Zen Vision M:60 with USB host and Panasonic Camcorder SDR-

I own a Panasonic Camcorder SDR-S0 which stores its data on a SD card. I'm thinking about buying the Zen Vision M:60 to use it as a sort of "imagetank" for importing the videos when on vacation. Normally the data on the SD card are transferred by connecting the camera to the PC & transferring them with the Panasonic software MotionSD studio .2E. Another possibility is using Pictbridge. The resulting format of the recorded data is mpeg2.When on vacation I don't have my PC with me & I would like to transfer the data on the Vision M:60. I read that for importing photos this should not give any problems, but no trace of user experience of importing video, without passing thru a PC. I did following test to check which sort of data are on the SD card before transmission to the PC, by reading the SD card with a USB cardreader?: it contained data with .MODextenstion (which is apparently a MPEG-2 codec), .MOI?extension files (which I think is not?needed) & a .PGI file?(which I think is needed?for?graphics printers ?). I copied one?MOV00B.MOD file to my PC and tried to play it. I succeeded without any problem to play it on Windows Media Player. My question : does anyone has any experience with the transfer of this sort of data to the Zen Vision M:60 using the USB host connected either to the digital camcorder or to a cardreader and then importing the .MOD files. If so, could the data be played back on the Vision M:60 ?Thanks for your help ?[color="#ff0000"]As I want to buy the Zen Vision M:60 (bargain price :smileytongue I hope someone with experience on this matter will respond urgently as I leave on holiday next week !!! [color="#ff0000"]Please help !!Message Edited by DEEJEE on 08-03-200705:28 AM

According to the list of tested products here:?http://www.creative.com/products/pro...24&product=433?it's been tested on both Nikon Coolpix P3?and Nikon D200. So?I'd make the assumption that it probably does. It works with my Fuji S5600, and the list above shows they?only tested ?E900 and A600.

Similar Messages

Zen Vision M errors with USB Recognit

Alright I had my Zen Vision now for over and a half years and I've loved it and it always worked perfectly beside some headphone issues. But today I go to plug my Zen into my computer and it doesn't start charging it nor does my computer recognize that something has been plugged into my USB port. The charging is not an issue for me because my Zen came with the DC power wall charger but I can't get any music onto my player. The funny thing is though that when the player is turned off and I connect it to the computer it turns on as if it was going to start charging and syncing but it just never gets to it.
I tried all USB ports in the back and it the front and its not a power issue because its fully charged due to the wall charger. It works great and I tried reseting it to the point where is rebuilt itself and I'm in the process of draining the battery then recharging it to see if that helps but I doubt it since the reseting didn't help. I can't add firmware and I refuse to format it if I even can do it from just the player which I dont know if I can because I have too much music on there.
Could it be an issue with the adapter that switches from DC charger to A/V output and USB? I don't know if its an issue with the adapter because the DC charger works so I don't know. I bought the extended warranty so thats not an issue but is the adapter covered in the warranty? Any help would be great and I'm a dedicated Creative fan thinking about getting the Stone Plus or another smaller player so I hope I can fix this issue here.
Thanks.

would you like to try this? works for melink

Zen Vision:M 30Gb not connected (!) and I'm becoming crazy

:Zen Vision:M 30Gb not connected (!) and I'm becoming crazyl Hi,
I tried for week to do something with the Vision 30Gigs of my son, and I don't no what to do now, maybe open the window and throw the zen..
No, seriously, he still remains in not connected and in Control Panel, system, device manager, always with the yellow sign blinking and tells that no driver is loaded.
I'm in XP SP3, removed WinMediaPlayer to install the WMP 9 because the 0 is not compatible with SP3 I think,
The zen is automatically in Recovery mode when boot, because I have tried all the possible and I have erased the firmware by "reload firmware" but without being connected to the computer,
I tried the recovery tool, but not connected...
So, I'm sure that some guru has the solution, and I'm convinced that this zen is not dead!
Thanks in advance for your precious help.
Ray

