Zend Email
Hello David Powers.
I was working zend e-mail on lesson 8 Dreamweaver cs5 with php. I have a problem reset password page in test website. Here is the link http://test.citidesigners.com/forget.php
When I enter registered email like. [email protected] and I submit it, I am getting this error Incorrect authentication data.
and this message
Request Received
An email has been sent to your registered address with instructions for resetting your password. and I am not recieving any emails.
Please help in solving this error. I am not sure why it's failing to authenticate properly.
Here is mail connector script
<?php
$mailhost = 'localhost';
$mailconfig = array('auth' => 'login',
'username' => '[email protected]',
'password' => 'password
$transport = new Zend_Mail_Transport_Smtp($mailhost, $mailconfig);
Zend_Mail::setDefaultTransport($transport);
Thanks
The issue healed thyself within a day. No idea why but no longer need help on this issue.
Similar Messages
-
Hello:
I am following the book "Adobe Dreamweaver CS5 with PHP" by David Powers (an excellent book I might add) and am currently going over chapter 8. (Zending email). I have completed the section concerning processing of a simple user feedback script, and I beleive I have my connector script, and code correct. My testing server is running and correctly defined in DW. When I attempt to submit the form in a browser window, I get the message "could not open socket" at the top of the browser document window. I assume this involves adjusting a configuration file but I can not figure out where it is. Any help out there?
My setup:
Windows 7
Apache2.2.17
PHP5.3.4
ZendFramework-1.11.4-minimalBoy, this one sure has me stumped.
Despite using the amendment to the catch block that you so graciously suggested, and turning off my firewall, and antivirus software, all I get is the error message "could not open socket" at the top of the browser (various) document window (and a resetting of all fields and textarea):
Here are my files. (I understand I will be changing my passwords, and getting a new recaptcha key, but I am desperate to fix this):
I also amended the mail_connector.php script using the (Outgoing Mail Server: (SSL) server306.webhostingpad.com (server requires authentication) port 465) choice below with the same result.
My hosting company provided this to me for manual setting of email:
Manual Settings
Mail Server Username: test1+housecalls4pets.com
Incoming Mail Server: mail.housecalls4pets.com
Incoming Mail Server: (SSL) server306.webhostingpad.com
Outgoing Mail Server: mail.housecalls4pets.com (server requires authentication) port 2626
Outgoing Mail Server: (SSL) server306.webhostingpad.com (server requires authentication) port 465
Supported Incoming Mail Protocols: POP3, POP3S (SSL/TLS), IMAP, IMAPS (SSL/TLS)
Supported Outgoing Mail Protocols: SMTP, SMTPS (SSL/TLS)
library.php:
<?php
// Adjust the path to match the location of the library folder on your system
$library = 'C:/php_library/ZendFramework-1.11.4-minimal/library';
set_include_path(get_include_path() . PATH_SEPARATOR . $library);
require_once('Zend/Loader/Autoloader.php');
try {
Zend_Loader_Autoloader::getInstance();
$write = array('host' => 'localhost',
'username' => 'cs5write',
'password' => 'Bow!e#CS5',
'dbname' => 'phpcs5');
$read = array('host' => 'localhost',
'username' => 'cs5read',
'password' => '5T@rmaN',
'dbname' => 'phpcs5');
// Comment out the next two lines if using mysqli
// and remove the comments from the last two lines
$dbWrite = new Zend_Db_Adapter_Pdo_Mysql($write);
$dbRead = new Zend_Db_Adapter_Pdo_Mysql($read);
//$dbWrite = new Zend_Db_Adapter_Mysqli($write);
//$dbRead = new Zend_Db_Adapter_Mysqli($read);
catch (Exception $e) {
echo 'Class: ' . get_class($e) . ' says: ' . $e->getMessage();
mail_connector.php:
<?php
$mailhost = 'smtp.mail.housecalls4pets.com';
$mailconfig = array('auth' => 'login',
'username' =>'[email protected]',
'password' => 'Buffy1481',
'port' => '2626');
$transport = new Zend_Mail_Transport_Smtp($mailhost, $mailconfig);
Zend_Mail::setDefaultTransport($transport);
process_comments.php
<?php
require_once('library.php');
$errors = array();
try {
$public_key = '6LekzsUSAAAAAP99fQ32-j-qlp2wUWqeUc3_HvkX';
$private_key = '6LekzsUSAAAAAHxKj135LEE9zoAxQng1A3azJYgE';
$recaptcha = new Zend_Service_ReCaptcha($public_key, $private_key);
if (isset($_POST['send'])) {
// validate the user input
if (empty($_POST['recaptcha_response_field'])) {
$errors['recaptcha'] = 'reCAPTCHA field is required';
} else {
$result = $recaptcha->verify($_POST['recaptcha_challenge_field'], $_POST['recaptcha_response_field']);
if (!$result->isValid()) {
$errors['recaptcha'] = 'Try again';
$val = new Zend_Validate_Alnum(TRUE);
if (!$val->isValid($_POST['name'])) {
$errors['name'] = 'Name is required';
$val = new Zend_Validate_EmailAddress();
if (!$val->isValid($_POST['email'])) {
$errors['email'] = 'Email address is required';
$val = new Zend_Validate_StringLength(10);
if (!$val->isValid($_POST['comments'])) {
$errors['comments'] = 'Required';
if (!$errors) {
// create and send the email
require_once('mail_connector.php');
$mail = new Zend_Mail('UTF-8');
$mail->addTo('[email protected]', 'A N Other');
$mail->setFrom('[email protected]', 'Zend Mail Test');
$mail->setSubject('Comments from feedback form');
$mail->setReplyTo($_POST['email'], $_POST['name']);
$text = "Name: {$_POST['name']}\r\n\r\n";
$text .= "Email: {$_POST['email']}\r\n\r\n";
$text .= "Comments: {$_POST['comments']}";
$html = "<p><strong>Name: </strong><a href='mailto:{$_POST['email']}'>{$_POST['name']}</a></p>";
$html .= '<p><strong>Comments: </strong>' . nl2br($_POST['comments']) . '</p>';
$mail->setBodyText($text, 'UTF-8');
$mail->setBodyHtml($html, 'UTF-8');
$success = $mail->send();
if (!$success) {
$errors = TRUE;
} catch (Exception $e) {
echo $e->getMessage();
?>
comments.php:
<?php
require_once('scripts/process_comments.php');
?>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<title>Contact Us</title>
<link href="../../styles/users_wider.css" rel="stylesheet" type="text/css" />
</head>
<body>
<h1>Get In Touch</h1>
<form id="form1" name="form1" method="post" action="">
<?php if (isset($success) && !$errors) { ?>
<p>Thank you. Your comments have been sent.</p>
<?php } elseif (isset($success) && $errors) { ?>
<p>Sorry, there was a problem. Please try later.</p>
<?php } ?>
<p>All fields are required</p>
<p>
<label for="name">Your name:</label>
<input value="<?php if ($_POST && $errors) {
echo htmlentities($_POST['name'], ENT_COMPAT, 'UTF-8');
}?>" type="text" name="name" id="name" />
<span>
<?php if ($_POST && isset($errors['name'])) {
echo $errors['name'];
} ?>
</span></p>
<p>
<label for="email">Email address:</label>
<input value="<?php if ($_POST && $errors) {
echo htmlentities($_POST['email'], ENT_COMPAT, 'UTF-8');
}?>" type="text" name="email" id="email" />
<span>
<?php if ($_POST && isset($errors['email'])) {
echo $errors['email'];
} ?>
</span></p>
<p>
<label for="comments">Comments:</label>
<textarea name="comments" id="comments" cols="45" rows="5"><?php if ($_POST && $errors) {echo htmlentities($_POST['comments'],ENT_COMPAT, 'UTF-8'); }?></textarea>
<span>
<?php if ($_POST && isset($errors['comments'])) {
echo $errors['comments'];
} ?>
</span></p>
<?php if (isset($errors['recaptcha'])) {
echo "<p><span>{$errors['recaptcha']}</span></p>";
echo $recaptcha->getHtml(); ?>
<p>
<input type="submit" name="send" id="send" value="Send Comments" />
</p>
</form>
</body>
</html> -
Httpd fail to start after Zend Core installation
Hi!
I need Zend, so I installed it using this instruction.
The problem is that httpd daemon faild to start after that.
Here is my /etc/httpd/conf/httpd.conf:
# This is the main Apache HTTP server configuration file. It contains the
# configuration directives that give the server its instructions.
# See <URL:http://httpd.apache.org/docs/2.2> for detailed information.
# In particular, see
# <URL:http://httpd.apache.org/docs/2.2/mod/directives.html>
# for a discussion of each configuration directive.
# Do NOT simply read the instructions in here without understanding
# what they do. They're here only as hints or reminders. If you are unsure
# consult the online docs. You have been warned.
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path. If the filenames do *not* begin
# with "/", the value of ServerRoot is prepended -- so "/var/log/httpd/foo_log"
# with ServerRoot set to "/etc/httpd" will be interpreted by the
# server as "/etc/httpd//var/log/httpd/foo_log".
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
# Do not add a slash at the end of the directory path. If you point
# ServerRoot at a non-local disk, be sure to point the LockFile directive
# at a local disk. If you wish to share the same ServerRoot for multiple
# httpd daemons, you will need to change at least LockFile and PidFile.
ServerRoot "/etc/httpd"
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, instead of the default. See also the <VirtualHost>
# directive.
# Change this to Listen on specific IP addresses as shown below to
# prevent Apache from glomming onto all bound IP addresses.
#Listen 12.34.56.78:80
Listen 80
# Dynamic Shared Object (DSO) Support
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available _before_ they are used.
