Zen touch no longer being recognized and im ticked

OK here the problem, When i plug in my zen touch the computer makes 3 quick "I recognized the device" noises. then nothing shows up anywhere , not in WMP, not in NOMAD explorer, or anywhere. When i Unplug it it makes the Disconnected noise. Help?

I have the exact same problem, this morning my screen froze, I reset the device, after resetting only 265 songs were left out of the original 4,500+ songs. Then I wanted to put the other songs back on, but my computer didn't recognize it
!!! Help, anyone? ?Edit: the mp3-player says it IS connected!Message Edited by joanv on 2-6-200608:04 AM

Similar Messages

TS1591 my ipod touch 2g is no longer being recognized by itunes why and what can i do i have reset it and everything

my ipod touch 2g is no longer being recognized by itunes why and what can i do i have reset it and everything

If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here.

TS1369 Tried to restore my ipod classic on a windows computer... there was some sort of failure and it is now stuck in "disk mode." The ipod is no longer being recognized by itunes.

Tried to restore my ipod classic on a windows computer... there was some sort of failure and it is now stuck in "disk mode." The ipod is no longer being recognized by itunes.

I am having the exact same problem. My ipod has been stuck in disk mode for over two hours and now itunes is frozen.

My iPod touch isn't being recognized by my pc. The lock button on it won't work due to water damage, and a friend of mine fixed the problem by restoring it on his computer. How do I restore it without the lock button?

My iPod touch isn't being recognized by my pc. The lock button on it won't work due to water damage, and a friend of mine fixed the problem by restoring it on his computer. How do I restore it without the lock button?

first try:
iOS: Device not recognized in iTunes for Windows
next
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

HT1386 Since installing the latest itunes to windows 8 my iphone and ipod touch is not being recognized in itune

Since installing the latest itunes to windows 8 my iphone and ipod touch is not being recognized in itunes, therefore i can't change playlists or add songs etc. Is this a fault with itunes as it was fine with the older version or is there something i can do. I'm not on IOS yet but would like to backup my phone first but can't do that atm due to not being able to view my phone on itunes!
Thanks

Hi, jodie_0182.
I would recommend the steps in the article below. See the section labeled Verify that the Apple Mobile Device USB Driver is installed > For Windows Vista, Windows 7, and Windows 8 > Update the Apple Mobile Device Driver.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
If the above step does not resolve the issue, try all remaining steps in the article.
Cheers,
Jason H.

My 4th generation ipod touch is not being recognized on my computer ?

My 4th generation ipod touch is not being recognized on my computer what do i do ?

iOS: Device not recognized in iTunes for Mac OS X
or
iOS: Device not recognized in iTunes for Windows
- I would start with
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
or
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
- New cable and different USB port
- Run this and see if the results help with determine the cause
iTunes for Windows: Device Sync Tests
- Try on another computer to help determine if computer or iPod problem

My Apple ID is no longer being recognized after IOS5 update

My Apple ID is no longer being recognized after upgrading my I-Phone to IOS5. When trying to update my aps, it asks for the password and doesn't recognize it when I enter it. I've been through the entire "Forgot my ID" process, but nothing's working. Can anyone help please?

Me too my real worry is that we will not be able to download software updates as it seems to me that the original software was installed using the old ID

SCANNER NO LONGER BEING RECOGNIZED

I have a G4 with OS X 4.5 and my hp scanjet 3970 was working fine until I applied the last OS update now it is no longer being recognized by my computer, I've tried updating the drivers but was still unsuccessful in getting it operable...I've repair the permissions from my DVD but still was not successfull.
Does anyone have any solutions or suggestions (other than getting a different brand scanner. lol!!!)
THANKS IN ADVANCE

I have a G4 with OS X 4.5 and my hp scanjet 3970 was
working fine until I applied the last OS update now
it is no longer being recognized by my computer, I've
tried updating the drivers but was still unsuccessful
in getting it operable...I've repair the permissions
from my DVD but still was not successfull.
Does anyone have any solutions or suggestions (other
than getting a different brand scanner. lol!!!)
THANKS IN ADVANCE
Okay everyone I was able to resolve the issue with my scanner.
After posting here I recalled how my wireless mouse was acting up and the step I took to resolve that issue, so after uninstalling the hp software I went to the Library/Preference folder and removed all the hp scanjet plist and all the other related scanjet files.
I emptied the trash can and restarted my computer and then reinstalled the updated driver and "walaa" I was once again able to create magic.
Well thanks to everyone.
Powr Mac G4 Mac OS X (10.4.5)

HT1335 My Ipod touch is not being recognized on my PC as a usb device.

