Zen V Plus firmware wishl

I could not find a wishlist for the Zen V / V Plus, so here it is.
Plain and simple just like the other player wishlists. No questions and no discussions. Just topics with firmware improvements for Zen V / V Plus. Hopefully, the Creative developers will see this.
The Zen V Plus is a great multi-function DAP, almost perfect for its niche. It only needs a few improvements.
A list in order of importance to me (most important first):
) Improve the current bookmarking mechanism by saving the current playlist along with the current audio track position. Currently, if you are listening to track number 0 out of 20 tracks for an audiobook and save it to a bookmark, restoring that bookmark will restore only the one saved track to the current playlist. You have to manually add back the other tracks to the current playlist.
2) When powering-off on a paused audio track, the Zen should power-on paused to the same position in the audio track. Currently, the Zen V powers-on paused to the beginning of the same audio track. I listen to a lot of audio books and track position is important in a power-on resume.
2a) Option to treat an album as continuous audio content so that a rewind started in track 6 will back into track 5 continuously (in other words from the beginning of track 6 to the end of track 5 and so on). This is very important for listening to audio books.
3) Add FM tuner radio recording.
4) When scrolling a long list of songs, the scrolling should accelerate.
5) The lower end of the volume scale in terms of loudness should be quieter. I listen with high sensitivity IEMs at night and level one is too loud.
6) Audible.com tracks should be in their own album named Audible. Right now they fill up the Album selection list. I have about 40 Audible.com tracks on my Zen V Plus and about 20 music albums. The Audible.com tracks clutter up the album list.
7) When configuring the menu, unchecked top level items should move into the EXTRAS menu. In other words, unchecking PHOTO would move it into EXTRAS.
8) Option to backup all Zen V settings and radio presets to the PC.
9) Allow charging of the Zen V from an ordinary (not Win XP) USB port or from an ordinary USB charger.
0) Add a sensitivity (low and high) option and/or an AGC (auto gain control) option to voice recording for close and distant recording.
) An option to select all tracks EXCEPT speech tracks like Audible.com tracks, podcasts, and audiobook tracks, so that Shuffle mode will play only music. This might be done by having a setting for genre exclusions (speech, audiobook, podcast, and so on)
2) A fade in/fade out option.
3) A configurable HOLD option (lock all, not volume, not play/pause, not both).
4) Scheduled FM recording.
It would be nice if the Zen V Plus could play compressed video, but I presume that with a small battery and low power processor, this is not possible.Message Edited by IpaqMan on 2-05-200609:2 AM

Glad this form is here. I was considering buying a Zen V Plus. I currently use a zen nano plus to listen mostly to audible books. My complaints:. Can't lock it so that if it's sitting in a purse it sometimes accidently turns on and then keeps going until it sues up the battery2. You have to scroll through everything on the zen nano plus in order to get to the book you want to listen to.I thought I would change to the Zen V Plus but am very concerned that you can't rewind within a track. Iuse that a lot and don't want to only be able to go back or forward to a a chapter or track. I tried using a Sandisk Sansa?c40 which had this characteristic and it drove me crazy and I went back to my Zen Nano.
I 'd like a player that has a menu so that you can choose the book or music you want to go to from a menue - withhout scrolling , but that allows you to rewind\fastforward inside the book by the second. ANy ideas?Thanks?Message Edited by lisamp3 on 05-0-20072:26 PM

