Zen Xtra 40gb very slow trans

hi all !!
I just get my zen xtra yesterday, i connected and after installing all software updates i copied 7gb of mp3 to the Audio Library, it was slow, but worst was when i turned off and on again and try to see on windows XP explorer what i written to it. It was almost 2 minutes to load !!!!
My pc is P4 3GHZ, gb RAM and a INTEL D865PERL motherboard, of course USB 2.0
Can you help me ?
Thank you
Best regards
Sergio

Shauna Mahana,
Have you try running Cleanup function from the player Rescue mode? It might help with the file transfer.
Jason

Similar Messages

  • My Zen Xtra 40GB mp3 player was dead with no reason

    I bought this mp3 player(Zen Xtra 40GB?last year, it worked brilliant for 3 months, after that, I went back to my country for 3 months, when I came back in Oct, I could only switch it on, and after welcome screen, it pop up an reset back stage list for just half sec, then turn to welcome screen again... I took it inside my house(I was using it as my in-car media center) decide to check it out. after few days, it just went dead. no matter press any bottom, or even charging, there is no signs at all... is there any of you have the same problem before? is there any solutions that I could self-repair it's?I am afraid it has ran out its warranty. Are there any third party resellers that are able?to repair it's or it has to be return to Creative support/repairing depot?also how much is it'sgonna charge me for repairing by Creative??Please help me... I love this Creative mp3 player, don't want it just dead like this!!

    I dont know maybe your hard dri've died, Try if its possible to update the firmware or reformating to see if it fixes. If anything call Creative if you really like your player you can buy another one or get it fized. Sorry sucks to lose a good MP3 player. I also heard that you should have your device on HOLD to prevent damage I really dont understand why but maybe it will halpe you in the future

  • Missing Songs on Nomad Jukebox Zen Xtra - 40GB. Player empty but space not 1

    I have the Nomad Jukebox Zen Xtra 40GB.
    Over the last couple of weeks I?ve been slowly ripping my CDs, using Creative MediaSource and then adding them to my Nomad player. Recently, I went to turn on my player and notice it saying ?rebuilding library?. I thought nothing of it.<SPAN> I then went to see how many songs and albums were on the player and from what I could tell it looked like a lot less than what I thought I had copied over. The songs were something like 3750 and the number of albums was something like 350, which was far less than what I thought it should be but was not 00% for sure.<SPAN> Total free space was something like 7800MB.
    Anyway, yesterday, I tried to copy over some new songs that I had just ripped from CDs.<SPAN> ? of the way through the battery died on the Zen player so it stopped transferring. I went to charge the player and when turned it on the player said ?rebuilding library?. There should, at this point, had been 4500+ songs.<SPAN> I went and tried to copy over the files again, from my computer, and noticed that the songs that I had just copied and would have been skipped, were being copied over again. When I went to check Settings, About the player said I had the ~3750 songs plus the additional songs that had just copied over. At this point I just copied over the new songs bringing my total count to 4634. To be safe, I copied all the songs from my Zen back to a new computer, using Creative MediaSource. After copying over all the files, I then tried a reset of the player, thinking this would delete all the files on the Zen. Instead it did the ?rebuilding library?.<SPAN> When I went back to Settings, About, on the Zen player, it again said there was the ~3750 songs and ~350 albums.<SPAN> So the ?rebuilding library? on my Zen player keeps on removing/hiding my songs and albums.
    Since nothing was working, I connected my Zen to my computer again and using the Creative MediaSource deleted all the songs on my Zen player. When I was done it is showing No. of Tracks: 0.<SPAN> Total Memory:<SPAN> 3833MB.<SPAN> Free Memory though is only 8659MB.
    There is nothing on my Zen player that I can see. Even using Windows Explorer and Nomad Explorer, it is completely blank.
    Someone help please.<SPAN> How do I get back my missing songs and/or reset the player? If at all possible I?d like to get the missing songs off the player since I don?t have those ripped songs on my computer and don?t feel like ripping all those songs again.<SPAN> What is going on?

