Zen Vision M Recognized by XP Pro, but not by Creative Media Organizer or other transfer softw

I have a Zen Vision M. It worked perfectly for months. Suddenly, it wouldn't turn on. I started it in Rescue Mode, did a clean up and several reboots. It started doing a rebuild on every start. Now when I plug it into the USB port, my computer recognizes it. It gives me the portable device icon in the task bar. But, if I try to use it with Windows Media Player 0, Creative Mediasource, Organizer or anything else, it says the device is not connected. I have checked Device Manager, and it shows up. I have uninstalled and reinstalled the Zen software. I have no issues with device drivers in the Device Manager. It just simply will not show up as connected on any software to transfer music.
If I connect it to the USB, it goes into dock mode. When I boot up any of the software, it shows the docking arrows moving. It's like everything is ok except the one important piece - not being recognized by the various software needed to transfer music.
Please help!? I have a Dell Dimension 8400. I run Windows XP Pro with ALL updates, and SP2. It is completely up to date with all critical updates for XP Pro. This came out of the blue and I have no explanation for it. I hadn't used it for about 3 days, but it worked perfectly up until I turned it on that last time when I got nothing and had to go through all the clean up, reboots, etc. I have done 2 clean ups so far.
Please advise what to do next.
Thanks.

Ok. I checked my version of XP. It is XP Pro, Version 2002, SP2. I checked and already had the 2 hotfixes that were listed as being needed before proceeding. I followed all the steps and changed the registry key on "everyone" as the instructions stated to do. My ZVM is still not recognized by any of the software for transferring or organizing MP3's. My computer still recognizes that it is attached. It still gives me the device icon in the task bar. It still says it's A-ok in the Device Manager. It does everything, except it is not detected by ANY of my music software. <sigh>? Frustration is at its peak for me right now. I really appreciate all of the efforts. I'm at my wits end now. I have done everything you have indicated I should, but am getting the same results. I did purchase an extended warranty from Circuit City where I purchased this last summer. Is that the next step? Do I need to get this replaced?I love this player and really don't want to go through this again. We had to exchange it twice in the first month because it froze up and wouldn't do a thing. This last one has been perfect. I keep it in a leather padded case at all times. It never has the battery drained. It never gets jostled or bumped or dropped or anything that might damage it. When not being played, it stays on my desk in the case.
Thanks so much for any and all help.

Similar Messages

Microphoto works in WMP 11, but not in Creative Media Explo

Hello, I've tried finding info on this and can't seem to find an answer. My microphoto used to work fine on my laptop (my only computer)....but I tried it again yesterday and Media Explorer won't recognize that it is plugged into the computer. The computer recognizes it however, and it works fine in mediasource organizer and in WMP . So I can transfer files using either one of these.... I can also transfer files just by dragging and dropping in windows explorer. So why do I care? Well, Media Explorer is the only way to sync with Outlook and organize my contacts etc. on the microphoto so I really would like it to work. I tried changing the usb permissions in the registry but this didn't help. My specs:Windows XP with SP2 and WMP Microphoto firmware version .3.0 (which I updated successfully yesterday)?Does anyone have any ideas how I can get Media Explorer to recognize my microphoto I REALLY don't want to get rid of WMP if I don't have to (I've spent quite a long time getting all my album art in order). Thanks!?

Thanks - I've already tried to reinstall the software and there is no update in the download section of microphoto for the Media Explorer.

Zen V Plus recognized by device manager, but not by Media Explorer/Windows Media Pla

Hi,
I just got back from Best Buy after buying a Creative Zen V Plus. I installed everything from the CD and plugged in the player, but the Media Explorer doesn't recognize it (even after restarting PC). The Device Manager recognizes it but there's an exclamation mark next to it. The Windows Wizard came up numerous times asking me for permission to connect to the internet and install the driver for me, and after a while I tried doing so but it said it couldn't find anything (I would like to shave that wizard's beard off).
I went through all the stickies in the forum and about 3 different troubleshooting sessions with no luck. I googled it and asked this question on Ask Yahoo!, but no luck yet.
Here's my PC info:
Windows XP SP2
768MB Ram
Pentium 4 2.8Ghz
USB 2.0 (I tried different ports, the player does seem to be charging as there's a little lightning bolt flashing on top of the battery icon)
I'd really appreciate it if someone could help me out.
Thanks!

Ok. I checked my version of XP. It is XP Pro, Version 2002, SP2. I checked and already had the 2 hotfixes that were listed as being needed before proceeding. I followed all the steps and changed the registry key on "everyone" as the instructions stated to do. My ZVM is still not recognized by any of the software for transferring or organizing MP3's. My computer still recognizes that it is attached. It still gives me the device icon in the task bar. It still says it's A-ok in the Device Manager. It does everything, except it is not detected by ANY of my music software. <sigh>? Frustration is at its peak for me right now. I really appreciate all of the efforts. I'm at my wits end now. I have done everything you have indicated I should, but am getting the same results. I did purchase an extended warranty from Circuit City where I purchased this last summer. Is that the next step? Do I need to get this replaced?I love this player and really don't want to go through this again. We had to exchange it twice in the first month because it froze up and wouldn't do a thing. This last one has been perfect. I keep it in a leather padded case at all times. It never has the battery drained. It never gets jostled or bumped or dropped or anything that might damage it. When not being played, it stays on my desk in the case.
Thanks so much for any and all help.

