Zen vision M battery replacem

hello all
i need a little help
i have to change the battery in my zen vision m 30gb
what battery model should i use ? ( is 3.7 v li-ion polymer ok ... wheres the best place to get it ) ?
how do i open the case ( mp3 player ) ? do i need a special tool ? is there a risk to break it ?
thank u so very much
[email protected]

I recommend using OEM battery made by Creative. This person sell & repairs? http://cgi.ebay.com/Zen-Vision-M-Battery-GENUINE-Creative-Labs-TESTED-GOOD_W0QQitemZ20027345020QQcmdZViewItemQQptZOther_ MP3_Player_Accessories?hash=item20027345020&_trksi d=p39.c0.m4&_trkparms=72%3A423|66%3A2|65%3A2|39%3A |240%3A38? Instructions for opening & replacing of the battery? http://www.youtube.com/watch?v=akJDRpx6rA8

Similar Messages

  • Zen Vision: M Screen replacem

    Just a FYI.
    If your screen cracks due to ANYTHING whatsoever, it's $22 down the tubes.
    Plus the cost of you shipping the player to them.
    This happened to me, it can happen to you.
    Thank you, who/whatever broke my screen (my guess is that I sat down, and the player in my left front pocket bumped into the armrest). That's the last time I put a pocket sized appliance in my pocket without special protection.
    This would have been avoided if there was a hard plastic case for the thing.

    I recommend using OEM battery made by Creative. This person sell & repairs? http://cgi.ebay.com/Zen-Vision-M-Battery-GENUINE-Creative-Labs-TESTED-GOOD_W0QQitemZ20027345020QQcmdZViewItemQQptZOther_ MP3_Player_Accessories?hash=item20027345020&_trksi d=p39.c0.m4&_trkparms=72%3A423|66%3A2|65%3A2|39%3A |240%3A38? Instructions for opening & replacing of the battery? http://www.youtube.com/watch?v=akJDRpx6rA8

  • My Zen Vision M battery problems. not normal and i cant find ans

    My Zen Vision M will have a full battery or almost full ( used slightly in the mornings usually) and i turn it off then later in the afternoon it will be dead. why? some one plz help me !!
    i usually use it on the bus. in the morning and i want to use it in the afternoon, but it wont even turn on. would it help if i bought a new battery , or a wall charger? thx ~ xavi
    oh , and when i turn it back on in just like an hour , it usually will turn on again. but it will drain faster.

    HI.. Thanks for you answer and sorry for the caps!!?The player do not charge in usb or ac adapter mode..When i try to turn on the palyer with a ac charger plug in, i see a minimal flashing blue ligth on the power botton but the palyer never turn on... In?usb mode..nothing....2 days plug in my computer and nothing...My player have warranty yet, but im outside of United States, im in Venezuela and i want to know if here exist a creative office because i need repair my player..i do not understandig why this player "dead" too soon... Im waiting for help or an answer to solve my trouble with my player!!?Thank you again!?Antonio

  • Zen vision m battery lif

    ok i was wondering about how many months do the zen vision m batteries last how long do the zen micro photo last ? oh im not talking about usage im mean like in months

    I don't know about months. Are you wondering about the average life span? They say li-ion batteries last up to 2-3 years. For more info go here:
    www.batteryuni'versity.com

  • Zen vision m batter

    hi! is it possible to buy a zen vision m battery from creative and get it posted to me i know i can put one in and my warrenty is no more. In about a year it will die please make this possible creative. thanks

    thanks for the reply. i have found batteries on ebay just in case you have not seen them they price at around ?5.00 including postage and package zen vision m batteries. ok thanks again

  • Zen Vision M 30Gb Battery Prob

    My zen vision m 30gb player can not hold battery charge. The battery when charged fully will drain out without usage. When charged fully and in use, the charge will last for only 2 to 5 minutes instead of the 5 to 0 hours it use to last. Can any one help me with this problem please? The firmware I am using is v .62.02_0.0.23 and my operating system is windows XP professional with service patch 3. I have done clean-up and reboot, the only thing I have not done is reformatting the player.

    branbran,
    Based on your description, it would be advisable to get in touch with support. Check the "Support" folder on your installation CD for Customer Support contact details.

