Zen Xtra 60 GB problems!!!! System freezes after plug in the USB 2.0 p

I've got a Microstar MS-6585 mainboard... Pretty much **bleep**ed up, I consider throwing my pc mach 3 turbo out of the window...

If the system's locking this suggests a serious USB issue.
Firstly, if you can, try the player on another PC. Do you get the same problem?
If the PC and player are fine then I would save yourself lots of hassle and just get a known good PCI USB2 card i.e. Adaptec. Make sure you can get it somewhere you can return it, just in case it doesn't help.

Similar Messages

  • [SOLVED] System freeze after upgrade linux-3.12.9-2 to linux-3.13.4-1

    After upgrading from kernel 3.12.9 to 3.13.4 (booth x86_64 architecture) i detected system freeze after round about 0.5s of the login screen about 80% of the time.
    So i first thought it coulbe be the the ati driver and uninstalled that via livecd/chroot.
    But the same thing happens in comand line only mode.
    Afterwards i setup at ssh server to get into the maschine if it is still running, but is was also not responding to that.
    Downgrading to 3.12.9 solved the issue. In journalctl i could not find any usefull information.
    Last edited by schlumpfimsumpf (2014-04-10 19:16:57)

    Me wrote:
    It is same for me. Wont boot, and crash before I can write mine pass to text screen. I use lts at now.
    H/W path Device Class Description
    ===============================================
    system GA-970A-UD3
    /0 bus GA-970A-UD3
    /0/0 memory 128KiB BIOS
    /0/4 processor Athlon
    /0/4/a memory 128KiB L1 cache
    /0/4/c memory 2MiB L3 cache
    /0/b memory 128KiB L1 cache
    /0/29 memory 8GiB System Memory
    /0/29/0 memory DIMM 1600 MHz (0,6 ns) [empty]
    /0/29/1 memory DIMM 1600 MHz (0,6 ns) [empty]
    /0/29/2 memory 4GiB DIMM 1600 MHz (0,6 ns)
    /0/29/3 memory 4GiB DIMM 1600 MHz (0,6 ns)
    /0/100 bridge RD890 PCI to PCI bridge (external gfx0 port B)
    /0/100/0.2 generic RD990 I/O Memory Management Unit (IOMMU)
    /0/100/2 bridge RD890 PCI to PCI bridge (PCI express gpp port B)
    /0/100/2/0 display GF106 [GeForce GTS 450]
    /0/100/2/0.1 multimedia GF106 High Definition Audio Controller
    /0/100/4 bridge RD890 PCI to PCI bridge (PCI express gpp port D)
    /0/100/4/0 bus EJ168 USB 3.0 Host Controller
    /0/100/4/0/0 usb3 bus xHCI Host Controller
    /0/100/4/0/0/2 storage ADATA USB Flash Drive
    /0/100/4/0/1 usb2 bus xHCI Host Controller
    /0/100/9 bridge RD890 PCI to PCI bridge (PCI express gpp port H)
    /0/100/9/0 eth0 network RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
    /0/100/a bridge RD890 PCI to PCI bridge (external gfx1 port A)
    /0/100/a/0 bus EJ168 USB 3.0 Host Controller
    /0/100/a/0/0 usb8 bus xHCI Host Controller
    /0/100/a/0/1 usb7 bus xHCI Host Controller
    /0/100/11 storage SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode]
    /0/100/12 bus SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
    /0/100/12/1 usb6 bus OHCI Host Controller
    /0/100/12/1/5 input M Dongle
    /0/100/12.2 bus SB7x0/SB8x0/SB9x0 USB EHCI Controller
    /0/100/12.2/1 usb1 bus EHCI Host Controller
    /0/100/13 bus SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
    /0/100/13/1 usb9 bus OHCI Host Controller
    /0/100/13/1/1 input USB Receiver
    /0/100/13.2 bus SB7x0/SB8x0/SB9x0 USB EHCI Controller
    /0/100/13.2/1 usb4 bus EHCI Host Controller
    /0/100/14 bus SBx00 SMBus Controller
    /0/100/14.2 multimedia SBx00 Azalia (Intel HDA)
    /0/100/14.3 bridge SB7x0/SB8x0/SB9x0 LPC host controller
    /0/100/14.4 bridge SBx00 PCI to PCI Bridge
    /0/100/14.4/7 multimedia SAA7134/SAA7135HL Video Broadcast Decoder
    /0/100/14.4/e bus VT6306/7/8 [Fire II(M)] IEEE 1394 OHCI Controller
    /0/100/14.5 bus SB7x0/SB8x0/SB9x0 USB OHCI2 Controller
    /0/100/14.5/1 usb10 bus OHCI Host Controller
    /0/100/15 bridge SB700/SB800/SB900 PCI to PCI bridge (PCIE port 0)
    /0/100/16 bus SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
    /0/100/16/1 usb11 bus OHCI Host Controller
    /0/100/16/1/3 multimedia USB Web Camera
    /0/100/16/1/4 multimedia USB Sound Device
    /0/100/16.2 bus SB7x0/SB8x0/SB9x0 USB EHCI Controller
    /0/100/16.2/1 usb5 bus EHCI Host Controller
    /0/101 bridge Family 15h Processor Function 0
    /0/102 bridge Family 15h Processor Function 1
    /0/103 bridge Family 15h Processor Function 2
    /0/104 bridge Family 15h Processor Function 3
    /0/105 bridge Family 15h Processor Function 4
    /0/106 bridge Family 15h Processor Function 5
    /1 scsi6 storage
    Working again. I think problem was the partition was full.
    Last edited by gyurman (2014-04-13 07:51:22)

