Zen Touch is not recognised on my

I have installed the new Firmware and the new music manager software etc, but it just won't be recognised by my PC anymore. It keeps asking me to install the thing. I insert the official zen touch CD and go through the motions, but it still doesn't work. I also have a laptop and have installed everything fine on there, but my PC desktop doesn't seem to be accepting it. Is it something to do with Service Pack and 2? My laptop has 2, but my PC has .
Thanks

Do you have Windows Media Player 0 installed on the PC? If not, install it. You can also tryout this little file (fixup.zip) done by another forum peer (DM) from this thread and see if it hel
ps.
Jason

Similar Messages

  • TS1474 I would like to transfer the music that is already on my iPod touch to a new computer.  At present, my iPod touch is not recognised on the new computer.  How do I resolve that so I can literally connect it to my new computer and transfer all my mus

    I would like to transfer the music that is already on my iPod touch to a new computer.  At present, my iPod touch is not recognised on the new computer.  How do I resolve that so I can literally connect it to my new computer and transfer all my music?  Any help is much appreciated.

    I would like to transfer the music that is already on my iPod touch to a new computer.  At present, my iPod touch is not recognised on the new computer.
    It doesn't quite work that way. Transfer your music from the old computer to the new one. Then, sync the iPod.
    iTunes: How to move your music from one computer to another:
    http://support.apple.com/kb/HT4527

  • My new ipod touch is not recognised in itunes or Windows 7 on any of my computers/laptops.  I've followed the online advice and still no luck.  Help much appreciated!

    My new ipod touch is not recognised in itunes or Windows 7 on any of my computers/laptops.  I've followed the online advice and still no luck.  Help much appreciated!

    Does it charge?
    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Try another cable
    - Look at the dock connector on the iPod. Look for abnormalities like bent or corroded contacts, cracked or broken plastic.
    - Make an appointment at the Genus Bar of an Apple store.
    Apple Retail Store - Genius Bar

  • My Ipod Touch is not recognised in itunes or my computer but still charges, Please help

    My Ipod Touch is not recognised in itunes or my computer but still charges when connected via USB Please help

    Did plugging it into another USB port do any good? Make sure it is a USB port on the back of your PC and not via a USB hub or one on the front as they sometimes do not output enough power for the iPod to properly communicate with your PC.
    Do you have another 30 pin dock connector cable around you use to try and rule out a faulty cable? 
    Did you try a hard reset of the device with it still connected to your PC?  To do this, press and hold both the Sleep/Wake and Home buttons together long enough for the Apple logo to appear.
    With the article above were you able to verify that the Apple Mobile Device Service was installing and running on your system?
    Lastly, try plugging it into a different PC to see if it is recognized there.  It can help narrow down whether it is an issue with the iPod or with your PC.
    B-rock

  • Ipod touch is not recognised by the computer or in i tunes and is unrepsonsive. All we get is the apple logo. How can it be restored to factory settings?

    My ipod touch is not recognised by the computer or by itunes. All we get on the ipod is the apple logo and it won't do anything else. How do we restore the factory settings?

    Have you tried everything here?
    iOS: Not responding or does not turn on
    B-rock

  • Ipod Touch is not recognised by Windows XP and does not appear in Itunes

    I received an Ipod touch recently and set up an Itunes account and quite happily used Itunes and the Ipod touch for about six weeks without any problems. I installed all of the required software updates for the Ipod but about 3 weeks ago began to have problems.
    1) When connecting the Ipod to the computer through the same USB port as usual, I received a message saying that 'charging is not supported by this accessory'
    2) The Ipod is no longer recognised by Itunes
    3) When connecting via the USB port, message received stating that 'device is not recognised' and it shows up as an unknown device in device manager. When connected it appears to set up empty disk drives under the E, F, G and H drives with an associated system volume also being set up.
    I have re-installed Itunes, Apple Mobile and Bonjour on several occassions, I have cleaned the computers registry, tried the selective start up option via MSCONFIG and ried to re-install the drivers all to no avail.I have also tried a system restore back to before this all began.
    I know the USB ports are working, I have checked them, there is obviously a conflict somewhere that is stopping Apple software working on my computer but as I haven't made any software changes or hardware changes since before this sorry saga began I am running out of ideas.
    Any assistance / ideas would be gratefully received