  • Zen Vision M 30gb battery problems

    i just bought the zen vision m and im already having problemswhen i try using the usb port nothing will happen no charging icon apears ( i left it for h and 30m no results)?so then i got awall adapter and it turned on!!! great!!!but when i disconnect the charger it automatically turns off and i dont think i see a charging icon but i do see the icon with the plug so i think it says it full charged but its not.......is it because i have to let it charge longer or what... plz help

    i dont know how it happened and i dont care how it happend lol but its charging now!!! wooooot the chraging symbol has shown up yeah!!!!! now..just gotta wiat 5 hrs for it to fully charge... o and i have to go buy a psp chargercasue the one i used was borrowed hahahaha....(psp charger works with the zen compare prices ppl mabe save a couple of bucks)

  • There's video problems with my Zen Vision:M already (M video cable related) Please help

    Some background...
    System:Windows XP with Service Pack 2.
    Player: Brand new Creative Zen Vision: M with no firmware updates.
    My Zen Vision:M has a problem (besides the scratch and fingerprint attracting top surface): It won't play videos on a TV screen when the M Video Cable (also from Creative) is linked to it anymore. It's only been a few hours...
    I had the cable already, and got the player today. I let the player charge to /4th of a battery while I was setting up all the software. I ran the software programs just to take a peek, only changing the name of my player (to my name). I used Winamp 5.3 to put a music track on the player to test it. After that, I hooked it up to the VCR in my room through the white and yellow A/V plugs in front. It worked just fine. It to the tv a little large, but I was okay with it.
    Later on today, the new AC charger I ordered came in the mail (Player came through UPS, charger through USPS). I looked at my old charger (Creative Zen Touch) and realized it would work with the plug-in part of the sync unit at the bottom. I tested it for a minute and it did. I still took it out and tried the new one. This is where, I think, something happened. I had to press the sides to get the thing in, and it was hard to come out. Everything still fit just right, and nothing seemed to be wrong. I used my old charger as I added more of my music library. Now it was on to videos. I had to convert the first two test vids (they were .wmv), but they played on my player fine. I put a bigger .wmv file onto the player to see if it had to convert it, and it did. It still played on the player. When I go to hook it to the TV with the A/V cord again, there was nothing but a black screen with the occasional diagonal scan line. The sound is still there.
    Besides quirks with the navigational system, the player is still great for music and video. Still, I needed no video capability, and one of the things that made the ZVM a buy for me was watching my vids on the big screen. I'd return this for a second try, but I want to know if this is a recurring issue with you guys and if there's something I can do to fix it before a return. Did I mess with a setting? Should I get new firmware? Did I do wrong using my old charger? If any of you have an answer, or need more info on my situation, please let me know.
    And BTW, does anyone know of some better software for organizing files on the ZVM? I used Winamp for my Zen Touch and the music on my ZVM, but videos are another ballpark. I can't transfer a video from one folder to another folder (assuming both folders are on the ZVM). Not to mention the music I transferred using Winamp isn't even showing up in Windows Media Player. I think I need a different program altogether.

    I have got a new Creative Zen Vision W and getting the same problem....when i attach to the tv then i am able to hear the audio content and the video does not show.Are we missing something ? or is it a problem with the player. Also the software provided with the Zen converts small .vob files to .wmv when ever the size is large it gives an error 'conversion?unsucessful'.Any body facing similar problems please help.

  • Zen Vision M Hanging Is

    I have a new Zen Vision M I picked up in Singapore last week (June , 2006). It seems to hang quite a bit. When this happens it will repeat the last perhaps 6th second of audio over and over....kind of a long stutter and not respond to any buttons. I have had to reset the device using the hole at the bottom. I had to do this several times on the Singapore -> Melbourne flight (6+ hours). In the last week I have had to reset several more times. Once when powering it up it hung. It seems I have to keep a pin taped to the device to regularly reset it. Looking around on this site I see references to this problem happening with Firmware version .2x, but this device came with .30.02 on it when I purchased it. Just in case I tried downloading .30.02 and installing it anyway, but all I get is a message that says: Your player is not connected, please connect your player.
    I would love to see this problem go away and I look forward to any suggestions on how to fix it.

    I had similar problems with a Zen Vision M purchased less than two weeks ago.
    I was running firmware .40.x at the time, so that was not the problem.
    I did the Rescue Mode Clean up of the dri've. But the problem recurred. So that was not the problem.
    Thinking it might be some form of electronics or hard dri've problem, I just let the player play music continuously trying to exacerbate the problem and get it to reproduce the problem.
    After a week of owning it, the player became so wedged that not even a reset would resolve the problem. Literally the unit would not reboot and I had to let the battery completely run out as there was no way to do a hard power reset (i.e. pull the battery).
    Last night I returned it to BestBuy and exchanged it for a new unit. So far no problems withn the past 20 hours. (The first unit had some UI sluggishness and non responsi'veness the first day out). While the unit booted fine at the BestBuy exchange department, by the time I was signing the paperwork for the exchange, the technician on duty said the player had hung itself.
    I'm letting the player play music continously to see if player was a bum player or of player 2 is part of a manufacturing batch problem.
    I like my wife's Creative Zen Microphoto so am disappointed by the experience with this first ZVM and the fact that I only got an automated reply from Creative Customer support and no other responses after 0 days.