    PaulS7 wrote:
    Thank you. I'm trying that now. I see that I can reload the OS (Firmware). Does anyone know where I can find out what the latest firmware is to see if I need to upgrade? How do I find out what the latest firmware is and where do I go to upgrade?
    Make sure to read the FAQ post. All downloads are got from Nomadworld.com downloads.

  • Problems downloading between Nomad Zen Xtra 40GB and PC (XP S

    Help please
    I've a new Zen Xtra and have installed all the software that came with it and then reinstalled as per the instructions given in another post.
    I can see no sign of the drivers under the device driver although, not always, the PC pops up a message saying 'do i want to organise'. I can see my Nomad files in Nomad Explorer and Windows Explorer. i can even, sometimes, after each software reinstallation, even transfer a few, about 0 to 20, files before i get an error message telling me thw player is busy or disconnected. I have left the connection in place overnight but still no celarance.
    Any ideas as I really feel like throwing the bloody thing out the window!
    Thanks
    Mark

    Guys
    Thanks for your responses. Sorry I haven't got back - been away a few days.
    Situation is this.
    new Nomad Zen Extra and Dell 3000 running XP SP2 52mb ram 40gb dri've.
    Loaded software with Nomad and unable to sync or transfer. PC could 'see' nomad and read preloaded files but when any form of transfer tried I either got 'device not connected' or, occasionally, a few files would transfer before 'hanging'. Erroe message stated'device busy or not connected'.
    Since then I have followed these instructions given in another reply on this forum to the letter.
    <SPAN>Here is a step by step of what I would do to try to get back to square one and get MediaSource and the Driver installed.
    <SPAN>
    <SPAN>) Disable any antivirus and background programs on your system and disconnect the Jukebox from USB
    <SPAN>2) Go to control panel/add remove programs and remove both Mediasource and the Jukebox Driver
    <SPAN>3) Reboot
    <SPAN>4) Ensure AV and BG programs are still disabled
    <SPAN>5) Search for any updated Chipset drivers for your motherboard (if you need help with this tell me your computer Mft. or your motherboard mft. and I will find out what you will need) and install them.
    <SPAN>6) Reboot
    <SPAN>7) Repeat step 5
    <SPAN>8) Go to www.nomadworld.com and go to downloads/drivers and applications. Select the Jukebox Zen USB 2.0 and your version of Windows. Click get files. Download four files:
    <SPAN>Jukebox Driver version .26.02<SPAN></LI>
    <SPAN>Creative MediaSource Software Update version 2.03.29<SPAN></LI>
    <SPAN>NOMAD JukeBox Type 2 Version .0.03 (English) Web Release<SPAN></LI>
    <SPAN>Creative NOMAD Explorer (Version 3.0.0)<SPAN></LI>
    <SPAN>9) While these are downloading, go into rescue mode on the player and run a cleanup. A reload OS will hopefully not be needed.
    <SPAN>0) Install the files in the above order. You will plug the Jukebox Zen in at the end of the driver install to complete the install. Leave it connected all the way through the remaining ste
    ps.
    Disconnect after the last file is installed.
    <SPAN>0) Reboot, reconnect the player and test.
    <SPAN>Jeremy"
    <SPAN>So I think of all the up-to-date firmware etc...
    <SPAN>I've also loaded and installed WMP 0 - which can also see the Nomad and has transferred a few files before hanging as above...
    <SPAN>I can also see the driver in my device drivers under usb controllers. the driver listed is Creative Labs .26.2.0
    <SPAN>I have managed to transfer my tracks (3500+) to the Nomad by burning as MP3 cd's and loading through my works laptop (Win2000). I used the Creative Media Source on the original software which came with the Nomad to do this. This is not a great solution as my company aren't thrilled about such use of their lappies and it only has a 0gb hd and, therefore, doesn't / can't hold my music library.
    <SPAN>I really want to get it working properly on my main PC so I can get the max from the Nomad.
    <SPAN>Any ideas?
    <SPAN>Sorry this is a bit long...
    <SPAN>Mark
    <SPAN>
    <SPAN>
    <SPAN>
    <SPAN>
    <SPAN>

  • Zen Xtra 40gb probl

    I have a 40gb zen xtra and when its charged or plugged into the charger and it trys to come on,the creative logo screen will flash up and then the EAX screen will come up then the players screen just goes off and repeats the process until the battery is dead or i unplug it. Anyone know how to fix this problem so i can use my mp3 player?

