Zenautil.dll (TID not working)

I found a TID (10076950) on where the system path to C:\Program
Files\Novell\ZENworks would have been deleted when receiving this error :
Unable to load zenautil.dll
Well that variable is in the user's path, and this is putting a crank in my
remote mgmt. Only change, installed the patch mgmt update agent on it. Any
ideas?
Running NW 6.5 sp2, with ZfD4 IR5 on Windows XP pro.
Thanks in advance,
Jeremy

> If you can start "wmsched" from the Start -> Run option the path
> variable works.
> If you reinstall the zen agent, does that work ?
Actually, the path was there, and now she doesn't have that problem. I'll
try your input in future cases. Thanks a lot!
Jeremy

Similar Messages

As soon as i downloaded firefox, this "mozctl.dll" is not working. What do i do?

I downloaded firefox 3.6 and tried to run another program. My computer said "mozctl.dll was not working. What do i do?
== This happened ==
Not sure how often
== I downloaded firefox 3.6

Does this help http://www.dllnotfound.net/mozctl.dll.html

Dll soes not work after restart teststand

Hi NI Team,
I have an issue whereby i am using a 3rd part dll to program a device. At 1st it is able to program correctly using the designated dll. But after i've restart the teststand, it still able to point to the dll, but seems like the dll is not working as it should be. In order to make it work again, I need to change the dll path to another location in order to make it work.
I've attached the following
Sequence.jpg
- Shows the module configuration
return_result.jpg
- Shows the return result of a weird return as the suppose return result suppose to be "1" or "0"
Please do advice. Thanks
Attachments:
Sequence.JPG ‏190 KB
return_result.JPG ‏21 KB

Hi There - Thanks for the reply,
The problem i am facing is the dll that i am using does not work as it should after restart teststand, unless i change the path or point the dll to another new path. The error that i am getting is, the return result shows that it can't open the file path that that has been defined in the dll call path name parameter. The weird thing is, the dll able to work (able to point to the right image again ) after i point the dll to another path, meaning if i create a new folder then dump in the same dll inside the folder and point the dll to new folder it able to work. But i will see the same problem again after i restart teststand. In terms of unloading the dll, i have tried the run options to unload module either after step end or sequence end. But the problem still exists.....

Function HypSetSheetOption of the lib HsAddin.dll is not working good

Hi all,
i have a problem with a macro excel that uses the library HsAddin.dll.
First of all, the macro excel runs on Microsoft Office 2003; the version of smart view installed is 9.3.1.1.2.004 and the server has Microsoft Windows Server 2003, with Service Pack 2.
In my macro i have put a variable like this: varOpzione = HypSetSheetOption(R_NOME_FOGLIO, 16, 1). The macro takes a list of excel worksheets, refreshes those and then overwrite the refreshed sheets. With that variable initialized in that way, POV's members are displayed with member names and aliases. This is a problem for the users that work on the refreshed sheets, because, after the refresh they are not able to work on the sheets and refresh those again manually.
I have read this page: http://www.tcclab.com/Fresh%20Upload/Hyperion/SmartView/Docs/help/frameset.htm?/Fresh%20Upload/Hyperion/SmartView/Docs/help/hsv_help-13-50.htm#546380
in which is written that in order to display only member names i have to set parameter 0 instead of 1. I have done it, but in this way, macro does not retrieve any sheet. The error i got for every sheet is 'error during the retrieve'. I can't understand why this is happening.
Is there someone that could help me solving this issue?
Thank you in advance for your help.
Anna

The JDeveloper probably has a differnet vesion of the XDK - we have to be careful of the uptake of new versions to make sure we don't have any regressions.
<?xslt:maximum?> in the RTF becomes
<xsl:value-of select="xdoxslt:minimum(.//Measures.Dollars)" xdofo:field-name="xdoxslt:minimum(Measures.Dollars)" />
with:
<xsl:stylesheet version="2.0" xmlns:xdoxslt="http://www.oracle.com/XSL/Transform/java/oracle.xdo.template.rtf.XSLTFunctions">
Of course that works ONLY in xml publisher. I also would strongly recommend that you try the RTF templates.
Klaus
Edited by: KlausFabian on Mar 17, 2010 1:08 PM - correct typo

C DLL does not working in LabVIEW-2011, but works good in LabVIEW-2009

The C-Language dll which I have for an instrument is working good in LV2009 without any errors, but in 2011 it throws 1097 Error code. In this link, it is mentioned that calling convention in "Call Library Node" is changed since LV2010 which I guess could be the reason for the error. But trgically I need to develop my code in LV2011. Does anyone have an workaround to make the dll work in LV2011?
Thanks,
Ajay.
Solved!
Go to Solution.