# Statically compiled modules (those listed by `httpd -l') do not need
# to be loaded here.
# Example:
# LoadModule foo_module modules/mod_foo.so
LoadModule authn_file_module modules/mod_authn_file.so
LoadModule authn_dbm_module modules/mod_authn_dbm.so
LoadModule authn_anon_module modules/mod_authn_anon.so
LoadModule authn_dbd_module modules/mod_authn_dbd.so
LoadModule authn_default_module modules/mod_authn_default.so
LoadModule authz_host_module modules/mod_authz_host.so
LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
LoadModule authz_user_module modules/mod_authz_user.so
LoadModule authz_dbm_module modules/mod_authz_dbm.so
LoadModule authz_owner_module modules/mod_authz_owner.so
LoadModule authnz_ldap_module modules/mod_authnz_ldap.so
LoadModule authz_default_module modules/mod_authz_default.so
LoadModule auth_basic_module modules/mod_auth_basic.so
LoadModule auth_digest_module modules/mod_auth_digest.so
LoadModule file_cache_module modules/mod_file_cache.so
LoadModule cache_module modules/mod_cache.so
LoadModule disk_cache_module modules/mod_disk_cache.so
LoadModule mem_cache_module modules/mod_mem_cache.so
LoadModule dbd_module modules/mod_dbd.so
LoadModule dumpio_module modules/mod_dumpio.so
LoadModule ext_filter_module modules/mod_ext_filter.so
LoadModule include_module modules/mod_include.so
LoadModule filter_module modules/mod_filter.so
LoadModule substitute_module modules/mod_substitute.so
LoadModule deflate_module modules/mod_deflate.so
LoadModule ldap_module modules/mod_ldap.so
LoadModule log_config_module modules/mod_log_config.so
LoadModule log_forensic_module modules/mod_log_forensic.so
LoadModule logio_module modules/mod_logio.so
LoadModule env_module modules/mod_env.so
LoadModule mime_magic_module modules/mod_mime_magic.so
LoadModule cern_meta_module modules/mod_cern_meta.so
LoadModule expires_module modules/mod_expires.so
LoadModule headers_module modules/mod_headers.so
LoadModule ident_module modules/mod_ident.so
LoadModule usertrack_module modules/mod_usertrack.so
#LoadModule unique_id_module modules/mod_unique_id.so
LoadModule setenvif_module modules/mod_setenvif.so
LoadModule version_module modules/mod_version.so
LoadModule proxy_module modules/mod_proxy.so
LoadModule proxy_connect_module modules/mod_proxy_connect.so
LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
LoadModule proxy_http_module modules/mod_proxy_http.so
LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
LoadModule ssl_module modules/mod_ssl.so
LoadModule mime_module modules/mod_mime.so
LoadModule dav_module modules/mod_dav.so
LoadModule status_module modules/mod_status.so
LoadModule autoindex_module modules/mod_autoindex.so
LoadModule asis_module modules/mod_asis.so
LoadModule info_module modules/mod_info.so
LoadModule suexec_module modules/mod_suexec.so
LoadModule cgi_module modules/mod_cgi.so
LoadModule cgid_module modules/mod_cgid.so
LoadModule dav_fs_module modules/mod_dav_fs.so
LoadModule vhost_alias_module modules/mod_vhost_alias.so
LoadModule negotiation_module modules/mod_negotiation.so
LoadModule dir_module modules/mod_dir.so
LoadModule imagemap_module modules/mod_imagemap.so
LoadModule actions_module modules/mod_actions.so
LoadModule speling_module modules/mod_speling.so
LoadModule userdir_module modules/mod_userdir.so
LoadModule alias_module modules/mod_alias.so
LoadModule rewrite_module modules/mod_rewrite.so
#FastCGI module
LoadModule fcgid_module lib/apache/mod_fcgid.so
AddHandler fcgid-script .php
FCGIWrapper /usr/local/bin/php-cgi .php
SocketPath /tmp/fcgidsock
SharememPath /tmp/fcgidshm
#php module
#LoadModule php5_module modules/libphp5.so
<IfModule !mpm_netware_module>
<IfModule !mpm_winnt_module>
# If you wish httpd to run as a different user or group, you must run
# httpd as root initially and it will switch.
# User/Group: The name (or #number) of the user/group to run httpd as.
# It is usually good practice to create a dedicated user and group for
# running httpd, as with most system services.
User http
Group http
</IfModule>
</IfModule>
# 'Main' server configuration
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition. These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
# ServerAdmin: Your address, where problems with the server should be
# e-mailed. This address appears on some server-generated pages, such
# as error documents. e.g. [email protected]
ServerAdmin [email protected]
# ServerName gives the name and port that the server uses to identify itself.
# This can often be determined automatically, but we recommend you specify
# it explicitly to prevent problems during startup.
# If your host doesn't have a registered DNS name, enter its IP address here.
#ServerName www.example.com:80
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
DocumentRoot "/srv/http"
# Each directory to which Apache has access can be configured with respect
# to which services and features are allowed and/or disabled in that
# directory (and its subdirectories).
# First, we configure the "default" to be a very restrictive set of
# features.
<Directory />
Options FollowSymLinks
AllowOverride None
Order deny,allow
Deny from all
</Directory>
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
# This should be changed to whatever you set DocumentRoot to.
<Directory "/srv/http">
# Possible values for the Options directive are "None", "All",
# or any combination of:
# Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
# Note that "MultiViews" must be named *explicitly* --- "Options All"
# doesn't give it to you.
# The Options directive is both complicated and important. Please see
# http://httpd.apache.org/docs/2.2/mod/core.html#options
# for more information.
Options Indexes FollowSymLinks
# AllowOverride controls what directives may be placed in .htaccess files.
# It can be "All", "None", or any combination of the keywords:
# Options FileInfo AuthConfig Limit
AllowOverride None
# Controls who can get stuff from this server.
Order allow,deny
Allow from all
</Directory>
# DirectoryIndex: sets the file that Apache will serve if a directory
# is requested.
<IfModule dir_module>
DirectoryIndex index.html
</IfModule>
# The following lines prevent .htaccess and .htpasswd files from being
# viewed by Web clients.
<FilesMatch "^\.ht">
Order allow,deny
Deny from all
Satisfy All
</FilesMatch>
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here. If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
ErrorLog "/var/log/httpd/error_log"
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
LogLevel warn
<IfModule log_config_module>
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common
<IfModule logio_module>
# You need to enable mod_logio.c to use %I and %O
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
</IfModule>
# The location and format of the access logfile (Common Logfile Format).
# If you do not define any access logfiles within a <VirtualHost>
# container, they will be logged here. Contrariwise, if you *do*
# define per-<VirtualHost> access logfiles, transactions will be
# logged therein and *not* in this file.
CustomLog "/var/log/httpd/access_log" common
# If you prefer a logfile with access, agent, and referer information
# (Combined Logfile Format) you can use the following directive.
#CustomLog "/var/log/httpd/access_log" combined
</IfModule>
<IfModule alias_module>
# Redirect: Allows you to tell clients about documents that used to
# exist in your server's namespace, but do not anymore. The client
# will make a new request for the document at its new location.
# Example:
# Redirect permanent /foo http://www.example.com/bar
# Alias: Maps web paths into filesystem paths and is used to
# access content that does not live under the DocumentRoot.
# Example:
# Alias /webpath /full/filesystem/path
# If you include a trailing / on /webpath then the server will
# require it to be present in the URL. You will also likely
# need to provide a <Directory> section to allow access to
# the filesystem path.
# ScriptAlias: This controls which directories contain server scripts.
# ScriptAliases are essentially the same as Aliases, except that
# documents in the target directory are treated as applications and
# run by the server when requested rather than as documents sent to the
# client. The same rules about trailing "/" apply to ScriptAlias
# directives as to Alias.
ScriptAlias /cgi-bin/ "/srv/http/cgi-bin/"
