Zen Vison M 30GB won't s

Hey everyone I got a problem with my player. It does not seem to sync with my computer. I tried uninstalling drivers and reinstalling them however that did not work. Every time I plug in the player I get a message that states windows could not recognize the USB device. The player wont show up on the device manager or on other computers. I figure I might have to wipe the player clean, but I have no idea how to go about doing that. Creative support refuses to help because the player is a little over a year old. Any feedback would be appreciated.
Thanks

"Re: Zen Vision:M 30gb Won't ChargeI
TheNewZackMorri wrote:
Hey guys. New to the forum and hope you all can give me some help.
I've had the Zen Vision:M 30gb for a while and it's acting strangely. If I connect the player to a USB port or to a wall charger, it will not charge. It simply turns the player on, but never charges. If connected to USB it will say it is docked, but won't charge.
Any idea what is going on? I've the latest firmware installed and have tried on multiple computers and have gotten the same result. These compures range from XP SP3 to Vista SP. Both systems have the latest drivers installed.
Any help you all can give me would be greatly appreciated.
Is the battery holding a charge? Does the player only work when connected to a source of power?Does the player feel really warm or hot when plugged in? How long have you had the player? The average life of the internal battery is about 3yrs.from date of manufacturing.other than not charging? does the player work as it should?Does the charging icon show?

Similar Messages

  • Zen Vision:M 30GB won't power down; any ide

    I've had a 30GB Zen Vision M for a couple of months now! Awesome player, went through the usual round of recognition problems, but it's been working fine of late. My problem is, it won't power down now. When I try to power down, the unit says it's powering down, the dispaly goes black except for the battery icon. And it stops there. The blue backlight on the menu buttons stays on, the battery icon stays on, and eventually it turns off after 5 minutes because of being idle. Not a terrible problem I know, but a real niusance. I am running the most current firmware (have been for a while). I've tried resetting and clean-up. No change. I'm afraid of trying to reinstall the firmware, in case I have the same problem that many others are having, and go from a good player with a power issue, to a player that does nothing. I can't see it being the power switch itself, since it powers up fine, and tries to power down. Any ideas or advice would be greatly appreciated. birder

    Hello Dsgrov,
    Welcome to Creative forums!
    You can get a lot of results if you search "Zen Vision M not charging" on the search box.
    Here's one, you might want to check this thread.

  • My zen vision m 30gb won't charge or turn on without p

    I have had it for about 2 years.
    I haven't used it for about a week during which time it has been completely out of battery power. I plug the charger into the mp3 and the the lightning bolt shows on the zen? but even after leaving it on charge for a good few hours overnight when i unplug it, it just goes dead, and won't come on.
    I then tried to charge it through the usb on my pc but it gets no power to the player. and therefore w0on't come on.
    I then tried resetting the zen and doing the above two again but got the sdame outcome.
    So i tried the the recovery method which wiped my zen free of everything ( i had backups, thankfully).
    Tried the first two thiong again but to no avail.
    I can do the last option which is the firmware option, because i can't connect to a pc.
    Has my zen mgone kaput or can it be saved?!
    tHANKS in advance
    Steve

    Sounds like you need to replace the battery here's the info to open the player for that? http://www.youtube.com/watch?v=akJDRpx6rA8? Here's a link to get a battery for the player? http://www.infinitybatteries.com/p-4...n-polymer.aspx

  • Zen Vision M 30gb Won't charge and not being recognized on any comput

    Can you give me some pointers. The charge went completely depleted and no computer recognizes it
    when I plug in by usb. Any suggestions?

    Hello Dsgrov,
    Welcome to Creative forums!
    You can get a lot of results if you search "Zen Vision M not charging" on the search box.
    Here's one, you might want to check this thread.