My zen micro is recognized by my computer, but not firmwa

I have tried the whole uninstalling of wmp and all that and it only makes it so that the driver is no longer installed and the player is no longer recognized at all.
What happened was that I had gone in to recovery mode and pressed reset firmware. Then when I had attempted to reinstall it from creatives site, it said that the device was not connected.
Please someone help =[ I already tried was was said in the sticky above about firmware problems.
Thank you
windows xp sp2
Dell inspiron 200
zen micro 6g

aaah it worked =D Thank you so much for helping, I was afraid it would never work again.
1.) Roll back windows media player . reboot. roll back windows media player runtime. reboot.
2.) install windows media player 0.
3.) install firmware update
4.) unplug zen micro from computer
5.) open firmware
6.) select firmware update on zen, click yes and plug in
7.) select language.
aand it worked =D?
thank you so much once again =]
Message Edited by Tazmaniak89 on 0-08-2008 04:58 PM

Having multiple iDevices, messaging is becoming a nuisance. I can disable on iphones and iPad, but but I'd still like texting on macbook pro but not group. How to disable, other than delete app?

Ok, new to this, sorry for long title, thought I was in text/message part. I have two iPhones, and iPad, and a MacBook Pro. Invoking messaging and receiving on two iPhones and an iPad was cute in the beginning but now it's beyond useful. i've solved the problem on iPhones just by turning off messaging, but find nothing in settings to turn off messaging on the MacBook Pro. I'm assuming that turning off messaging on my phones reverts to SMS tho' not sure what Apple uses if not SMS.
I do not want iPhone messages being received on my MacBook Pro. How do I de-authorize, can't seem to find anything in settings and don't want to delete MESSAGE.APP as who knows if I want it in future.
Thanks in advance. All deviced up to date with software, and am using Mt. Lion on MacBook.

HI,
The iOS Messages app send either iMessages or SMS depending on the receiver.
If it is Off then you can't send SMS either.
Turn Messages back On in the iPhone.
Go to Setting > Messages > Send and Receive and delete the Apple ID (And any other email) you listed for iMessages
You will get a warning alert that the ID will be deleted across all devices (and it included Messages on the Mac)
The Messages app on the Mac can have iMessages turned Off.
Two ways to do this.
Simplest is to go to Messages Menu > Preferences > Accounts and Untick the Enable this Account Box.
The second is to use the Sign Out Button (in OS X 10.8.2 which has updated Messages to version 7.0.1)
The Second logs you out and removes the Apple ID from the iMessages Account settings.
9:50 PM Sunday; October 7, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.2)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad
"Limit the Logs to the Bits above Binary Images."  No, Seriously