</IfModule>
<IfModule cgid_module>
# ScriptSock: On threaded servers, designate the path to the UNIX
# socket used to communicate with the CGI daemon of mod_cgid.
#Scriptsock /var/run/httpd/cgisock
</IfModule>
# "/srv/http/cgi-bin" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
<Directory "/srv/http/cgi-bin">
AllowOverride None
Options None
Order allow,deny
Allow from all
</Directory>
# DefaultType: the default MIME type the server will use for a document
# if it cannot otherwise determine one, such as from filename extensions.
# If your server contains mostly text or HTML documents, "text/plain" is
# a good value. If most of your content is binary, such as applications
# or images, you may want to use "application/octet-stream" instead to
# keep browsers from trying to display binary files as though they are
# text.
DefaultType text/plain
<IfModule mime_module>
# TypesConfig points to the file containing the list of mappings from
# filename extension to MIME-type.
TypesConfig conf/mime.types
# AddType allows you to add to or override the MIME configuration
# file specified in TypesConfig for specific file types.
#AddType application/x-gzip .tgz
# AddEncoding allows you to have certain browsers uncompress
# information on the fly. Note: Not all browsers support this.
#AddEncoding x-compress .Z
#AddEncoding x-gzip .gz .tgz
# If the AddEncoding directives above are commented-out, then you
# probably should define those extensions to indicate media types:
AddType application/x-compress .Z
AddType application/x-gzip .gz .tgz
# AddHandler allows you to map certain file extensions to "handlers":
# actions unrelated to filetype. These can be either built into the server
# or added with the Action directive (see below)
# To use CGI scripts outside of ScriptAliased directories:
# (You will also need to add "ExecCGI" to the "Options" directive.)
#AddHandler cgi-script .cgi
# For type maps (negotiated resources):
#AddHandler type-map var
# Filters allow you to process content before it is sent to the client.
# To parse .shtml files for server-side includes (SSI):
# (You will also need to add "Includes" to the "Options" directive.)
#AddType text/html .shtml
#AddOutputFilter INCLUDES .shtml
</IfModule>
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type. The MIMEMagicFile
# directive tells the module where the hint definitions are located.
#MIMEMagicFile conf/magic
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external redirects
# Some examples:
ErrorDocument 400 /error.php?400
ErrorDocument 401 /error.php?401
ErrorDocument 403 /error.php?403
ErrorDocument 404 /error.php?404
ErrorDocument 500 /error.php?500
# EnableMMAP and EnableSendfile: On systems that support it,
# memory-mapping or the sendfile syscall is used to deliver
# files. This usually improves server performance, but must
# be turned off when serving from networked-mounted
# filesystems or if support for these functions is otherwise
# broken on your system.
#EnableMMAP off
#EnableSendfile off
# Supplemental configuration
# The configuration files in the conf/extra/ directory can be
# included to add extra features or to modify the default configuration of
# the server, or you may simply copy their contents here and change as
# necessary.
# Server-pool management (MPM specific)
#Include conf/extra/httpd-mpm.conf
# Multi-language error messages
Include conf/extra/httpd-multilang-errordoc.conf
# Fancy directory listings
Include conf/extra/httpd-autoindex.conf
# Language settings
Include conf/extra/httpd-languages.conf
# User home directories
Include conf/extra/httpd-userdir.conf
# Real-time info on requests and configuration
#Include conf/extra/httpd-info.conf
# Virtual hosts
Include conf/extra/httpd-vhosts.conf
# Local access to the Apache HTTP Server Manual
#Include conf/extra/httpd-manual.conf
# Distributed authoring and versioning (WebDAV)
#Include conf/extra/httpd-dav.conf
# Various default settings
Include conf/extra/httpd-default.conf
# Secure (SSL/TLS) connections
#Include conf/extra/httpd-ssl.conf
# Note: The following must must be present to support
# starting without SSL on platforms with no /dev/random equivalent
# but a statically compiled-in mod_ssl.
#php include
Include conf/extra/php5_module.conf
<IfModule ssl_module>
SSLRandomSeed startup builtin
SSLRandomSeed connect builtin
</IfModule>
#<VirtualHost *:80>
#ServerName oldforum
#DocumentRoot /srv/oldforum
#</VirtualHost>
### Start of Zend Core
### PHP Apache Module
# LoadModule php5_module /usr/local/Zend/Core/modules/apache22/libphp5.so
### PHP FastCGI
LoadModule zend_enabler_module /usr/local/Zend/Core/modules/apache22/zend_enabler.so
FastCgiConfig /usr/local/Zend/Core/etc/zend_enabler.conf
AddHandler zend-enabler-script .php
### PHP CGI
# Action application/x-httpd-php /zend-cgi/php
# ScriptAlias /zend-cgi/ /usr/local/Zend/Core/cgi-bin/
AddType application/x-httpd-php .php
DirectoryIndex index.php
ExtendedStatus on
Alias /ZendCore /usr/local/Zend/Core/GUI
<Location /ZendCore>
Options FollowSymLinks
Order deny,allow
Allow from all
</Location>
<Location /server-status>
SetHandler server-status
Order deny,allow
Deny from all
Allow from localhost
Allow from 127.0.0.1
</Location>
<Location /server-info>
SetHandler server-info
Order deny,allow
Deny from all
Allow from localhost
Allow from 127.0.0.1
</Location>
### End of Zend Core
Here is my /etc/php.ini:
[PHP]
; About php.ini ;
; This file controls many aspects of PHP's behavior. In order for PHP to
; read it, it must be named 'php.ini'. PHP looks for it in the current
; working directory, in the path designated by the environment variable
; PHPRC, and in the path that was defined in compile time (in that order).
; Under Windows, the compile-time path is the Windows directory. The
; path in which the php.ini file is looked for can be overridden using
; the -c argument in command line mode.
; The syntax of the file is extremely simple. Whitespace and Lines
; beginning with a semicolon are silently ignored (as you probably guessed).
; Section headers (e.g. [Foo]) are also silently ignored, even though
; they might mean something in the future.
; Directives are specified using the following syntax:
; directive = value
; Directive names are *case sensitive* - foo=bar is different from FOO=bar.
; The value can be a string, a number, a PHP constant (e.g. E_ALL or M_PI), one
; of the INI constants (On, Off, True, False, Yes, No and None) or an expression
; (e.g. E_ALL & ~E_NOTICE), or a quoted string ("foo").
; Expressions in the INI file are limited to bitwise operators and parentheses:
; | bitwise OR
; & bitwise AND
; ~ bitwise NOT
; ! boolean NOT
; Boolean flags can be turned on using the values 1, On, True or Yes.
; They can be turned off using the values 0, Off, False or No.
; An empty string can be denoted by simply not writing anything after the equal
; sign, or by using the None keyword:
; foo = ; sets foo to an empty string
; foo = none ; sets foo to an empty string
; foo = "none" ; sets foo to the string 'none'
; If you use constants in your value, and these constants belong to a
; dynamically loaded extension (either a PHP extension or a Zend extension),
; you may only use these constants *after* the line that loads the extension.
; About this file ;
; This is the recommended, PHP 5-style version of the php.ini-dist file. It
; sets some non standard settings, that make PHP more efficient, more secure,
; and encourage cleaner coding.
; The price is that with these settings, PHP may be incompatible with some
; applications, and sometimes, more difficult to develop with. Using this
; file is warmly recommended for production sites. As all of the changes from
; the standard settings are thoroughly documented, you can go over each one,
; and decide whether you want to use it or not.
; For general information about the php.ini file, please consult the php.ini-dist
; file, included in your PHP distribution.
; This file is different from the php.ini-dist file in the fact that it features
; different values for several directives, in order to improve performance, while
; possibly breaking compatibility with the standard out-of-the-box behavior of
; PHP. Please make sure you read what's different, and modify your scripts
; accordingly, if you decide to use this file instead.
; - register_globals = Off [Security, Performance]
; Global variables are no longer registered for input data (POST, GET, cookies,
; environment and other server variables). Instead of using $foo, you must use
; you can use $_REQUEST["foo"] (includes any variable that arrives through the
; request, namely, POST, GET and cookie variables), or use one of the specific
; $_GET["foo"], $_POST["foo"], $_COOKIE["foo"] or $_FILES["foo"], depending
; on where the input originates. Also, you can look at the
; import_request_variables() function.
; Note that register_globals is going to be depracated (i.e., turned off by
; default) in the next version of PHP, because it often leads to security bugs.
; Read http://php.net/manual/en/security.registerglobals.php for further
; information.
; - register_long_arrays = Off [Performance]
; Disables registration of the older (and deprecated) long predefined array
; variables ($HTTP_*_VARS). Instead, use the superglobals that were
; introduced in PHP 4.1.0
; - display_errors = Off [Security]
; With this directive set to off, errors that occur during the execution of
; scripts will no longer be displayed as a part of the script output, and thus,
; will no longer be exposed to remote users. With some errors, the error message
; content may expose information about your script, web server, or database
; server that may be exploitable for hacking. Production sites should have this
; directive set to off.
; - log_errors = On [Security]
; This directive complements the above one. Any errors that occur during the
; execution of your script will be logged (typically, to your server's error log,
; but can be configured in several ways). Along with setting display_errors to off,
; this setup gives you the ability to fully understand what may have gone wrong,
; without exposing any sensitive information to remote users.
; - output_buffering = 4096 [Performance]
; Set a 4KB output buffer. Enabling output buffering typically results in less
; writes, and sometimes less packets sent on the wire, which can often lead to
; better performance. The gain this directive actually yields greatly depends
; on which Web server you're working with, and what kind of scripts you're using.
; - register_argc_argv = Off [Performance]
; Disables registration of the somewhat redundant $argv and $argc global
; variables.
; - magic_quotes_gpc = Off [Performance]
; Input data is no longer escaped with slashes so that it can be sent into
; SQL databases without further manipulation. Instead, you should use the
; function addslashes() on each input element you wish to send to a database.
; - variables_order = "GPCS" [Performance]
; The environment variables are not hashed into the $_ENV. To access
; environment variables, you can use getenv() instead.
; - error_reporting = E_ALL [Code Cleanliness, Security(?)]
; By default, PHP surpresses errors of type E_NOTICE. These error messages
; are emitted for non-critical errors, but that could be a symptom of a bigger
; problem. Most notably, this will cause error messages about the use
; of uninitialized variables to be displayed.
; - allow_call_time_pass_reference = Off [Code cleanliness]
; It's not possible to decide to force a variable to be passed by reference
; when calling a function. The PHP 4 style to do this is by making the
; function require the relevant argument by reference.
; Language Options ;
; Enable the PHP scripting language engine under Apache.
engine = On
; Enable compatibility mode with Zend Engine 1 (PHP 4.x)
zend.ze1_compatibility_mode = Off
; Allow the <? tag. Otherwise, only <?php and <script> tags are recognized.