Similar Messages

  • Zen Stone Plus Firmware Wishl

    I have a Zen Stone Plus 4GB and I think it's a really nice and sexy device, but is lacking a bit on the software side. With just a few small firmware modifications, I think Creative could make it a much greater player.
    I'm starting a wishlist for a future firmware. The list is sorted by priority, with the (imo) most important item on top. If you have any additions, please post them and I'll include them into the list.
    I hope Creative's developers will have a look at this list and implement these suggestions!
    Improve music browser speed
    Problem: Browsing through the folders feels very slow, and often it even misses button presses so I have to press left or right twice to go to the previous / next item. This is most likely because the player starts playing the first track in the folder automatically, which slows down the user interface.
    Suggested solution: I suggest the ability to turn off auto-play in the file browser.
    Avoid embarrassing situations
    Problem: Usually I turn on the player before plugging in the headphones. The player realizes that the headphones aren't yet plugged in and plays back music over the speaker, which isn't desirable when I'm in a lecture that isn't over yet.
    Suggested solution: Make auto-play on turn-on an option or add an option to not enable the speaker when the headphones aren't plugged in.
    Quick Hold
    Problem: I want to put the player into my pocket and want to quickly turn on the hold feature. For this, I need to press: Menu, Right, Right, Right, Right, Right, Right, Right, Menu.
    Suggested solution: Add "enable lock" as an option for the "My Shortcut" button.
    Quicker turn on
    Problem: When I turn on the player, I have to hold down the menu button for 4 - 0 seconds (it seems to be random) before the display even lights up.
    Suggested solution: Make it turn on after one second.
    Pocket usability
    Problem: I'm listening to music with the player in my pocket. I want to skip forward to the next track. I press the forward button, but nothing happens the first time, because the first button press disables the screensaver. I press it again and it skips to the next track.
    Suggested solution: Make it skip to the next track when the forward button is pressed the first time.

    Tag support: the ability to select music by album/artist/track instead of folders
    Display always on option - i know its to help save battery life but sometimes it would be helpful if the display stayed on
    Display artist and song name, inst4ead of just the song name/file name
    Alarm clock function: my Zen stone plus has a speaker, and a clock function. My Zen Xtra has a clock and an alarm clock function but no speaker other than headphones (if any are plugged in) for the alarm to sond through, the same is true with my visio:M? the Zen Stone plusw/speaker has a clock but no alarm, and if anything it would make a fantastic little alarm clock with a 'sound' to music or wsound to beep? function.

  • Creative Zen V PLUS firmware fail

    Creative Zen V Plus
    S/No. C6PF2072634R02752T
    DAP-FL0040
    I have experinced, some problem during applying newest firmware. I haVe downloaded all new updates. Then I started Creative ZEN V Plus Firmware .0.03__ and ther was a problem.. On my player`s screen was displayed updating firmware. And there was displaying for a couple hour. But. At the end of applying of firmware. The message was updatinf firmware failure. Then I repeated for several times. And Againg was the same message.
    Then I detached player from my PC. And from that time my player is not responding..
    I tried to do this again. But my player is not functioning welll. When I tur it On the display is showing just Creative logo, and then it is (self) turned off.
    Now player cant be recognised by computer. But when I connect my Zen V Plus, it is recognised as STMP3600 device , and is trying to install new driver.
    Can you Help me.
    I bought my Creative Zen V Plus in miami I September this year. I`m Living in Serbia. Europe.
    Sincerely yours,
    Dejan Djordjevic
    P.S. I`v tried to reset player, and to reset frimware according to your instruction in your Knowledge database. But can`t help me.

    Yes I've got a TEAC MP-244 and I wanted to upgrade the firmware.
    Tghe tool that was sent me by a TEAC support member worked; but it made my player to be a "STMP3600" and Windows XP wanted to have a driver.
    I looked into the folder but the files there were corrupt.
    The I downloaded the older firmware from the TEAC support website and - god thanks - the files in this packed folder worked. That means that the STMP3600 was recognized and a new device - in German: Player-Wiederherstellungskonsole (Englisgh sthg. like that: Device to recover the player?) - was created. Then I could upgrade the firmware successfully.
    Maybe that's a help for you all guys.
    Kinds gegards,
    Marcel S.
    PS: Excuse my bad English. ;-)

  • Zen v plus- firmware upgrade fa

    i am using a zen v plus 4gb.
    recently, it stopped working all of a sudden and the screen went blank. everytime i turn it on, it goes into recovery mode. i tried to upgrade the firmware, but the utility fails. if i select the format option from the recovery mode, it displays- file system error.
    i am on a vista 64 bit system.
    any help will be appreciated.
    cheers

    Why did you have to go and update the firmware on a player that was working great? You don't know how lucky you were.... Read all the other threads here. You probably have WMP . Known problem. It doesn't allow the firmware to recognize that the player is plugged in. Perhaps you installed the wrong firmware. I made the mistake of erasing the old firmware before I uploaded the new stuff and wound up dead. But even with no firmware, I was able to access the recovery menu. That part I don't get. So Many Things can go wrong with these players, for them to be sooo cool when they are working correctly.