    Shauna Mahana,
    Have you try running Cleanup function from the player Rescue mode? It might help with the file transfer.
    Jason

  • Zen Xtra 30 GB: slow since firmware upgr

    I own a Zen Xtra 30 GB MP3 player, and right off the bat, I admit I upgraded the ifrmware without removing the old firmware.
    Ever since doing this, my player has been slow on connecting via USB. I rebooted into rescue mode, removed the OS, and reinstalled the latest firmware upgrade (.20.08 I believe).
    My Zen Xtra still takes forever to connect via USB, and that's even if it does connect at all.
    Any ideas where I should go on this one...

    dc08 wrote:No thanks to anyone on here trying to help me out or anything...
    Do you realize that we don't actually work for Creative and, therefore, don't owe you anything?
    If you get help then you should see it as a bonus and be grateful - not expect help and moan when you don't get it.
    I had the same problem on my Open Uni'versity forum in the UK - other students expected help from everybody else on the course and then gave us a slagging when we didn't give it!
    I'll now duck back under my stone and wait for the incomings....
    PB

  • Audible file starts at beginning when Zen XTRA 40gb is not powered on after about 24

    I don't know if this is the case for everyone, but my Zen XTRA, if it is not powered on for more than 24 hours, it seems the memory is reset and does a cold boot from the Creative logo screen, and when I play my Audible file, instead of playing from where it left off before the power off, it plays from the beginning. If I don't bookmark before I power off, and don't use my player for over 24hours, I have to manually forward to where I last left off in my audible program.
    It's kind of an annoyance. I wonder if it's only my player, or if other players are having the same problem.
    Deli'verator

    Just so you know, I have the same problem with my Zen Xtra and found your post looking for a solution. Yes, it's a pain, and I wish I had an answer. If you find a fix (the bookmark workaround seems reasonable in the short term), please post it here. I'll do the same. Good luck.

  • My Zen Xtra 40gb stopped on me any help thank

    I have the Zen Xtra it feel yesterday (02-7-05) then it was playing fine till today (02-7-05) where it completely froze on me. I have tried the clean up, the format, the rebot of the OS, and the normal rebot. my computer regonizes it but thats about it. I can not get my music files or my data files either. Thank you for your time.

    Can you check with a different PC?

  • Zen Xtra 40GB w/MTP firmware stuck at start up screen displaying EAX, can't get into resure m

    Help!?My Zen Xtra 40 GB freezed when I was deleting a track with the player and I have to unplug the power supply. Then this player stucks in startup screen which displays EAX afterwards. I tried to enter rescure mode followed the instruction, i.e., power off, hold play/pause, press reset with paper clip, but nothing happened. What did I do wrong or what else should I do before I dissamble it and test/replace the hard dri've? Advice is appreciated.Message Edited by hotelcalfornia on 02-4-200609:34 AM

    I managed to get the hard dri've out and ran a test with my pc and it turned out that it's OK. Without the hard disk, the player has the same problem, i.e., freezes at the EAX screen. I tried to update a firmware, but the player wont be recognized by the windows. Help, please!

  • Creative Zen Xtra 40gb locked in Rescue M

    I am having trouble with my Zen Xtra. When I turn it on it goes into recovery mode and I can't get it out. I have tried a reboot and a cleanup, but they are not working. I have also tried a reload but when I select any of the option they don't actually do anything. I can charge the player when I plug it to the main power, and have tried taking out the battery for a ew hours and replacing it. This is not working as every time I turn the player on it goes straight back to rescue mode.
    Can anybody help?

    All you can do is run through the advice in the section "My Zen is not behaving properly, won't startup, or goes into rescue mode. What should I do?" of the FAQ. If functions in rescue mode don't work then the player is faulty unfortunately, and you need to contact support.