IPod nano recognized in MY Computer but not in iTunes

My iPod nano is recognized under My Computer but not in iTunes.
I formaatted the iPod nano as FAT32 using the format option when right-clicking on the drive in My Computer.
I installed the latest version of iTunes software. I adopted the five R's approach to resolve my issue. I have wanted to restore the iPod but this option is not available in iTunes, since the iPod is not recognised by the software.
The iPod diagnostics option in iTunes indicates the following:
Microsoft Windows XP Professional Service Pack 2 (Build 2600)
Dell Computer Corp. Latitude L400
iTunes 7.0.2.16
iPodService 7.0.2.16 is currently running.
iTunesHelper 7.0.2.16 is currently running.
Current user is an administrator.
Connected Storage Devices:
IDE\DiskIC25N020ATDA04-0______________________DA3OA70A, Bus Type ATA, Bus Address [0,0]
USBSTOR\DiskApple__iPod___________1.62, Bus Type USB
USBSTOR\DiskWD_____2500BB_External0602, Bus Type USB
Universal Serial Bus Controllers:
NEC PCI to USB Open Host Controller, PCI bus 129, device 0, function 0. Device is working properly.
NEC PCI to USB Open Host Controller, PCI bus 129, device 0, function 1. Device is working properly.
Standard Enhanced PCI to USB Host Controller, PCI bus 129, device 0, function 2. Device is working properly.
Intel(R) 82371AB/EB PCI to USB Universal Host Controller, PCI bus 0, device 7, function 2. Device is working properly.
No IEEE 1394 Host Controller found.
Connected Device Information
ORLAITH'S I (I:\), iPod nano running firmware version 1.1.1
Serial Number:
Bus Speed: 61440
The last connected iPod serial number:
The iPod Service Logging Information:
[SERVICE: 0x834,09:19:26 INFO] Started C:\Program Files\iPod\bin\iPodService.exe (Fri Dec 15 09:19:26 2006)
[SERVICE: 0x834,09:19:26 INFO] ##### iPodService starting as a service, version: 7.0.2.16
[SERVICE: 0x848,09:19:27 INFO] Got signaled to go ahead... Starting device manager!
[SERVICE: 0x87C,09:19:27 INFO] Listener Window created
[SERVICE: 0x87C,09:35:21 INFO] [DevNodesChanged]
[SERVICE: 0x87C,09:35:22 INFO] [DevNodesChanged]
[SERVICE: 0x87C,09:35:23 INFO] [DevNodesChanged]
[SERVICE: 0x87C,09:35:23 INFO] [DevNodesChanged]
[SERVICE: 0x87C,09:35:23 INFO] [DevNodesChanged]
[SERVICE: 0x87C,10:15:57 INFO] [DevNodesChanged]
[SERVICE: 0x87C,10:15:57 INFO] [DevNodesChanged]
[SERVICE: 0x87C,10:15:57 INFO] [DevNodesChanged]
[SERVICE: 0x87C,10:15:58 INFO] [InterfaceArrival] \\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a270018314842&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
[SERVICE: 0x87C,10:15:58 INFO] device \\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a270018314842&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
[SERVICE: 0x87C,10:15:58 INFO] device is an iPod
[SERVICE: 0x87C,10:15:58 INFO] type 0x7 drive 0x2 partition 0x0
[SERVICE: 0x87C,10:15:58 INFO] [-1] set waiting to mount = 1
[SERVICE: 0x87C,10:15:58 INFO] [1] Assigning session 0
[SERVICE: 0x87C,10:15:58 INFO] [1] added device interface "\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a270018314842&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}" to m_objDeviceNameMap
[SERVICE: 0x87C,10:15:58 INFO] [1] added state machine 1 to m_objDeviceIdMap
[SERVICE: 0x87C,10:15:58 INFO] [1] added device number 2 to m_objDeviceNumberMap
[SERVICE: 0x87C,10:15:58 INFO] [1] added device interface "\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a270018314842&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}" to m_vctDeviceInterfaces
[SERVICE: 0x87C,10:15:58 INFO] [DevNodesChanged]
[SERVICE: 0x87C,10:15:58 INFO] [1] input #0 from src #0
[SERVICE: 0x87C,10:15:58 INFO] [DevNodesChanged]
[SERVICE: 0x87C,10:15:58 INFO] [1] input #1 from src #0
[SERVICE: 0x86C,10:15:58 INFO] [1] input #0
[SERVICE: 0x870,10:15:58 INFO] [1] input #1
[SERVICE: 0x86C,10:15:58 INFO] [MACHINE 1 INPUT #0] - (HDW) CheckDevNode
[SERVICE: 0x86C,10:15:58 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a270018314842&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0x870,10:15:58 INFO] [MACHINE 1 INPUT #1] - (HDW) CheckDevNode
[SERVICE: 0x870,10:15:58 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a270018314842&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0x87C,10:16:01 INFO] [SIMULATED VOLUME ARRIVAL] generating volume mount for \\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a270018314842&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
[SERVICE: 0x87C,10:16:01 INFO] [VolumeArrive] mask = 0x1FC
[SERVICE: 0x87C,10:16:01 INFO] looking up device # for \\.\I:
[SERVICE: 0x87C,10:16:01 INFO] type 0x7 drive 0x2 partition 0x1
[SERVICE: 0x87C,10:16:01 INFO] iTunes device #2 found with drive letter I, mask 0x100
[SERVICE: 0x87C,10:16:01 INFO] [1] set waiting to mount = 0
[SERVICE: 0x87C,10:16:01 INFO] [1] input #2 from src #0
[SERVICE: 0x87C,10:16:01 INFO] looking up device # for \\.\H:
[SERVICE: 0x87C,10:16:01 INFO] type 0x7 drive 0x1 partition 0x3