My Ipod touch is not being recognized on my PC as a usb device.

Hey MOIMC,
Sorry to hear your computer isn't recognizing your iPod Touch when you plug it in. I was able to find two articles that might help you out:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
and
iPod not recognized when connected to Windows laptop over USB
http://support.apple.com/kb/TS1401
Hope this helps,
David

IPhone 4s not being recognized and cannot be activated for service--what does this mean? I can't sync with iTunes. Please help

iPhone not being recognized and cannot be activated for service--what does this mean? I can't sync with iTunes. Please help.
When I connect iPhone to USB iTunes is giving me the above message. Please advise if you know the fix.
Thanks,
Lina1116

did you find a fix?

Zen Touch No Longer Recognized By Windows Media Pla

My Zen Touch stopping being recognized by Windows Media Player today. I still see the MTP connected icon in the task tray and I still it listed without a warning in Device Manager, but WMP doesn?t recognized that it is attached. I?ve tried different USB ports and a different USB cable. There are no errors in the application log. I reformatting my device and run the cleanup option, but I still can't WMP to see the device. The only changes I can think of is installing IE7 Beta 2 and installing MusicMatch. I?ve since uninstalled MusicMatch, but I still have the problem. Does anyone have any suggestions? Or there a way I can increase the logging so I can get a better idea of what might be failing.

Hi Ted
I deleted the file and reconnected my device and it quickly grew to 600kb. I'm not sure exactly what you need and there didn't seem to be anything interesting at the end of the log, but I did find the following lines which, from what I can, is from the point when WMP tried to establish a connection with the device and failed.
WPD: 740.544 003 0 0 [WpdMtpDr.dll] ENTERING: Wdf_EvtIoDeviceControlWPD: 740.544 003 0 [WpdMtpDr.dll] Wdf_EvtIoDeviceControl, Wdf_EvtIoDeviceControl: IoControlCode: '0x32504D57'WPD: 740.544 003 0 [WpdMtpDr.dll] ERROR: Wdf_EvtIoDeviceControl, HandleIoControl failed : hr = 0x80070032, 'The request is not supported. 'WPD: 740.544 003 0 [WpdMtpDr.dll] ERROR: Wdf_EvtIoDeviceControl, Completing WDF request with status -07374823WPD: 740.544 003 0 [WpdMtpDr.dll] ERROR: Wdf_EvtIoDeviceControl, WdfRequestComplete failed: c000000WPD: 740.544 003 0 0 [WpdMtpDr.dll] EXITING: Wdf_EvtIoDeviceControlWPD: 5688.336 0843 0 2 [wpdsp.dll] ERROR: IoControlHelper, WdfDeviceIoControl failed, hr = 0xd000000WPD: 5688.336 0843 0 [wpdsp.dll] EXITING: IoControlHelperpCtx = 009AFF0, opcode = 32504d57, inputBuffer = 0344E458, bytesToWrite = 4, outputBuffer = 0349540, bytesToRead = 4, bytesRead = 0344E460WPD: 5688.336 0843 0 [wpdsp.dll] ERROR: CWPDDevice:eviceIoControl, DeviceIoControl failedWPD: 5688.336 0843 0 0 [wpdsp.dll] EXITING: CWPDDevice:eviceIoControlopcode = 32504d57, lpInBuffer = 0344E458, nInBufferSize = 4, lpOutBuffer = 0349540, pnOutBufferSize = 0344E460WPD: 5688.336 0843 0 0 [wpdsp.dll] ENTERING: CWPDDevice:eviceIoControlopcode = 32504d57, lpInBuffer = 0344E458, nInBufferSize = 4, lpOutBuffer = 0349540, pnOutBufferSize = 0344E460WPD: 5688.336 0843 0 [wpdsp.dll] ENTERING: IoControlHelperpCtx = 009AFF0, opcode = 32504d57, inputBuffer = 0344E458, bytesToWrite = 4, outputBuffer = 0349540, bytesToRead = 4, bytesRead = 0344E460WPD: 740.424 003 0 0 [WpdMtpDr.dll] ENTERING: Wdf_EvtIoDeviceControlWPD: 740.424 003 0 [WpdMtpDr.dll] Wdf_EvtIoDeviceControl, Wdf_EvtIoDeviceControl: IoControlCode: '0x32504D57'WPD: 740.424 003 0 [WpdMtpDr.dll] ERROR: Wdf_EvtIoDeviceControl, HandleIoControl failed : hr = 0x80070032, 'The request is not supported. 'WPD: 740.424 003 0 [WpdMtpDr.dll] ERROR: Wdf_EvtIoDeviceControl, Completing WDF request with status -07374823WPD: 740.424 003 0 [WpdMtpDr.dll] ERROR: Wdf_EvtIoDeviceControl, WdfRequestComplete failed: c000000WPD: 740.424 003 0 0 [WpdMtpDr.dll] EXITING: Wdf_EvtIoDeviceControlWPD: 5688.336 0843 0 2 [wpdsp.dll] ERROR: IoControlHelper, WdfDeviceIoControl failed, hr = 0xd000000WPD: 5688.336 0843 0 [wpdsp.dll] EXITING: IoControlHelperpCtx = 009AFF0, opcode = 32504d57, inputBuffer = 0344E458, bytesToWrite = 4, outputBuffer = 0349540, bytesToRead = 4, bytesRead = 0344E460WPD: 5688.336 0843 0 [wpdsp.dll] ERROR: CWPDDevice:eviceIoControl, DeviceIoControl failed
Message Edited by winterminute on 02-08-2006 07:25 AM