  • System freezed after "startx"

    Hello,
    after updating with "pacman -Syu" my system freezes after boot-process at the loginscreen.
    To be more exact: When X starts, all my input-devices doesn't react anymore. Even new plugged-in keyboards doesn't do something.
    Numlock doesn't change lights on my keyboard.
    As far as i know pacman shows me while updating a message about udev.
    Pacman has updated udev, kernel26 and some other packages.
    In GRUB I've appended "single" to get a terminal after booting and before X starts.
    I've tried to reset X by replacing xorg.conf with xorg.conf.backup, but no effect.
    Everytime I enter "startx" in the terminal, I can see some white textboxes, but can't move my mouse or enter anything with my keyboard.
    Hardreset is the only thing, that helps.
    So anybody know what to do in this situation or has any tips for me?
    I would appreciate it if somebody can help me... thanks in advance!

    Yes, I have a .xinitrc in my $HOME.
    I've tried several things and found out, that not X is the problem alone.
    It's more the udev update, which doesn't recognize my hardware anymore.
    When I type in startx in tty, X now starts with my KDE, where I could see, that stuff is loading (so it's not freezed).
    But KDE alerts me, that some audio hardware were removed and even in tty i couldn't mount my usb harddrive or start my notebook-wlan.
    So I came to the conclusion, that only my hardware were not recognized..
    Is there a way to get udev recognize my hardware again? I've even downgraded udev and kernel26 to versions, which worked properly..., but that doesn't help.
    hope you can help.. =/

  • System freezes after installation of version 11.5.502.149

    WindowsXp, Firefox, Flash player 11.5.502.149 - I have made 2 attempts to load latest version; both times when I have restarted my system Windows will only load to Wallpaper and then stops- I waited for atleast 30 minutes - no program icons, no taskbar etc,  Have used safe mode to uninstall flash player, did registry fix, have used system restore, still will not load. Did chkdsk - no apparent disk problems - but then after attempting to restart several times after long wait finally loaded. System will now restart, but as this happened after installation of flash player 2x I am unwilling to retry. - and now can not reload older version of flashplayer.   - have recently installed other program updates and have not had system freeze so do not think it is a general installation problem. Any ideas? 
    Thanks