  • Creative Zen Nano Plus Firmware Upgrade 1.03

    Hi everyone,
    Just wanted to make you aware of an update that has just been posted on our site.
    <TABLE cellSpacing=0 cellPadding=0 width=540 bgColor=#eeeeee border=0>
    <TBODY>
    <TR vAlign=top>
    <TD height=5><FONT color=blue> (<FONT color=#222222 size=><B>.6 MB</B>) </TD>
    <TD><FONT color=#222222 size=>2 Sep 05 </TD></TR></TBODY></TABLE>
    <TABLE id=Table5 borderColor=#cccccc cellSpacing=0 cellPadding=3 width=540 border=>
    <TBODY>
    <TR>
    <TD colSpan=2><B>Filename: </B><B>ZenNanoPlus_PCFW_LF__03_02.exe</B></TD></TR>
    <TR>
    <TD colSpan=2> ZENP-FWARE-2-LF
    <DIV id=ShortDesc>
    This upgrade improves the functionality of your Creative Zen? Nano Plus player. For complete functionality, make sure that you meet the requirements listed below before installing this upgrade.
    <DIV id=Features>
    <EM>Enhancement:</EM>
    Supports Thai unicode character display.
    </LI>
    <DIV id=Fixes>
    <EM>Fix</EM>:
    Ensures proper functionality of WMA playback when you move forward or backward within a track.
    Improves Shuffle mode randomization when you play back a large number of MP3 tracks.</LI>
    <DIV id=Notes>
    <EM>Requirements:</EM>
    Microsoft Windows XP, Windows 2000, Windows Millennium Edition or Windows 98 Second Edition (SE)
    Available USB port (version . or higher)
    Creative Zen Nano Plus player
    For Windows 98 SE only: Creative Mass Storage drivers .05.0.250 or later, available from the Installation CD or the Internet</LI>
    <EM>Notes:</EM>
    This firmware upgrade only works with Creative Zen Nano Plus players. Do not install this upgrade for other players.
    You will lose all content in your player when you install the firmware. Back up any audio or data files in your player to your computer before upgrading the firmware.
    To install this firmware upgrade, do the following:
    Download the ZenNanoPlus_PCFW_LF__03_02.exe file into your local hard disk.
    Connect your player to your computer.
    Double-click the firmware upgrade file.
    When prompted to set your player in Recovery mode, disconnect your player from your computer.
    Press and hold the Play button while connecting your player to your computer's USB port.
    Continue to hold the Play button for about 0 seconds after connecting your player to your computer.
    Release the Play button when the Find New Hardware dialog box appears on the computer screen.
    Follow the instructions on the screen to install recovery drivers for your player.
    Double-click the firmware upgrade file and follow the instructions on the screen.</LI>
    </LI>
    </TD></TR></TBODY></TABLE>

    I went ahead and updated it anyway. One little thing I noticed was now the volume only goes up to 25 like my Zen Touch instead of 40 or whatever that it did before. Same loudness, different numbers only. Other than that, I have not noticed anything different, but it seemed to work OK scrolling through a song with the old firmware. I did not, obviously, do a detailed comparison.