  • Zen Xtra 40GB won't charge or turn

    I have a problem with my player that nothing seems to sort out. I'm getting really annoyed with it and need some advice before I start throwing it at walls!
    Basically, it won't turn on. I've held the power button down til my finger nearly falls off but it won't turn on. Just stays blank. I figured that was probably because the battery wasn't charged, so I tried to do so - I've hooked it up to the charger, and the charger to the socket (checking I'm using all the right cables and stuff) but although this *does* turn the player on, it doesn't charge it. I just get the main menu, and if I leave it, it just turns itself off automatically after a few minutes. I don't get the 'charging' symbol, just the one that means it's running on mains electricity only.
    I have tried:
    ) Pressing reset
    2) Following some advice I saw on here further down about keeping on plugging it in and out until it kicks in charging
    3) Plugging it into a different socket
    4) Swearing at it
    None of these have helped and I can't find any further help topics. Can anyone think of anything more I can do, or should I take it back to the shop? I don't want to get there only for them to point out that I've missed something really easy!
    I also don't know if this is relevent but I should probably add that I have had the player for a year already, but haven't been able to use it because at the time I got it as a present but my computer wasn't upgraded enough to actually use it! So I've had to wait until now to get the thing going - but it has been kept very safe, in its box and hasn't suffered any trauma or anything. It did turn on when I first got it, though, which makes me a little worried - I haven't turned it on for about 0 months... but surely I can't have damaged it simply by not using it's
    If anyone can think of an answer, please let me know - I'll be very grateful!
    Ems
    xx

    It's the last piece of the story that I think is the key. You say the player hasn't been used for a long time, and this can be fatal for a Lithium Ion battery. Basically if left in storage the battery will eventually discharge to a point beyond which it can't be recovered. You can try the technique of manually jump starting it, by applying voltage, described here in the Zen FAQ at Nomadness.net. No guarantee it will work though, and you do this at your OWN RISK.

  • Creative Zen Xtra 40GB - BATTERY NOT RECOGNIZED BY PLAY

    I just received a brand new 40GB Xtra that absolutely will not recognize that a battery is installed; I see only the AC line icon at all times. I've read through many related threads; did a Disk Cleanup, turned the power-strip that the transformer is plugged into on and off several times, R&R the battery many times. cleaned the contacts, etc..., and cannot resolve the problem.
    My first email response from Creative regarding the matter directed me to update the Firmware. Guess what... can't update the firmaware until the device recognizes that a battery is installed. Pretty certain they never shipped firmware that wouldn't at least let the device see the battery, let alone charge it accurately, anyway.
    Waiting for the next round of emails from Creative now, but wondering if anyone here had anything else.
    Thanks!

    Yes, it did seem like it was just the battery, but Creative is now talking about RMA'ing the entire unit. I did suggest that they might send me a battery to try first.
    Thanks for your input!

  • Nomad Jukebox Zen Xtra 40GB Iss

    Yesterday I tried to turn on my player and the "Rescue Mode" menu appeared. This is the first time I've seen the menu. I did the usual "disconnent the power supply and hope it works" deal. That didn't work. So now I'm confused. So next I try, "Clean Up" and nothing. Then "Reload OS". It then says "Hardri've Problem", same for "Format All". I clicked "Reboot" and it rebooted but only to take me back to the "Rescue Mode" screen.
    Is there anything I can do to fix it's I'll be ok with losing all my music, I just want my MP3 player back.
    Or had it played it's last song and retired?

    You can try the advice here in the Zen FAQ at Nomadness.net at your OWN RISK. If you don't want to try this or are under warranty then contact Creative Support.
    If you aren't under warranty you can contact Creative Support to see if they will repair it. If you want to try repairing it yourself, taking the risk the hard disk is at fault, then you can follow Rudi Cheow's excellent guide. There's also a thread here at the Zen Nomadness.net forum on compatible dri'ves, and the last page of Rudi's guide also has information on this.

