LisaMessage Edited by lisamclisa on 03-24-200605:4 PM

    Ouch, very unfortunate timing for a PC crash/freeze.
    If the player won't even go into Rescue Mode at all, then there is little else you can try. It would be best to contact Customer Support anyway to see what they advise, and to see if there's anything they can do to assist you.
    Cat

  • Zen Touch 20G Power Probl

    About two weeks ago I purchased my Zen Touch mp3 player to replace my iPod mini. On lunch from work today, it suddenly powered off when I went to push the <- (Back) button, with a sharp clicking sound through the headphones. When I went to power it up, it came up, but as soon as I pushed the 'Menu' button, it did the same thing (clicking sound and all). Now it's not powering up, at all. The power button isn't lit, and it was at full battery at the time this occured. Any ideas ?

    Nikko,
    Aside from what brotsalami mentioned (which is a very important point), check out this knowledgebase case for more ti
    ps.
    Cat

  • Zen Touch skipping/mashing probl

    Hey guys, i've had my zen touch for about 3 years, um its been working fine for the past while, and than when i took it on a plane, i started it up and it plays fine on most songs but on like /4 of the songs it will skip frequently and mash or skip to other songs for a couple seconds than return to the same song, and do it again shortly after. Any ideas guys?
    Thanks,
    Landon

    Try to perform the recovery mode on your unit and see if it works then.
    Good luck.

  • My Zen Touch has suddenly stopped worki

    Hello, newbie alert in progress!
    My 20Gb Zen Touch was working fine this morning till I tried reinstalling the drivers that I got from http://www.jumpingcholla.com/jce_nomad_ZEN.htm (I had to do it this way after I lost my original CD ) after I had to reinstall the system recently. I plugged the device back in afterwards but XP seemed to be unsuccessful in detecting it properly.
    And now it seems that the thing simply won't turn on, even when disconnected from the computer and with the lock disabled! The light on the power switch remains lit, but holding it down does nothing and I'm not getting anything on the screen. It's as if I'm being permanently locked out of my own player for some reason or other! (And yes, it's fully charged, I charged it up only last night!)
    If you need me to post my serial number on here, let me know. But I'm using Windows XP SP2, AMD Athlon XP 2000+, 52Mb RAM, Creative Zen Touch 20Gb, still using the original firmware that came with my unit (seeing as I found no real problems with the device so far), and I tried upgrading the drivers to .30.03 but that didn't make much of a difference.
    While I'm here, do you know if there's any way I can apply for a replacement copy of the install CD seeing as it appears to have disappeared with little chance of finding it again?
    Thank you!

    Well, resetting the device worked in the end! Whew, thanks for allowing me to not worry lots anymore!
    Thing about the install CD though...... I assumed the downloadable .30.03 drivers alone would be all you need post-reinstall, but they didn't seem to help detect the device afterwards, therefore I think they're upgrade-only ones.
    Unless of course I'm not looking hard enough and base drivers are available too from this site? Is it like in one of the software packages or something?

Maybe you are looking for

  • Report region with sql query

    Hi I have a report region with sql query. There are two regions in page. On top of page, user enters data and after that second region show enterd data which is report region based on sql query. Now,when this page is opned, as user had not entered an

  • After looking at the forums and seeing all the people complaining about 10.1...

    We should all just e-mail Adobe and tell them to revert to their last version, because this is too much of a pain and none of this has happened before. I know I am.

  • MacBook-Pro battery can not retain charge

    Hi, I have this Macbook-Pro 13 inch since 2010. I have very sparesely used it. Recently i discovered it's battery is not able retain charge. I charged it overnight. In the morning i found battery charge is 0%. It was very poor by apple standard for a

  • Unable to find correct BADI

    Hi All, I am very new to SRM world. I want to know about BADI's role in SRM. When can we use BADI. How can we get the information about the implemented BADIs in the project. Please post the easy documentation on BADI to me if you have. Thanks in Adva

  • What good are Creative cards then?

    After reading the "Response to forum questions and latest updates" thread I have concluded that there's nothing special about Creative cards anymore. Is there a difference in the Windows Vista and Windows XP implementation of the X-Fi CMSS3D feature?