Zen Vision:M 30GB Player Prob

The problem is that my Zen Vision:M 30GB Player is stuck in recovery mode. I turned it on the other day with no previous problems, and now it only goes to recovery mode. The player is detected when I plug it in, but it does not leave recovery mode.
I have tried:
) Cleaning Up
2) Formatting
3) Rebooting many times
4) Reloading firmware
All to no avail. When I try to reload the firmware on my computer by using the MP3 Player recovery tool it says "Upgrade Failed" at the end. I even tried downloading the firmware and upgrading it manually, but it only ended in the same outcome.
My firmware is v.62.02_0.0.23?
Any help is much appreciated.

branbran,
Based on your description, it would be advisable to get in touch with support. Check the "Support" folder on your installation CD for Customer Support contact details.

Similar Messages

  • Zen Vision M 30Gb Battery Prob

    My zen vision m 30gb player can not hold battery charge. The battery when charged fully will drain out without usage. When charged fully and in use, the charge will last for only 2 to 5 minutes instead of the 5 to 0 hours it use to last. Can any one help me with this problem please? The firmware I am using is v .62.02_0.0.23 and my operating system is windows XP professional with service patch 3. I have done clean-up and reboot, the only thing I have not done is reformatting the player.

    branbran,
    Based on your description, it would be advisable to get in touch with support. Check the "Support" folder on your installation CD for Customer Support contact details.

  • I Need Help With My Zen Vision M 30GB Player ASAP

    Tonight i had started deleting of my music folders on my creative zen vision m 30gb player and as it was doing that i accidently disconnected the usb cable from the player. After that the player was froze on the docking mode and i hit the reset button with a paper clip. Then after that for some strange reason my computer does not detect my zen vision m player as being connected to the computer. the docked screen appears on my player but the arrows keep spinning and my pc keeps saying found new hardware mtp device and does nothing but repeat that over and over again. I run windows xp pro service pack 2 with windows media player installed. I really need help asap to resolve this issue and have my pc reconize it normal again where i can access my music folders and playlists again.

    The core problem is related to Microsoft Windows Media . To resolve the issue, you need to uninstall MWM v from the Add/Remove Programs. Then it will rollback to MWM v9. Unplug the player from the USB port. Reinstall the supplied software from Creative if you need too. Reboot, plug the device into the USB port. Reinstall the device driver for the MP3 player. Reload the latest firmware. The file can be downloaded at
    http://support.creative.com/downloads/download.aspx?nDownloadId=03

  • Zen Vision M: 30GB//Player gets stuck @ "ZEN vision M" lo

    Alright, this player loads, but it freezes at the "ZEN Vision M" logo (as I said in the subject). I tried formatting it, and all those other options on the boot menu, except for updating the firmware (I can't, since I do not own Windows Media Center anymore). The warranty is past it's date, and I am not sure what else to do. Any suggestions, because I do not feel like going out and buying a new one. I'd like to send it somewhere to get it fixed but I'm pretty sure that I wouldn't be able to do that.

    branbran,
    Based on your description, it would be advisable to get in touch with support. Check the "Support" folder on your installation CD for Customer Support contact details.

  • Zen Vision M 30gb Connection Prob

    Hello,?After using my Zen for months without any problems, yesterday, I couldn't make my player recognized by either Windows Media Player or Zen Vision:M Media Explorer. I made a big search on the internet, found too many posts, followed the instructions and nothing happened. - My operating system is SP2 installed Windows XP.- My Zen is fully charged.- I tried all 6 USB inputs.- I also tried three different USB cables.- In Device Manager, I can see my Zen with the name "Creative Zen Vision:M" under the Portable Devices category. No problems, no question marks, no conflicts...- I made the "Permissions for Everyone" change from Registry. People recommended me to install the latest firmware but it also says "your device is not connected". Then in another forum, I noticed that some people are experiencing problems with Media Player . I tried to uninstall it but couldn't do that, too! I tried to rollback the drivers, nothing happened. I tried to delete the files and registry keys, nothing happened. I tried to install Media Player 0 on , of course nothing happened. I want my Zen back! Your suggestions will be very much appreciated. )?Thanks,Ozan.

    branbran,
    Based on your description, it would be advisable to get in touch with support. Check the "Support" folder on your installation CD for Customer Support contact details.