  • Zen Vision:M 30GB recognition problems...Big t

    Hi, 2 days ago i ran into a problem with my Zen. I had to charge it, as the battery was low and had to put some new music on it.. I plugged it into the USB port on my Laptop, where all of it's software is installed. The Zen wasn't recognized. Instead of the charging screen it normally started up with, it started up with the play screen(the screen it shows when a song is playing). I looked at the battery icon in the top right corner, and it wasn't doing anything. I turned the Zen off and started it up again. Nothing changed. I restarted my computer. Nothing changed. I shut down my computer and started it back up again. Nothing changed.
    I took it to my desktop computer, a Compaq, and tried it there. It worked, but not how i was expecting it to work. The battery icon started flashing with the little lightning bolt, acknowledging that it was charging. But the play screen was still there. The odd thing with this is, i left the player to charge for several hours. When i came back, the Zen was in some form of idle shut-down. The screen was black, except for the battery icon with the lightning bolt. Oddly enough, he battery bar hadn't filled up anymore than when i left it. Upon unplugging the player though, the Zen turned off. When i turned it back on, the bar had filled up more. It wasn't fully charged though.
    I plugged the cable back into it, and this time, the battery icon WASN'T charging. It just had the play screen on. It wasn't doing ANYTHING this time. Frustrated, i went out and bought the wall charger, and now i have a full battery. But it doesn't solve why my computer won't recognize my player.
    Today, i un-installed the software that came with the player and re-installed it. It didn't do anything. I installed the software on my desktop computer, and THAT didn't work either. So i came to the website here and used the trouble-shoot guide. That didn't help, and this is where my problem differs from the other posters here who have recognition problems:
    Back to my laptop: I have Windows Service Pack 2. I installed Windows Media Player . I went to the Device Manger, like the trouble-shoot guide said to. The kicker: Windows Portable Devices is NOT, i repeat NOT in my Device Manager. Neither does the Creative player either. I clicked on "The player does not appear in Device manager". That link showed me a diagram of a desktop computer, so went back to my desktop computer. I did everything above mentioned, and Windows Portable Devices is not in the device manager of my desktop computer either. Further reading the trouble-shoot guide, i could NOT locate "Other Devices" or "Unknown Devices" in my Device Manger on either desktop or laptop. There's nothing "Creative" related or "Zen" related at all in any of the Device programs.
    I don't know what to do. All of the trouble-shoot guides don't discuss my issue at all. Everything is "If an MP3 player is reported working properly in Device Manager, but it is not detected or listed in Windows Media Player or Creative Media Explorer..."
    Mine isn't even detected in Device Manager. My Device Manager has nothing regarding my Zen or Windows Portable Devices.
    I'm thinking about messing with it in Recovery mode, but i don't want to erase everything i have on here, just to have my player still not work. I'm going to try messing with this at my friend's house to check the cable and the player there too.
    But any help regarding my situation would be greatly appreciated. This is driving me crazy.

    I tried my uncle's Zen Vision: M 30GB on my laptop and strange things happened. My laptop recognized the player as an unknown device and said i needed to install the MTP driver. I did that, and upon doing so, my laptop recognized my Uncle's player as a Portable device, allowing me to transfer songs to his player. But it STILL doesn't recognize MY player. Email support says i have to send it in for repairs, but i don't know...
    Any luck with you?

  • Zen Vision M 30gb firmware issue (&quot

    Hi im just hoping someone could help me, my zen vision m 30gb?froze and i had to format it to get it to work again but, then i got firmware problems after this. so i tried to install a new firmwarei downloaded .6 firmware and clicked the remove firmware button?and tried to install but it still won't install no matter what i try. Anyone have any ideas to help??PS the player made weird clcking noises before i could format it. Thanks :smileyindifferent:?

    Haha yeah but, the problem is I didn't drop it!:smileyindifferent:?im goin to see can I send it back for repairs or get a new , suppose thats all i can do....?thanks

  • Zen Vision M 30GB Warre

    Hello i own a creative zen vision m 30GB and no that the new creative zen has come out I have heard that they won't be making any hardisk MP3 players again so i was wondering if my Zen Vision M broke now would it still be coverd in warrenty and what would happen?

    Actually from what I have been reading, creative is working on another hard-dri've based player which is supposed to incorporate a lot of cool stuff. I am sure your m vision would be covered under their warranty given that you either purchased that extra warranty from them or have a problem within the manufacturers warranty.

