[zen x-fi2] issue with transflash music or video playing

Hi All,
i've a xfi-2 player and a 6gb transflash memory.
Every time I try to access music or videos in my microsd section i get this message:
"Ready to build library, This may take a few minutes. Proceed?"
I think that this message should appear only the first time or if i add/remove something. Instead All the times I access music or videos on memory i must wait about 2 minutes before i can play because it must build library, is it normal?
Another question, is it possible on playing mode keep "play buttons" on top, without they automatically hide?It's not a great feature I think.
thanks
Bye

help! I really want the sample pictures, videos und audio back! :mansad:
PLEASE .. one-klick or mail ..:smileyvery-happy:

Similar Messages

I am facing issues with my music on my iOS device. I have five devices connected to my apple id. And out of which a Windows Machine and iPhone is not able to sync the purchased songs on the the Windows machine and the iPhone.

I am facing issues with my music on my iOS device. I have five devices connected to my apple id. And out of which a Windows Machine and iPhone is not able to sync the purchased songs on the the Windows machine and the iPhone. The iPhone4 shows the songs are not supported and on the Windows Machine the songs do not play completely. Can anyone advice what could have gone wrong ? Because rest of the devices are synced to MacBook and they are able to sync the content normally. I have even subscribed to iTunes Match but the problem is still not fixed.

Firstly... a little Clarity...
Devices refer to iDevices... iPod... iPhone... iPad. .. Not Computers.
Authoriation applies ONLY to Computers... of which there is a Limit of 5 per Apple ID.
If the issue is with iTunes on your Windows Computer... Perhaps you need to Re-install iTunes...
See Here... to Uninstall and Re-Install iTunes...
http://www.apple.com/support/itunes/install/

Since upgrading to iOS 7, i have issues with my music player. Looking for a fix

I have just upgraded to iOS 7 on my 4S and now am having issues with my music. I have itunes match but also have music on my phone as well. When I now play music that is on my phone's hard drive, the music just stops playing randomly as if it has lost conection or something. Does anyone have a fix for this?

I've also noticed this on my brand new 5s, I was starting to think it was a hardware proplem utill i saw your post.

HT1535 has anyone had issues with syncing music? i can no longer sync any of my music that was already on my itunes to my phone for some reason???

has anyone had issues with syncing music? i can no longer sync any of my music that was already on my itunes to my phone for some reason???

Since this first message, the "Other" space has increased exponentially. The first time, after the "restore", it increased to over 9 GB. Later, I tried a minor restore again, and now it's over 10 GB. I've seen someone suggest that text messages are to blame. If my text messages are suddenly taking up 4 GB of space, I think we've got bigger problems.

I am having issues with streaming music from iTunes on my MacBook Pro to my audio system through AirPlay. Works perfectly with my iPod Touch. The AirPlay icon appears irregularly in iTunes and when selected doesn't connect. Running latest IOS software.

I am having issues with streaming music from iTunes on my MacBook Pro to my audio system through AirPlay. Works perfectly with my iPod Touch. The AirPlay icon appears irregularly in iTunes and when selected doesn't connect. Running latest IOS software.

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsync all music and resync
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar
You said:
No, I do not want to "factory reset" my iPod. No I do not wish to do anything crazy long or hard to fix this.
That may be necessary, It is not what you want to do/not do but what is required to resolve your problem.

Issues with Zune music player pausing/stopping

So the main reason I got this was for the Zune music player. Has anyone else had issues with the music player pausing automatically? I was using it on a run and it worked fine for a while, then the songs would keep pausing automatically after about 10 seconds. I gave up after unpausing it like 20 times and finished my run in silence. Then today I was listening to the radio, everything was fine for 30 minutes or so, then it shut off. I took it out of my pocket and brought up the radio tuner, and it wouldn't let me change the station, it would just exit out of the screen automatically. Now, several hours later, it seems to be working fine.
Has anyone else had a similar issue? Is there a firmware upgrade or something I can run? Or do I just have a defective unit?