  • Zen Vision M 30gb huge prob

    This is the second time this has happened to my Zen Vision M player, everything works fine on it for a couple of months and then the screen starts having issues. (I don't mistreat my player or leave it on for huge amounts of time or watch videos on it - for the record)
    The issue I had to begin with was when it was booting up the screen had lines across it and the picture was grainy and weak, but on the menu screens everything looked fine.
    I just turned my player on today and the problem had spread to the menu.
    Has anyone else had this problem? Can it be fixed or what should I do?

    If you need more information i'd be willing to read out the information from the player or record a video of my zen being booted up so you could see what the problem is.

  • Zen Vision M 30gb Prob

    I have a relati'vely new Zen Vision M 30gb player, which as of today stopped working.
    It will not turn on, will not charge or interface with the computer. When plugged into the computer a blue light flashes at the top of the player, and the same occurs when attempting to turn on. I have tried recovery mode to no avail and the resets do naught.
    Can anyone help me with this problem?

    No helping me. I just got mine about 5 weeks ago and its been working great. I charged it overnight last night to take to the gym and it didn't work. So I though that maybe the outlet I charged it on was popped or something. I verified that it worked. I plugged it in again and I have the blue light, but I just chekced and the battery meter barely had a line, and that was after 7 hours. I unplugged it and it wouldn't turn on. Any idea. I am currently charging it now and there is a blue light again. It just doesn;t seem to hold a charge

  • Zen vision M 30GB blank white screen

    I have scanned the forum for a smiliar problem but I need more help.
    My Zen vision M, 30GB player is a 2004 model, my Operating system is Windows Vista, 32-bit. I'm not sure what firmware I have on my player. As of last week, I have only a blank white screen; I have backed up all my contents and dowloaded the recovery tool with no result.
    After contacting Customer service, they sent me to the forum to look for help or buy a new unit...just want to make sure there is no other recourse I can pursue.

    A white screen can not be repaired it must be replaced. It is a hardware issue not software. You can do it yourself. Purchase another screen & replace it. I have done this many times. Instructions for opening & disassembly of the player here http://www.youtube.com/profile?user=...u//_Drkr3ou22E Source to purcahse another screen here. http://cgi.ebay.com/Creative-ZEN-Vis...item5d25d8dbcb

  • Can not turn on my Zen Vision M 30gb pla

    Hi, Sorry to bother you guys, but my Zen Vision M 30gb player can not be turned on. When I was listening to the music, it suddenly freezing. I can not turn it off or reset it. After a while it is off automatically and can not be turned on anymore and reset also doesn't work. When I connect it to the pc. nothing really happen except the swith keeps flashing, and the pc also doesn't recognize it. Did anybody have the same experience or same problem I really appreciate it if you can help me with it. Thanks! Ning

    Sounds like you need to replace the battery here's the info to open the player for that? http://www.youtube.com/watch?v=akJDRpx6rA8? Here's a link to get a battery for the player? http://www.infinitybatteries.com/p-4...n-polymer.aspx