And the particular issue at hand is, that stdcall functions CAN have but DON'T have to have a particular naming decoration in their exported name (a @<number> appended to the name, and LabVIEW doesn't show this decoration in the drop down box). Before LabVIEW 2010 the Call Library Node automagically corrected a configured C calling configuration to stdcall if it recognized that decoration. They removed that in 2010 because it is possible, and most probably happened in the wild, for a C function to be explicitedly named with this pattern but get exported as C calling convention. With this automatic and hidden correction, LabVIEW is totally unable to call such a function.
The not so nice thing about this would be IMHO that this automagic correction happened sneakily in the background without even being visible at all (the option in the Call Library Node stayed C calling convention, despite that LabVIEW really decided to use stdcall). And it got made even worse by the fact that 2010 removed this sneaky correction but did not add any mutation code to correct for that, when updating a VI from a previous LabVIEW version. That all said the evil has been done and can't be reversed now. Everybody just has to live with it.
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

Extension php_oci8_11g.dll is not working in xampp linux

Hello everyone
i installed xampp from following link
http://www.apachefriends.org/en/xampp-linux.html
and its work fine.when i enable extension php_oci8_11g.dll from php.ini my php code is downloading when i am trying to execute.
what is the problem.can any one help me.
thank you.

What exactly did you do? Php_oci8_11g.dll is for Windows but xampp-linux.html is for Linux.
Try installing Oracle Instant Client 10.2 from http://www.oracle.com/technetwork/topics/linuxsoft-082809.html
Then follow: http://www.apachefriends.org/en/faq-xampp-linux.html#oci8
You might find this free book useful: http://www.oracle.com/technetwork/topics/php/underground-php-oracle-manual-098250.html
There is a dedicated Oracle PHP forum at http://www.oracle.com/technetwork/forums/php/index.html

Dlls are not working for me in Report server

Hi,
I am using SSRS 2008 and deployed some reports to the report server. For localization purpose we are having some Dlls which need to be registered in the report server. I am using some methods from the dll.
Can someone please suggest how I can register these dlls to work in the report server for 2008, R2 and 2012.
Thanks,
sarat chandra sahoo

Hi sarat,
Per my understanding that you have issue when you registered an dll and use the method from it, right?
Generally, You can follow steps below to make the custom assemblies works fine:
Create a custom assembly
Copy the custom assembly to the SQL Reporting Services folders
Adding a reference to the custom assembly in Reporting Services
Code access security if the custom assembly requires additional permissions
Details information about the above steps below for your reference:
How to use custom assemblies or embedded
Some similar related:
http://www.codeproject.com/Articles/294636/Localizing-SQL-Server-Reporting-Services-Reports
http://stackoverflow.com/questions/19938268/using-external-assemblys-methods-results-as-a-dataset
http://www.codeproject.com/Articles/30555/Adding-Custom-Assemblies-in-SQL-Server-Reporting-S
If you still have any problem, please feel free to ask.
Regards,
Vicky Liu
Vicky Liu
TechNet Community Support

CHM-File: Glossary is not showing HHActiveX.dll does not work

Hi guys,
I'm sorry, I know the problem's been diskussed a lot. But I still have the problem, that after generating my CHM-File the glossary tab is empty. I already tried registering various HHActiveX.dlls i found in robohelps installation directory.
I tried registering them by using %windir%\system32\cmd.exe and %windir%\syswow64\cmd.exe.
The dlls I tried to register are:
C:\Program Files (x86)\Adobe\Adobe RoboHelp 9\RoboHTML\HHActiveX.dll
C:\Program Files (x86)\Adobe\Adobe RoboHelp 9\Redist\HHActiveX.dll
C:\Program Files (x86)\Adobe\Adobe RoboHelp 9\Redist\x64\HHActiveX.dll
I tried to register them all together and i tried to register only one at a time.
The funny thing is, after generating and opening the file directly out of robohelp, the glossary showed up once. After closing and opening the same file, the glossary was again empty.
I am using RoboHelp 9 on Windows 8.1. 64-bit.
Is there a chance to get that CHM-File to work?
Thank's in advance.