    Pat
    Trying to install an older version I got a message something to the effect that a newer version is available and program does not install. By hunting around the support areas on Adobe I did find a page that noted that if for some reason the new version did not work an older version was archived and a link.. so I did find an older version that would load.. of course I had to find a Zip program to unzip the file and it did try the same message ... there were 2 unzipped versions - only one worked but I do now have a working version albeit of Flash Player.
    I googled for WindowsXp freezing and found a number of bulletin boards/forums that discussed solutions - which were pretty much what I did. Typically it happened after installing a new or updated program. No reasons were mentioned as to why or what was happening and the solutions of starting in safe mode, uninstalling, restoring, chkdsk are all sort of hit and miss... if one doesn't work try another... with the final solution being reload windows.. of course my version came installed and I don't have a backup disk so I imagine that would be another day or two of  total frustration... so I guess I will avoid trying to update the flash player as long as possible.  I have my system set up to only allow updates I have confirmed.
    Thanks for your prompt response.
    Janet Forbes
    Quoting Pat Willener <[email protected]>:
    Pat Willener http://forums.adobe.com/people/pwillener created the
    discussion
    "Re: system freezes after installation of version 11.5.502.149"
    To view the discussion, visit:
    http://forums.adobe.com/message/5057581#5057581

  • T400 downgraded from Vista to XP resulting in system freeze after 10 min activity

    Hi,
    I just purchased a T400 and have gone through the process of (re)grading the OS from Vista Business to XP. From the moment the setup dialogue for XP started (machine name, date, users etc), the whole systems freezes after working the machine for around 10-15 min. First, I suspected it to be a mouse freeze, but I get no reponse from neither the keyboard nor mouse (not sure if it is a complete system freeze or to do with mouse/keyboard drivers). Even the clock in the bottom right corner stops running.
    To get the system going I need to force the system to reboot using the power on/off button.
    The XP restore disc I used came from Lenovo with the computer, and I have followed the instructions by point. Do any of you recognize this problem? And more importantly, know how to deal with it
    Message Edited by Missmostly on 10-16-2008 06:28 AM
    Message Edited by Missmostly on 10-16-2008 08:56 AM

    Hi,
    I posted a message on the forum 5 days ago, and got no replies.  I agree the  problem description might be a bit vague, so here we  go again:
    I recently purchased a T400 (model 2765, 21g) with the XP downgrade option (the MS Windows XP Conversion Kit containing 2 CD's: Lenovo's Rescue &  Recovery plate + XP product recovery plate with SP2). During the installation of XP (the end part where you set up your user) the computer freezes (no response from keyboard). I power the machine off and on again, and the installation continues as it were. I finish the installation and the computer is set. After additional 10 min the computer freezes again in the same style.
    I imagine it to be a powermanagement disagreement between MS system and Lenovos powermanagement system, and set every parameter to be always ON and full performance ( I am running on AC). This time the freeze doesn't happen for an hour. I then begin to reinstall the powermanagement drivers and the general drivers for this particular model running XP (from Lenovos drivers Matrix), and now I am looking at two hour before each freeze. That is if I don't plug in any external hard drives (then the system can crash within 15 min or an hour), and we turn a blind eye to the occational freeze after 10 min on the first boot of the day .
    At some point I suspected there to be a conflict with the existing SATA drivers that I also have reinstalled for the occation.  Still the system is NOT stable.
    And the frustrating thing is that I have no clue why. The sympthom is always the same, complete screen freeze ( I do not know if the system is active behind (no hard drive running)), that can only be cured with a forced boot.
    If any of you reconize this, please assist me to a solution. I have by now installed all programs to my liking including all MS updates (SP3 etc), and hope there is a way to get to the core without a complete reinstall (or worse, return to the realm of Vista) 