  • Zen Vision:M 30GB recognition problems...Big t

    Hi, 2 days ago i ran into a problem with my Zen. I had to charge it, as the battery was low and had to put some new music on it.. I plugged it into the USB port on my Laptop, where all of it's software is installed. The Zen wasn't recognized. Instead of the charging screen it normally started up with, it started up with the play screen(the screen it shows when a song is playing). I looked at the battery icon in the top right corner, and it wasn't doing anything. I turned the Zen off and started it up again. Nothing changed. I restarted my computer. Nothing changed. I shut down my computer and started it back up again. Nothing changed.
    I took it to my desktop computer, a Compaq, and tried it there. It worked, but not how i was expecting it to work. The battery icon started flashing with the little lightning bolt, acknowledging that it was charging. But the play screen was still there. The odd thing with this is, i left the player to charge for several hours. When i came back, the Zen was in some form of idle shut-down. The screen was black, except for the battery icon with the lightning bolt. Oddly enough, he battery bar hadn't filled up anymore than when i left it. Upon unplugging the player though, the Zen turned off. When i turned it back on, the bar had filled up more. It wasn't fully charged though.
    I plugged the cable back into it, and this time, the battery icon WASN'T charging. It just had the play screen on. It wasn't doing ANYTHING this time. Frustrated, i went out and bought the wall charger, and now i have a full battery. But it doesn't solve why my computer won't recognize my player.
    Today, i un-installed the software that came with the player and re-installed it. It didn't do anything. I installed the software on my desktop computer, and THAT didn't work either. So i came to the website here and used the trouble-shoot guide. That didn't help, and this is where my problem differs from the other posters here who have recognition problems:
    Back to my laptop: I have Windows Service Pack 2. I installed Windows Media Player . I went to the Device Manger, like the trouble-shoot guide said to. The kicker: Windows Portable Devices is NOT, i repeat NOT in my Device Manager. Neither does the Creative player either. I clicked on "The player does not appear in Device manager". That link showed me a diagram of a desktop computer, so went back to my desktop computer. I did everything above mentioned, and Windows Portable Devices is not in the device manager of my desktop computer either. Further reading the trouble-shoot guide, i could NOT locate "Other Devices" or "Unknown Devices" in my Device Manger on either desktop or laptop. There's nothing "Creative" related or "Zen" related at all in any of the Device programs.
    I don't know what to do. All of the trouble-shoot guides don't discuss my issue at all. Everything is "If an MP3 player is reported working properly in Device Manager, but it is not detected or listed in Windows Media Player or Creative Media Explorer..."
    Mine isn't even detected in Device Manager. My Device Manager has nothing regarding my Zen or Windows Portable Devices.
    I'm thinking about messing with it in Recovery mode, but i don't want to erase everything i have on here, just to have my player still not work. I'm going to try messing with this at my friend's house to check the cable and the player there too.
    But any help regarding my situation would be greatly appreciated. This is driving me crazy.

    I tried my uncle's Zen Vision: M 30GB on my laptop and strange things happened. My laptop recognized the player as an unknown device and said i needed to install the MTP driver. I did that, and upon doing so, my laptop recognized my Uncle's player as a Portable device, allowing me to transfer songs to his player. But it STILL doesn't recognize MY player. Email support says i have to send it in for repairs, but i don't know...
    Any luck with you?

  • Creative Zen Vision M 30gb and Vista.

    Is there a way to get a Creative Zen Vision M 30gb to work on a Vista computer? It will save me buying my son a new MP3 player. Thanks.

    I've been in touch with Creative support for over a week now but so far without success. Every time I download links they suggest I still can't access Creative Media Explorer, I just keep getting this error message:-
    "The Creative Media Explorer that is compatible with this device is not installed. Please reinstall the application and try again"
    This has included deleting all previously installed Crteati've files as well as downloading in a 'Clean Boot'. I've also rebooted my Zen Vision M.
    At this rate I'll have to bin the Zen and look at an ipod:manmad:

  • Creative zen : vision M 30gb strange problem

    ,Creative zen : vision M 30gb strange problem. Hi people,
    My mp3 player is 2 and a half years old. A few months ago he didn't charge anymore. ?I thought i could repair it by buying a new battery and install him in my mp3.
    Afther a few ours of ?assembling it was ready for charging a thought..
    I used the usb charger and de sync adapter...
    the morning after, my mp3 is not charged and only showing me a little red stripe in de battery (right top) i can listen music but only for a few minutes...
    Also my PC does noet see my MP3
    tested on :
    windows xp service pack 3?
    vista?
    windows 7?
    please help me
    Stijn van Vilsteren?
    DUTCH?
    i am sorry for my pore english !

    Squipy wrote:
    Hi, I stopped using this MP3 for about 2 or so years because I bought a new one. I decided to start using it again and downloaded all the required software but as soon as I unplugged the MP3 from the power outlet, the player died. I can't get it to start up without plugging it into a power outlet. I think it has rechargable battery? Why didn't it recharge itself?
    My second enquiry is about the capacity of the player. When my player was empty, I went into "Information" and it said Total Space: 28GB and Free Space: 2GB. Why is free space only 2GB? Shouldn't it be 28 as well?
    Thanks in advance!
    The battery will only last about 3yrs regardless of use.You will need to change it. Did you scroll down to see the album,picture,track counts? Did you partition part of the dri've for removable storage. You can find instructions to open here ? http://www.youtube.com/watch?v=_Drkr...e=channel_page & ? the battery here(very easy to do) http://cgi.ebay.com/Original-Creative-ZEN-Vision-M-30gb-Battery-LPCS285385_W0QQitemZ400028645679QQcmdZViewItemQQpt ZOther_MP3_Player_Accessories?hash=item40002864567 9&_trksid=p39.c0.m4&_trkparms=72%3A205|66%3A4|65%3 A2|39%3A|240%3A38|30%3A0|293%3A|294%3A200