[SERVICE: 0x87C,10:16:01 INFO] [SIMULATED INTERFACE ARRIVAL] generating connect event for device 1
[SERVICE: 0x874,10:16:02 INFO] [1] input #2
[SERVICE: 0x874,10:16:02 INFO] [MACHINE 1 INPUT #2] - (HDW) Volume Mount
[SERVICE: 0x874,10:16:02 INFO] ** CItunesDevice::HandleHardwareInput()
[SERVICE: 0x878,10:16:02 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a270018314842&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0x878,10:16:02 INFO] [First Connect] Creating connect event for device 1
[SERVICE: 0x878,10:16:02 INFO] [1] set waiting to mount = 1
[SERVICE: 0x878,10:16:02 INFO] [1] input #3 from src #0
[SERVICE: 0x87C,10:16:02 INFO] looking up device # for \\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a270018314842&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
[SERVICE: 0x87C,10:16:02 INFO] type 0x7 drive 0x2 partition 0x0
[SERVICE: 0x86C,10:16:02 INFO] [1] input #3
[SERVICE: 0x87C,10:16:02 INFO] looking up device # for \\.\G:
[SERVICE: 0x87C,10:16:02 INFO] type 0x7 drive 0x1 partition 0x2
[SERVICE: 0x87C,10:16:02 INFO] [SIMULATED INTERFACE ARRIVAL] generating connect event for device 1
[SERVICE: 0x87C,10:16:02 INFO] looking up device # for \\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a270018314842&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
[SERVICE: 0x87C,10:16:02 INFO] type 0x7 drive 0x2 partition 0x0
[SERVICE: 0x87C,10:16:02 INFO] looking up device # for \\.\F:
[SERVICE: 0x87C,10:16:02 INFO] type 0x2 drive 0x0 partition 0xffffffff
[SERVICE: 0x87C,10:16:02 INFO] [SIMULATED INTERFACE ARRIVAL] generating connect event for device 0
[SERVICE: 0x87C,10:16:02 INFO] looking up device # for \\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a270018314842&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
[SERVICE: 0x87C,10:16:02 INFO] type 0x7 drive 0x2 partition 0x0
[SERVICE: 0x87C,10:16:02 INFO] looking up device # for \\.\E:
[SERVICE: 0x87C,10:16:02 INFO] type 0x7 drive 0x1 partition 0x1
[SERVICE: 0x87C,10:16:02 INFO] [SIMULATED INTERFACE ARRIVAL] generating connect event for device 1
[SERVICE: 0x86C,10:16:02 INFO] [MACHINE 1 INPUT #3] - (HDW) Interface Arrival
[SERVICE: 0x86C,10:16:02 INFO] [1] progress state is 2, Waiting to mount = 1
[SERVICE: 0x86C,10:16:02 INFO] [1] progress is now 2
[SERVICE: 0x86C,10:16:02 INFO] [1] progress is now 2
[SERVICE: 0x86C,10:16:02 INFO] [MACHINE 1 TRANSITION] - {Unknown} ==> {Connected}
[SERVICE: 0x86C,10:16:02 INFO] [MACHINE 1 ACTIONS] - {Connected}
[SERVICE: 0x86C,10:16:02 INFO] [1] SCSI Inquiry attempt #0
[SERVICE: 0x86C,10:16:02 INFO] VendorId: Apple
[SERVICE: 0x86C,10:16:02 INFO] ProductId: iPod
[SERVICE: 0x86C,10:16:02 INFO] revision: 1.62
[SERVICE: 0x86C,10:16:02 INFO] vendor bytes:
[SERVICE: 0x86C,10:16:02 INFO] 02 01 00 00 00 00 00 00 00 0C 00 06 92 00 00 00 00 00 00 00
[SERVICE: 0x86C,10:16:02 INFO] [1] firmware version: 1.62 (0x13E)
[SERVICE: 0x86C,10:16:02 INFO] [1] Power State: Powered
[SERVICE: 0x86C,10:16:02 INFO] [1] Checkpoint attempt #0
[SERVICE: 0x87C,10:16:02 INFO] looking up device # for \\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a270018314842&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
[SERVICE: 0x87C,10:16:02 INFO] type 0x7 drive 0x2 partition 0x0
[SERVICE: 0x87C,10:16:02 INFO] looking up device # for \\.\D:
[SERVICE: 0x87C,10:16:02 INFO] type 0x7 drive 0x0 partition 0x3
[SERVICE: 0x87C,10:16:02 INFO] [SIMULATED INTERFACE ARRIVAL] generating connect event for device 0
[SERVICE: 0x86C,10:16:02 ERROR] Did not find first letter of stage
[SERVICE: 0x86C,10:16:02 INFO] got HotPlugState 0
[SERVICE: 0x86C,10:16:02 INFO] [1] serial number 000A270018314842
[SERVICE: 0x86C,10:16:02 INFO] [1] *** CONNECTED - Sending event out, device session 0.
[SERVICE: 0x87C,10:16:02 INFO] looking up device # for \\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a270018314842&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
[SERVICE: 0x87C,10:16:02 INFO] type 0x7 drive 0x2 partition 0x0
[SERVICE: 0x87C,10:16:02 INFO] [SIMULATED VOLUME ARRIVAL] generating volume mount for \\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a270018314842&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
[SERVICE: 0x87C,10:16:02 INFO] [VolumeArrive] mask = 0x1FC
[SERVICE: 0x87C,10:16:02 INFO] looking up device # for \\.\I:
[SERVICE: 0x87C,10:16:02 INFO] type 0x7 drive 0x2 partition 0x1
[SERVICE: 0x87C,10:16:02 INFO] iTunes device #2 found with drive letter I, mask 0x100
[SERVICE: 0x87C,10:16:02 INFO] [1] set waiting to mount = 0
[SERVICE: 0x87C,10:16:02 INFO] [1] input #4 from src #0
[SERVICE: 0x870,10:16:02 INFO] [1] input #4
[SERVICE: 0x87C,10:16:02 INFO] looking up device # for \\.\H:
[SERVICE: 0x87C,10:16:02 INFO] type 0x7 drive 0x1 partition 0x3
[SERVICE: 0x87C,10:16:02 INFO] [SIMULATED INTERFACE ARRIVAL] generating connect event for device 1
[SERVICE: 0x87C,10:16:02 INFO] looking up device # for \\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a270018314842&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