; NOTE: Using short tags should be avoided when developing applications or
; libraries that are meant for redistribution, or deployment on PHP
; servers which are not under your control, because short tags may not
; be supported on the target server. For portable, redistributable code,
; be sure not to use short tags.
short_open_tag = On
; Allow ASP-style <% %> tags.
asp_tags = Off
; The number of significant digits displayed in floating point numbers.
precision = 14
; Enforce year 2000 compliance (will cause problems with non-compliant browsers)
y2k_compliance = On
; Output buffering allows you to send header lines (including cookies) even
; after you send body content, at the price of slowing PHP's output layer a
; bit. You can enable output buffering during runtime by calling the output
; buffering functions. You can also enable output buffering for all files by
; setting this directive to On. If you wish to limit the size of the buffer
; to a certain size - you can use a maximum number of bytes instead of 'On', as
; a value for this directive (e.g., output_buffering=4096).
output_buffering = 4096
; You can redirect all of the output of your scripts to a function. For
; example, if you set output_handler to "mb_output_handler", character
; encoding will be transparently converted to the specified encoding.
; Setting any output handler automatically turns on output buffering.
; Note: People who wrote portable scripts should not depend on this ini
; directive. Instead, explicitly set the output handler using ob_start().
; Using this ini directive may cause problems unless you know what script
; is doing.
; Note: You cannot use both "mb_output_handler" with "ob_iconv_handler"
; and you cannot use both "ob_gzhandler" and "zlib.output_compression".
; Note: output_handler must be empty if this is set 'On' !!!!
; Instead you must use zlib.output_handler.
;output_handler =
; Transparent output compression using the zlib library
; Valid values for this option are 'off', 'on', or a specific buffer size
; to be used for compression (default is 4KB)
; Note: Resulting chunk size may vary due to nature of compression. PHP
; outputs chunks that are few hundreds bytes each as a result of
; compression. If you prefer a larger chunk size for better
; performance, enable output_buffering in addition.
; Note: You need to use zlib.output_handler instead of the standard
; output_handler, or otherwise the output will be corrupted.
zlib.output_compression = Off
; You cannot specify additional output handlers if zlib.output_compression
; is activated here. This setting does the same as output_handler but in
; a different order.
;zlib.output_handler =
; Implicit flush tells PHP to tell the output layer to flush itself
; automatically after every output block. This is equivalent to calling the
; PHP function flush() after each and every call to print() or echo() and each
; and every HTML block. Turning this option on has serious performance
; implications and is generally recommended for debugging purposes only.
implicit_flush = Off
; The unserialize callback function will called (with the undefind class'
; name as parameter), if the unserializer finds an undefined class
; which should be instanciated.
; A warning appears if the specified function is not defined, or if the
; function doesn't include/implement the missing class.
; So only set this entry, if you really want to implement such a
; callback-function.
unserialize_callback_func=
; When floats & doubles are serialized store serialize_precision significant
; digits after the floating point. The default value ensures that when floats
; are decoded with unserialize, the data will remain the same.
serialize_precision = 100
; Whether to enable the ability to force arguments to be passed by reference
; at function call time. This method is deprecated and is likely to be
; unsupported in future versions of PHP/Zend. The encouraged method of
; specifying which arguments should be passed by reference is in the function
; declaration. You're encouraged to try and turn this option Off and make
; sure your scripts work properly with it in order to ensure they will work
; with future versions of the language (you will receive a warning each time
; you use this feature, and the argument will be passed by value instead of by
; reference).
allow_call_time_pass_reference = Off
; Safe Mode
safe_mode = Off
; By default, Safe Mode does a UID compare check when
; opening files. If you want to relax this to a GID compare,
; then turn on safe_mode_gid.
safe_mode_gid = Off
; When safe_mode is on, UID/GID checks are bypassed when
; including files from this directory and its subdirectories.
; (directory must also be in include_path or full path must
; be used when including)
safe_mode_include_dir =
; When safe_mode is on, only executables located in the safe_mode_exec_dir
; will be allowed to be executed via the exec family of functions.
safe_mode_exec_dir =
; Setting certain environment variables may be a potential security breach.
; This directive contains a comma-delimited list of prefixes. In Safe Mode,
; the user may only alter environment variables whose names begin with the
; prefixes supplied here. By default, users will only be able to set
; environment variables that begin with PHP_ (e.g. PHP_FOO=BAR).
; Note: If this directive is empty, PHP will let the user modify ANY
; environment variable!
safe_mode_allowed_env_vars = PHP_
; This directive contains a comma-delimited list of environment variables that
; the end user won't be able to change using putenv(). These variables will be
; protected even if safe_mode_allowed_env_vars is set to allow to change them.
safe_mode_protected_env_vars = LD_LIBRARY_PATH
; open_basedir, if set, limits all file operations to the defined directory
; and below. This directive makes most sense if used in a per-directory
; or per-virtualhost web server configuration file. This directive is
; *NOT* affected by whether Safe Mode is turned On or Off.
;open_basedir =
; This directive allows you to disable certain functions for security reasons.
; It receives a comma-delimited list of function names. This directive is
; *NOT* affected by whether Safe Mode is turned On or Off.
disable_functions =
; This directive allows you to disable certain classes for security reasons.
; It receives a comma-delimited list of class names. This directive is
; *NOT* affected by whether Safe Mode is turned On or Off.
disable_classes =
; Colors for Syntax Highlighting mode. Anything that's acceptable in
; <font color="??????"> would work.
;highlight.string = #DD0000
;highlight.comment = #FF9900
;highlight.keyword = #007700
;highlight.bg = #FFFFFF
;highlight.default = #0000BB
;highlight.html = #000000
; Misc
; Decides whether PHP may expose the fact that it is installed on the server
; (e.g. by adding its signature to the Web server header). It is no security
; threat in any way, but it makes it possible to determine whether you use PHP
; on your server or not.
expose_php = On
; Resource Limits ;
max_execution_time = 30 ; Maximum execution time of each script, in seconds
max_input_time = 60 ; Maximum amount of time each script may spend parsing request data
memory_limit = 128M ; Maximum amount of memory a script may consume (128MB)
; Error handling and logging ;
; error_reporting is a bit-field. Or each number up to get desired error
; reporting level
; E_ALL - All errors and warnings
; E_ERROR - fatal run-time errors
; E_WARNING - run-time warnings (non-fatal errors)
; E_PARSE - compile-time parse errors
; E_NOTICE - run-time notices (these are warnings which often result
; from a bug in your code, but it's possible that it was
; intentional (e.g., using an uninitialized variable and
; relying on the fact it's automatically initialized to an
; empty string)
; E_STRICT - run-time notices, enable to have PHP suggest changes
; to your code which will ensure the best interoperability
; and forward compatability of your code
; E_CORE_ERROR - fatal errors that occur during PHP's initial startup
; E_CORE_WARNING - warnings (non-fatal errors) that occur during PHP's
; initial startup
; E_COMPILE_ERROR - fatal compile-time errors
; E_COMPILE_WARNING - compile-time warnings (non-fatal errors)
; E_USER_ERROR - user-generated error message
; E_USER_WARNING - user-generated warning message
; E_USER_NOTICE - user-generated notice message
; Examples:
; - Show all errors, except for notices and coding standards warnings
;error_reporting = E_ALL & ~E_NOTICE & ~E_STRICT
; - Show all errors, except for notices
;error_reporting = E_ALL & ~E_NOTICE
; - Show only errors
;error_reporting = E_COMPILE_ERROR|E_ERROR|E_CORE_ERROR
; - Show all errors
error_reporting = E_ALL
; Print out errors (as a part of the output). For production web sites,
; you're strongly encouraged to turn this feature off, and use error logging
; instead (see below). Keeping display_errors enabled on a production web site
; may reveal security information to end users, such as file paths on your Web
; server, your database schema or other information.
display_errors = Off
; Even when display_errors is on, errors that occur during PHP's startup
; sequence are not displayed. It's strongly recommended to keep
; display_startup_errors off, except for when debugging.
display_startup_errors = Off
; Log errors into a log file (server-specific log, stderr, or error_log (below))
; As stated above, you're strongly advised to use error logging in place of
; error displaying on production web sites.
log_errors = On
; Set maximum length of log_errors. In error_log information about the source is
; added. The default is 1024 and 0 allows to not apply any maximum length at all.
log_errors_max_len = 1024
; Do not log repeated messages. Repeated errors must occur in same file on same
; line until ignore_repeated_source is set true.
ignore_repeated_errors = Off
; Ignore source of message when ignoring repeated messages. When this setting
; is On you will not log errors with repeated messages from different files or
; sourcelines.
ignore_repeated_source = Off
; If this parameter is set to Off, then memory leaks will not be shown (on
; stdout or in the log). This has only effect in a debug compile, and if
; error reporting includes E_WARNING in the allowed list
report_memleaks = On
; Store the last error/warning message in $php_errormsg (boolean).
track_errors = Off
; Disable the inclusion of HTML tags in error messages.
; Note: Never use this feature for production boxes.
;html_errors = Off
; If html_errors is set On PHP produces clickable error messages that direct
; to a page describing the error or function causing the error in detail.
; You can download a copy of the PHP manual from http://www.php.net/docs.php
; and change docref_root to the base URL of your local copy including the
; leading '/'. You must also specify the file extension being used including
; the dot.
; Note: Never use this feature for production boxes.
;docref_root = "/phpmanual/"
;docref_ext = .html
; String to output before an error message.