  • Zen Vision: M 30gb issue

    I just recently acquired a 30gb zen vision m off ebay. I love it...one of the biggest differences I noticed over my Zune was that it doesn't inject (and in fact kills) noise going into my system The zune shot the nice little alternator whine into my speakers...this doesn't
    There's just one little annoyance (actually it's big). Almost everytime whenever I turn on the zen, my touchpad buttons won't respond. The only thing that works is up/down for volume...after enough mashing I eventually get to a "My Shortcuts" screen, where I can't really do anything. Now I've noticed this: if I hit a button and it doesn't respond, if I throw the switch into Lock, and back to unlock, it'll process a button press...one, at a time. So I basically have to keep locking/unlocking the player to get it to process any button presses... I've noticed that if I turn the player back on, then lock it, and unlock it without doing anything else, it'll work fine...mostly.
    Yes, I've already done firmware update to .62.02/formatted/ran a cleanup. Nothing has resolved this problem...not sure what to do here.
    I'd imagine it's not under warranty, so if there's a hardware problem that I can try to correct I'm all ears.

    Unfortunately I am unable to return it. I bought it used. Also just struck me that the the left-direction on the touchpad doesn't function...
    I have more than enough capabilities to crack this open and examine the hardware. Anything I should be looking out for? What's strange is the locking/unlocking will process button presses, and once the "button press queue" is cleared out by the locking/unlocking, it functions just fine...with the exception of the left-direction on the touchpad.

  • Creative Zen Vision M 30gb and Vista.

    Is there a way to get a Creative Zen Vision M 30gb to work on a Vista computer? It will save me buying my son a new MP3 player. Thanks.

    I've been in touch with Creative support for over a week now but so far without success. Every time I download links they suggest I still can't access Creative Media Explorer, I just keep getting this error message:-
    "The Creative Media Explorer that is compatible with this device is not installed. Please reinstall the application and try again"
    This has included deleting all previously installed Crteati've files as well as downloading in a 'Clean Boot'. I've also rebooted my Zen Vision M.
    At this rate I'll have to bin the Zen and look at an ipod:manmad:

  • Creative zen : vision M 30gb strange problem

    ,Creative zen : vision M 30gb strange problem. Hi people,
    My mp3 player is 2 and a half years old. A few months ago he didn't charge anymore. ?I thought i could repair it by buying a new battery and install him in my mp3.
    Afther a few ours of ?assembling it was ready for charging a thought..
    I used the usb charger and de sync adapter...
    the morning after, my mp3 is not charged and only showing me a little red stripe in de battery (right top) i can listen music but only for a few minutes...
    Also my PC does noet see my MP3
    tested on :
    windows xp service pack 3?
    vista?
    windows 7?
    please help me
    Stijn van Vilsteren?
    DUTCH?
    i am sorry for my pore english !

    Squipy wrote:
    Hi, I stopped using this MP3 for about 2 or so years because I bought a new one. I decided to start using it again and downloaded all the required software but as soon as I unplugged the MP3 from the power outlet, the player died. I can't get it to start up without plugging it into a power outlet. I think it has rechargable battery? Why didn't it recharge itself?
    My second enquiry is about the capacity of the player. When my player was empty, I went into "Information" and it said Total Space: 28GB and Free Space: 2GB. Why is free space only 2GB? Shouldn't it be 28 as well?
    Thanks in advance!
    The battery will only last about 3yrs regardless of use.You will need to change it. Did you scroll down to see the album,picture,track counts? Did you partition part of the dri've for removable storage. You can find instructions to open here ? http://www.youtube.com/watch?v=_Drkr...e=channel_page & ? the battery here(very easy to do) http://cgi.ebay.com/Original-Creative-ZEN-Vision-M-30gb-Battery-LPCS285385_W0QQitemZ400028645679QQcmdZViewItemQQpt ZOther_MP3_Player_Accessories?hash=item40002864567 9&_trksid=p39.c0.m4&_trkparms=72%3A205|66%3A4|65%3 A2|39%3A|240%3A38|30%3A0|293%3A|294%3A200

  • Creative Zen Vision M (30gb) - Is it the end?

    Hi all,
    I've read a lot of posts and think the only way to find a possible solution to my problem is to just post it....
    I've had my Creative Zen Vision M (30gb) for about?2.5 years, apart from crashing a few times, I've always loved it and would never go near Ipod!
    Lately however it's done something, that it has done before which is to suddenly 'remove' about 2000 tracks, it would go funny, crash and reset a few times, recharge with the plug and it was fine again, the tracks 'reappeared'.
    Now it seems when it happened this recent time, 3000 tracks went and I was left with about 000. So i tried formatting everything cause it just wouldn't rectify itself, then I chose to reload the firmware but everytime I tried to connect it to my laptop it would say my player wasn't connected.
    I have recently baught a new laptop with Windows 7 and even without the software it detects it fine and I think I could just drag music over to it now. BUT - It only has 50mb of memory! Plsu MP3 Recovery Tool and online detection firmware thingy justy doesn't think my player is connected or says cannot update firmware on windows 7?
    So my questions?are - how do i fix it's Is my memory fried, would it be worth getting out the old laptop? Where do i go if i want to repair it's Even if it detects it in XP, the software doesn't detect the player.
    Can anyone shine any light here? Am I forced to buy another Creative product or do I jump ship?