[SERVICE: 0x87C,10:16:02 INFO] type 0x7 drive 0x2 partition 0x0
[SERVICE: 0x87C,10:16:02 INFO] looking up device # for \\.\G:
[SERVICE: 0x87C,10:16:02 INFO] type 0x7 drive 0x1 partition 0x2
[SERVICE: 0x87C,10:16:02 INFO] [SIMULATED INTERFACE ARRIVAL] generating connect event for device 1
[SERVICE: 0x87C,10:16:03 INFO] looking up device # for \\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a270018314842&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
[SERVICE: 0x87C,10:16:03 INFO] type 0x7 drive 0x2 partition 0x0
[SERVICE: 0x87C,10:16:03 INFO] looking up device # for \\.\F:
[SERVICE: 0x87C,10:16:03 INFO] type 0x2 drive 0x0 partition 0xffffffff
[SERVICE: 0x87C,10:16:03 INFO] [SIMULATED INTERFACE ARRIVAL] generating connect event for device 0
[SERVICE: 0x870,10:16:03 INFO] [MACHINE 1 INPUT #4] - (HDW) Volume Mount
[SERVICE: 0x870,10:16:03 INFO] [MACHINE 1 TRANSITION] - {Connected} ==> {Mounted}
[SERVICE: 0xD40,10:16:03 INFO] <0x4> Got Serial #
[SERVICE: 0x87C,10:16:03 INFO] looking up device # for \\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a270018314842&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
[SERVICE: 0x87C,10:16:03 INFO] type 0x7 drive 0x2 partition 0x0
[SERVICE: 0x87C,10:16:03 INFO] looking up device # for \\.\E:
[SERVICE: 0x87C,10:16:03 INFO] type 0x7 drive 0x1 partition 0x1
[SERVICE: 0x87C,10:16:03 INFO] [SIMULATED INTERFACE ARRIVAL] generating connect event for device 1
[SERVICE: 0x870,10:16:03 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a270018314842&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0x870,10:16:03 INFO] [MACHINE 1 ACTIONS] - {Mounted}
[SERVICE: 0x870,10:16:03 INFO] [1] progress state is 2, Waiting to mount = 0
[SERVICE: 0x870,10:16:03 INFO] [1] progress state is 2, Waiting to mount = 0
[SERVICE: 0xF74,10:16:03 INFO] [1] Progress state is 2, Waiting to disconnect = 0
[SERVICE: 0xAD8,10:16:03 INFO] Mounted
[SERVICE: 0xAD8,10:16:03 INFO] [1] already mounted!
[SERVICE: 0x87C,10:16:03 INFO] looking up device # for \\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a270018314842&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
[SERVICE: 0x87C,10:16:03 INFO] type 0x7 drive 0x2 partition 0x0
[SERVICE: 0x87C,10:16:03 INFO] looking up device # for \\.\D:
[SERVICE: 0x87C,10:16:03 INFO] type 0x7 drive 0x0 partition 0x3
[SERVICE: 0x87C,10:16:03 INFO] [SIMULATED INTERFACE ARRIVAL] generating connect event for device 0
[SERVICE: 0x870,10:16:03 ERROR] Did not find first letter of stage
[SERVICE: 0x870,10:16:03 INFO] got HotPlugState 0
[SERVICE: 0x870,10:16:03 INFO] [1] OS says filesystem is FAT32
[SERVICE: 0x870,10:16:03 INFO] File does not exist!
[SERVICE: 0x870,10:16:03 INFO] [1] iTunes Preference file does not exist!
[SERVICE: 0x870,10:16:03 INFO] [1] ===== iPod Nano =====
[SERVICE: 0x870,10:16:03 INFO] [1] progress state is 2, Waiting to mount = 0
[SERVICE: 0x87C,10:16:03 INFO] looking up device # for \\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a270018314842&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
[SERVICE: 0x87C,10:16:03 INFO] type 0x7 drive 0x2 partition 0x0
[SERVICE: 0x87C,10:16:03 INFO] [VolumeArrive] mask = 0x100
[SERVICE: 0x87C,10:16:03 INFO] looking up device # for \\.\I:
[SERVICE: 0x87C,10:16:03 INFO] type 0x7 drive 0x2 partition 0x1
[SERVICE: 0x87C,10:16:03 INFO] iTunes device #2 found with drive letter I, mask 0x100
[SERVICE: 0x87C,10:16:03 INFO] [1] set waiting to mount = 0
[SERVICE: 0x87C,10:16:03 INFO] [1] input #5 from src #0
[SERVICE: 0x878,10:16:03 INFO] [First Connect] Creating mount event for device 1
[SERVICE: 0x878,10:16:03 INFO] [VolumeArrive] mask = 0x1FC
[SERVICE: 0x878,10:16:03 INFO] looking up device # for \\.\I:
[SERVICE: 0x878,10:16:03 INFO] type 0x7 drive 0x2 partition 0x1
[SERVICE: 0x878,10:16:03 INFO] iTunes device #2 found with drive letter I, mask 0x100
[SERVICE: 0x870,10:16:03 INFO] 10:16:3, year 2006, day of yr. 348, GMT offset 0 isDST 0
[SERVICE: 0x878,10:16:03 INFO] [1] set waiting to mount = 0
[SERVICE: 0x878,10:16:03 INFO] [1] input #6 from src #0
[SERVICE: 0x878,10:16:03 INFO] looking up device # for \\.\H:
[SERVICE: 0x878,10:16:03 INFO] type 0x7 drive 0x1 partition 0x3
[SERVICE: 0x878,10:16:03 INFO] [SIMULATED INTERFACE ARRIVAL] generating connect event for device 1
[SERVICE: 0x870,10:16:03 INFO] [1] progress is now 0
[SERVICE: 0x87C,10:16:03 INFO] [DevNodesChanged]
[SERVICE: 0x87C,10:16:03 INFO] [1] input #7 from src #0
[SERVICE: 0x878,10:16:03 INFO] looking up device # for \\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a270018314842&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
[SERVICE: 0x878,10:16:03 INFO] type 0x7 drive 0x2 partition 0x0
[SERVICE: 0x878,10:16:03 INFO] looking up device # for \\.\G:
[SERVICE: 0x878,10:16:03 INFO] type 0x7 drive 0x1 partition 0x2
[SERVICE: 0x878,10:16:03 INFO] [SIMULATED INTERFACE ARRIVAL] generating connect event for device 1