  • Zen V Plus FIRMWARE "not connected&qu

    Hundreds of people have written about this. CREATIVE, please HELP us!
    Windows XP Professional
    WMP ver 0
    ALL other applications recognize my Zen V Plus, Zen V Media Explorer, WMP 0, Audible, and Windows Explorer.
    When I click on ZENVPlus_PCFW_P4S_L2___0. I get the message that it's not connected. OH YES IT IS. It is connected, it is recognized by ALL other Ap
    ps.
    I've read and tried everything that has been suggested on this forum.
    NO FIRMWARE UPDATE.
    Creative, PLEASE, I am begging you. Please help us.
    Humbly,
    Antonio

    Having this same issue i would love to be able to change the time on my player but have to do this upgrade. Creative please help us

  • Creative Zen Nano Plus Firmware Problem, AGAIN! (PeeBee HEL

    Hi all,
    I am new here and have read all the posts and FAQ's but couldn't solve my problem. Actually there is a post http://forums.creative.com/creativel...d=68923#M07024 which tells exactly my problem. Have tried the solution but didn't solve it.
    So I am here asking again.
    I bought a zen nano plus GB and downloaded the latest firmware(ZenNanoPlus_PCFW_LF__0_03.exe) and the latest mass storage driver (MStorage_PCDRV_LB__07_00_250.exe). When I put the player in recovery mode as the firmware is detecting devices the player takes it self out of recovery mode and back in mass storage mode how do i stop it from down that?
    I am trying to update it because my player doesn't play wma files :angry:I have tried PeeBee's solution but it didn't work. I have taken the battery out, reconnected it and it is recognized in recovery mode. I run the firmware and the computer plays a sound, the icon of connection appears in the nano's lcd and it is out of recovery mode. Then firmware program tells me that the 'device state is not set' and after that the message 'put into recovery mode before updating firmware' Aaaaaarrrrrghhhh!
    I'm also running windows XP SP2
    Can anyone help me?
    Thank you in advance
    Marcelo Lopes
    Rio de Janeiro - Brazil

    Hello-
    I had a similar situation develop. Did your error message say, "Media state not initialized?" Here is what the creative support site says:
    If you receive a message "Media State is not initialized ..." while updating firmware for a MuVo or Zen Nano Plus player, it will be necessary to install the Player Recovery Device driver and then update the firmware.
    . Download the latest driver if you have not done so. You can download it from http://us.creative.com/support/downloads, and file name is MStorage_PCDRV_LB__07_00_250.exe.
    2. Install the latest driver by double clicking on the file name.
    3. Unplug the player from a computer if it is plugged.
    4. Remove the battery from the player (except Zen Zeeon which has a built-in battery).
    5. Press and hold the Play button while connecting the player to the USB port.
    6. Continue to hold the Play button for about 0 seconds after connecting your player is connected to the USB port.
    7. Keep on holding the Play button till Windows displays the Find New Hardware dialog box.
    8. If this is the first time a player is installed as Player Recovery Device, Windows will find a Player Recovery Device (or USB Device), and prompt you for drivers. Click on No, and select "Do not search. I will choose the driver to install". Windows will install the drivers automatically.
    9. Double click on the latest firmware upgrade file that you have downloaded previously, and follow the instructions on the screen.
    0. Format the player if you are prompted to do so.
    It is recommended that you stop your player properly before physically disconnect it from your PC.
    To stop your player in Windows XP, Windows 2000 or Windows ME
    Click on the Safely Remove Hardware icon on the Taskbar, click Safely remove USB mass Storage device, and disconnect your play when you are prompted to do so.
    To stop your player in Windows 98SE
    Make sure that the icon below appears on the LCD screen again for at least fi've seconds before disconnecting your player.
    Now, I did all of the above and still got the error. What solved the problem finally was to connect (using the above method - remove the battery - hold the switch, etc) to a DIFFERENT USB port. Then all worked well, and the firmware transferred. Don't ask me how or why.
    Good luck.