  • Zen Vision:M unusual freez

    I know there are like 0 of these a day, but I can't find any threads with my problem. Today I had to reset my ZEN Vision:M more than 0 times. It would crash halfway through a song, while scrolling through menus, when being nudged LIGHTLY or on the LOW BATTERY or startup screens, once even the second after it rebuilt itself. I've not had this problem before today. I did drop it a couple of days ago from like a 2ft hight, but it has a rubber cover on it that hopefully absorbed most of the blow. It has frozen in the past when dropped, but vary rarely does this happen. I got it for christmas so it should still be in warrenty. However, at the join along the side of the player the two sections are coming apart VERY slightly, like a milimetre, and this was not to do with droppings. tiny parts of the paint on the back have been clipped off and there is a small scratch on one button. Is this enough to void the warenty? I really hope not, but this could be seen as misuse. maybe. Can anyone help with this problem? I'd be very appreciati've.

    Try to not switch songs too quick you know what i mean. Gi've your player like 2 seconds to reposnd and then press stuff. I noticed the player kind of lags and it had crahsed on me a few times when i was listening to a song and scrolling through a bunch of photos.

  • Zen Vision: M Voice recorder feature for school quest

    Hello guys. I am very close to purchasing a Zen Vision: M 30GB MP3 Player.
    My main concern is with the Voice Recording function since i wish to record
    school lectures.
    Will anyone who owns one of these or has direct information, please discuss this with me?
    ] How clear are the recordings? I'm planning to record 2-3 hour lectures at a time
    2] I've been hearing there is a faint noise due to the hard-disk of the unit, does it present an issue?
    3] How is the battery life, in terms of recording?
    Any additional information you have dealing with recording, will be greatly appreciated.
    Thank you in advance,
    ~Dimitriy

    Go to "Music Library" then select "Artists" and to your desired artist.

  • Zen Vision M: Unable to charge. Nearly to give product back (forev

    Hello,
    I purchased a Zen Vision M two weeks ago. When I arri've at home I installed the software successfully and then connected the Zen Vision M to my USB poert on my laptop (Win XP Pro SP2) to charge it; no sign of life. No display activity and NO LED CHARGE ACTIVITY. I letf the ZVM an entire night to see if things changed, but no success. I've tried the following:
    - Disable power saving on usb port: no sign of life
    - Gave everyone permission on usb port: no sign of life
    - Push reset button and the recharge: no sign of life
    - Tried on a different PC: no sign of life
    So I retuned to the shop and:
    - We checked with a differnt cable and with a desktop on the shop: no sign of life.
    I asked to change the ZVM with another one. Yesterday, after TWO WEEKS of delay (because the shop had to order since it was the last ZVM they had), I had the new ZVM. Result: NO SIGN OF LIFE once again.
    Note that:
    - my USB ports (of both laptop) works perfectly with other devices
    - my usb ports have power: I have a USB PC Lamp, and a USB Optical Mouse and they works perfectly.
    - I let the ZMV connected to the USB port always more than 8 hour. The Laptop power option was set to avoid hybernate or suspend status
    - No application was running during charge
    I tryed to find a phone tech support, but - despite the statement on the creative site - in italy there is no phone support, just via e-mail.
    If the customer support will not able to resolve the problem I'll give my ZVM back (forever) and I will ask my money back.
    My percption of the problem is that the ZVM have battery completed depleted and USB is not able to provide enough power to charge. But the fact that not even the LED id flashing let me with no clue.
    I kindly ask the community if someone had the same problems, and if there are any suggestion that AT LEAST let my charge led flashing.
    Sorry, for the long post, but I'm really upset with the whole situation.
    Thank you in advance.
    Riccardo