Creative Zen Touch no longer docking; problem has appeared out of the bl

For the last couple of years, I've used my Creative Zen Touch without any issues. I managed to upgrade to the MTP firmware with no troubles whatsoever. When I tried to plug it in a few days ago and add a number of songs, the computer no longer recognised the player. The USB ports seem fine, and when I plug it in the player boots. It doesn't come up with the "docked" screen on the player, however, and in Windows a "trying to add new hardware wizard" window pops up that never used to pop up before. Whatever I try to do, it never works. I'm using Windows XP SP2 and like I said, I never used to have any issues before until this popped out completely unexpected. It just won't realise that the Zen Touch is a MTP player for some reason!

The people on the forum who would respond are customers, like you, being rude to them probably won't encourage them to help.
These two pages contain some useful tips, have you checked these yet?
http://us.creative.com/support/kb/ar...p?l=2&sid=0053
http://us.creative.com/support/kb/ar...p?l=2&sid=9287
Cat

My ipod touch isn't being recognized by iTunes or my computer. It's in "ipod recovery mode"?

My ipod touch 5th generation is not being recognized by my computer under devices or in itunes; however, when I click on devices and printers it comes up under "unspecified" and is labeled as "Apple mobile device usb driver." I right clicked the icon and hit troubleshooter and it opened itunes and told me I should restore and update my ipod. I did this twice and nothing has changed, it is still not being recognized. This is a big problem because the only thing that will pop up on the screen of my ipod is the symbol for the usb plug with an arrow pointing to the itunes symbol (meaning plug into itunes I assume). I have tried restarting my ipod and restarting my computer and nothing is working. I have the most recent version of itunes. How do I fix this?

first try:
iOS: Device not recognized in iTunes for Windows
next
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

IPod classic no longer being recognized by iTunes

iPod classic version 2.0.4 is not showing up in my iTunes anymore. I can see it listed in my device manager under Other Devices as iPod with a yellow exclamation point, although I've followed the instructions in this article iOS: Device not recognized in iTunes for Windows and I get an error stating "Windows found driver software for your device but encountered an error while attempting to install it. The system cannot find the file specified."
I've uninstalled and reinstalled iTunes already. I also have an iTouch 5th gen which is being recognized fine, the same iPod classic is being recognized on my laptop fine but my pc is what has all my music is.

I am having the exact same problem. My ipod has been stuck in disk mode for over two hours and now itunes is frozen.

My Lacie Hard Drive is no longer being recognized by my MacBook, please help.

Hi all,
I have a Lacie external hard drive (LaCie Rugged XL eSATA 3Gb/s | USB 2.0) that I have been using on my MacBook (timemachine) (late 2008, 2.4 GHz Intel Core 2 Duo with OS X 10.9.1). One day it stopped being recognized, not showing up on the desk top, the disk utility program, etc.
I Googled many articles, blogs and support communities but have yet to find any solution. I also went to the Lacie support site and followed the trouble shooting instructions - changed my power source, usb cable, and tried the drive out on 3 different computers. The results: The drive works fine on the other computers (OS X and Windows) using the same power and usb cords. So Lacie recommened I contact Apple but my MacBook is not under warranty so I have decided to try my luck with the Apple Support Community. If any one has had this problem or knows the solution, please let me know. I would like to continue to use my MacBook with this Lacie hard drive.
Thanks

Hi Dibenkorn,
Yes, both USB ports are not recognizing this lacie external hard drive. I also tried the SMC reset but that did not change anything. I have another external hard drive (smaller one) and it works on this computer fine and like I said before the Lacie works fine on my other (older) MacBook. I just can not figure out what went wrong or what happened...

Zen touch no longer being recognized and im ticked

Similar Messages

Maybe you are looking for