Zen Vision M 30Gb and Windows 7

Hi. I have problem with my player. I installed windows 7 and zen media organizer 5. Windows and windows media player 2 detect player. If I want transfer music to my player by creative organizer, organizer writing ,,No Creative MP3 player is detected. Please connect your Mp3 player and try again". But really player is connect and i can use windows explorer to open music folder inside player.A player works as hard disk without problem. Do you know, how this problem solve? Thank you.

I know this thread is old, but I'm having this same issue. WMP2 will find it fine on my Windows 7 64-bit. When trying to use ZENCast Organizer, it will not connect. On top of that, none of the settings I set in ZENCast organizer related to the Zen Vision:M will stay set. Something to do with the use of ProgramData folder in Win 7?

Similar Messages

  • Creative Zen Vision M 30gb and Vista.

    Is there a way to get a Creative Zen Vision M 30gb to work on a Vista computer? It will save me buying my son a new MP3 player. Thanks.

    I've been in touch with Creative support for over a week now but so far without success. Every time I download links they suggest I still can't access Creative Media Explorer, I just keep getting this error message:-
    "The Creative Media Explorer that is compatible with this device is not installed. Please reinstall the application and try again"
    This has included deleting all previously installed Crteati've files as well as downloading in a 'Clean Boot'. I've also rebooted my Zen Vision M.
    At this rate I'll have to bin the Zen and look at an ipod:manmad:

  • Zen vision m 30gb and z

    When my zen vision m 30gb is sat in the z500 playdock everything functions as it should but the following day (if i have had it on about 5hours) the zen is dead and just flickers on when put back into z500 then stays off. I noticed that the battery is down to the red so i presume that is why it goes off. I thought itshould recharge whilst on z500!
    My zen does recharge separately with its own charger,it has the latest firmware so is the z500 faulty?or is it something else?any advice would be great!

    well,its still not charging and nobody has an answer

  • Vision:M 30GB and windows explorer

    hi
    I saw no mention of this in the manual but you can just copy/paste mp3's with Explorer (rather than via WMP0 or Creative bloatware).
    I was quite pleased about this (as I try to keep my PC fairly "clean").
    Are there any major disadvantages to this method ?
    At the moment, I'm not really interested in creating playlists...just filling up the player with mp3's and playing them (either by album or randomly).
    swayzak
    PS Is it true that ZEN Vision, version .40.03e firmware loses FM recording ? What's that all about then...:manmad:Message Edited by swayzak on 07-9-2006 05:5 AM

    I know this thread is old, but I'm having this same issue. WMP2 will find it fine on my Windows 7 64-bit. When trying to use ZENCast Organizer, it will not connect. On top of that, none of the settings I set in ZENCast organizer related to the Zen Vision:M will stay set. Something to do with the use of ProgramData folder in Win 7?

  • Creative zen vision price, 30gb, and 6

    hi all, i was just wondering how much does the zen vision: m costs ?
    i am sure that the 30gb model costs like 300 $ or so !
    but how much does the 60gb model costs ?
    anyone knows ?
    please tell !

    I've been in touch with Creative support for over a week now but so far without success. Every time I download links they suggest I still can't access Creative Media Explorer, I just keep getting this error message:-
    "The Creative Media Explorer that is compatible with this device is not installed. Please reinstall the application and try again"
    This has included deleting all previously installed Crteati've files as well as downloading in a 'Clean Boot'. I've also rebooted my Zen Vision M.
    At this rate I'll have to bin the Zen and look at an ipod:manmad:

  • Zen Vision M 30GB Warre

    Hello i own a creative zen vision m 30GB and no that the new creative zen has come out I have heard that they won't be making any hardisk MP3 players again so i was wondering if my Zen Vision M broke now would it still be coverd in warrenty and what would happen?

    Actually from what I have been reading, creative is working on another hard-dri've based player which is supposed to incorporate a lot of cool stuff. I am sure your m vision would be covered under their warranty given that you either purchased that extra warranty from them or have a problem within the manufacturers warranty.