This is not a common problem, from what I've read. So if it were my device, I would get a warranty exchange. The Zune player is the best feature, so I wouldn't put up with the pauses you're describing.

When I burn my imovie I get the IDVD screen with a thumb size video playing in the corner of the screen without audio - weird

When I burn my imovie I get the IDVD screen with a thumb size video playing in the corner of the screen without audio - weird

You can find the serial number either in About this Mc in the Menu bar under the , or it should be on a sticker under the foot of the machine.
If you have the install discs, try booting from them, holding down the c key and then using Disk Utility to check the drive.
You can also boot into Safe mode
To start up into Safe Mode (to "Safe Boot"), do this:
   1. Be sure the computer is shut down.
   2. Press the power button.
   3. Immediately after you hear the startup tone, press and hold the Shift key.
      Tip: The Shift key should be held as soon as possible after the startup tone but not before.
   4. Release the Shift key when you see the gray Apple and progress indicator (looks like a spinning gear).
During the startup in Mac OS X 10.2 through 10.3.9, you will see "Safe Boot" on the Mac OS X startup screen.
During the startup in Mac OS X 10.4 or later, you will see "Safe Boot" on the login window, which appears even if you normally log in automatically.
Please post back with results,
To leave Safe Mode in any version of Mac OS X, restart the computer normally, without holding any keys during startup.

Issue with the music output

There's a major issue with my z1's music output,infact with all audio outputs,the sound quality including the volume is too less to be heard, this us seriously dissapointing as SONY is known for good music output as the trademark representing WALKMAN being an name for best awards. I wana know that is that an issue with my phone or is it the same basic settings with every phone. i want a good high,loud music experience and buying behind xperia z1 was one of many reasons. So please solve this problem as im too much dissappointed
Regards

Hi msd69,
Welcome to the community! Since you're new please be sure that you have checked out our Discussion guidelines.
Have you tried powering the handset in to safemode to see if the audio has changed in volume? this could be related to software or a third party application. use the link below to get the handset in to Safemode for testing.
Safemode instructions
let us know how you get on.
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

Issues with Nokia Music - Nokia 5800 XpressMusic

Hi All,
I just bought my Nokia 5800XM today and I really am enjoying it. However, the issues I'm experiencing with Nokia Music are very frustrating...
In short:
1) I already updated all components, my Nokia itself and all the applications that came with it
2) I already reinstalled Nokia Music after uninstalling it from Add/Remove Programs
3) Main issue is as follows:
-> Downloading Nokia Music itself: No probs
-> Installing it using the Nokia Installer: No probs
-> Starting it up the first time: I do get a welcome screen where I have to fill in a few things (language, if I want to import music right away and such). No errors here.
-> However, when clicking "Next" in this screen, Nokia Music doesn't load at all. I get an error (MS Vista:Application is not responding and MS Vista is searching for a possible solution). A few seconds later MS Vista can't supply a solution, so the only option is to shut Nokia Music down without ever seeing the program.
This is very frustrating. Even more so, since I got 2 vouchers for a total of 125 music clips which I would really like to use besides my future purchases.
I would really appreciate it if someone knows the definite solution for this very irritating issue.
Thanks in advance!

Hi Freekiedee
Try to re-install the nokia music by following these instructions.
1. Close the Nokia Music PC application
2. Go to Add/Remove programs and uninstall Nokia Music
3a. On XP, delete C:\Documents and Settings\<<Windows username>>\Local Settings\Application Data\Nokia\Nokia Data Store
3b. On Vista, delete C:\users\<<Windows username>>\appdata\local\nokia\Nokia Data Store
4. Download and install Nokia Music from http://europe.nokia.com/get-support-and-software/download-software/nokia-music-old/download
http://www.nokia.com/support

Issue with syncing music.