  • System freezes after connecting usb harddrive for a while

    I do not know when this actually started, but it has been more than one month since the first time I realized it.
    It works nicely when I connect my usb hard drive, but after approximately 10 minutes (or maybe 5 minutes), or after I have done something (copy/read some data), the whole system just freezes, and I can do nothing except reboot with the power button.
    In the meantime, using usb mouth/keyboards and webcams are perfectly fine.
    What is the problem and how can I fix it? I do not want to test it too often as it may destroy the data...
    Last edited by sfbi (2011-01-17 00:29:26)

    scarecrow wrote:Do you use udev 165-1?
    So, you mean that this is the same problem regarding udev as other threads have been talking about?
    I went through some posts, and they were talking about intermittent boot failure. But for me, boot is always fine. More precisely, there is no problem at all as long as the usb hard drive is not connected...

  • Hi, I have a problem with my ipad, I want to restore it but I can not. When I plug the ipad (off) it is not recognized by itunes, I turn the ipad, There are apple and the apple after you see the usb cable and itunes logo for just 1 minute and turns off an

    Hi, I have a problem with my ipad, I want to restore it but I can not. When I plug the ipad (off) it is not recognized by itunes, I turn the ipad, There are apple and the apple after you see the usb cable and itunes logo for just 1 minute and turns off and is no longer recognized by itunes.
    thank you for your help.

    Hi there beni_m,
    You may find the troubleshooting steps in the articles below helpful.
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/ts3281
    iOS: Device not recognized in iTunes for Mac OS X
    http://support.apple.com/kb/ts1591
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/ts1538
    -Griff W. 

  • I have an optical mouse that came with my Mac Pro plugged into the USB port on the keyboard. After a year of working normally, the trackball all of a sudden stopped scrolling down. It scrolls up just fine, but not down. Any thoughts?

    I have an optical mouse that came with my Mac Pro, the only thing plugged into the USB port on the keyboard. After a year of working normally, the trackball all of a sudden stopped scrolling down. It scrolls up just fine, but not down. Any thoughts?

    Well
    I tried all of the suggestions, sort of. I did not have alcohol wipes, but I did take alcohol and pour some ona white paper towel and then rolled the mouse touch ball aroound and that finally cleared up the problem.  Just inverting it on paper did not do the reick, it needed some help with the alcohol.  Of course the probelm is the debris that gets inside and it really needs to come out.
    This is a huge problem for RIM devices users too.

  • I have a Sony radio in my car.   With IOS  4 on my IPhone I could use the docking plug to the usb input on the radio and stream ESPN radio or pandora to the radio.  After upgrading to IOS 5 on the phone the Sony radio will not recognize the phone .  Any t

    I have a Sony radio in my car.   With IOS  4 on my IPhone I could use the docking plug to the usb input on the radio and stream ESPN radio or pandora to the radio.  After upgrading to IOS 5 on the phone the Sony radio will not recognize the phone .  Any thoughts.

    I am reading on this site about the error I am getting and it wants me to change some files that I am not comfortable messing with. Mainly because it is like a foreign language. Will the store do this for me or tell me if it is neccessary?

  • My Apple iPod Nano stops playing shortly after plugging in the correct headset, but works on docking station. I've tried enabling and disabling crossfade in settings. Any suggestions?

    My apple ipod Nano stops playing shortly after plugging in the correct headset. I've tried enabling and disabling crossfade in settings. Any suggestions?

    Make sure your headphones are plugged ALL the way in, meaning the white part of the headphones is flush with the Nano and you cannot see any silver from the plug still showing.
    B-rock

  • After ejecting a disk plugged into the USB port using Finder, I am now getting "The disk was not properly ejected" message.  This didn't used to happen.  How can this be corrected?

    After ejecting a disk plugged into the USB port using Finder, I am now getting "The disk was not properly ejected" message.  This didn't used to happen.  How can this be corrected?