  • Zen Vision:M 30Gb not connected (!) and I'm becoming crazy

    :Zen Vision:M 30Gb not connected (!) and I'm becoming crazyl Hi,
    I tried for week to do something with the Vision 30Gigs of my son, and I don't no what to do now, maybe open the window and throw the zen..
    No, seriously, he still remains in not connected and in Control Panel, system, device manager, always with the yellow sign blinking and tells that no driver is loaded.
    I'm in XP SP3, removed WinMediaPlayer to install the WMP 9 because the 0 is not compatible with SP3 I think,
    The zen is automatically in Recovery mode when boot, because I have tried all the possible and I have erased the firmware by "reload firmware" but without being connected to the computer,
    I tried the recovery tool, but not connected...
    So, I'm sure that some guru has the solution, and I'm convinced that this zen is not dead!
    Thanks in advance for your precious help.
    Ray

    Read everything before you start.
    Rayray wrote:
    Hi,
    I tried for week to do something with the Vision 30Gigs of my son, and I don't no what to do now, maybe open the window and throw the zen..
    No, seriously, he still remains in not connected and in Control Panel, system, device manager, always with the yellow sign blinking and tells that no driver is loaded.
    I'm in XP SP3, removed WinMediaPlayer to install the WMP 9 because the 0 is not compatible with SP3 I think,
    The zen is automatically in Recovery mode when boot, because I have tried all the possible and I have erased the firmware by "reload firmware" but without being connected to the computer,
    I tried the recovery tool, but not connected...
    So, I'm sure that some guru has the solution, and I'm convinced that this zen is not dead!
    Thanks in advance for your precious help.
    Ray
    You're right the Zen is not dead. It needs a firmware to work & it doesn't need to be connected to the computer to erase it. It does however need to be connected to a computer to reload it. First you will need to install WMP0. http://www.filehippo.com/download_wi...edia_player/9/
    You then need to charge the battery When its charged & turned back on you will choose Format>Cleanup. You then connect player to see that Windows can see the device. Once you can see that it is recognized in Device Manager you will Disconnect it from the computer (use rear usb ports)
    You will need to download the firmware file for the player to the desktop & open the file.(do this before you connect the player again)http://support.creative.com/Products...me=MP3+PlayersOn the player before you connect it to the computer that has the firmware file open & ready to go you will choose Reload firmware connect the player to the computer(use rear usb port) choose your language & let it run. (the autoplay window may open DO NOT CLOSE IT)
    The reason it did not work before with WMP9 is that the driver is a part of WMP0.