Hi again, New problem
This time after getting Itunes to read the contents of my iPhone, it willnot sync my music.
Apps, Photos and Videos sync but music and ringtones won't.
All my songs are checked boxed to sync, under sync music entire library isselected (around 7.5gb) and The iPhone knows they are all there, it even showsthem all there in blue on the capacity bar. but as soon as I hit sync, it goesthrough the steps, backing up etc. BUT when it gets to the determining tracksto sync, it doesn’t sync any music and the sync is then completed and mycapacity bar at the bottom of the summary page has no blue audio at all, can'teven Sync one song or ringtone.
Now to recap, I had recently had an issue with my iTunes not reading thecontent of my iPhone 4. I bit the bullet and downloaded iFunbox even though myiPhone is not jailbroken, and navigated through to remove the itunesCDB file, ithen had to remove all content from my iPhone as all my stuff was coming up asother in the capacity bar. so I manually deleted all my music, photos etc.
So I am assuming that I must have deleted a wrong file or folder in theresomewhere for now I can't add any music.
I have removed all music from Itunes and manually added them back in butagain. no such luck.
Any help would be much appreciated and thanking you in advance.

can anyone help with this please? im at my wits end trying to make this work.

Zen - AAC: Playback issue with long songs (± 15 min.)

Hi,
I made some tests with AAC Itunes plus files, and I've experiencing playback issue with long songs (when it's about 5 minutes or longer, like the second movement of Beethoven's third).
During?playback, there is random artifacts added, never at the same place.
I cleaned up my Zen 6 Gb and even formated it, and the problem still occurs. The latest firmware is installed.
Is this issue has already been reported?
Thanks.

The Zen does in fact support AAC playback, but it's tricky--I've been dealing with this issue for a while, and I think it's finally solved. First of all, when you say "skipping," do you mean that the track skips ahead further into the same track, or does it skip to the next song with an error message like "There was an error with the audio file"? My problem was with the latter. There are a few possible solutions:
. Delete the erroneous track from your Zen, then re-transfer; in my experience, this corrects the problem, although sometimes it takes a couple of tries.
2. Make sure your AAC file is in iTunes Plus format (you can choose it in the ripping options in iTunes).
3. If you haven't already done so, upgrade to Windows 7. This means upgrading to WMP2, which recognizes AAC files and can transfer them to your Zen. It also means you can download a version of Creative Centrale (from the Creative Support site) specifically for the Zen, which replaces the Zen Media Explorer and Creative Mediasource, and which seems to handle AAC transfers much better (so far, I haven't noticed any of the playback errors, but you never know!). By the way, WMP2 and Creative Centrale will also transfer album art easily to the Zen.
Hope this is helpful.

Video export issues with 5D mk II video

Using a trial version I keep running into issues with video slideshow export.
I have some 1080p '24fps' video clips from the 5D II, added them to a new Slideshow, did a Custom Export to h264 with height 720 (which from memory took the width to 1152) and 24fps - I want this to play on AppleTV, but the resulting video starts ok, but has multiple sections of blank video - in QT the frame rate has also been upped to 36fps!
It also takes a ridiculous amount of time to export a short clip, but that's seems par for the course for many of Apple's apps. This is on a 2008 8x3GHz Mac Pro with plenty of RAM, though running Leopard.
Anyone done any A/Bs of performance in Leopard vs Snow Leopard - does it make better usage of multiple cores? (They all have a little activity but it's 10% or so, perhaps 1 core at 70-80%, I can't understand even if it's not using all fully why one isn't getting maxed out with the conversion process).
The slideshow export function seems incredibly buggy - it used to output using AppleTv preset with incompatible frame rates, though they may have fixed that.
Message was edited by: Alley_Cat

DLScreative wrote:
Just a thought, but 24p was just added to the markII through a firmware update.
Yes, which is why I thought it would be great for AppleTV which can only officially support 720p at 24fps (though 25fps will often work).
If I use an AppleTv preset it will now rescale to 960x540, but I want to use 1280x720.
Previously in 3.0 the AppleTV preset output 720p but at 30fps which is too high for AppleTV.
Are you sure it's not the footage? Have you tried it in FCP? Also, it maybe that 24p isn't supported in A3, but this all just conjecture on my part.
Good thought, but I would imagine QT is the engine supporting the Aperture exports, and if parameters are set correctly it should give the appropriate output.
I'll try using QT Pro and see what that does with a clip.