;error_prepend_string = "<font color=ff0000>"
; String to output after an error message.
;error_append_string = "</font>"
; Log errors to specified file.
;error_log = filename
; Log errors to syslog (Event Log on NT, not valid in Windows 95).
;error_log = syslog
; Data Handling ;
; Note - track_vars is ALWAYS enabled as of PHP 4.0.3
; The separator used in PHP generated URLs to separate arguments.
; Default is "&".
;arg_separator.output = "&"
; List of separator(s) used by PHP to parse input URLs into variables.
; Default is "&".
; NOTE: Every character in this directive is considered as separator!
;arg_separator.input = ";&"
; This directive describes the order in which PHP registers GET, POST, Cookie,
; Environment and Built-in variables (G, P, C, E & S respectively, often
; referred to as EGPCS or GPC). Registration is done from left to right, newer
; values override older values.
variables_order = "GPCS"
; Whether or not to register the EGPCS variables as global variables. You may
; want to turn this off if you don't want to clutter your scripts' global scope
; with user data. This makes most sense when coupled with track_vars - in which
; case you can access all of the GPC variables through the $HTTP_*_VARS[],
; variables.
; You should do your best to write your scripts so that they do not require
; register_globals to be on; Using form variables as globals can easily lead
; to possible security problems, if the code is not very well thought of.
register_globals = Off
; Whether or not to register the old-style input arrays, HTTP_GET_VARS
; and friends. If you're not using them, it's recommended to turn them off,
; for performance reasons.
register_long_arrays = Off
; This directive tells PHP whether to declare the argv&argc variables (that
; would contain the GET information). If you don't use these variables, you
; should turn it off for increased performance.
register_argc_argv = On
; Maximum size of POST data that PHP will accept.
post_max_size = 8M
; Magic quotes
; Magic quotes for incoming GET/POST/Cookie data.
magic_quotes_gpc = Off
; Magic quotes for runtime-generated data, e.g. data from SQL, from exec(), etc.
magic_quotes_runtime = Off
; Use Sybase-style magic quotes (escape ' with '' instead of \').
magic_quotes_sybase = Off
; Automatically add files before or after any PHP document.
auto_prepend_file =
auto_append_file =
; As of 4.0b4, PHP always outputs a character encoding by default in
; the Content-type: header. To disable sending of the charset, simply
; set it to be empty.
; PHP's built-in default is text/html
default_mimetype = "text/html"
;default_charset = "iso-8859-1"
; Always populate the $HTTP_RAW_POST_DATA variable.
;always_populate_raw_post_data = On
; Paths and Directories ;
; UNIX: "/path1:/path2"
;include_path = ".:/php/includes"
; Windows: "\path1;\path2"
;include_path = ".;c:\php\includes"
; The root of the PHP pages, used only if nonempty.
; if PHP was not compiled with FORCE_REDIRECT, you SHOULD set doc_root
; if you are running php as a CGI under any web server (other than IIS)
; see documentation for security issues. The alternate is to use the
; cgi.force_redirect configuration below
doc_root =
; The directory under which PHP opens the script using /~username used only
; if nonempty.
user_dir =
; Directory in which the loadable extensions (modules) reside.
;extension_dir = "./"
; Whether or not to enable the dl() function. The dl() function does NOT work
; properly in multithreaded servers, such as IIS or Zeus, and is automatically
; disabled on them.
enable_dl = On
; cgi.force_redirect is necessary to provide security running PHP as a CGI under
; most web servers. Left undefined, PHP turns this on by default. You can
; turn it off here AT YOUR OWN RISK
; **You CAN safely turn this off for IIS, in fact, you MUST.**
; cgi.force_redirect = 1
; if cgi.nph is enabled it will force cgi to always sent Status: 200 with
; every request.
; cgi.nph = 1
; if cgi.force_redirect is turned on, and you are not running under Apache or Netscape
; (iPlanet) web servers, you MAY need to set an environment variable name that PHP
; will look for to know it is OK to continue execution. Setting this variable MAY
; cause security issues, KNOW WHAT YOU ARE DOING FIRST.
; cgi.redirect_status_env = ;
; FastCGI under IIS (on WINNT based OS) supports the ability to impersonate
; security tokens of the calling client. This allows IIS to define the
; security context that the request runs under. mod_fastcgi under Apache
; does not currently support this feature (03/17/2002)
; Set to 1 if running under IIS. Default is zero.
; fastcgi.impersonate = 1;
; cgi.rfc2616_headers configuration option tells PHP what type of headers to
; use when sending HTTP response code. If it's set 0 PHP sends Status: header that
; is supported by Apache. When this option is set to 1 PHP will send
; RFC2616 compliant header.
; Default is zero.
;cgi.rfc2616_headers = 0
; File Uploads ;
; Whether to allow HTTP file uploads.
file_uploads = On
; Temporary directory for HTTP uploaded files (will use system default if not
; specified).
;upload_tmp_dir =
; Maximum allowed size for uploaded files.
upload_max_filesize = 2M
; Fopen wrappers ;
; Whether to allow the treatment of URLs (like http:// or ftp://) as files.
allow_url_fopen = On
; Define the anonymous ftp password (your email address)
;from="[email protected]"
; Define the User-Agent string
; user_agent="PHP"
; Default timeout for socket based streams (seconds)
default_socket_timeout = 60
; If your scripts have to deal with files from Macintosh systems,
; or you are running on a Mac and need to deal with files from
; unix or win32 systems, setting this flag will cause PHP to
; automatically detect the EOL character in those files so that
; fgets() and file() will work regardless of the source of the file.
; auto_detect_line_endings = Off
; Module Settings ;
[Date]
; Defines the default timezone used by the date functions
[Syslog]
; Whether or not to define the various syslog variables (e.g. $LOG_PID,
; $LOG_CRON, etc.). Turning it off is a good idea performance-wise. In
; runtime, you can define these variables by calling define_syslog_variables().
define_syslog_variables = Off
[mail function]
; For Win32 only.
SMTP = localhost
smtp_port = 25
; For Win32 only.
;sendmail_from = [email protected]
; For Unix only. You may supply arguments as well (default: "sendmail -t -i").
;sendmail_path =
; Force the addition of the specified parameters to be passed as extra parameters
; to the sendmail binary. These parameters will always replace the value of
; the 5th parameter to mail(), even in safe mode.
;mail.force_extra_parameters =
[SQL]
sql.safe_mode = Off
[ODBC]
;odbc.default_db = Not yet implemented
;odbc.default_user = Not yet implemented
;odbc.default_pw = Not yet implemented
; Allow or prevent persistent links.
odbc.allow_persistent = On
; Check that a connection is still valid before reuse.
odbc.check_persistent = On
; Maximum number of persistent links. -1 means no limit.
odbc.max_persistent = -1
; Maximum number of links (persistent + non-persistent). -1 means no limit.
odbc.max_links = -1
; Handling of LONG fields. Returns number of bytes to variables. 0 means
; passthru.
odbc.defaultlrl = 4096
; Handling of binary data. 0 means passthru, 1 return as is, 2 convert to char.
; See the documentation on odbc_binmode and odbc_longreadlen for an explanation
; of uodbc.defaultlrl and uodbc.defaultbinmode
odbc.defaultbinmode = 1
[MySQL]
; Allow or prevent persistent links.
mysql.allow_persistent = On
; Maximum number of persistent links. -1 means no limit.
mysql.max_persistent = -1
; Maximum number of links (persistent + non-persistent). -1 means no limit.
mysql.max_links = -1
; Default port number for mysql_connect(). If unset, mysql_connect() will use
; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
; compile-time value defined MYSQL_PORT (in that order). Win32 will only look
; at MYSQL_PORT.
mysql.default_port =
; Default socket name for local MySQL connects. If empty, uses the built-in
; MySQL defaults.
mysql.default_socket =
; Default host for mysql_connect() (doesn't apply in safe mode).
mysql.default_host =
; Default user for mysql_connect() (doesn't apply in safe mode).
mysql.default_user =
; Default password for mysql_connect() (doesn't apply in safe mode).
; Note that this is generally a *bad* idea to store passwords in this file.
; *Any* user with PHP access can run 'echo get_cfg_var("mysql.default_password")
; and reveal this password! And of course, any users with read access to this
; file will be able to reveal the password as well.
mysql.default_password =
; Maximum time (in secondes) for connect timeout. -1 means no limimt
mysql.connect_timeout = 60
; Trace mode. When trace_mode is active (=On), warnings for table/index scans and
; SQL-Errors will be displayed.
mysql.trace_mode = Off
[MySQLI]
; Maximum number of links. -1 means no limit.
mysqli.max_links = -1
; Default port number for mysqli_connect(). If unset, mysqli_connect() will use
; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
; compile-time value defined MYSQL_PORT (in that order). Win32 will only look
; at MYSQL_PORT.
mysqli.default_port = 3306
; Default socket name for local MySQL connects. If empty, uses the built-in
; MySQL defaults.
mysqli.default_socket =
; Default host for mysql_connect() (doesn't apply in safe mode).
mysqli.default_host =
; Default user for mysql_connect() (doesn't apply in safe mode).
mysqli.default_user =
; Default password for mysqli_connect() (doesn't apply in safe mode).
; Note that this is generally a *bad* idea to store passwords in this file.