  • Zen Vision:M 30GB recognition problems...Big t

    Hi, 2 days ago i ran into a problem with my Zen. I had to charge it, as the battery was low and had to put some new music on it.. I plugged it into the USB port on my Laptop, where all of it's software is installed. The Zen wasn't recognized. Instead of the charging screen it normally started up with, it started up with the play screen(the screen it shows when a song is playing). I looked at the battery icon in the top right corner, and it wasn't doing anything. I turned the Zen off and started it up again. Nothing changed. I restarted my computer. Nothing changed. I shut down my computer and started it back up again. Nothing changed.
    I took it to my desktop computer, a Compaq, and tried it there. It worked, but not how i was expecting it to work. The battery icon started flashing with the little lightning bolt, acknowledging that it was charging. But the play screen was still there. The odd thing with this is, i left the player to charge for several hours. When i came back, the Zen was in some form of idle shut-down. The screen was black, except for the battery icon with the lightning bolt. Oddly enough, he battery bar hadn't filled up anymore than when i left it. Upon unplugging the player though, the Zen turned off. When i turned it back on, the bar had filled up more. It wasn't fully charged though.
    I plugged the cable back into it, and this time, the battery icon WASN'T charging. It just had the play screen on. It wasn't doing ANYTHING this time. Frustrated, i went out and bought the wall charger, and now i have a full battery. But it doesn't solve why my computer won't recognize my player.
    Today, i un-installed the software that came with the player and re-installed it. It didn't do anything. I installed the software on my desktop computer, and THAT didn't work either. So i came to the website here and used the trouble-shoot guide. That didn't help, and this is where my problem differs from the other posters here who have recognition problems:
    Back to my laptop: I have Windows Service Pack 2. I installed Windows Media Player . I went to the Device Manger, like the trouble-shoot guide said to. The kicker: Windows Portable Devices is NOT, i repeat NOT in my Device Manager. Neither does the Creative player either. I clicked on "The player does not appear in Device manager". That link showed me a diagram of a desktop computer, so went back to my desktop computer. I did everything above mentioned, and Windows Portable Devices is not in the device manager of my desktop computer either. Further reading the trouble-shoot guide, i could NOT locate "Other Devices" or "Unknown Devices" in my Device Manger on either desktop or laptop. There's nothing "Creative" related or "Zen" related at all in any of the Device programs.
    I don't know what to do. All of the trouble-shoot guides don't discuss my issue at all. Everything is "If an MP3 player is reported working properly in Device Manager, but it is not detected or listed in Windows Media Player or Creative Media Explorer..."
    Mine isn't even detected in Device Manager. My Device Manager has nothing regarding my Zen or Windows Portable Devices.
    I'm thinking about messing with it in Recovery mode, but i don't want to erase everything i have on here, just to have my player still not work. I'm going to try messing with this at my friend's house to check the cable and the player there too.
    But any help regarding my situation would be greatly appreciated. This is driving me crazy.

    I tried my uncle's Zen Vision: M 30GB on my laptop and strange things happened. My laptop recognized the player as an unknown device and said i needed to install the MTP driver. I did that, and upon doing so, my laptop recognized my Uncle's player as a Portable device, allowing me to transfer songs to his player. But it STILL doesn't recognize MY player. Email support says i have to send it in for repairs, but i don't know...
    Any luck with you?

  • Creative zen : vision M 30gb strange problem

    ,Creative zen : vision M 30gb strange problem. Hi people,
    My mp3 player is 2 and a half years old. A few months ago he didn't charge anymore. ?I thought i could repair it by buying a new battery and install him in my mp3.
    Afther a few ours of ?assembling it was ready for charging a thought..
    I used the usb charger and de sync adapter...
    the morning after, my mp3 is not charged and only showing me a little red stripe in de battery (right top) i can listen music but only for a few minutes...
    Also my PC does noet see my MP3
    tested on :
    windows xp service pack 3?
    vista?
    windows 7?
    please help me
    Stijn van Vilsteren?
    DUTCH?
    i am sorry for my pore english !

    Squipy wrote:
    Hi, I stopped using this MP3 for about 2 or so years because I bought a new one. I decided to start using it again and downloaded all the required software but as soon as I unplugged the MP3 from the power outlet, the player died. I can't get it to start up without plugging it into a power outlet. I think it has rechargable battery? Why didn't it recharge itself?
    My second enquiry is about the capacity of the player. When my player was empty, I went into "Information" and it said Total Space: 28GB and Free Space: 2GB. Why is free space only 2GB? Shouldn't it be 28 as well?
    Thanks in advance!
    The battery will only last about 3yrs regardless of use.You will need to change it. Did you scroll down to see the album,picture,track counts? Did you partition part of the dri've for removable storage. You can find instructions to open here ? http://www.youtube.com/watch?v=_Drkr...e=channel_page & ? the battery here(very easy to do) http://cgi.ebay.com/Original-Creative-ZEN-Vision-M-30gb-Battery-LPCS285385_W0QQitemZ400028645679QQcmdZViewItemQQpt ZOther_MP3_Player_Accessories?hash=item40002864567 9&_trksid=p39.c0.m4&_trkparms=72%3A205|66%3A4|65%3 A2|39%3A|240%3A38|30%3A0|293%3A|294%3A200

  • Creative Zen Vision M (30gb) - Is it the end?