  • Creative Zen Vision M (30gb) - Is it the end?

    Hi all,
    I've read a lot of posts and think the only way to find a possible solution to my problem is to just post it....
    I've had my Creative Zen Vision M (30gb) for about?2.5 years, apart from crashing a few times, I've always loved it and would never go near Ipod!
    Lately however it's done something, that it has done before which is to suddenly 'remove' about 2000 tracks, it would go funny, crash and reset a few times, recharge with the plug and it was fine again, the tracks 'reappeared'.
    Now it seems when it happened this recent time, 3000 tracks went and I was left with about 000. So i tried formatting everything cause it just wouldn't rectify itself, then I chose to reload the firmware but everytime I tried to connect it to my laptop it would say my player wasn't connected.
    I have recently baught a new laptop with Windows 7 and even without the software it detects it fine and I think I could just drag music over to it now. BUT - It only has 50mb of memory! Plsu MP3 Recovery Tool and online detection firmware thingy justy doesn't think my player is connected or says cannot update firmware on windows 7?
    So my questions?are - how do i fix it's Is my memory fried, would it be worth getting out the old laptop? Where do i go if i want to repair it's Even if it detects it in XP, the software doesn't detect the player.
    Can anyone shine any light here? Am I forced to buy another Creative product or do I jump ship?

    If the XP computer has WMP installed it may not detect the player (the firmware file) It works best on XP /SP2 WMP0 installed. The issue with WMP is a sticky in the MP3 players forum.

  • Zen Vision M 30GB Problems

    Zen Vision M 30GB Problems? I have a used Zen Vision M 30 GB. I have?a few questions, along with some problems.
    My player has to "rebuild" at least twice a day, is that normal?
    When a song is playing, is the song name, length of song, etc supposed to be displayed?
    Now the major problem:
    I can not get either my laptop or desktop to recognize my player.
    On the desktop (Windows XP?SP3)?it seems to constantly refresh the Device Manager as an MTP device. while it continues to do this I can see the device is giving me a Code 0.
    On the laptop (Windows Vista) it searches for a driver, but the search fails. It does not continuously refresh, but still gives me the same "Code 0 This device can not start" message.
    On both computers it says "Docked" on the player when plugged in and also charges.
    The player plays well once it makes it through the "Rebuilding" stage.
    I thought about formatting it, but?I was not sure that would do any good with this problem. Plus there was a lot of music left on the player from the previous owner that I rather like.
    Any help would be greatly appreciated,? Thanks

    smittyknox wrote:
    I have a used Zen Vision M 30 GB. I have?a few questions, along with some problems.
    My player has to "rebuild" at least twice a day, is that normal?
    When a song is playing, is the song name, length of song, etc supposed to be displayed?
    Now the major problem:
    I can not get either my laptop or desktop to recognize my player.
    On the desktop (Windows XP?SP3)?it seems to constantly refresh the Device Manager as an MTP device. while it continues to do this I can see the device is giving me a Code 0.
    On the laptop (Windows Vista) it searches for a driver, but the search fails. It does not continuously refresh, but still gives me the same "Code 0 This device can not start" message.
    On both computers it says "Docked" on the player when plugged in and also charges.
    The player plays well once it makes it through the "Rebuilding" stage.
    I thought about formatting it, but?I was not sure that would do any good with this problem. Plus there was a lot of music left on the player from the previous owner that I rather like.
    Any help would be greatly appreciated,? Thanks
    No rebuilding that often if not normal. You seem to be having symptoms of hardri've issues. Now have you done a cleanup>reboot on the player?CHARGE PLAYER BEFORE DOING THIS? http://forums.creative.com/creativel...ap&thread.id=3? That may help with the constant need to rebuild(kinda like defragging the dri've) Use a REAR usb port when connecting to the computer & try using a different usb cable. DO NOT CHOOSE RELOAD FIRMWARE ON THE RECOVERY MENU