    I don't know what I did, but now it works!!! :O

  • My iPod touch is not recognised by the computer or iTunes

    I have recently whiped my laptop and did a clean install of Windows 7. Now the iPod and the computer both beep when I connectn it to the computer BUT it does not appear as a drive i  the computer, it is not recognised in iTunes and it does not show to be that it is charging.
    I have uninstalled iTunes and all the associsted softwar (in the order designated) and reinstalled iTunes, powered down and restarted both deviceses, and stopped and restarted the Apple Mibile Device software. I even tried to "restore" the iPod and did the whipe on it (bad choise) now it displays the cord and plug and is asking to be connected to iTunes. but the laptop and iPod are not talking past the initial beeps.
    Not sure where to go from here.

    Did you try everything here:
    iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows

  • My ipod touch is not recognised in i tunes but it appears in my computer

    my i pod touch is recognised by my computer OK but it is not recognised in i tunes.
    I am running windows 8.1

    See
    iOS: Device not recognized in iTunes for Windows
    - I would start with
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    or              
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
    - Then do the other actions of:
    iOS: Device not recognized in iTunes for Windows
    paying special attention to item #5
    - New cable and different USB port
    - Run this and see if the results help with determine the cause
    iTunes for Windows: Device Sync Tests
    Also see:
    iPod not recognised by windows iTunes
    Troubleshooting issues with iTunes for Windows updates
    - Try on another computer to help determine if computer or iPod problem

  • Ios 5 ipod touch 4thgen not recognised in itunes pic on screen with cable arrow and itunes logo wont do anything at all now.

    Hi was syncing my ipod touch 4th gen it does not recognise my ipod in itunes and have been restarting the computer and following instructing to try and get it going again but nothing will work.  All i am left with on my screen is a picture of the ipod cable with an arrow pointing upwards the word itunes then the itunes blue circle with the music note in it.  any ideas on how this can be restored as i have now drawn a blank.

    Have you tried evething here:
    iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X
    or
    iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows
    Have you tried another computer to help determine if you hav an iPod or computer problem?

  • Zen Touch: battery not working anym

    I have bought my Zen Touch a bit more than a year ago, so I am not covered anymore by the warranty (and apparently I can get any official support from Creative...) Not many serious problems so far, up to a few days ago.
    I can only use my Zen Touch when plugged on the power cord. The battery is not responding. When plugged using the cord, I don't have any indication of the battery being charged. When I take out the plug, the player "dies". I tried to connect using the USB cable (and without the power plug) but that did not work (I think that was not working on mine since the beginning anyway.)
    So far, I have looked for a similar problem on the forums, reset the player, rebuilt the library... Without any result.
    If you have an idea how to solve this problem, that would be nice Otherwise, I will open it to see what the battery looks like...
    Thanks.

    Yep, try a reset.

  • Audio sounds like half-speed on Zen Touch, but not on the

    I've got TONS of Opie and Anthony that I'm moving from my computer to my Zen Touch. Unfortunately, many of the files sound as if they're playing at half-speed, even though the timer at the bottom is running at the appropriate speed. This only happens when I'm playing them on my Zen Touch; when I listen to the files on my pc, the sound is just fine.
    Running firmware .00.06. I've read that there have been issues with new firmware, so I've been wary to update to a newer version.
    If anyone can help, you'll make a guy really happy...Message Edited by taunter on 06-20-2005 :34 PM