  • Zen Nano PLUS - Firmware Broke My Ze

    Please help me .
    I have read through countless threads here looking for the answer on what to do when...
    ...your Zen Nano Plus is passed warranty, you install the latest firmware, and your player is no longer readable by your USB ports.
    Before I tried upgrading the firmware it would detect it as what it was -- a Zen Nano Plus. Now, however, I plug it in and I <EM>don't even get a notification that Windows detects it even so much as a generic device</EM>.
    Everyone says: <EM>Revert back to an older version of firmware.</EM>
    Question: HOW DO I ACCOMPLISH THIS WHEN ) I CAN'T TURN MY PLAYER ON AND 2) IT IS NOT BEING READ WHEN I PLUG IT IN?
    Sorry about the caps, but I feel Creative is about to let me down after all these years. Did I waste money on this thing or is there an actual solution that works?
    My friend's dad had this exact same problem. He took it back and exchanged it for another Zen Nano Plus <EM>and it did the same thing agan</EM>.
    Thanks in advance.
    PS - Thanks to Creative for being acti've in these forums and trying to help their customers who have given Creative their hard earned money that they earned working at a job.

    IT WORKED!!
    PeeBee you are the man for your post in this thread:
    http://forums.creative.com/creativel...d=279272#M6263
    All this is Creative's doing, though, for their lackluster support for their own product. In one thread they specifically say <EM>Zen Nano Plus has no recovery mode</EM>. Why does it take non-Creative staff such as yourself to call them out and help with these issues? My friend's dad had to take time out of his day to dri've back to Best Buy to exchange it (TWICE). If only Creative would administer care in their own product support then threads centered around Creative's MP3 players being beat down by their own firmware wouldn't have over a thousand thread views each by people looking for retribution for a piece of junk they think they wasted their money on.
    Thank you, PeeBee. I, on the other hand, am investing in Apple next time due to lost faith, faith that has been religiously stood by since the beginning days of Dr. Sbaitso. If this thread gets deleted rather than replied to by a mod, admin, or Creative staff member then it means I'm right.

  • Zen Nano Plus firmware upgrade to 1.14

    I just tried to update the firmware to .4.03 and in the process said it would restart the mp3 player. Upon doing so the unit now is dead and will not turn on at all. I tried the recovery for flash players and nothing will make it turn on. Has anyone else seen this happento their unit after trying to upgrade the firmware Any help of what to try next would be appreciated but I did try to hit the play button many times while plugging into the computer with no luck. That did not work. The unit will not turn on now at all after trying to do the firmware upgrade. Thanks. SR

    I just fixed my Nano Plus using this website from CL.
    Goto the Knowledge Base and key in this Solution ID: 265 Worked great. Thanks, SR

  • Zen Nano Plus: How to resolve issues with installing firmware 1.14

    So .... I managed to kill my Zen Nano Plus when installing firmware version .4.03, but fortunately I've managed to bring it back to life again. :-)
    Here's what I did wrong, and how you can avoid the mistakes that I made ...
    I attempted to install the newly released "Creative ZEN Nano Plus Firmware .4.03" from my Windows 2000 system. However, I had not previously installed the "Creative Mass Storage Driver .07.00.250". In fact there seemed to be no reason to install these mass storage drivers as the Nano Plus player was always recognized by my system. However, while installing the firmware upgrade, it seems that the player is set to recovery mode and therefore the mass storage driver needs to be installed prior to upgrading the firmware.
    I realized this partway through the firmware upgrade when prompted for the "StMp3Rec.sys" driver. I then successfully installed the mass storage driver then attempted to continue with the firmware upgrade. Unfortunately, the firmware software "froze" and the process had to be killed. My Nano Plus player now wouldn't turn on and my system would not recognize it. I then read how to set the player in recovery mode, and was able to see the player listed as "STMP3500" when examining my attached USB hardware (using the "Unplug or Eject Hardware" dialog).
    To install the driver, I then looked at all hardware in my "Device Manager" (right click on "My Computer", select "Properties", choose the "Hardware" tab, click on the "Device Manager" button) then selected the "STMP3500" device. Right clicking and selecting "Properties" (or double clicking) brings up the properties dialog and from there I chose the "Reinstall Driver" button. I specified the driver location: "C:\Program Files\Creative\Creative Mass Storage Drivers\StMp3Rec.sys" and the driver then successfully installed. Finally, I successfully installed the firmware upgrade and all is now working well.
    Here's the bottom line:
    Be sure to install the "Creative Mass Storage Driver .07.00.250" prior to upgrading to the "Creative ZEN Nano Plus Firmware .4.03".
    Maybe it is because I beta tested six or seven different Rio MP3 player models (until D&M Holdings discontinued the Rio brand), or because I have worked as a software developer for eight years - but I tend not to install any software that does not appear to be required. The Creative firmware upgrade software could be greatly improved by including a simple check to see if the Creative mass storage drivers are installed before accessing the player.