  • Zen Vision:M 30Gb not connected (!) and I'm becoming crazy

    :Zen Vision:M 30Gb not connected (!) and I'm becoming crazyl Hi,
    I tried for week to do something with the Vision 30Gigs of my son, and I don't no what to do now, maybe open the window and throw the zen..
    No, seriously, he still remains in not connected and in Control Panel, system, device manager, always with the yellow sign blinking and tells that no driver is loaded.
    I'm in XP SP3, removed WinMediaPlayer to install the WMP 9 because the 0 is not compatible with SP3 I think,
    The zen is automatically in Recovery mode when boot, because I have tried all the possible and I have erased the firmware by "reload firmware" but without being connected to the computer,
    I tried the recovery tool, but not connected...
    So, I'm sure that some guru has the solution, and I'm convinced that this zen is not dead!
    Thanks in advance for your precious help.
    Ray

    Read everything before you start.
    Rayray wrote:
    Hi,
    I tried for week to do something with the Vision 30Gigs of my son, and I don't no what to do now, maybe open the window and throw the zen..
    No, seriously, he still remains in not connected and in Control Panel, system, device manager, always with the yellow sign blinking and tells that no driver is loaded.
    I'm in XP SP3, removed WinMediaPlayer to install the WMP 9 because the 0 is not compatible with SP3 I think,
    The zen is automatically in Recovery mode when boot, because I have tried all the possible and I have erased the firmware by "reload firmware" but without being connected to the computer,
    I tried the recovery tool, but not connected...
    So, I'm sure that some guru has the solution, and I'm convinced that this zen is not dead!
    Thanks in advance for your precious help.
    Ray
    You're right the Zen is not dead. It needs a firmware to work & it doesn't need to be connected to the computer to erase it. It does however need to be connected to a computer to reload it. First you will need to install WMP0. http://www.filehippo.com/download_wi...edia_player/9/
    You then need to charge the battery When its charged & turned back on you will choose Format>Cleanup. You then connect player to see that Windows can see the device. Once you can see that it is recognized in Device Manager you will Disconnect it from the computer (use rear usb ports)
    You will need to download the firmware file for the player to the desktop & open the file.(do this before you connect the player again)http://support.creative.com/Products...me=MP3+PlayersOn the player before you connect it to the computer that has the firmware file open & ready to go you will choose Reload firmware connect the player to the computer(use rear usb port) choose your language & let it run. (the autoplay window may open DO NOT CLOSE IT)
    The reason it did not work before with WMP9 is that the driver is a part of WMP0.

Maybe you are looking for

  • How do I delete an email address in Tbird?

    I want to delete one of my email addresses, because, ever though it is the "Default" email address, I can't use it. I don't get all my emails from friends or colleagues that I had before switching to Thunderbird???

  • Fast free shipping = shipping in ~5 days with a slow ground method?

    I may be pleasantly surprised here, since I know ship and delivery times are conservative estimates, but I am finding it strange that the iPad I just purchased won't ship for up to 5 days and appears to be using a slow ground method that may tack 5+

  • Pages and Numbers quit unexpectedly while being used loosing all completed work.

    What can I do to "repair" both the Pages and Numbers software. They both quit unexpectedly while being used resulting in a loss of all completed work. I have tried re-purchasing the software; but can't since it is already installed. I have tried upda

  • I Require standard names for Sapscript form

    hai to all , would any body help me in finding the standard sapscripts forms names and their correponding standard print programs for the following topics; 1. RFQ 2. QUOTATION 3. CONTRACT 4. CUSTOMER STATEMENT 5. FI-INVOICE 6. FI-CREDIT MEMO 7. DUNNI

  • Manual Gross Weight from Handling Unit to Outbound Delviery

    Hi Friends, I have a question related to gross weight replication from HU to outbound delivery document.  During delivery process, for packing, system calculates the gross weight on the basis of weight from the material master however the weight is n