    Hi all,
    I've read a lot of posts and think the only way to find a possible solution to my problem is to just post it....
    I've had my Creative Zen Vision M (30gb) for about?2.5 years, apart from crashing a few times, I've always loved it and would never go near Ipod!
    Lately however it's done something, that it has done before which is to suddenly 'remove' about 2000 tracks, it would go funny, crash and reset a few times, recharge with the plug and it was fine again, the tracks 'reappeared'.
    Now it seems when it happened this recent time, 3000 tracks went and I was left with about 000. So i tried formatting everything cause it just wouldn't rectify itself, then I chose to reload the firmware but everytime I tried to connect it to my laptop it would say my player wasn't connected.
    I have recently baught a new laptop with Windows 7 and even without the software it detects it fine and I think I could just drag music over to it now. BUT - It only has 50mb of memory! Plsu MP3 Recovery Tool and online detection firmware thingy justy doesn't think my player is connected or says cannot update firmware on windows 7?
    So my questions?are - how do i fix it's Is my memory fried, would it be worth getting out the old laptop? Where do i go if i want to repair it's Even if it detects it in XP, the software doesn't detect the player.
    Can anyone shine any light here? Am I forced to buy another Creative product or do I jump ship?

    If the XP computer has WMP installed it may not detect the player (the firmware file) It works best on XP /SP2 WMP0 installed. The issue with WMP is a sticky in the MP3 players forum.

  • Zen Vision M 30GB Problems

    Zen Vision M 30GB Problems? I have a used Zen Vision M 30 GB. I have?a few questions, along with some problems.
    My player has to "rebuild" at least twice a day, is that normal?
    When a song is playing, is the song name, length of song, etc supposed to be displayed?
    Now the major problem:
    I can not get either my laptop or desktop to recognize my player.
    On the desktop (Windows XP?SP3)?it seems to constantly refresh the Device Manager as an MTP device. while it continues to do this I can see the device is giving me a Code 0.
    On the laptop (Windows Vista) it searches for a driver, but the search fails. It does not continuously refresh, but still gives me the same "Code 0 This device can not start" message.
    On both computers it says "Docked" on the player when plugged in and also charges.
    The player plays well once it makes it through the "Rebuilding" stage.
    I thought about formatting it, but?I was not sure that would do any good with this problem. Plus there was a lot of music left on the player from the previous owner that I rather like.
    Any help would be greatly appreciated,? Thanks

    smittyknox wrote:
    I have a used Zen Vision M 30 GB. I have?a few questions, along with some problems.
    My player has to "rebuild" at least twice a day, is that normal?
    When a song is playing, is the song name, length of song, etc supposed to be displayed?
    Now the major problem:
    I can not get either my laptop or desktop to recognize my player.
    On the desktop (Windows XP?SP3)?it seems to constantly refresh the Device Manager as an MTP device. while it continues to do this I can see the device is giving me a Code 0.
    On the laptop (Windows Vista) it searches for a driver, but the search fails. It does not continuously refresh, but still gives me the same "Code 0 This device can not start" message.
    On both computers it says "Docked" on the player when plugged in and also charges.
    The player plays well once it makes it through the "Rebuilding" stage.
    I thought about formatting it, but?I was not sure that would do any good with this problem. Plus there was a lot of music left on the player from the previous owner that I rather like.
    Any help would be greatly appreciated,? Thanks
    No rebuilding that often if not normal. You seem to be having symptoms of hardri've issues. Now have you done a cleanup>reboot on the player?CHARGE PLAYER BEFORE DOING THIS? http://forums.creative.com/creativel...ap&thread.id=3? That may help with the constant need to rebuild(kinda like defragging the dri've) Use a REAR usb port when connecting to the computer & try using a different usb cable. DO NOT CHOOSE RELOAD FIRMWARE ON THE RECOVERY MENU

  • Zen Vision M 30Gb Battery Prob

    My zen vision m 30gb player can not hold battery charge. The battery when charged fully will drain out without usage. When charged fully and in use, the charge will last for only 2 to 5 minutes instead of the 5 to 0 hours it use to last. Can any one help me with this problem please? The firmware I am using is v .62.02_0.0.23 and my operating system is windows XP professional with service patch 3. I have done clean-up and reboot, the only thing I have not done is reformatting the player.

    branbran,
    Based on your description, it would be advisable to get in touch with support. Check the "Support" folder on your installation CD for Customer Support contact details.

