Zen Vision M 30Gb Plz Help Me Out I Dont Know What To

i bought the zen vision m about 9 months ago adn everything worked fine but now i try to charge it via USB and the wierd part is windows doesnt detect de player but the players blue lamp is flikking and sometime the battery shows up but it wont charge plz help me out!Message Edited by Mudahedin on 02-5-20080:06 PM

Is your iPhone jailbroken?
Which version of Cydia do you have - the one with the
blue icon?

Similar Messages

My Zen MicroPhoto goes straight to Recovery Mode and I dont know what to

Hey, I need help figuring out why does my Zen MicroPhoto goes into recovery mode now by itself. I had difficulties with the same issue with a Zen Micro. My Zen MicroPhoto had issues in the past where it would spontaniously restart and rebuild the library. I would one second listen to music on the bus and sit down slowly, then the music cuts and the zen microphoto resets itself. Can I get some help here?! I really dont want to resort to sending it out for repairs unless its a last resort.

lauren842012 wrote:
help my iphone 3g is stuck on recovery mode and i dont know what to do as its my first iphone and i got it second hand i stupidly tried to reset it on my laptop and i think i have buggered it up but i also got it unlocked a few days ago and i am worried i wont be able to use my 3sim in it anymore need help and ideas
thanks ......
Press and hold the Home and Power buttons on your iPhone until it shuts off.
Connect it connect it to your computer with th USB cable.
Press and hold down the Home button.
Hold it it down until iTunes says your device is entering recovery mode.
Now you should be able to Restore using iTunes.

Zen Vision:M 30GB - NEED HELP TO RESET PLEASE

Here is the problem just experienced. Have owned just under one year and purchased an alarm clock radio that is iPod adaptable. It was by Memorex. Now we know this is not an iPod so we followed the instructions that state compatible for ALL OTHER?mp3 players with use of?an line-in cable to the radio alarm clock. As soon as we plugged it in...it lite up and went to the CREATIVE screen and froze there. Will NOT shut off, cannot be recognized by the computer any more, and when using a paperclip it will power down as long as the paperclip is there, but will then go RIGHT BACK to CREATIVE and is just frozen there. HELP - PLEASE HELP..How do we reboot it from this situation. Has anyone else experienced an issue like this? I AM SICK TO MY STOMACH OVER THIS
!!! WHAT HAPPENED !!!!

johnnnyp wrote:
hi, i have a problem with my creative vision m. i wanted to watch a movie and it froze. i tried to shut it down but it wouldnt respond, and now is frozen. please help me if you can!
You know its kinda rude to derail XBenzinoFla thread with your own problems, make your own thread next time.
But to the both of you especially XBenzinoFla, try putting your ZVM in rescue mode and run scan disk to see if it hel
ps.

Help!! i dont know what to do

Hi,
I have been having some difficulty with my ipod. Im not sure if something messed up on my ipod or if it is itunes. Anyway i was downloading some new songs and a box popped up saying that there wasnt enough space and that i needed to delete some files. I had the chocie of canceling or it said create new playlist from selection. I accidently clicked on create new playlist from selection. Next thing i know all my playlists were deleted except for one that had the songs in it. But then that one got deleted to and now my ipod has nothing on it. And now when i try to plug my ipod in and sync it it says songs on the ipod cannot be synced because all of the playlists selected for syncing no longer exist.
Can some one please help?!?
Thank you.

Click here and follow the instructions.
(33364)

HELP dont know what to do!!

Hi, Just wondering if anyone can help! I really dont know what to do! I am trying to restore my ipod and it says when i click retore 'firm wire disk write error' i really dont know what do about that just wondering if anyone knows here?? Thanks

The thing is, that you must try the suggestions in that article. There are other things that you can try in this post also.
http://discussions.apple.com/message.jspa?messageID=1533747#1533747
They're not easy to follow if you're not computer savvy. Do you have someone at home who can assist and take you through the steps?
There is also a simple thing you can try such as trying another port on your computer. Some ports are not connected direct to the motherboard and do not recognize the iPod as well as those that are. Reset the iPod each time you connect it to another port.
The error means that the computer is having a hard time writing data to the iPod's hard drive, and there could be many reasons for this.
How about taking the iPod to an Apple store? Isn't there one at the Trafford centre?

On the bar i have floppy below apple tv i dont know what is it but when i click ineed to give a password. I tried with my apple id but doesnt work can someone help?