  • Nomad Zen Xtra 40gb Hiss prob

    Hey all
    Recently I noticed that the player produces some sort of background hiss. When the screen lights up there is no hiss at all but when the background lighting stops the hiss turns up. When I connect the USB Cable to the computer the hiss also sto
    ps.
    When I connect the power cable to the player the hiss also appears to be gone.
    The 'hiss' is infact some creaking, very strange sound.
    Can somebody tell me how to get rid of this problem? It's quite unpleaseant, especially when you're listening to e.g. a piano sonata.
    Thank you and kind regards
    Danny

    Hi Danny!
    That's the Background Hiss Noise which you can hear, when the Battery isn't fully charged and the Backlight Display is off. If the Backlight Display is on or you hear with the Power Adaptor or a fully charged Battery the Background Hiss isn't audible.
    http://forums.creative.com/creativelabs/board/message?board.id=dap&message.id=30526&query.id=270 962#M30526
    Try to RMA your Unit at Creative or the Store in which you bought it. I'll send mine back tomorrow and hope that the new one will be ok.
    cya
    John

  • Nomad Zen Xtra 40GB - Max Bitra

    Hi - as a matter of course, I tend to record my music at a maximum bitrate - typically WMA Lossless. I tried to find it, but I couldn't - what is the max bitrate the Xtra can handle? When I transfer these files, I get a "playback error".
    Also note, unlike Windows Media Player, the Creative Media Organizer does not apparently automatically downshift the bitrates when tranferred to the player. Anyone know of a work around or utility (other than Windows Media Player) than can handle this?
    Thanks,
    - Snacko

    Snacko wrote:
    There appear to be issues between how WMP and CMSO display bitrates - the same song in each do not agree with regards to bitrate numbers, so numbers between the two may be off as much as 200-300k. I think this is because when WMP rounds up to display the bitrate, it uses the 024 rule, so k bitrate is actually 024 bitrate, and CMSO just displays full bitrate with no "k" placeholder.
    Bit-rates have often proven to be a problem, in terms of accurate display, and particularly with VBR files. You can use something like VBRFix to double check the file.
    Also as I have discovered, WMP morphs MP3 files into WMA file automatically, and I can't find an option to turn that off. I don't really care about this (my chosed format for new recordings is WMA), but the file sizes are differing after conversion, which may account for files around the 256k threshold working or not working.
    Somewhere in the sync settings, if memory serves, there's an option to disable this. It's WMP trying to be helpful, but like a lot of Microsoft features it shouldn't be enabled by default.
    I looked into Notmad - it looks to be nice. But like many things worthwhile, it's cost $$$.
    Yep, it's shareware unfortunately. Good program though, and there's a free limited feature trial to check it over.

Maybe you are looking for

  • Video Phone only works when specific user initiates connection

    Hi, I have an application based on the Cirrus Video phone demo as presented here: http://labs.adobe.com/technologies/cirrus/samples/ In general, this works fine, but for one specific user with whom I test, I have the following issue: When I initate t

  • Score Editor: best key commands for attaching symbols?

    Does anyone have suggestions for the best keys or a logical system of what Key Commands to use for attaching Score symbols.. especially these below? [IMG]http://i364.photobucket.com/albums/oo82/dogliege/ScoreEditorKC.jpg[/IMG]

  • Access laptop internet through bluetooth ?and...

    I have a laptop which has a datacard on another network cause the area im in doesnt have att coverage for my iphone. what i would like to know is if its possible to connect my iphone to use my laptops datacard internet through a bluetooth connection

  • Best Way to Speed Up Output/Export

    Hello, I am trying to increase my AE use in my video business and am trying to come to grips with rendering, output and one computer. I use Edius as my editor and have an XP machine with a quad 9450 processor with 2.75 ram and shooting in HD. My main

  • TOPLINK-60 when weaving activated

    Hello, environment: TL-essentials, jdk 1.5.08, windows xp SP2 i get the following error: (seems to be a problem with the valueholder....) Exception [TOPLINK-60] (Oracle TopLink Essentials - 2006.7 (Build 060720)): oracle.toplink.essentials.exceptions