    Taunter,
    Here is a rundown of what MP3 bitrates you will want to have:
    Mono: 24KBPS and higher
    Stereo: 40KBPS and higher
    If you try VBR, it may be difficult to figure out exactly where to place the slider, but I would suggest keeping it from the lower sections so that it doesn't drop into the Khz sampling range.
    All WMA bitrates should work ok, since they do not sample lower than 22Khz.
    Jeremy

  • Zen Touch still not working on pC

    After countless tries, and following of instructions by Uber Gurus and whatnot, My zen touch can still not work on my pc.
    Since I got my zen, it worked fine on my pc, but randomly one day it started malfunctioning.
    It started with my pc freezing on loading the library in nomad explorer and mediasource, now the library does not load at all and nomad explorer shows nothing. GODDAAMNIT this is pissing me off.
    It works on another computer but that's not what's bothering me.
    I have installed the newest drivers, uninstalled and reinstalled, I've done the same with mediasource and nomad explorer.
    --I have gone into recover mode, cleaned up, and rebooted, result: NONE!!!
    It works on another computer so what can be the problem?
    ---I've cleaned the registry of any creative tracks and what? NOTHING!!!
    There has to be something, honestly, so far all I've written in the forums is complaints and problems.

    When you restore, Touch ID will not work.
    Maybe you backup is not good? Try restore as new:
    http://support.apple.com/en-us/HT201252
    Also read here:
    Use Touch ID on iPhone and iPad - Apple Support

  • IPod Touch 3G not recognised by iTunes after update

    I recently updated iTunes to 11.1.4.62, but now, my (admittedly, rather old) 3G iPod Touch, isn't recognised by it at all. It charges fine through the computer, and is recognised by the computer, it's only iTunes that won't see it - I'm worried that because my iPod's so outdated, it's being left behind by iTunes. My iPod's software is 5.1.1, and I'm running Windows 8 - any ideas on how I can resolve this?

    Perhaps something here will help:
    http://support.apple.com/kb/TS1538
    Regards.

  • Touchpad on my Zen Touch is not work

    Hi, I have had my Zen Touch for approximately 2 years now. It was working great, no complaints. But about a month ago, the touch pad stopped working. I tried resetting it, but to do that you need to work the touchpad. My warranty expired obviously. How can I fix it's

    http://www.nomadness.net/modules.php...ewtopic&t=8668?Yeadon563

  • Zen Touch buttons not working prope

    Recently THe forward button has been either pauseing my player or randomizing all tracks. The back button also needs to be pressed more then once or hard to get it to work.... Anyone know why it has begun doing this?

    HI All. The problem with the Zen Touch buttons starting to behave strangely is well known in the old users community. Luckily enough, somebody documented very well the instructions to disassemble the unit and fix the issue on another Zen users forum:http://www.nomadness.net/modules.php...ewtopic&t=8668 Believe me: it needs great patience, but it works. And I speak on the base of my personal, direct experience Cheers,M.E.A.

Maybe you are looking for

  • How to achieve correlation in calls involving OSB services

    Hi, I have service call pattern like : A->B->C->D->E->F->A . The second call to A from F should be for the same instance of A that called B initially. Normally we achieve this using correlations in SOA 11g Bpel. (Where B,C,E,F services are OSB Proxy/

  • Could not open Transport File for creation

    I Changed the path and copied the repository from old path to new path. While executing se38 à RSCMST TCode, we get the errors in RED(HTTP interface using fuction group). 1.The error log check_subrc: subrc     1  instead          0 check_subrc: Compo

  • Number keys 1 thru 3 are not working

    number keys 1 thru 3 are not working, so I am unable to unlock my iphone.

  • Live sound toggle between tracks?

    How do we toggle between 2 tracks to compare sound without pauses or hiccups or silent spaces? just back & forth. Thanks

  • Laptop sleeps every 15 minutes with sleep mode turned off

    I have a Satellite U305-S5077 that won't continue to run for more than about 15 minutes if I'm not using the mouse or keyboard, even when I'm using it plugged in.  The screen blanks and the power out stops to the TV to which it is hooked up.  If I hi