Help with floppy i dont know what is it

I apologize if i am not clear
Now i am on my apple tv and i clicked on airplay
On the screen looks like this
Airply
Onscreen code
Set password
Apple tv
Floppy
I have no clue what floppy is and how to access it

I Need Help With My Zen Vision M 30GB Player ASAP

Tonight i had started deleting of my music folders on my creative zen vision m 30gb player and as it was doing that i accidently disconnected the usb cable from the player. After that the player was froze on the docking mode and i hit the reset button with a paper clip. Then after that for some strange reason my computer does not detect my zen vision m player as being connected to the computer. the docked screen appears on my player but the arrows keep spinning and my pc keeps saying found new hardware mtp device and does nothing but repeat that over and over again. I run windows xp pro service pack 2 with windows media player installed. I really need help asap to resolve this issue and have my pc reconize it normal again where i can access my music folders and playlists again.

The core problem is related to Microsoft Windows Media . To resolve the issue, you need to uninstall MWM v from the Add/Remove Programs. Then it will rollback to MWM v9. Unplug the player from the USB port. Reinstall the supplied software from Creative if you need too. Reboot, plug the device into the USB port. Reinstall the device driver for the MP3 player. Reload the latest firmware. The file can be downloaded at
http://support.creative.com/downloads/download.aspx?nDownloadId=03

Creative ZEN Vision:M 30gb, Can't dock it....tried everything....Help

Hello , Is there someone out there who knows alot about docking this Zen Vision:M 30GB. I have tried everything by Creative support. I've been working on it for over a month now. The player works fine but when I plug it in to my PC. Nothing happens. I have all updates and I have Windows XP pro. It seems like a driver issue. My Little Zen V has no problem docking, It docks fast , 2seconds everthing opens up nicely. ??????thanks for taking the time to read and write....Message Edited by Wasssupdutch on 03-26-200702:53 PM

Have you solved the problem? If so how? My VM has docked perfectly until I upgraded from USB to USB2. Every other USB device works fine but PC no longer sees the VM. The new hardware wizard pops up and demands a driver and isn't satified by the installation CD. I have uninstalled and reinstalled with no success. Anybody any clues?Thanks.

Zen Vision:M 30GB recognition problems...Big t

Hi, 2 days ago i ran into a problem with my Zen. I had to charge it, as the battery was low and had to put some new music on it.. I plugged it into the USB port on my Laptop, where all of it's software is installed. The Zen wasn't recognized. Instead of the charging screen it normally started up with, it started up with the play screen(the screen it shows when a song is playing). I looked at the battery icon in the top right corner, and it wasn't doing anything. I turned the Zen off and started it up again. Nothing changed. I restarted my computer. Nothing changed. I shut down my computer and started it back up again. Nothing changed.
I took it to my desktop computer, a Compaq, and tried it there. It worked, but not how i was expecting it to work. The battery icon started flashing with the little lightning bolt, acknowledging that it was charging. But the play screen was still there. The odd thing with this is, i left the player to charge for several hours. When i came back, the Zen was in some form of idle shut-down. The screen was black, except for the battery icon with the lightning bolt. Oddly enough, he battery bar hadn't filled up anymore than when i left it. Upon unplugging the player though, the Zen turned off. When i turned it back on, the bar had filled up more. It wasn't fully charged though.
I plugged the cable back into it, and this time, the battery icon WASN'T charging. It just had the play screen on. It wasn't doing ANYTHING this time. Frustrated, i went out and bought the wall charger, and now i have a full battery. But it doesn't solve why my computer won't recognize my player.
Today, i un-installed the software that came with the player and re-installed it. It didn't do anything. I installed the software on my desktop computer, and THAT didn't work either. So i came to the website here and used the trouble-shoot guide. That didn't help, and this is where my problem differs from the other posters here who have recognition problems:
Back to my laptop: I have Windows Service Pack 2. I installed Windows Media Player . I went to the Device Manger, like the trouble-shoot guide said to. The kicker: Windows Portable Devices is NOT, i repeat NOT in my Device Manager. Neither does the Creative player either. I clicked on "The player does not appear in Device manager". That link showed me a diagram of a desktop computer, so went back to my desktop computer. I did everything above mentioned, and Windows Portable Devices is not in the device manager of my desktop computer either. Further reading the trouble-shoot guide, i could NOT locate "Other Devices" or "Unknown Devices" in my Device Manger on either desktop or laptop. There's nothing "Creative" related or "Zen" related at all in any of the Device programs.
I don't know what to do. All of the trouble-shoot guides don't discuss my issue at all. Everything is "If an MP3 player is reported working properly in Device Manager, but it is not detected or listed in Windows Media Player or Creative Media Explorer..."
Mine isn't even detected in Device Manager. My Device Manager has nothing regarding my Zen or Windows Portable Devices.
I'm thinking about messing with it in Recovery mode, but i don't want to erase everything i have on here, just to have my player still not work. I'm going to try messing with this at my friend's house to check the cable and the player there too.
But any help regarding my situation would be greatly appreciated. This is driving me crazy.