; *Any* user with PHP access can run 'echo get_cfg_var("mysqli.default_password")
; and reveal this password! And of course, any users with read access to this
; file will be able to reveal the password as well.
mysqli.default_pw =
; Allow or prevent reconnect
mysqli.reconnect = Off
[mSQL]
; Allow or prevent persistent links.
msql.allow_persistent = On
; Maximum number of persistent links. -1 means no limit.
msql.max_persistent = -1
; Maximum number of links (persistent+non persistent). -1 means no limit.
msql.max_links = -1
[PostgresSQL]
; Allow or prevent persistent links.
pgsql.allow_persistent = On
; Detect broken persistent links always with pg_pconnect().
; Auto reset feature requires a little overheads.
pgsql.auto_reset_persistent = Off
; Maximum number of persistent links. -1 means no limit.
pgsql.max_persistent = -1
; Maximum number of links (persistent+non persistent). -1 means no limit.
pgsql.max_links = -1
; Ignore PostgreSQL backends Notice message or not.
; Notice message logging require a little overheads.
pgsql.ignore_notice = 0
; Log PostgreSQL backends Noitce message or not.
; Unless pgsql.ignore_notice=0, module cannot log notice message.
pgsql.log_notice = 0
[Sybase]
; Allow or prevent persistent links.
sybase.allow_persistent = On
; Maximum number of persistent links. -1 means no limit.
sybase.max_persistent = -1
; Maximum number of links (persistent + non-persistent). -1 means no limit.
sybase.max_links = -1
;sybase.interface_file = "/usr/sybase/interfaces"
; Minimum error severity to display.
sybase.min_error_severity = 10
; Minimum message severity to display.
sybase.min_message_severity = 10
; Compatability mode with old versions of PHP 3.0.
; If on, this will cause PHP to automatically assign types to results according
; to their Sybase type, instead of treating them all as strings. This
; compatability mode will probably not stay around forever, so try applying
; whatever necessary changes to your code, and turn it off.
sybase.compatability_mode = Off
[Sybase-CT]
; Allow or prevent persistent links.
sybct.allow_persistent = On
; Maximum number of persistent links. -1 means no limit.
sybct.max_persistent = -1
; Maximum number of links (persistent + non-persistent). -1 means no limit.
sybct.max_links = -1
; Minimum server message severity to display.
sybct.min_server_severity = 10
; Minimum client message severity to display.
sybct.min_client_severity = 10
[dbx]
; returned column names can be converted for compatibility reasons
; possible values for dbx.colnames_case are
; "unchanged" (default, if not set)
; "lowercase"
; "uppercase"
; the recommended default is either upper- or lowercase, but
; unchanged is currently set for backwards compatibility
dbx.colnames_case = "lowercase"
[bcmath]
; Number of decimal digits for all bcmath functions.
bcmath.scale = 0
[browscap]
;browscap = extra/browscap.ini
[Informix]
; Default host for ifx_connect() (doesn't apply in safe mode).
ifx.default_host =
; Default user for ifx_connect() (doesn't apply in safe mode).
ifx.default_user =
; Default password for ifx_connect() (doesn't apply in safe mode).
ifx.default_password =
; Allow or prevent persistent links.
ifx.allow_persistent = On
; Maximum number of persistent links. -1 means no limit.
ifx.max_persistent = -1
; Maximum number of links (persistent + non-persistent). -1 means no limit.
ifx.max_links = -1
; If on, select statements return the contents of a text blob instead of its id.
ifx.textasvarchar = 0
; If on, select statements return the contents of a byte blob instead of its id.
ifx.byteasvarchar = 0
; Trailing blanks are stripped from fixed-length char columns. May help the
; life of Informix SE users.
ifx.charasvarchar = 0
; If on, the contents of text and byte blobs are dumped to a file instead of
; keeping them in memory.
ifx.blobinfile = 0
; NULL's are returned as empty strings, unless this is set to 1. In that case,
; NULL's are returned as string 'NULL'.
ifx.nullformat = 0
[Session]
; Handler used to store/retrieve data.
session.save_handler = files
; Argument passed to save_handler. In the case of files, this is the path
; where data files are stored. Note: Windows users have to change this
; variable in order to use PHP's session functions.
; As of PHP 4.0.1, you can define the path as:
; session.save_path = "N;/path"
; where N is an integer. Instead of storing all the session files in
; /path, what this will do is use subdirectories N-levels deep, and
; store the session data in those directories. This is useful if you
; or your OS have problems with lots of files in one directory, and is
; a more efficient layout for servers that handle lots of sessions.
; NOTE 1: PHP will not create this directory structure automatically.
; You can use the script in the ext/session dir for that purpose.
; NOTE 2: See the section on garbage collection below if you choose to
; use subdirectories for session storage
; The file storage module creates files using mode 600 by default.
; You can change that by using
; session.save_path = "N;MODE;/path"
; where MODE is the octal representation of the mode. Note that this
; does not overwrite the process's umask.
;session.save_path = "/tmp"
; Whether to use cookies.
session.use_cookies = 1
; This option enables administrators to make their users invulnerable to
; attacks which involve passing session ids in URLs; defaults to 0.
; session.use_only_cookies = 1
; Name of the session (used as cookie name).
session.name = PHPSESSID
; Initialize session on request startup.
session.auto_start = 0
; Lifetime in seconds of cookie or, if 0, until browser is restarted.
session.cookie_lifetime = 0
; The path for which the cookie is valid.
session.cookie_path = /
; The domain for which the cookie is valid.
session.cookie_domain =
; Handler used to serialize data. php is the standard serializer of PHP.
session.serialize_handler = php
; Define the probability that the 'garbage collection' process is started
; on every session initialization.
; The probability is calculated by using gc_probability/gc_divisor,
; e.g. 1/100 means there is a 1% chance that the GC process starts
; on each request.
session.gc_probability = 1
session.gc_divisor = 1000
; After this number of seconds, stored data will be seen as 'garbage' and
; cleaned up by the garbage collection process.
session.gc_maxlifetime = 1440
; NOTE: If you are using the subdirectory option for storing session files
; (see session.save_path above), then garbage collection does *not*
; happen automatically. You will need to do your own garbage
; collection through a shell script, cron entry, or some other method.
; For example, the following script would is the equivalent of
; setting session.gc_maxlifetime to 1440 (1440 seconds = 24 minutes):
; cd /path/to/sessions; find -cmin +24 | xargs rm
; PHP 4.2 and less have an undocumented feature/bug that allows you to
; to initialize a session variable in the global scope, albeit register_globals
; is disabled. PHP 4.3 and later will warn you, if this feature is used.
; You can disable the feature and the warning seperately. At this time,
; the warning is only displayed, if bug_compat_42 is enabled.
session.bug_compat_42 = 0
session.bug_compat_warn = 1
; Check HTTP Referer to invalidate externally stored URLs containing ids.
; HTTP_REFERER has to contain this substring for the session to be
; considered as valid.
session.referer_check =
; How many bytes to read from the file.
session.entropy_length = 0
; Specified here to create the session id.
session.entropy_file =
;session.entropy_length = 16
;session.entropy_file = /dev/urandom
; Set to {nocache,private,public,} to determine HTTP caching aspects
; or leave this empty to avoid sending anti-caching headers.
session.cache_limiter = nocache
; Document expires after n minutes.
session.cache_expire = 180
; trans sid support is disabled by default.
; Use of trans sid may risk your users security.
; Use this option with caution.
; - User may send URL contains active session ID
; to other person via. email/irc/etc.
; - URL that contains active session ID may be stored
; in publically accessible computer.
; - User may access your site with the same session ID
; always using URL stored in browser's history or bookmarks.
session.use_trans_sid = 0
; Select a hash function
; 0: MD5 (128 bits)
; 1: SHA-1 (160 bits)
session.hash_function = 0
; Define how many bits are stored in each character when converting
; the binary hash data to something readable.
; 4 bits: 0-9, a-f
; 5 bits: 0-9, a-v
; 6 bits: 0-9, a-z, A-Z, "-", ","
session.hash_bits_per_character = 5
; The URL rewriter will look for URLs in a defined set of HTML tags.
; form/fieldset are special; if you include them here, the rewriter will
; add a hidden <input> field with the info which is otherwise appended
; to URLs. If you want XHTML conformity, remove the form entry.
; Note that all valid entries require a "=", even if no value follows.
url_rewriter.tags = "a=href,area=href,frame=src,input=src,form=fakeentry"
[MSSQL]
; Allow or prevent persistent links.
mssql.allow_persistent = On
; Maximum number of persistent links. -1 means no limit.
mssql.max_persistent = -1
; Maximum number of links (persistent+non persistent). -1 means no limit.
mssql.max_links = -1
; Minimum error severity to display.
mssql.min_error_severity = 10
; Minimum message severity to display.
mssql.min_message_severity = 10
; Compatability mode with old versions of PHP 3.0.
mssql.compatability_mode = Off
; Connect timeout
;mssql.connect_timeout = 5
; Query timeout
;mssql.timeout = 60
; Valid range 0 - 2147483647. Default = 4096.
;mssql.textlimit = 4096
; Valid range 0 - 2147483647. Default = 4096.
;mssql.textsize = 4096
; Limits the number of records in each batch. 0 = all records in one batch.
;mssql.batchsize = 0
; Specify how datetime and datetim4 columns are returned
; On => Returns data converted to SQL server settings
; Off => Returns values as YYYY-MM-DD hh:mm:ss
;mssql.datetimeconvert = On
; Use NT authentication when connecting to the server
mssql.secure_connection = Off
; Specify max number of processes. Default = 25
;mssql.max_procs = 25
[Assertion]
; Assert(expr); active by default.