    If the XP computer has WMP installed it may not detect the player (the firmware file) It works best on XP /SP2 WMP0 installed. The issue with WMP is a sticky in the MP3 players forum.

  • Zen Vision M 30GB Problems

    Zen Vision M 30GB Problems? I have a used Zen Vision M 30 GB. I have?a few questions, along with some problems.
    My player has to "rebuild" at least twice a day, is that normal?
    When a song is playing, is the song name, length of song, etc supposed to be displayed?
    Now the major problem:
    I can not get either my laptop or desktop to recognize my player.
    On the desktop (Windows XP?SP3)?it seems to constantly refresh the Device Manager as an MTP device. while it continues to do this I can see the device is giving me a Code 0.
    On the laptop (Windows Vista) it searches for a driver, but the search fails. It does not continuously refresh, but still gives me the same "Code 0 This device can not start" message.
    On both computers it says "Docked" on the player when plugged in and also charges.
    The player plays well once it makes it through the "Rebuilding" stage.
    I thought about formatting it, but?I was not sure that would do any good with this problem. Plus there was a lot of music left on the player from the previous owner that I rather like.
    Any help would be greatly appreciated,? Thanks

    smittyknox wrote:
    I have a used Zen Vision M 30 GB. I have?a few questions, along with some problems.
    My player has to "rebuild" at least twice a day, is that normal?
    When a song is playing, is the song name, length of song, etc supposed to be displayed?
    Now the major problem:
    I can not get either my laptop or desktop to recognize my player.
    On the desktop (Windows XP?SP3)?it seems to constantly refresh the Device Manager as an MTP device. while it continues to do this I can see the device is giving me a Code 0.
    On the laptop (Windows Vista) it searches for a driver, but the search fails. It does not continuously refresh, but still gives me the same "Code 0 This device can not start" message.
    On both computers it says "Docked" on the player when plugged in and also charges.
    The player plays well once it makes it through the "Rebuilding" stage.
    I thought about formatting it, but?I was not sure that would do any good with this problem. Plus there was a lot of music left on the player from the previous owner that I rather like.
    Any help would be greatly appreciated,? Thanks
    No rebuilding that often if not normal. You seem to be having symptoms of hardri've issues. Now have you done a cleanup>reboot on the player?CHARGE PLAYER BEFORE DOING THIS? http://forums.creative.com/creativel...ap&thread.id=3? That may help with the constant need to rebuild(kinda like defragging the dri've) Use a REAR usb port when connecting to the computer & try using a different usb cable. DO NOT CHOOSE RELOAD FIRMWARE ON THE RECOVERY MENU

  • Zen Vision:M 30Gb not connected (!) and I'm becoming crazy

    :Zen Vision:M 30Gb not connected (!) and I'm becoming crazyl Hi,
    I tried for week to do something with the Vision 30Gigs of my son, and I don't no what to do now, maybe open the window and throw the zen..
    No, seriously, he still remains in not connected and in Control Panel, system, device manager, always with the yellow sign blinking and tells that no driver is loaded.
    I'm in XP SP3, removed WinMediaPlayer to install the WMP 9 because the 0 is not compatible with SP3 I think,
    The zen is automatically in Recovery mode when boot, because I have tried all the possible and I have erased the firmware by "reload firmware" but without being connected to the computer,
    I tried the recovery tool, but not connected...
    So, I'm sure that some guru has the solution, and I'm convinced that this zen is not dead!
    Thanks in advance for your precious help.
    Ray