    When you right (control) click on the disk and click eject "disk name", do you pull it immeadiatly or wait a few seconds for it to unmount? Try waiting and see if you get the same message. If you do, when the disk is connected go to applications/utilities/disk utility, after opening DU, select the volume in question from the left side bar and try a permissions repair, you may also run verify disk and see if it comes up with any errors (they will be in red)

  • Creative Zen Touch. At what point does it charge via the USB cab

    Hello,
    I've had a Creative Zen Juke box for a couple of weeks now. I need to give it a charge but I don't have my power cable to hand. I do however have my USB sync cable.
    So apparently I can charge the device from the USB port.
    So I've plugged it in and Then it syncs. But while the player is "on" it doesn't charge. So I shut it down but it won't let me as the screen shows as docked.
    So I unplug the USB cable to release the dock and plug it back in and it docks so it won't charge.
    I'm going round in circles at the moment.
    How can I charge my player through the usb cable? Without it docking?
    Thanks
    Chris

    Thanks for the quick reply.
    I've tried locking it and that doesn't do any good. Hmmmm.
    Basically If I turn off the player and then plug in the USB cable connected to the PC, the player turns itself on and starts docking at which point I cannot turn it off.
    Its swings and round abouts. I can't seem to keep the thing turned off when its connected. I managed to keep it off for about 5 minutes earlier and the icon appeared showing it was charging. But all on its own it started up and started to dock, without me doing anything.
    I have since reset the player and will have stern words for it if this bad behaviour continues.
    Cheers
    Chris

  • Zen Xtra New Firmware Problems, Cannot install New Creative Software Suite after upgr

    Hi?As with a previous post?http://forums.creative.com/creativel...essage.id=3535?I am having difficulty getting my Zen Xtra to bee seen by anything but Windows Media Player 0.. I have updated the firmware to the latest version, "reati've Zen and Jukebox Driver Upgrade version .30.03"?updatd the Device Dei'vers and rebooted?have XP sp 2?have updated and installed the Creative MediaSource Player/Organizer 3.30.2, software?but the "Creative Software Suite for PlaysForSure-enabled Zen Xtra Players" file?"[size="2" color="#3300ff">ZENZ_PCAPP_LB__40_03_MTP.exe" [color="#000000"]is not loading.. [size="2" color="#3300ff">[color="#000000"]?[size="2" color="#3300ff">[color="#000000"]When trying to install I see the Zen flash and the connected icon on the Zen flickers but then goes off and the install says "unable to find device"?I have unloaded and reloaded everything over and over.. even reset the OS on the Zen...?so the only thing that can load to my Zen is WMP 0.. which is not what I want...?please advise??Message Edited by grommit on 02-25-200606:26 PM
    Message Edited by grommit on 02-25-200606:32 PM

    I hope you are still here Grommit.
    The reason why the new Creative Software Suite will not install is because the firmware you have is not the version the suite is looking for.
    If you want to install the new Suite, you will have to update to the PlaysForSure firmware (2.0.03, I believe). However, if you do this, be aware that you will also have to download and install the latest Zen Driver, Creative MediaSource, and Zen Plugin for the MediaSource (all available in the download section) - also, once you start the firmware update on the Zen Xtra, you WILL NOT be able to revert back to a previous version of the firmware, and the drivers and programs on the install CD will not function with the new player at all.
    Unless you use a subscription service with DRM mp3s, or have had issues with Playback Errors in certain mp3s, there is very little immediate need to upgrade.
    Cheers,
    ShinjiT