;assert.active = On
; Issue a PHP warning for each failed assertion.
;assert.warning = On
; Don't bail out by default.
;assert.bail = Off
; User-function to be called if an assertion fails.
;assert.callback = 0
; Eval the expression with current error_reporting(). Set to true if you want
; error_reporting(0) around the eval().
;assert.quiet_eval = 0
[Ingres II]
; Allow or prevent persistent links.
ingres.allow_persistent = On
; Maximum number of persistent links. -1 means no limit.
ingres.max_persistent = -1
; Maximum number of links, including persistents. -1 means no limit.
ingres.max_links = -1
; Default database (format: [node_id::]dbname[/srv_class]).
ingres.default_database =
; Default user.
ingres.default_user =
; Default password.
ingres.default_password =
[Verisign Payflow Pro]
; Default Payflow Pro server.
pfpro.defaulthost = "test-payflow.verisign.com"
; Default port to connect to.
pfpro.defaultport = 443
; Default timeout in seconds.
pfpro.defaulttimeout = 30
; Default proxy IP address (if required).
;pfpro.proxyaddress =
; Default proxy port.
;pfpro.proxyport =
; Default proxy logon.
;pfpro.proxylogon =
; Default proxy password.
;pfpro.proxypassword =
[Sockets]
; Use the system read() function instead of the php_read() wrapper.
sockets.use_system_read = On
[com]
; path to a file containing GUIDs, IIDs or filenames of files with TypeLibs
;com.typelib_file =
; allow Distributed-COM calls
;com.allow_dcom = true
; autoregister constants of a components typlib on com_load()
;com.autoregister_typelib = true
; register constants casesensitive
;com.autoregister_casesensitive = false
; show warnings on duplicate constat registrations
;com.autoregister_verbose = true
[mbstring]
; language for internal character representation.
;mbstring.language = Japanese
; internal/script encoding.
; Some encoding cannot work as internal encoding.
; (e.g. SJIS, BIG5, ISO-2022-*)
;mbstring.internal_encoding = EUC-JP
; http input encoding.
;mbstring.http_input = auto
; http output encoding. mb_output_handler must be
; registered as output buffer to function
;mbstring.http_output = SJIS
; enable automatic encoding translation accoding to
; mbstring.internal_encoding setting. Input chars are
; converted to internal encoding by setting this to On.
; Note: Do _not_ use automatic encoding translation for
; portable libs/applications.
;mbstring.encoding_translation = Off
; automatic encoding detection order.
; auto means
;mbstring.detect_order = auto
; substitute_character used when character cannot be converted
; one from another
;mbstring.substitute_character = none;
; overload(replace) single byte functions by mbstring functions.
; mail(), ereg(), etc are overloaded by mb_send_mail(), mb_ereg(),
; etc. Possible values are 0,1,2,4 or combination of them.
; For example, 7 for overload everything.
; 0: No overload
; 1: Overload mail() function
; 2: Overload str*() functions
; 4: Overload ereg*() functions
;mbstring.func_overload = 0
[FrontBase]
;fbsql.allow_persistent = On
;fbsql.autocommit = On
;fbsql.default_database =
;fbsql.default_database_password =
;fbsql.default_host =
;fbsql.default_password =
;fbsql.default_user = "_SYSTEM"
;fbsql.generate_warnings = Off
;fbsql.max_connections = 128
;fbsql.max_links = 128
;fbsql.max_persistent = -1
;fbsql.max_results = 128
;fbsql.batchSize = 1000
[exif]
; Exif UNICODE user comments are handled as UCS-2BE/UCS-2LE and JIS as JIS.
; With mbstring support this will automatically be converted into the encoding
; given by corresponding encode setting. When empty mbstring.internal_encoding
; is used. For the decode settings you can distinguish between motorola and
; intel byte order. A decode setting cannot be empty.
;exif.encode_unicode = ISO-8859-15
;exif.decode_unicode_motorola = UCS-2BE
;exif.decode_unicode_intel = UCS-2LE
;exif.encode_jis =
;exif.decode_jis_motorola = JIS
;exif.decode_jis_intel = JIS
[Tidy]
; The path to a default tidy configuration file to use when using tidy
;tidy.default_config = /usr/local/lib/php/default.tcfg
; Should tidy clean and repair output automatically?
; WARNING: Do not use this option if you are generating non-html content
; such as dynamic images
tidy.clean_output = Off
[soap]
; Enables or disables WSDL caching feature.
soap.wsdl_cache_enabled=1
; Sets the directory name where SOAP extension will put cache files.
soap.wsdl_cache_dir="/tmp"
; (time to live) Sets the number of second while cached file will be used
; instead of original one.
soap.wsdl_cache_ttl=86400
; Dynamic Extensions ;
; If you wish to have an extension loaded automatically, use the following
; syntax:
; extension=modulename.extension
; For example:
; extension=msql.so
; Note that it should be the name of the module only; no directory information
; needs to go here. Specify the location of the extension with the
; extension_dir directive above.
zend_core_dir="/usr/local/Zend/Core"
zend_gui_password=63a9f0ea7bb98050796b649e85481845
zend_core.default_gui_language=en
zend_gui.ini_modifier_path="/usr/local/Zend/Core"
extension_dir="/usr/local/Zend/Core/lib/php/20060613"
include_path=".:/usr/local/Zend/ZendFramework/library:/usr/local/Zend/Core/share/pear"
zend_extension="/usr/local/Zend/Core/lib/zend/ZendExtensionManager.so"
zend_extension_manager.optimizer="/usr/local/Zend/Core/lib/zend/optimizer"
zend_extension_manager.debug_server="/usr/local/Zend/Core/lib/zend/debugger"
zend_ini_file=/usr/local/Zend/Core/etc/zend.ini
[zend]
extension=apc.so
extension=bcmath.so
;extension=bz2.so
;extension=calendar.so
extension=curl.so
;extension=db2.so
;extension=exif.so
;extension=ftp.so
extension=gd.so
;extension=gettext.so
;extension=gmp.so
;extension=ibm_db2.so
extension=iconv.so
extension=imap.so
;extension=ldap.so
extension=mbstring.so
;extension=mcrypt.so
;extension=memcache.so
;extension=mhash.so
;extension=ming.so
extension=mysql.so
extension=mysqli.so
;extension=oci8.so
;extension=pcntl.so
extension=pdo.so
;extension=pdo_ibm.so
extension=pdo_mysql.so
;extension=pdo_oci.so
extension=pdo_pgsql.so
;extension=pdo_sqlite.so
extension=pgsql.so
;extension=posix.so
;extension=shmop.so
extension=soap.so
;extension=sockets.so
;extension=sqlite.so
;extension=sysvmsg.so
;extension=sysvsem.so
;extension=sysvshm.so
;extension=tidy.so
;extension=tokenizer.so
;extension=xmlreader.so
;extension=xmlrpc.so
extension=xmlwriter.so
;extension=xsl.so
;extension=zip.so
;extension=bz2.so
;extension=calendar.so
;extension=db2.so
;extension=exif.so
;extension=ftp.so
;extension=gettext.so
;extension=gmp.so
;extension=ibm_db2.so
;extension=ldap.so
;extension=mcrypt.so
;extension=memcache.so
;extension=mhash.so
;extension=ming.so
;extension=oci8.so
;extension=pcntl.so
;extension=pdo_ibm.so
;extension=pdo_oci.so
;extension=pdo_sqlite.so
;extension=posix.so
;extension=shmop.so
;extension=sockets.so
;extension=sqlite.so
;extension=sysvmsg.so
;extension=sysvsem.so
;extension=sysvshm.so
;extension=tidy.so
;extension=tokenizer.so
;extension=xmlreader.so
;extension=xmlrpc.so
;extension=xsl.so
;extension=zip.so
Please, tell me what's the reason and what I should do.
Thanks in advance.Hi Garyalbert,
Welcome to Lenovo Community!
I’m sorry to hear that you are facing the issue with No POST on ThinkPad X240.
To resolve the issue I suggest you to perform power drain, to go with power drain option please removing power adapter and battery. Hold the power button for 30 second and then connect only power adapter and try to switch on the system. If the system is switching ON then connect battery and check it once.
Hope this helps!
Best regards,
Hemanth Kumar
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter! -
Problem in setting up Actionable Emails
Hi
Hope you are doing fine
I'm finding problems in setting up Actionable emails in Human Tasks.
The mails are coming fine, with approve/reject buttons, but when I click on either of those buttons and send the email, nothing is hapenning. The same, when done using workspace is working fine.
So I think this is something to do with the configuration.
Before setting up the configuration, I have the foll details
OutgoingMailServer, port
IncomingMailServer, port, userName(say ActionableAccnt), pwd (which I'm using for actionable email)
Here is my setup:
In email driver notification under UMS
Sender Address : [email protected]
Default Sender Address : [email protected]
provided outgoingMailServer, port, incomingMailServer, port, username, pwd
And setting in Workflow Notification Properties
From Address : [email protected]
Actionable Address : [email protected]
ReplyTo Address : [email protected] (this is a dummy address)
Please note that in every emailId entry except the replyToAddress, I've used the same valid emailId [email protected]
Is this ok? I'm ok even if the replyTo and actionable addresses are same.
I've restarted the server. But its not working.
Did I miss something here?
I've gone through the documentation, some blogs, but could not find any.
Would you please help me in this regard.
Thanks in Advance
Regards
RaviKiranHello there.