    Read everything before you start.
    Rayray wrote:
    Hi,
    I tried for week to do something with the Vision 30Gigs of my son, and I don't no what to do now, maybe open the window and throw the zen..
    No, seriously, he still remains in not connected and in Control Panel, system, device manager, always with the yellow sign blinking and tells that no driver is loaded.
    I'm in XP SP3, removed WinMediaPlayer to install the WMP 9 because the 0 is not compatible with SP3 I think,
    The zen is automatically in Recovery mode when boot, because I have tried all the possible and I have erased the firmware by "reload firmware" but without being connected to the computer,
    I tried the recovery tool, but not connected...
    So, I'm sure that some guru has the solution, and I'm convinced that this zen is not dead!
    Thanks in advance for your precious help.
    Ray
    You're right the Zen is not dead. It needs a firmware to work & it doesn't need to be connected to the computer to erase it. It does however need to be connected to a computer to reload it. First you will need to install WMP0. http://www.filehippo.com/download_wi...edia_player/9/
    You then need to charge the battery When its charged & turned back on you will choose Format>Cleanup. You then connect player to see that Windows can see the device. Once you can see that it is recognized in Device Manager you will Disconnect it from the computer (use rear usb ports)
    You will need to download the firmware file for the player to the desktop & open the file.(do this before you connect the player again)http://support.creative.com/Products...me=MP3+PlayersOn the player before you connect it to the computer that has the firmware file open & ready to go you will choose Reload firmware connect the player to the computer(use rear usb port) choose your language & let it run. (the autoplay window may open DO NOT CLOSE IT)
    The reason it did not work before with WMP9 is that the driver is a part of WMP0.

  • ZEN Vision:M 30GB Battey not recharg

    Has any one else?had any issues with the battery not recharging on the ZEN Vision:M 30GB. The battery Icon does even show that is?recharging. Any suggestions?I emailed Creative Lab support and they told me this below!?All ZEN MP3 players (except ZEN Nano and ZEN Plus) have a rechargeable
    lithium-ion battery. You can charge your MP3 player by connecting it to
    the power adapter (if included with your player), or by connecting it
    to
    a powered USB port on your PC.
    When a MP3 player has not been used or charged over a long period of
    time, it can take up to 60 minutes for the charging icon to appear when
    it is being charged

    Mine is doing that too... I had to send my other one in because it lost power and so they sent me this one, and I have a power adapter for the wall, which for as?long as I left in on there (4 hours) it should be showing some charge, but nothing.Right now, its?"charging" from my computer and I'm importing videos to it, so hopefully it shows something.

  • Zen Vision M 30gb Prob

    I have a relati'vely new Zen Vision M 30gb player, which as of today stopped working.
    It will not turn on, will not charge or interface with the computer. When plugged into the computer a blue light flashes at the top of the player, and the same occurs when attempting to turn on. I have tried recovery mode to no avail and the resets do naught.
    Can anyone help me with this problem?

    No helping me. I just got mine about 5 weeks ago and its been working great. I charged it overnight last night to take to the gym and it didn't work. So I though that maybe the outlet I charged it on was popped or something. I verified that it worked. I plugged it in again and I have the blue light, but I just chekced and the battery meter barely had a line, and that was after 7 hours. I unplugged it and it wouldn't turn on. Any idea. I am currently charging it now and there is a blue light again. It just doesn;t seem to hold a charge

Maybe you are looking for

  • Enhance Tuning to a Key for a Single Track

    I am looking to enhance the tuning for a single track but when I go to enhance one track it enhances the tuning for all the tracks. Does anyone know of a way to just enhance the tuning for a single track? Or maybe a way to just export one track out o

  • 10.4.8 does not recognize postscript fonts- help!

    I have a new Mac Pro running 10.4.8, and I have copied all the fonts I used on my old G4 running 10.4.3 into the appropriate place on my hard drive. However, the postscript fonts don't seem to be available to my applications, and I can't activate the

  • Audio in MP4 from captivate

    I have converted a presentation to MP4 but some of my audio has not transferred. Audio transferred with video demostrations (Narration) and training simulation(added on backend  after simulation was recorded,). Audio did not transfer with basic slide

  • Bulk save as psd file not saved with Maximize Compatibility selected in preference

    I want to do a "bulk save as" for psd files that were not saved with Maximize File Compatibility selected in Preferences. I'm trying to import those files into LR5 but I get an error message. Or is there a work around for resolving this issue? I have

  • When trying to view my pics in full screen size a warning sign appears

    In IPhoto I click on the thumbnail photos and I get a triangular warning sign and no photo.  This happened with the original operating system and newly downloaded version as well as new IPhoto.   Consistently does not function!   Suggestions?