  • Zen vision M 30GB blank white screen

    I have scanned the forum for a smiliar problem but I need more help.
    My Zen vision M, 30GB player is a 2004 model, my Operating system is Windows Vista, 32-bit. I'm not sure what firmware I have on my player. As of last week, I have only a blank white screen; I have backed up all my contents and dowloaded the recovery tool with no result.
    After contacting Customer service, they sent me to the forum to look for help or buy a new unit...just want to make sure there is no other recourse I can pursue.

    A white screen can not be repaired it must be replaced. It is a hardware issue not software. You can do it yourself. Purchase another screen & replace it. I have done this many times. Instructions for opening & disassembly of the player here http://www.youtube.com/profile?user=...u//_Drkr3ou22E Source to purcahse another screen here. http://cgi.ebay.com/Creative-ZEN-Vis...item5d25d8dbcb

  • Zen Vision M 30Gb Install Probl

    So I just got my Zen Vision M 30Gb today and I plugged it into my computer. It started charging and then my computer finally recognized it and tried to do the normal driver install, but for some reason it doesn't seem to have completely installed the drivers. So I unplugged it and tried it again, but it did the same thing once again. Is this normal? Is there anything I need to do? Or do I just need to wait till the Zen is completely recharged then unplug it and replug it back in? Any help is appreciated guys. Thanks!Message Edited by NslMatt on 03-0-200709:35 PM

    are you using Windows XP?
    Ever tried to install the included software before plugging the mp3 player to your PC?

  • I Need Help With My Zen Vision M 30GB Player ASAP

    Tonight i had started deleting of my music folders on my creative zen vision m 30gb player and as it was doing that i accidently disconnected the usb cable from the player. After that the player was froze on the docking mode and i hit the reset button with a paper clip. Then after that for some strange reason my computer does not detect my zen vision m player as being connected to the computer. the docked screen appears on my player but the arrows keep spinning and my pc keeps saying found new hardware mtp device and does nothing but repeat that over and over again. I run windows xp pro service pack 2 with windows media player installed. I really need help asap to resolve this issue and have my pc reconize it normal again where i can access my music folders and playlists again.

    The core problem is related to Microsoft Windows Media . To resolve the issue, you need to uninstall MWM v from the Add/Remove Programs. Then it will rollback to MWM v9. Unplug the player from the USB port. Reinstall the supplied software from Creative if you need too. Reboot, plug the device into the USB port. Reinstall the device driver for the MP3 player. Reload the latest firmware. The file can be downloaded at
    http://support.creative.com/downloads/download.aspx?nDownloadId=03

Maybe you are looking for

  • MOVED: MediaLive/6150LE TV-out stopped working

    This topic has been moved to Mega PC series. https://forum-en.msi.com/index.php?topic=113397.0

  • APEX 4: Cascading LOV generic?

    Is it possible to have a "generic" cascading LOV? I prefer to have my LOV as shared components (reuse and such) but with a cascading LOV the detail list refers to the Parent item within the query. This makes for a not very reusable LOV in my opinion.

  • Opening a frame with button click

    hi all when i am going to click a button which is placed in JTabel it should open a JFrame with some component. thanks & regards daya

  • Migration problem from NW 04s to NW 7.1 CE

    Hi, Our project (based on Java Webdynpro tech.) has to be migrated from NW 04s to NW 7.1 CE. We have a new track and everything that is needed. The problem is that is seems to be that 7.1 is compatible backward to 04s according to the documentation s

  • Could not release request in abap program

    hi, while transporting a program i am facing this error. help me. Object CUAD ZSIPM_PROD_DETAILS is inactive Message no. EU829 Diagnosis You tried to release a transport request, but object CUAD ZSIPM_PROD_DETAILS is still in its inactive version. Sy