    This has been answered many times here. Delete a few files on the player. Create a few folders on the player. Move the songs on the player into the folders. Now add more songs to the player into the folders. There is a limit on how many items the player will allow in the root.

  • ZEN V (Plus) Track Detail View bitrate b

    I have noticed, that bitrate of VBR MP3 files is shown incorrectly in ZEN V (Plus) Track details view. It looks like the bitrate shown is actually a bitrate of only FIRST MPEG frame not average of all track.
    You can easily test this by looking tracks bitrate in Winamp file info and then look at the shown bitrate of the same track in your ZEN V (Plus) player.
    I think it is a bit annoying bug and really hope that this bug will be corrected soon.
    What do you think?
    P.S. My ZEN V Plus firmware version is .0.03eMessage Edited by Bytec on 2-05-20062:08 PM

    Hold down the "Back" button. A list of options will come up. The one at the top ("View All") is what you want.
    For future reference, a lot of things seem to be done by holding down that button
    8p

  • Zen Nano Plus transfer prob

    Am having trouble transferring .wma files to my Zen Nano Plus even though it has 590MB free. When I try to transfer anything using Creative Source I keep getting a "transfer error" message. Have tried reorganising files into folders to cut down on memory used in the root folder - but it doesn't seem to help. It's even stopped letting me transfer between folders. Has anyone else had this problem.. Anyone know what to do??

    I'm having the exact same problem with my Nano Plus, and I've only had it for a little over 3 months. I contacted technical support and they told me to download the Firmware update and gave me these directions:
    Zen Nano Plus Firmware Update:
    http://uk.europe.creative.com/support/downloads/download2.asp?Product=2720&dlcentric=9423&Product_ Name=ZEN+Nano+Plus&OSName=Windows+XP
    To install this firmware upgrade, do the following:
    - Connect your player to your computer.
    - Double-click the firmware upgrade file.
    - When prompted to set your player in Recovery mode, disconnect your player from your computer.
    - Press and hold the Play button while connecting your player to your computer's USB port.
    - Continue to hold the Play button for about 0 seconds after connecting your player to your computer.
    - Release the Play button when the "Find New Hardware" dialog box appears on the computer screen.
    - Follow the instructions on the screen to install recovery drivers for your player.
    - Double-click the firmware upgrade file and follow the instructions on the screen. Ensure to select the "Format Data Area" option within the Update.
    However, at step 6 my computer did not recognize my player with it being on and neither did the Firmware. I responded to Technical Support and told them this. They said it seemed like it needed repaired or replaced! Even though there is a -year warranty, there is only a 3 month labor warranty, which means if you send it in to get fixed and it has passed the 3-month labor warranty, you have to pay a $24.95 diagnostics and handling fee. If you're in this situation, they said the best thing to do is try to exchange it wherever you bought it first. I hope this helps!

  • What video formats does zen v plus use?

    i use windows media player and i dont knwo which video format to convert my video to so i can sync it onto my player i have zen v plus i use windows media player i do know how to convert videos but i need to know which format.

    Bumping this thread for a reply from Creative staff. Surely somebody knows the behavior of the Zen V Plus firmware?
    Is it true that the current firmware of the Zen V Plus requires some sort of software sync with Windows XP before the charging "lightning bolt" logo will appear on it, and its battery will take a charge.
    Based on my testing (above), it seems as though plugging it into a passi've 5V USB power supply will supply energy to the player, and run the electronics from the power supply, but it will not charge the battery. Only my Windows XP laptop USB socket will charge the battery.
    Or is it possible that a particular set of charging voltages/currents must be present before the Zen V Plus charges? For example, a higher current than the 700ma and 000ma ratings of the two power adaptors I plugged it into?
    Thank You...