I tried my uncle's Zen Vision: M 30GB on my laptop and strange things happened. My laptop recognized the player as an unknown device and said i needed to install the MTP driver. I did that, and upon doing so, my laptop recognized my Uncle's player as a Portable device, allowing me to transfer songs to his player. But it STILL doesn't recognize MY player. Email support says i have to send it in for repairs, but i don't know...
Any luck with you?

Zen Vision M 30Gb Battery Prob

My zen vision m 30gb player can not hold battery charge. The battery when charged fully will drain out without usage. When charged fully and in use, the charge will last for only 2 to 5 minutes instead of the 5 to 0 hours it use to last. Can any one help me with this problem please? The firmware I am using is v .62.02_0.0.23 and my operating system is windows XP professional with service patch 3. I have done clean-up and reboot, the only thing I have not done is reformatting the player.

branbran,
Based on your description, it would be advisable to get in touch with support. Check the "Support" folder on your installation CD for Customer Support contact details.

Creative zen : vision M 30gb strange problem

,Creative zen : vision M 30gb strange problem. Hi people,
My mp3 player is 2 and a half years old. A few months ago he didn't charge anymore. ?I thought i could repair it by buying a new battery and install him in my mp3.
Afther a few ours of ?assembling it was ready for charging a thought..
I used the usb charger and de sync adapter...
the morning after, my mp3 is not charged and only showing me a little red stripe in de battery (right top) i can listen music but only for a few minutes...
Also my PC does noet see my MP3
tested on :
windows xp service pack 3?
vista?
windows 7?
please help me
Stijn van Vilsteren?
DUTCH?
i am sorry for my pore english !

Squipy wrote:
Hi, I stopped using this MP3 for about 2 or so years because I bought a new one. I decided to start using it again and downloaded all the required software but as soon as I unplugged the MP3 from the power outlet, the player died. I can't get it to start up without plugging it into a power outlet. I think it has rechargable battery? Why didn't it recharge itself?
My second enquiry is about the capacity of the player. When my player was empty, I went into "Information" and it said Total Space: 28GB and Free Space: 2GB. Why is free space only 2GB? Shouldn't it be 28 as well?
Thanks in advance!
The battery will only last about 3yrs regardless of use.You will need to change it. Did you scroll down to see the album,picture,track counts? Did you partition part of the dri've for removable storage. You can find instructions to open here ? http://www.youtube.com/watch?v=_Drkr...e=channel_page & ? the battery here(very easy to do) http://cgi.ebay.com/Original-Creative-ZEN-Vision-M-30gb-Battery-LPCS285385_W0QQitemZ400028645679QQcmdZViewItemQQpt ZOther_MP3_Player_Accessories?hash=item40002864567 9&_trksid=p39.c0.m4&_trkparms=72%3A205|66%3A4|65%3 A2|39%3A|240%3A38|30%3A0|293%3A|294%3A200

Creative Zen Vision M (30gb) - Is it the end?

Hi all,
I've read a lot of posts and think the only way to find a possible solution to my problem is to just post it....
I've had my Creative Zen Vision M (30gb) for about?2.5 years, apart from crashing a few times, I've always loved it and would never go near Ipod!
Lately however it's done something, that it has done before which is to suddenly 'remove' about 2000 tracks, it would go funny, crash and reset a few times, recharge with the plug and it was fine again, the tracks 'reappeared'.
Now it seems when it happened this recent time, 3000 tracks went and I was left with about 000. So i tried formatting everything cause it just wouldn't rectify itself, then I chose to reload the firmware but everytime I tried to connect it to my laptop it would say my player wasn't connected.
I have recently baught a new laptop with Windows 7 and even without the software it detects it fine and I think I could just drag music over to it now. BUT - It only has 50mb of memory! Plsu MP3 Recovery Tool and online detection firmware thingy justy doesn't think my player is connected or says cannot update firmware on windows 7?
So my questions?are - how do i fix it's Is my memory fried, would it be worth getting out the old laptop? Where do i go if i want to repair it's Even if it detects it in XP, the software doesn't detect the player.
Can anyone shine any light here? Am I forced to buy another Creative product or do I jump ship?

If the XP computer has WMP installed it may not detect the player (the firmware file) It works best on XP /SP2 WMP0 installed. The issue with WMP is a sticky in the MP3 players forum.