[SERVICE: 0x878,10:16:03 INFO] looking up device # for \\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a270018314842&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
[SERVICE: 0x878,10:16:03 INFO] type 0x7 drive 0x2 partition 0x0
[SERVICE: 0x878,10:16:03 INFO] looking up device # for \\.\F:
[SERVICE: 0x878,10:16:03 INFO] type 0x2 drive 0x0 partition 0xffffffff
[SERVICE: 0x878,10:16:03 INFO] [SIMULATED INTERFACE ARRIVAL] generating connect event for device 0
[SERVICE: 0x878,10:16:03 INFO] looking up device # for \\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a270018314842&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
[SERVICE: 0x878,10:16:03 INFO] type 0x7 drive 0x2 partition 0x0
[SERVICE: 0x878,10:16:03 INFO] looking up device # for \\.\E:
[SERVICE: 0x878,10:16:03 INFO] type 0x7 drive 0x1 partition 0x1
[SERVICE: 0x878,10:16:03 INFO] [SIMULATED INTERFACE ARRIVAL] generating connect event for device 1
[SERVICE: 0x878,10:16:03 INFO] looking up device # for \\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a270018314842&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
[SERVICE: 0x878,10:16:03 INFO] type 0x7 drive 0x2 partition 0x0
[SERVICE: 0x878,10:16:03 INFO] looking up device # for \\.\D:
[SERVICE: 0x878,10:16:03 INFO] type 0x7 drive 0x0 partition 0x3
[SERVICE: 0x878,10:16:03 INFO] [SIMULATED INTERFACE ARRIVAL] generating connect event for device 0
[SERVICE: 0x878,10:16:04 INFO] looking up device # for \\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a270018314842&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
[SERVICE: 0x878,10:16:04 INFO] type 0x7 drive 0x2 partition 0x0
[SERVICE: 0x870,10:16:05 INFO] [1] *** MOUNTED - Sending event out, device session 0.
[SERVICE: 0x870,10:16:05 INFO] [1] Auto-launch iTunes ENABLED
[SERVICE: 0x870,10:16:05 INFO] iTunes located at 'C:\Program Files\iTunes\iTunes.exe'
[SERVICE: 0xAD8,10:16:05 INFO] [1] progress state is 0, Waiting to mount = 0
[SERVICE: 0x870,10:16:05 INFO] [1] input #5
[SERVICE: 0x86C,10:16:05 INFO] [1] input #6
[SERVICE: 0x874,10:16:05 INFO] [1] input #7
[SERVICE: 0x870,10:16:05 INFO] [MACHINE 1 INPUT #5] - (HDW) Volume Mount
[SERVICE: 0x870,10:16:05 INFO] ** CItunesDevice::HandleHardwareInput()
[SERVICE: 0x86C,10:16:05 INFO] [MACHINE 1 INPUT #6] - (HDW) Volume Mount
[SERVICE: 0x86C,10:16:05 INFO] ** CItunesDevice::HandleHardwareInput()
[SERVICE: 0x874,10:16:05 INFO] [MACHINE 1 INPUT #7] - (HDW) CheckDevNode
[SERVICE: 0x874,10:16:05 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a270018314842&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0x844,10:16:05 INFO] iTunes already running in current session.
[SERVICE: 0xD40,10:16:05 INFO] <0x4> GetFormatType() returned unknown format 0
[SERVICE: 0xF74,10:16:05 INFO] [1] Progress state is 0, Waiting to disconnect = 0
[SERVICE: 0xF74,10:16:05 INFO] Mounted
[SERVICE: 0xF74,10:16:05 INFO] Device 1 is FAT32 and appears mounted, checking intermediate state...
[SERVICE: 0xF74,10:16:05 INFO] Device 1 not in intermediate state. It appears to be truly mounted.
[SERVICE: 0x858,10:16:05 INFO] <0x4> COM request for device 1 drive letter - I
[SERVICE: 0xF74,10:16:05 INFO] Mounted
[SERVICE: 0xF74,10:16:05 INFO] Device 0 is FAT32 and appears mounted, checking intermediate state...
[SERVICE: 0xF74,10:16:05 INFO] Device 0 not in intermediate state. It appears to be truly mounted.
[SERVICE: 0xF74,10:16:05 INFO] File does not exist!
[SERVICE: 0xF74,10:16:05 INFO] [1] CreateFileW error 0x3
[SERVICE: 0xF74,10:16:05 INFO] [1] WriteNewPrefs FAILED!
[SERVICE: 0xF74,10:16:05 INFO] [1] ReadDevicePreferences() failed!
[SERVICE: 0x858,10:56:59 INFO] [1] Progress state is 0, Waiting to disconnect = 0
[SERVICE: 0x858,10:56:59 INFO] Mounted
[SERVICE: 0x858,10:56:59 INFO] Device 1 is FAT32 and appears mounted, checking intermediate state...
[SERVICE: 0x858,10:56:59 INFO] Device 1 not in intermediate state. It appears to be truly mounted.
[SERVICE: 0xCFC,10:56:59 INFO] Mounted
[SERVICE: 0xCFC,10:56:59 INFO] [1] already mounted!
[SERVICE: 0xCFC,10:56:59 INFO] [1] progress state is 0, Waiting to mount = 0
[SERVICE: 0x858,10:56:59 INFO] Mounted
[SERVICE: 0x858,10:56:59 INFO] Device 0 is FAT32 and appears mounted, checking intermediate state...
[SERVICE: 0x858,10:56:59 INFO] Device 0 not in intermediate state. It appears to be truly mounted.
[SERVICE: 0x858,10:56:59 INFO] File does not exist!
[SERVICE: 0x858,10:56:59 INFO] [1] CreateFileW error 0x3
[SERVICE: 0x858,10:56:59 INFO] [1] WriteNewPrefs FAILED!
[SERVICE: 0x858,10:56:59 INFO] [1] ReadDevicePreferences() failed!
[SERVICE: 0xD68,10:56:59 INFO] [1] Progress state is 0, Waiting to disconnect = 0
[SERVICE: 0xD68,10:56:59 INFO] Mounted
[SERVICE: 0xD68,10:56:59 INFO] Device 1 is FAT32 and appears mounted, checking intermediate state...
[SERVICE: 0xD68,10:56:59 INFO] Device 1 not in intermediate state. It appears to be truly mounted.
I think a more comprehensive format might solve the problem. Anyone with any ideas.