  • ZEN Nano Plus free

    Well, I have the following problem:
    Well for some reason my ZEN Nano Plus keeps showing the Creative logo, i just can be turned off by removing the battery. I tried the updater from the website (already using latest firmware). But whenever i connect my ZEN with the computer and try to access it my explorer freezes for at least -2 minutes or freezes completely...
    Plz help!

    I'm having the exact same problem with my Nano Plus, and I've only had it for a little over 3 months. I contacted technical support and they told me to download the Firmware update and gave me these directions:
    Zen Nano Plus Firmware Update:
    http://uk.europe.creative.com/support/downloads/download2.asp?Product=2720&dlcentric=9423&Product_ Name=ZEN+Nano+Plus&OSName=Windows+XP
    To install this firmware upgrade, do the following:
    - Connect your player to your computer.
    - Double-click the firmware upgrade file.
    - When prompted to set your player in Recovery mode, disconnect your player from your computer.
    - Press and hold the Play button while connecting your player to your computer's USB port.
    - Continue to hold the Play button for about 0 seconds after connecting your player to your computer.
    - Release the Play button when the "Find New Hardware" dialog box appears on the computer screen.
    - Follow the instructions on the screen to install recovery drivers for your player.
    - Double-click the firmware upgrade file and follow the instructions on the screen. Ensure to select the "Format Data Area" option within the Update.
    However, at step 6 my computer did not recognize my player with it being on and neither did the Firmware. I responded to Technical Support and told them this. They said it seemed like it needed repaired or replaced! Even though there is a -year warranty, there is only a 3 month labor warranty, which means if you send it in to get fixed and it has passed the 3-month labor warranty, you have to pay a $24.95 diagnostics and handling fee. If you're in this situation, they said the best thing to do is try to exchange it wherever you bought it first. I hope this helps!

  • Does zen v plus suppport Thai langua

    I am deciding to buy a mp3 player. I am selecting between creative zen v plus and ipod nano. I know ipod that someone can hack and make it support Thai, but for Zen, can do it's

    Bumping this thread for a reply from Creative staff. Surely somebody knows the behavior of the Zen V Plus firmware?
    Is it true that the current firmware of the Zen V Plus requires some sort of software sync with Windows XP before the charging "lightning bolt" logo will appear on it, and its battery will take a charge.
    Based on my testing (above), it seems as though plugging it into a passi've 5V USB power supply will supply energy to the player, and run the electronics from the power supply, but it will not charge the battery. Only my Windows XP laptop USB socket will charge the battery.
    Or is it possible that a particular set of charging voltages/currents must be present before the Zen V Plus charges? For example, a higher current than the 700ma and 000ma ratings of the two power adaptors I plugged it into?
    Thank You...

Maybe you are looking for

  • IPod cannot be updated.  The required file cannot be found.

    Hi, I have a 5G 30GB video iPod, which can't update to my iBook G4. I have tried the 5 Rs with no luck. I try to keep my music, videos and photos on my external hard drive to save space on my laptop. I found some photos on the laptop local hard drive

  • Business need to define credit limit based on material

    HI, Business need to define credit limit based on material,do we have option in SAP like this

  • AFAB transaction SAP 4.6 x ECC6

    Hello everybody In SAP 4.6 we have a substitution rule for AFAB transaction. It works well. Now, we are in Upgrade to ECC6. In SAP 4.6, the AFAB generates a RABUSCH folder to be execute in SM35. These rules were executed this moment. ( ( SYST-TCODE =

  • ORA-00932: inconsistent datatypes: expected %s got %s

    Hi All, I am facing the following error while querying a form. ORA-00932: inconsistent datatypes: expected %s got %s Can anyone please help me with this. Regards, Shruti

  • Quicktime 4.7 file type association hijacking

    I've got a really annoying little problem after upgrading to 7.6: The update also updated quicktime ( to 4.7) with ALL file types associations active. Arrogant to say the least, but just a nuisance nothing more. Problem is that I can't change them ba