Read everything before you start.
Rayray wrote:
Hi,
I tried for week to do something with the Vision 30Gigs of my son, and I don't no what to do now, maybe open the window and throw the zen..
No, seriously, he still remains in not connected and in Control Panel, system, device manager, always with the yellow sign blinking and tells that no driver is loaded.
I'm in XP SP3, removed WinMediaPlayer to install the WMP 9 because the 0 is not compatible with SP3 I think,
The zen is automatically in Recovery mode when boot, because I have tried all the possible and I have erased the firmware by "reload firmware" but without being connected to the computer,
I tried the recovery tool, but not connected...
So, I'm sure that some guru has the solution, and I'm convinced that this zen is not dead!
Thanks in advance for your precious help.
Ray
You're right the Zen is not dead. It needs a firmware to work & it doesn't need to be connected to the computer to erase it. It does however need to be connected to a computer to reload it. First you will need to install WMP0. http://www.filehippo.com/download_wi...edia_player/9/
You then need to charge the battery When its charged & turned back on you will choose Format>Cleanup. You then connect player to see that Windows can see the device. Once you can see that it is recognized in Device Manager you will Disconnect it from the computer (use rear usb ports)
You will need to download the firmware file for the player to the desktop & open the file.(do this before you connect the player again)http://support.creative.com/Products...me=MP3+PlayersOn the player before you connect it to the computer that has the firmware file open & ready to go you will choose Reload firmware connect the player to the computer(use rear usb port) choose your language & let it run. (the autoplay window may open DO NOT CLOSE IT)
The reason it did not work before with WMP9 is that the driver is a part of WMP0.

I'm having lots of trouble finding semi-decent equipment at an affordable price. I would like to start a podcast with two hosts and I have a macbook pro that i purchased in april 2011. any suggestions?

I'm having lots of trouble finding semi-decent equipment at an affordable price. I would like to start a podcast with two hosts and I have a macbook pro that i purchased in april 2011. any suggestions?

I should keep it simple - if you start getting involved with mixers and multiple microphones you will find the cost escalating alarmingly. If you can get yourself a decent microphone and spend some time doing tests to find the best way of balancing the voices you should be able to get acceptable results. You can't plug an ordinary microphone directly into a Mac - you would need a mixer or a preamplifier - so it's probably worth looking at USB mics. I don't know what cost range is available, and you would have to check that they would work with your Mac. Otherwise you will need an ordinary moving-coil mic and probably a USB audio converter which can accept a microphone - look at the Roland site.

My iphone4 is stuck in restore mode with usb plug and the itunes symbol on the screen.

My iphone4 is stuck in restore mode with usb plug and the itunes symbol on the screen after update os7 to os7.04
My phone is completely disabled, what can i do ?

Connect to iTunes. The phone is in Recovery mode. Follow the directions in this support document. http://support.apple.com/kb/HT1808

Help with the HOST and START, forms 6i

Hi i like open to image with de Host and Start in Forms 6i.
For example Host('start '||:path||'', NO_SCREEN ); -> is correct if the path is c:\ ... but if the path is more longer with space in white for example C:\Documents and settings ... i put the quotes "C:\Documents and settings ..." but Doesn't open the image, another window (MSDOS) open... :S

Hello,
Try this:
Host('cmd /c START "" "' || :path || '" ');Francois

I just updated my phone and it is now stuck with usb cable and itunes logo and itunes on my computer says I have to restore. Can I get my phone working again without loosing my photos?

I just updated my phone and it is now stuck with usb cable and itunes logo and itunes on my computer says I have to restore. Can I get my phone working again without loosing my photos?

There is no other way than to plug into a computer to restore the phone. You can use another computer to do so, but in case you did not back up to iCloud your data and settings will be gone.
Follow this article to connect in recovery mode:
iOS: Unable to update or restore

How do you record video with usb mic and have the audio from garageband be the sound when recording and not just your normal voice but garage band effects for youtube?

How do you record video with usb mic and have the audio form garageband be apart of the video when recording, meaning the audio from garageband and echo and not just your normal voice for youtube post?its not add the garageband audio its just normal voice from mic no effects is going thru?

Hi Life93,
What you describe would be possible by recording your video, then removing the audio from it and adding audio from GarageBand once the video is in iMovie (I presume here that you are using iMovie for your video production. Other applications may need different methods.)
See this thread on how to remove the audio from a clip in iMovie -
Is there a way to separate audio from a video c...
https://discussions.apple.com/thread/1779767
To add audio from GarageBand use this article -
iMovie '11: Add a sound clip to your project
http://support.apple.com/kb/PH2255
Thanks for using Apple Support Communities.
Best,
Brett L

Replaced Zen Vision:M 30gb with same ~ Is it necessary to uninstall/remove original progra