  • Creative Zen Xtra Firmware Upgrade Problems v1

    While trying to upgrade the firmware on my Creative Nomad Jukebox Zen Xtra, there was a problem with the upgrade. I'm now stuck in rescue mode v.3. When I plug the MP3 player into the computer, Windows will recognize it and asks me what to do. I exit that window and try to run the firmware update again. The firmware program tells me "Your player is not connected, please connect your player."? there are 2 options "Upgrade" and "close". Upgrade is greyed out, but close is clickable. I've tried
    1. clean up,
    2. format all,
    3. reload OS and
    4. Reboot.
    None of those options seems to do me any good. I've uninstalled all the Creative software from my computer, but still no luck. Please help me. I'm doing my best to avoid having to go buy an iPod, but if I can't get my Creative Mp3 player to work, I guess I will have to. I have spent a lot of money between cables, the docking station and the leather case. I'd hate for all this to be wasted, so please help me.
    I've tried to "reload the OS" and then clicked on the language the moment the Player told me to start the update. Someone please shed some light on this for me. I've tried email Customer Support. I've searched Google. I've put my best skills on it and of course I've scoured this website to no prevail. Someone help me out.

    READ ALL BEFORE PROCEEDING You do need to install the driver. http://support.creative.com/Products...e=MP3+Players# When you get to the page for your player bottom left the manual selection choose Xp & clik submit the driver should be the first one version 2.0.00 .After the driver is installed when you plug in the player check in device manager to see that it shows up there Start>Control Panel> System>Hardware>Device Manager look under Portable Devices or for the name of the player. Use a rear USB Port to assure a good connection. Then run the firmware file on the computer ,choose reload firmware or Os on the player,choose language when player asks for update(the pop-up from windows indicating that it "sees" the device DO NOT CLOSE IT.)

  • Zen Xtra 40G - PC Not Recognizing Unit after Firmware and Driver upgrade

    I own a Zen Xtra 40G unit and have just recently upgraded the firmware to the latest version (.20.08). I then proceeded to upgrade to the latest Windows XP driver (.26.02) and after reboot, the system no longer recognized my jukebox.
    I tried my room mates, still on an older version of the firmware, and his worked without a problem.
    In order to check and see if it was a one time fluke, I uninstalled both the driver and Creative MediaSource and re-installed from the original CD.
    Again, my jukebox (still with the new firmware) worked flawlessly. I then upgraded Media Source to the latest version (2.03.09) and rebooted only to find my jukebox still worked perfectly.
    I then downloaded and installed the latest Windows driver again (.26.02) and rebooted. My PC stopped recognizing my jukebox again but my buddie's still worked without a problem.
    Is there a known flaw with the Windows driver and the latest firmware version.
    Could Creative fix the problem or let me know if there is a setting I need to change in order for my PC to recognize my jukebox under the latest software and drivers?

    So am I to assume from that message you think I should revert back to the old driver?
    Of course Technical Support was no help. Sometimes I think they either a) don't read English very well or b) don't read the entire e-mail.
    Here's what they wrote:
    <EM>With regards to the issue you are having, may I enquire on the programwhich you used after applying the Windows update that informed you thatthe player is not connected. In the meantime, please try downloading these two files and see if ithelps:Below is the link for the latest drivers/applications updates.</EM><A href="]<EM>http://us.creative.com/support/downloads/</EM>[/url]<EM>Select MP3 Players -> Zen -> Zen XtraSelect Windows XPThe files are Creative MediaSource Software Update version 2.03.29 (39.46 MB)Filename: CMS_PCAPP_LB_2_03_29.exeThis software update allows you to manage your Creative NOMAD? playerwith the latest version of Creative MediaSource?, an advancedfull-featured media player.2) NOMAD JukeBox Type 2 Version .0.03 (English) Web Release (7.70 MB)Filename: JBTII_PCAPP_LB__0_03.exeThis software update is for Creative Zen and Creative NOMAD? Jukeboxowners who have installed Creative MediaSource? (version .00.54 orlater) on their computers.Please email us if you have any further questions or comments. Thankyou.For faster service please reply with previous correspondence whenreplying to this email.</EM>
    Had they read my e-mail, they wouldn't have pointed my to software I had already DOWNLOADED and INSTALLED!!! Oh well... we'll see what tomorrow's answer brings.

Maybe you are looking for