Zen Vision M 30GB Problems

Zen Vision M 30GB Problems? I have a used Zen Vision M 30 GB. I have?a few questions, along with some problems.
My player has to "rebuild" at least twice a day, is that normal?
When a song is playing, is the song name, length of song, etc supposed to be displayed?
Now the major problem:
I can not get either my laptop or desktop to recognize my player.
On the desktop (Windows XP?SP3)?it seems to constantly refresh the Device Manager as an MTP device. while it continues to do this I can see the device is giving me a Code 0.
On the laptop (Windows Vista) it searches for a driver, but the search fails. It does not continuously refresh, but still gives me the same "Code 0 This device can not start" message.
On both computers it says "Docked" on the player when plugged in and also charges.
The player plays well once it makes it through the "Rebuilding" stage.
I thought about formatting it, but?I was not sure that would do any good with this problem. Plus there was a lot of music left on the player from the previous owner that I rather like.
Any help would be greatly appreciated,? Thanks

smittyknox wrote:
I have a used Zen Vision M 30 GB. I have?a few questions, along with some problems.
My player has to "rebuild" at least twice a day, is that normal?
When a song is playing, is the song name, length of song, etc supposed to be displayed?
Now the major problem:
I can not get either my laptop or desktop to recognize my player.
On the desktop (Windows XP?SP3)?it seems to constantly refresh the Device Manager as an MTP device. while it continues to do this I can see the device is giving me a Code 0.
On the laptop (Windows Vista) it searches for a driver, but the search fails. It does not continuously refresh, but still gives me the same "Code 0 This device can not start" message.
On both computers it says "Docked" on the player when plugged in and also charges.
The player plays well once it makes it through the "Rebuilding" stage.
I thought about formatting it, but?I was not sure that would do any good with this problem. Plus there was a lot of music left on the player from the previous owner that I rather like.
Any help would be greatly appreciated,? Thanks
No rebuilding that often if not normal. You seem to be having symptoms of hardri've issues. Now have you done a cleanup>reboot on the player?CHARGE PLAYER BEFORE DOING THIS? http://forums.creative.com/creativel...ap&thread.id=3? That may help with the constant need to rebuild(kinda like defragging the dri've) Use a REAR usb port when connecting to the computer & try using a different usb cable. DO NOT CHOOSE RELOAD FIRMWARE ON THE RECOVERY MENU

Zen Vision:M 30Gb not connected (!) and I'm becoming crazy

:Zen Vision:M 30Gb not connected (!) and I'm becoming crazyl Hi,
I tried for week to do something with the Vision 30Gigs of my son, and I don't no what to do now, maybe open the window and throw the zen..
No, seriously, he still remains in not connected and in Control Panel, system, device manager, always with the yellow sign blinking and tells that no driver is loaded.
I'm in XP SP3, removed WinMediaPlayer to install the WMP 9 because the 0 is not compatible with SP3 I think,
The zen is automatically in Recovery mode when boot, because I have tried all the possible and I have erased the firmware by "reload firmware" but without being connected to the computer,
I tried the recovery tool, but not connected...
So, I'm sure that some guru has the solution, and I'm convinced that this zen is not dead!
Thanks in advance for your precious help.
Ray

Read everything before you start.
Rayray wrote:
Hi,
I tried for week to do something with the Vision 30Gigs of my son, and I don't no what to do now, maybe open the window and throw the zen..
No, seriously, he still remains in not connected and in Control Panel, system, device manager, always with the yellow sign blinking and tells that no driver is loaded.
I'm in XP SP3, removed WinMediaPlayer to install the WMP 9 because the 0 is not compatible with SP3 I think,
The zen is automatically in Recovery mode when boot, because I have tried all the possible and I have erased the firmware by "reload firmware" but without being connected to the computer,
I tried the recovery tool, but not connected...
So, I'm sure that some guru has the solution, and I'm convinced that this zen is not dead!
Thanks in advance for your precious help.
Ray
You're right the Zen is not dead. It needs a firmware to work & it doesn't need to be connected to the computer to erase it. It does however need to be connected to a computer to reload it. First you will need to install WMP0. http://www.filehippo.com/download_wi...edia_player/9/
You then need to charge the battery When its charged & turned back on you will choose Format>Cleanup. You then connect player to see that Windows can see the device. Once you can see that it is recognized in Device Manager you will Disconnect it from the computer (use rear usb ports)
You will need to download the firmware file for the player to the desktop & open the file.(do this before you connect the player again)http://support.creative.com/Products...me=MP3+PlayersOn the player before you connect it to the computer that has the firmware file open & ready to go you will choose Reload firmware connect the player to the computer(use rear usb port) choose your language & let it run. (the autoplay window may open DO NOT CLOSE IT)
The reason it did not work before with WMP9 is that the driver is a part of WMP0.

Zen Vision M 30gb firmware issue (&quot

Hi im just hoping someone could help me, my zen vision m 30gb?froze and i had to format it to get it to work again but, then i got firmware problems after this. so i tried to install a new firmwarei downloaded .6 firmware and clicked the remove firmware button?and tried to install but it still won't install no matter what i try. Anyone have any ideas to help??PS the player made weird clcking noises before i could format it. Thanks :smileyindifferent:?

Haha yeah but, the problem is I didn't drop it!:smileyindifferent:?im goin to see can I send it back for repairs or get a new , suppose thats all i can do....?thanks

Zen Vision M 30Gb Plz Help Me Out I Dont Know What To

Similar Messages

Maybe you are looking for