see if this helps
http://docs.info.apple.com/article.html?artnum=93716

Can anyone point me in the right direction for the link to download Acrobat 9 Standard? I found the link to download 9 Pro but not standard. Old computer crashed and new computer does not have a CDR/DVD rom drive.

Can anyone point me in the right direction for the link to download Acrobat 9 Standard. I found the link to download 9 Pro but not standard. Old computer crashed and new computer does not have a CDR/DVD rom drive.

Hi,
Standard or Pro would be licensed through your serial number, the download link and downloaded file would be the same for both of them.
Pro or Standard would be determined after you put in your serial number.
Download Acrobat products | 9, 8
Thank You
Arjun

I'm trying to install adobe acrobat XI pro, the trial version. The Install Download Assist pops up but the program doesn't install. I do see a file named XI Pro, but not a program. It seems the program never completely downloads. Any suggestions? Thanks.

I've tried to download the trial version of Acrobat XI pro but it's not working. The time bar is active for the download and indicates that it will take two hours. When I come back, the screen has gone back to the "install free trial here" page. I do see a file for XI Pro, but not a program.

try a direct download,
Downloads available:
Suites and Programs: CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 12 | 11, 10 | 9, 8, 7
Photoshop Elements: 12 | 11, 10 | 9,8,7
Lightroom: 5 | 4 | 3
Captivate: 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

I'm trying to load a student version of Acrobat XI Pro but not sure how to get the serial number to validate I'm a student

I'm trying to load a student version of Acrobat XI Pro but not sure how to get the serial number to validate I'm a student

Hi ,
Could you please tell me form where did you purchase the Student version of Acrobat ?Is it through Adobe or some outside vendor ?
Is it the first time you are trying to access it ?
If yes ,then you must have received your serial number along with your product .
If not ,then how how did you manage to get your serial number and access Acrobat before ?
Regards
Sukrit Dhingra

Is the retina display for the new mac book pro worth the extra cost? I'm buying a new mac book pro but not sure about the retina display.

Is the retina display for the new mac book pro worth the extra cost? I'm buying a new mac book pro but not sure about the retina display.

There is a US$10 adapter from old power adapter to new MacBook Pro.
MagSafe to MagSafe 2 Converter
The MagSafe to MagSafe 2 Converter allows you to use the MagSafe connector on your LED Cinema Display, Thunderbolt Display, or MagSafe Power Adapter to charge your MagSafe 2-equipped Mac computer.
For battery life, check the latest Software Update for the fix for most problems.

Parallels Desktop v3.0 corrupts downloads on Mac Pro but not on MacBook Pro

Parallels Desktop for Mac version 3.0 is corrupting downloads and updates on my Mac Pro, but not on my MacBook Pro. Symptoms include the message "The digital signature for this package is incorrect. The package may have been tampered with or corrupted since being signed by “Apple” when downloading a software update. Downloading a dmg software package fails at the end of the download with a "Verification failed" message. Trying to mount the package manually fails with codec overrun error. These are symptoms of a corrupted download.
The problem disappears when I uninstall Parallels. It reappears if I reinstall Parallels. My Mac Pro and MacBook Pro are nearly identical in installed software. I have reviewed the problem with AppleCare in excruciating detail (an hour yesterday and another hour today with an AppleCare Specialist). It is a new issue to them. We have send a support request email to Parallels.com.
This has been a difficult problem to troubleshoot. I had tried every suggestion that I could find on the forum under "Digital Signature is incorrect", "Verification failed", "codec overrun", etc., without success. I won't go into the painful details of the troubleshooting process, unless encouraged. But I will update the forum when I know more. Meanwhile, if you have any ideas please pass them on.

The problem has been solved by replacing the Linksys WRT54G Wireless-G Router with an Apple AirPort Extreme 802.11n Wireless Base Station. After completing the installation I was able to successfully download my test .dmg files on the both the Mac Pro and the MacBook Pro with Parallels 3.0 installed.
Before I had made this change I had worked with a Parallels tech support expert. (By the way, they were very responsive.) We had tried a number of things without success, including disconnecting and restarting the cable modem and router.
I don't know why this change in routers worked. It couldn't be related the WEP encryption on the Linksys versus the WPA2 security on the Airport Extreme because the problem was not with the wireless connection to the MacBook Pro. The problem was with the Mac Pro, which was connected via an ethernet cable, in both cases.
I am now happy, but confused.