    I am new to these forums. So bear with me. I am in the Oz outback.
    In a possible answer to your problem IlRiccardo I purchased two Zen Vision M units this past week with the same problem. I returned the first unit and got my money back. I purchased a second unit from a different supplier in a another town. Same problem again The second time I did read the supplied booklets in more detail pouring over every word. I found what the symbols in the top right of the screen was suppose to mean. I did purchase units with the Creative supplied powerpack. I was able power the unit up on the external power pack.
    Q. Do you have a symbol that looks like a plug with two prongs on it's
    Q2. What is the version number of the installed firmware?
    I had that symbol on the top right of the screen. I found through a small Product Information booklet that it was to indicate a fully charged battery and operating on external power. RUBBISH (to the charged battery) as it was a brand new unit. The firmware version installed in both ZENs was .30.xx (cannot remember the last two digits).
    I checked the Creative FAQ pages at my daughter's place (in town where I purchased second unit) and found a page listing most of the same symptons as I was experiencing. The download page was talking about a version .50.xx. The link was for a downloadable version of .6.0.
    Subsequently I did download the update file and installed it. Low and behold my ZEN Vision M now showed the symbol for a charging battery. The unit did charge up and is working on the battery. Firmware Version .6.0
    Check with your supplier/shop where you purchased your ZEN to see if this action will void the warranty? My supplier is suggesting it has!!!!. I hope I don't have to go down the warranty path for any reason.
    Hope this helps you and others.
    I have post an almost similarly worded reply in another thread about "not charging" SO it is a firmware version issue in my view.

  • Zen Vision:M 30GB recognition problems...Big t

    Hi, 2 days ago i ran into a problem with my Zen. I had to charge it, as the battery was low and had to put some new music on it.. I plugged it into the USB port on my Laptop, where all of it's software is installed. The Zen wasn't recognized. Instead of the charging screen it normally started up with, it started up with the play screen(the screen it shows when a song is playing). I looked at the battery icon in the top right corner, and it wasn't doing anything. I turned the Zen off and started it up again. Nothing changed. I restarted my computer. Nothing changed. I shut down my computer and started it back up again. Nothing changed.
    I took it to my desktop computer, a Compaq, and tried it there. It worked, but not how i was expecting it to work. The battery icon started flashing with the little lightning bolt, acknowledging that it was charging. But the play screen was still there. The odd thing with this is, i left the player to charge for several hours. When i came back, the Zen was in some form of idle shut-down. The screen was black, except for the battery icon with the lightning bolt. Oddly enough, he battery bar hadn't filled up anymore than when i left it. Upon unplugging the player though, the Zen turned off. When i turned it back on, the bar had filled up more. It wasn't fully charged though.
    I plugged the cable back into it, and this time, the battery icon WASN'T charging. It just had the play screen on. It wasn't doing ANYTHING this time. Frustrated, i went out and bought the wall charger, and now i have a full battery. But it doesn't solve why my computer won't recognize my player.
    Today, i un-installed the software that came with the player and re-installed it. It didn't do anything. I installed the software on my desktop computer, and THAT didn't work either. So i came to the website here and used the trouble-shoot guide. That didn't help, and this is where my problem differs from the other posters here who have recognition problems:
    Back to my laptop: I have Windows Service Pack 2. I installed Windows Media Player . I went to the Device Manger, like the trouble-shoot guide said to. The kicker: Windows Portable Devices is NOT, i repeat NOT in my Device Manager. Neither does the Creative player either. I clicked on "The player does not appear in Device manager". That link showed me a diagram of a desktop computer, so went back to my desktop computer. I did everything above mentioned, and Windows Portable Devices is not in the device manager of my desktop computer either. Further reading the trouble-shoot guide, i could NOT locate "Other Devices" or "Unknown Devices" in my Device Manger on either desktop or laptop. There's nothing "Creative" related or "Zen" related at all in any of the Device programs.
    I don't know what to do. All of the trouble-shoot guides don't discuss my issue at all. Everything is "If an MP3 player is reported working properly in Device Manager, but it is not detected or listed in Windows Media Player or Creative Media Explorer..."
    Mine isn't even detected in Device Manager. My Device Manager has nothing regarding my Zen or Windows Portable Devices.
    I'm thinking about messing with it in Recovery mode, but i don't want to erase everything i have on here, just to have my player still not work. I'm going to try messing with this at my friend's house to check the cable and the player there too.
    But any help regarding my situation would be greatly appreciated. This is driving me crazy.

    I tried my uncle's Zen Vision: M 30GB on my laptop and strange things happened. My laptop recognized the player as an unknown device and said i needed to install the MTP driver. I did that, and upon doing so, my laptop recognized my Uncle's player as a Portable device, allowing me to transfer songs to his player. But it STILL doesn't recognize MY player. Email support says i have to send it in for repairs, but i don't know...
    Any luck with you?