So my Zen Vision:M 30 GB crashed and died a horrible death recently. I made the HUGE mistake of not holding onto my original receipt (duh) so even though it falls under warranty, I can't prove it. OK, that's my bad. I loved my Zen while it was working well so I decided to get another one. I really wanted the 60 GB but Creative Customer Support told me in no uncertain terms that the slimmer version would not be released in the US soon or, possibly, ever. (What's up with that ) So I just want to go back to my happy place with my music. I'm ready to get all set up with my new player. BUT ~ do I need to remove all programs related to Creative and reinstall with the new CD provided with my new Zen It would make sense to do so, I suppose. Start from scratch. But I see four programs listed as Creative in my computer. They are:Creative MediaSourceCreative Removable Disk ManagerCreative System InformationCreative Zen Vision M Will I create a problem by removing all four Is there another program I'm not thinking of that should be removed I rolled back to WMP 0 because I read of so many problems with updating firmware and WMP . Now I read there's a fix in WMP and it's OK to reinstall. Anybody want to speak to that Should I dowload firmware right away So many questions... I just really want to get it right this time and enjoy my Zen life once again. Thanks!AFH

If I would have to venture a guess I would assume that there is an IRQ/Interrupt problem going on with your USB controller on your system.
This can can happen due to the system sharing the IRQ that the USB ports are on with other devices, or sometimes be the result of having an older USB driver or an older driver on a device that shares the IRQ with the USB ports.
Going to a slower hub is most likely slowing down the IRQ request rate (due to slower data rate) which keeps the system from becomming unstable. You might want to check out this thread here for some hints on things to try.
The gentleman in that thread was getting "blue screens" and reboots but its most likely the same basic type of problem.http://forums.creative.com/creativel...uery.id=490850

Zen Vision : M - Album Art not displaying and other probl

Hi,
I bought a Zen Vision : M from Hong Kong last week and of course the first thing I did when I got home was install all the software that came with it and started uploading songs.
The player is great and I love it but there are just two annoying little things.
Two problems I encountered.
. I uploaded the album art using the Media Explorer by clicking and draging the JPEG into the explorer as instructed, sometimes the album art shows on the player and for some albums, it just won't show on the player, however it shows correctly on the explorer. Has anybody else experienced the same thing?
Is there going to be a new firmware to fix that?
2. Sometimes after closing all the Creative applications and explorers, it still does not release the player. It still saids that it is docked. I have to either shut down the computer or manually pull the USB cable out which is something I don't want to do if it is still transferring information between the player and the PC... In the next firmware, there should be an option to undock the player.
Also the website claims to have all these accesories such as the docking station and leather case for the player but I cannot find any online store that has it!?! I have searched the Europe online stores and Asia online shops yet I cannot find it. Where would I be able to find it's As I am always afraid that the connector that comes with the player will break as it feels quite fragile.

The undocking issue are you sure the arrows are still moving. I made that mistake when I first got the vision M. I thought it was still updating.
The arrows stay still when you can remove the Vision M and kinda rotate, actually move when you are tranferring songs.
Looks similar.
As for the album art ill try that today and get back to you.

Does the Zen Vision M come with the A/C power adapter in the

I'm getting a Zen Vision M, and was lead to understand it comes with an A/C adapter for recharging. Looking in Creative's shop and on amazon.co.uk , this is the list of package contents:
ZEN Vision:M?
Earphones
Sync Adapter
USB Mini-B Cable
Pouch
Installation CD
User?s Manual</LI>
Does this mean it does NOT come with an A/C adapter? I really hope by 'sync adapter' they mean the A/C adapter as well?

I bought mine from Amazon when they first came out, package included the AC, USB cable and the dongle.
I've also recently bought the cradle which came with an USB cable.
The first version (mine) came with a small dongle to attach to the bottom of the ZV:M which had slots for AC, USB and AV - the cradle is the same thing but enables the ZV:M to be sat upright on its own.
I'm guessing that Creative are going down the iPlod route and providing the capacity to charge whilst docked, but external power as an extra cost.
http://uk.europe.creative.com/shop/p...asp?product=24 shows the cradle
http://uk.europe.creative.com/shop/p...asp?product=23 shows the dongle
The cradle description suggests that the AC is included, but it's not totally clear - I certainly didn't get an extra AC when I bought the cradle in April.
Best thing to do is to give them a call (0800 376 7954 so free in the UK) and ask if a plug is in either of the above packages.
Chris

My Zen Vision M battery problems. not normal and i cant find ans

My Zen Vision M will have a full battery or almost full ( used slightly in the mornings usually) and i turn it off then later in the afternoon it will be dead. why? some one plz help me !!
i usually use it on the bus. in the morning and i want to use it in the afternoon, but it wont even turn on. would it help if i bought a new battery , or a wall charger? thx ~ xavi
oh , and when i turn it back on in just like an hour , it usually will turn on again. but it will drain faster.