Smart Playlists on Zen Vision:M and Creative Media Organizer Software

I come from the iPod world, where, once a playlist is created in iTunes, the playlist is transferred to the iPod, and is automatically updated each time you sync. That's why it's called "smart" playlist.
I can create a smart playlist using the Creative Media Organizer software. It automatically updates the playlist, based on the rules I defined. However, the playlist created on the Media Organizer does NOT get transferred to the Vision:M player! What's the point in that?
I can, of course, copy the smart playlist to the Vision:M manually... but there are two HUGE problems with that...
) The smart playlist becomes a "static" playlist... it does not get updated when you sync -- the music in the playlist never changes (even though the original smart playlist is updated on each sync),
2) The software recopies the *music* back to the Vision:M each time you create a playlist! This means that it overwrites the music that was there, with the (same) music in the playlist!! This takes FOREVER, if there are a lot of titles in the playlist! This is obviously a brain-dead way of doing things! All the software/Vision:M needs to do, is to copy the actual music files that don't currently exist on the player, and then create a text file that contains the *location* of the music... in other words, an M3U playlist file! One of the (many) issues with doing things the way this software does it, is that each time a track appears in a separate playlist, a duplicate entry for that song appears in the Vision:M's music list! So, if you have 5 playlists, and each one contains "Mozart's 5th", then when you list all the songs on your Vision:M, you'll get 5 copies of "Mozart's 5th" listed! Dumb!
Any way around these problems? Can I have smart playlist that gets transferred to the player so that it contains only the songs I want? Does it *have* to recopy ALL the songs to the player, each time I create a playlist? Does it *have* to add duplicate entries to the list of files on my Vision:M?
Is the software *really* as dumb as I think it is, or am I just being a BDU (Brain Dead User)?

You can only automatically sync playlists using Windows Media Player 0 as far as I know. There's lots of other software out there that can use the Media Transfer Protocol of the Vision:M, but I'm not sure what they can do.
Creative's software is desperately lacking in the playlist sync area, so you're not being a BDU

Thumb drive works on MacBook Pro but not on Mac desk top

I have bought two separate thumb drives that are MAC/PC compatible. They will work on my MacBook Pro but not my desk top Mac. Both are less than a year old. Desk top will read older thumb drives w/o problems, but not the new ones.

Model Name:          iMac
Model Identifier:          iMac11,3
Processor Name:          Intel Core i5
Processor Speed:          2.8 GHz
Number Of Processors:          1
Total Number Of Cores:          4
L2 Cache (per core):          256 KB
L3 Cache:          8 MB
Memory:          4 GB
Processor Interconnect Speed:          4.8 GT/s
Boot ROM Version:          IM112.0057.B00
SMC Version (system):          1.59f2
Serial Number (system):          QP05*****NR
Hardware UUID:          282E0143-F041-56A4-8A82-C*****A59
Is there anything else you need to trouble shoot this?
Melissa
<Edited by Host>

I keep getting kicked off of my wifi with my MacBook Pro but not with my IPAD?

I keep getting kicked off of my wifi with my MacBook Pro but not with my IPAD, what do I do?

Hi, mmayers.
Sometimes a simple power cycle of the router can correct the issue that you are experiencing. However, the issue could be a little more complex. Wi-Fi routers need adjustments to settings periodically for optimized performance with the constant progression of wireless device technology. Below, I have included two articles. The first article will cover basic Wi-Fi troubleshooting. The second article covers the recommended settings for current Wi-Fi access points.
Wi-Fi: How to troubleshoot Wi-Fi connectivity
http://support.apple.com/kb/HT4628
iOS and OS X: Recommended settings for Wi-Fi routers and access points
http://support.apple.com/kb/ht4199
Cheers,
Jason H.

How do I see other subscribers photos on a shared photo stream on iPad Air? I can see all people on Mac book pro, but not iPad Air.

How do I see the other subscribers photos on a shared photo stream on iPad Air? I can see everyone on mac book pro, but not ipad. I can only see myself and the owner. Please help.
thanks

Hello there, missjanellez.
The following link from the online iCloud Help menu provides some practical information in regards to shared stream functionality:
Manage Subscribers to your shared streams.
http://help.apple.com/icloud/#/mmc0cd7bfa
On an iOS 7 device
In the Photos app, tap Shared at the bottom of the screen, then tap Streams at the top of the screen.
Tap the shared stream whose subscribers you want to manage, then tap People.The Activity stream doesn’t have subscribers.
Do any of the following:
To invite more people, tap Invite People, enter email addresses or tap the Add button to select from your contacts, then tap Add.
To remove a subscriber, tap the subscriber, then tap Remove Subscriber.
To choose whether subscribers can add photos and videos, tap Subscribers Can Post.
If the subscriber list doesn’t include Invite People, you don’t own the shared stream.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro

Zen Vision M Recognized by XP Pro, but not by Creative Media Organizer or other transfer softw

Similar Messages

Maybe you are looking for