Thank you for your answer.
Sorry, I forgot to mention, when I was registering the dlls by using cmd.exe in the system32 directory and the syswow64 directory, I was typing "regsvr32 C:\Windows\System32\HHActiveX.dll"
Also I have been using the cmd.exes that are located in system32 and syswow64, each time using the "regsvr32 <path><dll-name>"-command. The cmd.exes where executed with administator's rights. Isn't that the same procedure mentioned in your link?
I was trying to have both the 32-bit-dll and the 64-bit-dll version registered at the same time and lateron for troubleshooting just one of them at a time. (now that I come to think of it, is it even possible to register two versions of the same dll at a time?)
I'm starting to get really confused.
Which Version of the DLL do I need to register by using which of the cmd.exes/regsvr32-versions?
C:\Program Files (x86)\Adobe\Adobe RoboHelp 9\RoboHTML\HHActiveX.dll > in system32\cmd.exe oder syswow64\cmd.exe?
C:\Program Files (x86)\Adobe\Adobe RoboHelp 9\Redist\HHActiveX.dll > in system32\cmd.exe oder syswow64\cmd.exe?
C:\Program Files (x86)\Adobe\Adobe RoboHelp 9\Redist\x64\HHActiveX.dll > in system32\cmd.exe oder syswow64\cmd.exe?
And does the dll have to be in the directory of the regsvr32.exe while registering? Does it take a reboot for the effect to show?

DLL library not working on XP

Hello
I have a library that crashes on XP when it is tring to load mscorlib.resources.
The code is
Assembly^ MyAssembly;
Assembly^ objExecutingAssemblies;
String^ strTempAssmbPath = "";
objExecutingAssemblies = Assembly::GetExecutingAssembly();
array<AssemblyName ^>^ arrReferencedAssmbNames = objExecutingAssemblies->GetReferencedAssemblies();
//Loop through the array of referenced assembly names.
for each (AssemblyName^ strAssmbName in arrReferencedAssmbNames) {
//Check for the assembly names that have raised the "AssemblyResolve" event.
if (strAssmbName->FullName->Substring(0, strAssmbName->FullName->IndexOf(",")) == args->Name->Substring(0, args->Name->IndexOf(","))) {
//Here is the problem, execution never enters this IF
strTempAssmbPath = pathBase + args->Name->Substring(0, args->Name->IndexOf(",")) + ".dll";
break;
//Load the assembly from the specified path.
if (strTempAssmbPath=="") {
Console::Write("Nothing to load, library not found " + args->Name->Substring(0, args->Name->IndexOf(",")) + "\n");
} else {
MyAssembly = Assembly::LoadFrom(strTempAssmbPath);
return MyAssembly;
Variable strTempAssmbPath is never initialized.
I tried to copy mscorlib.resources.dll in Windows, Windows/system32 and in the application folder but the error is the same in all cases.
Thank you

Just as Pavel's said, you need to debug your code and find out why execution never enters this IF. Set a breakpointer and check the value of args if it is correct.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Unable to find ZENAUTIL.DLL

Hi
Some of our workstations (mainly XP) are facing following problem after installing and or upgrading to ZfD Agent 4.0
and or 4.0.1
During startup i get an error "Unable to load zenautil.dll
I can regenerate the error by trying to start the service "Novell Zfd Remote Management"
I checked TID10076950 but the environment contains the correct path "c:\Program Files\Novell\Zenworks"
I can start "wmsched" via the Start -> Run as mentioned in another thread (zenautil.dll (TID not working)) to
doublecheck if the path var s working.
The file "zenautil.dll" is present in dir "c:\Program Files\Novell\Zenworks\RemoteManagement\RMAgent\"
After checking the logfiles "c:\Program Files\Novell\Zenworks\RemoteManagement\RMAgent\RME rrorLog1.txt"
I could fix the problem on some clients (some where missing a value in the registry)
"Critical : Failed to open HKLM\Software\Novell\ZENWorks\InstallPath"
But there are still a few I can't fix. and their logs telling me this
Normal : Resource DLL is successfully loaded
Normal : Loading : C:\Program Files\Novell\ZENworks\ZenLite.dll
Critical : ZENNDSUtil: Failed to load C:\Program Files\Novell\ZENworks\ZenLite.dll. Error: 126
Critical : LoadZenAutilLibraryAndGetProc : LoadZenLibraries() Failed !!!
Normal : ZenRem32.exe : ZenRem32ServiceMain() Failed to load one of the ZenAutil.dll and its dependent DLLs
Zenlite.dll is present at "C:\Program Files\Novell\ZENworks\ZenLite.dll" it is the correct version and
there are no duplicates present
Any Ideas?