Z77A-GD65 issues with Geforce GTX 780 Video Card

Hey Guys,
I have a issue with a new PC build.
I think it may be a driver or BIOS setting issue, I hope
I bought a MSI Z77A-GD65 motherboard and below are the specs:
- Intel Core i7-2600 CPU 3.4 Ghz
- BIOS Version E4451IMS V10.8
- Balistix Sport 8GB sticks (Total of 24 GB memory installed)
- Kentek 875w power supply
- Geforce GTX 780 Graphics Card
My problem is with the Geforce GTX 780 video card, I installed a fresh install of Windows 7 64 bit and
everything runs and works fine,but when i install the Geforce GTX 780 video card and install the
drivers its all good up to this point but when i restart the computer i get this message in the device
manager ""Windows has stopped this device because it has reported problems (code 43)"
I have installed different versions of the driver, a few older and few newer versions with the same
outcome.
I tried to flash the BIOS to the latest version 10.11 but had problems with it picking up my harddrive
after it flashed successfully. I even checked the boot up setting and it all looked good just would not
boot up, so i had to revert back to the v10.8 BIOS version for it to work.
I'm not sure if there is a setting in the BIOS that i need to turn on or off. I'm not familar with this BIOS,
is there a place in it so i can see if the BIOS is picking up the video card, it has to or Windows would
not see it right?
I'm stumped here, do you guys know of a Geforce driver version that works well with this video card?
I truely think the card is fine because when i install the card to the motherboard i dont get any weird
issues until the driver is installed and Windows is restarted.
I would greatly appreciate any help and advise that you guys can give me.
Thanks alot

UPDATE
Well i wanted to post an update on my new build issue.
Here are my specs:
I bought a MSI Z77A-GD65 motherboard with BIOS v10.8
- Intel Core i7-2600 CPU 3.4 Ghz
- BIOS Version E4451IMS V10.8 (i had a issue with the newest BIOS flash v10.11 it wouldn't detect the harddrive, could figure that one out so i went back to v10.8)
- Balistix Sport 8GB sticks (Total of 32 GB memory installed) I first had 3 sticks so i got another 8GB stick to fill all 4 banks for total of 32 GB
- Corsair Professional Series 860 Watt Digital ATX/EPS Modular 80 PLUS Platinum Power Supply AX860i (Bought this PS to replace the Kentek PS)
- N780 TF 3GD5/OC (GeForce GTX 780 GAMING) (traded Geforce GTX 780 card for the MSI version of the GTX 780 card)
OK... I got the new Corsair 860w power supply installed and i installed the new MSI GTX 780 video card with the specs above everything installed fine no problems and my son was playing the Bio Shock Infinite game on Steam and about 1 hour into the game he got a blue screen of death, says something like "to prevent damage windows is now resetting" and it turns off so fast can't read the rest of the message.
I'm going to here in a little bit and update all device drivers with MSI Live update utility and also update the motherboard BIOS again to v10.11.
I'm really confused here, I'm also going to take out some memory and try to run it with sticks only in slot 2 & 4 to see if it runs more stable like that, also should i update the video card to the latest driver, i know the latest is not always the greatest driver.
I want to think you guys again for your help & time with this issue. I really dont know what else to do here, everything is new in this PC.
Thanks

Having issues with netgear genie and air play with iOS 6

Is anyone having issues with netgear genie and the fact they can not AirPrint with iOS 6. Any solutions for this

The list of AirPrint supported printers is here:
AirPrint Basics
Netgear Genie is not on this supported list so it is probably best to contact Netgear.

Issue with capturing mini-dv video

Hello, im trying to capture video using my 27" iMac, Mid 2010 and i would like to ask a few questions:
1. has anyone encountered issues (capture stop) while capturing video from Mini-dv tapes using a similar to mine iMac?
2. how do you capture video from mini-dv tapes with your iMac?

think you mean import
most people connect the cam to their computer and import into iphoto, imovie or video capture
most people connect it by firewire or usb

[zen x-fi2] issue with transflash music or video playing

Similar Messages

Maybe you are looking for