HI.. Thanks for you answer and sorry for the caps!!?The player do not charge in usb or ac adapter mode..When i try to turn on the palyer with a ac charger plug in, i see a minimal flashing blue ligth on the power botton but the palyer never turn on... In?usb mode..nothing....2 days plug in my computer and nothing...My player have warranty yet, but im outside of United States, im in Venezuela and i want to know if here exist a creative office because i need repair my player..i do not understandig why this player "dead" too soon... Im waiting for help or an answer to solve my trouble with my player!!?Thank you again!?Antonio

Creative Zen Micro 6GB/Problems with Power Switch and Firmw

The power switch on my Zen Micro has died. I can't turn it on or off unless I 'jump start' it from a USB cable and leave it alone to go into idle shutdown. I've had this player just three weeks and this is happened and frankly I'm disgusted. But wait, my story get's worse:
So before sending it back to Creative I thought that I should at least exhaust every possible cure. First on my list? A Firmware upgrade to v2.22.05. I downloaded the program and set about installing the new firmware but halfway through the process it hung and I had to end it prematurely. Now what I had was a ZM that apparently had v2.22.05 but was not being recognised at all by my computer. Media Explorer wasn't picking up on it and neither was WMP although strangely when I connect the device it's there in the Device Manager...
So, check back with the website and it said to download an update for Mediasource and that should solve the problem. Downloaded the patch but then realised that I hadn't installed Mediasource on my computer (can't remember why I didn't though). Went back to the downloads page and downloaded Mediasource. Tried to install it but I can't. The reason? because my computer isn't detecting the ZM and I can't install it until it recognises that it's there.
As a last resort I thought that I would try to use 'Rescue Mode'. Seemed simple enough, remove the battery and hold down the power switch. Then put the battery back in and wait for the rescue screen to come up. Seems easy enough. Oh wait, I don't have a working power switch.
What I do have though, is a small piece of plastic and metal that I can't turn on, can't turn off, can't put any songs on, can't listen to, can't fix and can't be bothered with. I have a ?60 paperweight.
Anyone at all have any idea what I should do? I just want to put it all in a box and send it back to Amazon with a request for a full refund or a threat to take them to the Small Claims Court.

Although a failed power switch is not unknown, I only recall seeing two or three other cases of this. It's not common.
If WMP isn't working with the device having v2 firmware something is wrong. Unfortunately this can be difficult to fix, but take a look here in the Zen FAQ at Nomadness.net.
MediaSource won't detect the player if there's some issue e.g. WMP0 not detecting it. You can of course also try installing Zen Micro Media Explorer (Creative Zen Micro Media Explorer Web Update to be specific) which has MTP support.
Are you are presumably under guarantee, and as you bought from an Internet store, it's best to return it direct to Creative. Contact Creative Support to arrange this.

Zen Vision M 30gb Won't charge and not being recognized on any comput

Can you give me some pointers. The charge went completely depleted and no computer recognizes it
when I plug in by usb. Any suggestions?

Hello Dsgrov,
Welcome to Creative forums!
You can get a lot of results if you search "Zen Vision M not charging" on the search box.
Here's one, you might want to check this thread.

Zen Vision:M - help with moving files around once loa

Guys and Gals, i recently bought the Zen Vision:M and need some help. Once i loaded songs or vdos into it i find that i am not able to move these files from one folder to another. I am using the zen vision explorer program that came with it. it allows me to right click then select 'cut' or 'copy' but then when i navigate to where i want to paste it the paste option is greyed out when i right click. anyone have a solution for this? any help would be greatly appreciated.

it sucks... you want a song in one folder like the album into another right? Yeah you have to modify the ID tags to do that.... I took all my songs and changed the album name to ALL for my zvm using snackamp. Look it up it works fine. You can choose the songs you want to a particular album (works for 200 at a time) and choose the album for them all. Thats the only advantage of iPod i'd have to say... the ALL option under songs... so yeah get snackamp, use it, take all the songs off your zen and re-add them and it should be fine.

Zen Vision M:60 with USB host and Panasonic Camcorder SDR-

Similar Messages

Maybe you are looking for