Dave,
It appears that in the past few days you have not received a response to your posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
- Check all of the other support tools and options available at http://support.novell.com in both the "free product support" and "paid product support" drop down boxes.
- You could also try posting your message again. Make sure it is posted in the correct newsgroup. (http://support.novell.com/forums)
If this is a reply to a duplicate posting, please ignore and accept our apologies and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

CMSS3D is not working !!!! after modding teh shell32.dll PLEASE HELP

? hello there,
i have a question...why does cmss3d uses the shell32.dll in system32?
cause i wanted to edit my shell32 to have a new icons, etc...
so, when i change the shell32, even i change onnly one icon, the cmss3d is not working anymore...
as sonest i change the shell32 back to its original, even without restart, the cmss3d is working again like it should!!
so how can i fix this...what is creative even doing with this file?
PLEASE HELP me, i need to do some modification to shell32.dll...
but i also need cmss3d to work...can maybe someone can tell me what the cmss3d is loking for in the shell32.dll so i can make a workaround or something...cause this is related to all creative x-fi users..!!
greetz, BGViruS

H? ha, lets say it like that..
i talked with people from MS..and they said it shouldnt happen..
Creative is the only soundcard maker that has a prob with that...
if you guys would make your software better than betas it wouldnt happen..
anyway i asked you guys something that still no one answered..
question: for what reason does the cmss3d modul uses the shell32 ?
thats what i wanted to know so i can change it.
no other software like from realtek and so on hass no prob with that..and chancing a pic in the shell32 isnt coruppting system files, ask MS for yourself...
so, please answer my question, why is cmss3d using the shell32 and in what way...
thats all i want to know. after that you can close this threat...
if you are really a serious manufacter then help me insted of talking bull**bleep**
greetz

My i tunes is not working anymore. it says the application failed to start because MSVCR80.dll was not found. I have tried re-installing the program but it doesn't work.

Hello,
Yesterday I tried to get onto iTunes and was unable to. I keep getting this message:
Itunes.exe - Unable to locate component.
This application has failed to start because MSVCR80.dll was not found.
Re-installing the application may fix this problem.
I have tried to uninstall and re-install the program several times but cannot get it to work. Now I get this message:
iTunes was not installed correctly. Please reinstall iTunes.
Error 7 (Windows error 126)
I have tried to do what I can but am not really iTunes savy and would like to get this issue resolved. Can anyone help me?
THANK YOU!!
Cyn

Hello there, Cyn.
The following Knowledge Base article provides some great information for troubleshooting your issue. Keep in mind uninstalling and reinstalling has to be done in a very specific fashion, therefore use the guidelines from this article to accomplish this:
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/ht1926
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

After installing the latest version of ITunes I get an error message that says this application has failed to start because MSVCR80.dll was not found. how do I get Itunes to start working again?

After installing the latest version of ITunes I get an error message that says this application has failed to start because MSVCR80.dll was not found. how do I get Itunes to start working again?

See... Unable to install or open > http://support.apple.com/kb/TS5376
Also See this User Tip by turingtest2
https://discussions.apple.com/docs/DOC-6562

After the last update iTunes no longer works... "This application failed to start because MSVCF80.dll was not found. Re-installing the application may fix this problem" I tried and it did not fix the problem?

After the last update iTunes no longer works... "This application failed to start because MSVCF80.dll was not found. Re-installing the application may fix this problem" I tried and it did not fix the problem?

Click here and follow the instructions.
(99061)

Finger print reader not working - file PSQLPWD.DLL

Hi,
I need some help, I run an spyware and detected the file PSQLPWD.DLL and renamed it as PSQLPWD.DLL.VIR.VIR and deleted it. After that I was not able to use th finger print reader. I read that that file is part of the is part of Thinkvantage longon that belongs to thinkadvantage fingerprint protector. I believe i need it in order to use again my finger print reader. Please correct me if i'm wrong about my thougts. if it is true, how can i get that file back (it has been completely removed from my system)?
Thanks

Hi @Toker ,
Welcome to the HP Forums!
I would like to take a moment and thank you for using the forum, it is a great place to find answers. For you to have the best experience in the HP forum, I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand that after upgrading to Windows 8, you fingerprint reader is not working.
I would be happy to look for updated drivers for you, but I will need your exact model of HP HDX18 Notebook PC you have. Is your Windows 8, 32 or 64 bit?
How Do I Find My Model Number or Product Number?
Here are some links that may assist you in the meantime.
Downloading or Updating Software and Drivers for HP Computers
Software Does not Install or Work Correctly (Windows 8)
Have you tried running The HP Support Assistant to aid with HP updates and resolving issues?
Have you tried Using Automated Troubleshooting (Windows 8) to aid you?
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Zenautil.dll (TID not working)

Similar Messages

Maybe you are looking for