  • Zen Vision M Recognized by XP Pro, but not by Creative Media Organizer or other transfer softw

    I have a Zen Vision M. It worked perfectly for months. Suddenly, it wouldn't turn on. I started it in Rescue Mode, did a clean up and several reboots. It started doing a rebuild on every start. Now when I plug it into the USB port, my computer recognizes it. It gives me the portable device icon in the task bar. But, if I try to use it with Windows Media Player 0, Creative Mediasource, Organizer or anything else, it says the device is not connected. I have checked Device Manager, and it shows up. I have uninstalled and reinstalled the Zen software. I have no issues with device drivers in the Device Manager. It just simply will not show up as connected on any software to transfer music.
    If I connect it to the USB, it goes into dock mode. When I boot up any of the software, it shows the docking arrows moving. It's like everything is ok except the one important piece - not being recognized by the various software needed to transfer music.
    Please help!? I have a Dell Dimension 8400. I run Windows XP Pro with ALL updates, and SP2. It is completely up to date with all critical updates for XP Pro. This came out of the blue and I have no explanation for it. I hadn't used it for about 3 days, but it worked perfectly up until I turned it on that last time when I got nothing and had to go through all the clean up, reboots, etc. I have done 2 clean ups so far.
    Please advise what to do next.
    Thanks.

    Ok. I checked my version of XP. It is XP Pro, Version 2002, SP2. I checked and already had the 2 hotfixes that were listed as being needed before proceeding. I followed all the steps and changed the registry key on "everyone" as the instructions stated to do. My ZVM is still not recognized by any of the software for transferring or organizing MP3's. My computer still recognizes that it is attached. It still gives me the device icon in the task bar. It still says it's A-ok in the Device Manager. It does everything, except it is not detected by ANY of my music software. <sigh>? Frustration is at its peak for me right now. I really appreciate all of the efforts. I'm at my wits end now. I have done everything you have indicated I should, but am getting the same results. I did purchase an extended warranty from Circuit City where I purchased this last summer. Is that the next step? Do I need to get this replaced?I love this player and really don't want to go through this again. We had to exchange it twice in the first month because it froze up and wouldn't do a thing. This last one has been perfect. I keep it in a leather padded case at all times. It never has the battery drained. It never gets jostled or bumped or dropped or anything that might damage it. When not being played, it stays on my desk in the case.
    Thanks so much for any and all help.

  • Creative Zen Vision 30Gb Stuck in Recovery Mode, Freezes when trying to deal with Firmware

    My Zen Vision is stuck in Recovery Mode. The PC recognizes it but it comes up as 50mb Storage Media. When you touch Reload Firmware or Format All, it freezes and you have to pull the battery out to shut it off. I don't know what to do. Charges fine, never said anything about HARDWARE issues, just can't get it to not freeze when trying to load firmware back onto it.

    I did the same thing, my unit was working perfectly.
    I just read that these players have a laptop 2.5 hard dri've installed in the unit. If this is true, the next chance I get, I will take my unit apart (40 gig nomad zen xtra) and see if I can reinstall the firmware directly. It's probably what they do at the repair sho
    ps.
    Check it out, It may be worth a try!!!

Maybe you are looking for

  • DS Enhancement BW tasks

    Dear Experts I have 10 fields in DS,DSO,Cube.CURRENTLY ITS IN DELTA RU IN PRODUCTION ENVIRONMENTS. Added one extra field ZT in Source system for the DS X and replicated X to the BW side,it works properly.Added the IO ZT to the Cube and DSO. Do I need

  • Match no longer shows whether a track is matched or uploaded?

    The previous iTunes version showed whether a track was uploaded or matched and I can't seem to see whether this is still available? Just using cloud to view my music as the copies are on an external hard drive. Can anyone advise? Many thanks.

  • Iphone 5 factory unlocked

    I got my Iphone 5 from Telus last month. I went non Telus store for factory unlcoked (IMEI) last week. My phone can work to other network and update new version now. After I unlocked my phone, does my phone still have warranty? If my phone has proble

  • Mapping between SAP work process and db2 application/applications ?

    Hi, I want to identify what db2 application(s), maps to particular SAP work process.(when I mean db2 application I mean entry in "list applications" command output) Both db2 "list applications" and SAP work process lists PIDS of processes they belog.

  • How to unistall an app?

    How does one un-install an app that one does not need?