Here's the ServiceLocator and delegates I am using....
// LoginDelegate.as
package com.myproj.products.business {
import com.myproj.products.vo.LoginVO;
import mx.rpc.IResponder;
import com.adobe.cairngorm.business.ServiceLocator;
public class LoginDelegate {
// anything that implements the IResponder interface can act as a responder
private var responder:IResponder;
private var service:Object;
public function LoginDelegate(responder:IResponder) {
this.responder = responder;
this.service = ServiceLocator.getInstance().getRemoteObject("loginService");
public function login(loginAttempt:LoginVO):void {
// Call the method of service that resides on server
var call:Object = service.login(loginAttempt);
// Send the response to responder
call.addResponder(responder);
// com/myproj/products/business/Services.mxml
<?xml version="1.0" encoding="utf-8"?>
<cairngorm:ServiceLocator
xmlns:mx="http://www.adobe.com/2006/mxml"
xmlns:cairngorm="com.adobe.cairngorm.business.*">
<!-- Login Service -->
<mx:RemoteObject
id="loginService"
destination="zend"
source="LoginService"
showBusyCursor="true">
<mx:method name="doLogin" />
</mx:RemoteObject>
</cairngorm:ServiceLocator>
With kind regards
ShiVik -
Hya,
My name is Bogdan Laurentiu, and i am final year at university.
I have to make a project and my choice was a Web page, made in PHP for a delivery company like DHL for eg.
My question is should i use Zend as well ? If yes why..
What is Zend especialy for?...
Thx, and have a great day.[email protected] wrote:
My question is should i use Zend as well ? If yes why..If you want to pay for a licence then is Zend your option ... it's not free like XE ...
[email protected] wrote:
What is Zend especialy for?...It's a integrated development environment (IDE) for PHP applications.
More about Oracle and PHP including Zend you can find in Wiki:
http://wiki.oracle.com/page/PHP+Oracle+FAQ
Cheers! -
Zend AMF Authentication & Authorization
How do I secure my PHP services created with 'Connect To PHP' wizard?
The web is full of tutorials on connecting to PHP but I found nothing on securing the services.
The 'Connect to PHP' wizard generates a gateway.php which doesn't do authorization.
Do I have to replace this endpoint with my own? Why doesn't Adobe have tutorials on this?
maybe PHP apps are not meant to be safe?I've been struggling with it, and figured it all out - so, perhaps it could help others.
The authentication is called on the server only if credentials supplied from the client (via the remote procedure call headers). This snippet illustrates the setup of custom auth (these are the last 6 lines of gateway.php script):
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
// Handle request
$auth = new My_Amf_Auth(); // authentication
$server->setAuth($auth);
$acl = new Zend_Acl(); // authorization
$server->setAcl($acl);
echo $server->handle();
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Now, your custom auth should extend Zend_Amf_Auth_Abstract. Since I want to authenticate users from a database, I bring the Zend_Auth_Adapter_DbTable to play. But since I cannot extend both Zend_Amf_Auth_Abstract and Zend_Auth_Adapter_DbTable, I use a composition:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
<?php
require_once ('Zend/Amf/Auth/Abstract.php');
* AMF auth class by Danko Kozar, dankokozar.com
* @author dkozar
class My_Amf_Auth extends Zend_Amf_Auth_Abstract {
function __construct() {
public function authenticate() {
$adapter = My_Db_Adapter::getInstance();
$adapter->setIdentity($this->_username);
$adapter->setCredential($this->_password);
// the adapter call
// you can wrap it into try.. catch and process DB connection errors
$result = Zend_Auth::getInstance()->authenticate($adapter);
return $result;
?>
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Here's the adapter class:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
<?php
* DB table adapter auth class for AMF by Danko Kozar, dankokozar.com
* @author dkozar
* Singleton
class My_Db_Adapter extends Zend_Auth_Adapter_DbTable {
protected static $_instance = null;
* private!
* @param My_Db_Adapter $adapter
public function __construct(Zend_Db_Adapter_Abstract $adapter = null) {
if (!$adapter)
$adapter = new Zend_Db_Adapter_Mysqli(
array(
'dbname' => 'test',
'username' => 'root',
'password' => '')
parent::__construct($adapter);
$this
->setTableName('users')
->setIdentityColumn('username')
->setCredentialColumn('password')
// just for testing
// $this
// ->setIdentity('username')
// ->setCredential('password')
* @return My_Db_Adapter
public static function getInstance()
if (null === self::$_instance) {
self::$_instance = new self();
return self::$_instance;
public function authenticate() {
$_authResult = parent::authenticate();
// NOTE: The point is that $result->_identity is an OBJECT (of type stdClass), NOT string
// with Zend_Auth_Adapter_DbTable it is internally accomplished by calling its getResultRowObject() method
// It constructs the stdClass with properties named after table attributes
// $user = new stdClass();
// $user->role = "administrator";
// $user->username = $_authResult->getIdentity();
$identity = $this->getResultRowObject();
$result = new Zend_Auth_Result($_authResult->getCode(), $identity);
return $result;
?>
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
On the Flex side I have an auto-generated class (MyService) which extends another auto-generated class (_Super_MyService).
The point is that the outer one is auto-generated only once (initially), and you can modify it, without worrying to be overwritten on service regeneration.
There's a protected property _serviceControl (which is of type RemoteObject) which could be tweaked if needed.
I'm tweaking it by of setting the endpoint (with string read from a client side config in preInitializeService() method). Plus, I'm adding 2 more methods, which expose setCredentials and setRemoteCredentials methods of _serviceControl, so I can acces it from my code.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
package services.myservice
public class MyService extends _Super_MyService
* Override super.init() to provide any initialization customization if needed.
protected override function preInitializeService():void
super.preInitializeService();
// Initialization customization goes here
_serviceControl.endpoint = "http://localhost/myapp/gateway.php";
public function setCredentials(username:String, password:String, charset:String=null):void
_serviceControl.setCredentials(username, password, charset);
public function setRemoteCredentials(username:String, password:String, charset:String=null):void
_serviceControl.setRemoteCredentials(username, password, charset);
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
So, before calling MyService methods, I'm setting the credentials with setCredentials() method and this runs the authentication on the PHP side:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
private var service:MyService;
service = new MyService(); // ServiceLocator.getInstance().getHTTPService("presetLoader");
service.setCredentials("user1", "pass1");
var token:AsyncToken = service.getData();
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
The authentication via Zend_Amf_Server is, by the way, OPTIONAL! Meaning, with no credentials supplied, Zend_Amf_Server will NOT RUN IT. Thus you should rely on Zend_Acl (e.g. roles) to so your permissions and security!
Finally, here's the MySQL DB table I've been using for authentication:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-- Table structure for table `users`
CREATE TABLE IF NOT EXISTS `users` (
`id` int(11) NOT NULL AUTO_INCREMENT,
`username` varchar(50) NOT NULL,
`password` varchar(32) DEFAULT NULL,
`role` varchar(45) DEFAULT NULL,
`firstname` varchar(50) DEFAULT NULL,
`lastname` varchar(50) DEFAULT NULL,
`email` varchar(255) DEFAULT NULL,
PRIMARY KEY (`id`),
UNIQUE KEY `username` (`username`),
UNIQUE KEY `id_UNIQUE` (`id`)
) ENGINE=InnoDB DEFAULT CHARSET=utf8 AUTO_INCREMENT=2 ;
-- Dumping data for table `users`
INSERT INTO `users` (`id`, `username`, `password`, `role`, `firstname`, `lastname`, `email`) VALUES
(1, 'user1', 'pass1', 'administrator', 'Danko', 'Kozar', NULL);
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Cheers!
Danko -
Zend Framework & Creative Cloud
I am unable to sync certain files to Creative Cloud. See the link below, teh files are from teh Zend Framework. Any ideas/work around for this?
http://www.screencast.com/t/uvQUUOrsTW
GarethThis is an open forum, not a direct link to Adobe support
Please go back to your message #2 with a web browser and remove your personal information so a "web crawler" does not add you to a spam database
If you reply by cell phone or email, be sure you do not include a signature file -
Uploading files using Zend Framework
I am tyring to use the Zend Framework to upload files as outlined in the "Adobe Dreamweaver CS5 with PHP" book by David Powers. I've been using the example code (more or less), and can get it to work perfectly with a local XAMPP installation of Apache and PHP. Howver, I can't get it to work successfully with a hosted site, having tried both GoDaddy and Verio.
The Zend Framework is correctly installed, include paths set correctly (I know this because other Zend FW operations, such as validation work fine). In addition, if the directory I want to upload to isn't correctly specified I get errors on that. But when I try to actually upload a file (again, with code that works on the XAMPP platform), I get nothing. No errors, and no uploaded file.
I have the script set up to send an email with a link to the uploaded file, and the name field is blank (but the email does get sent, again indicating that the ZF is working). I'm concluding I have something incorrectly configured on the hosting plaforms, and am looking for suggestions as what to look at. Thanks.
BTW, checked the permissions on the upload directory, and it should be writeable...David,
Thanks for the reply. I neglected to mention that file upload do work on the server, it's just the Zend FW implementation that doesn't. The Zend FW is basically what is in your book, and nothing happens when I try an upload, but I know that the code is talking to the FW (e.g., if I provide an invalid path, I get the appropraite PHP error). If I don't use the FW it works. So the following code correctly uploads a file on the hosting platform:
if ($_POST['send']) {
//validate the user input
$val = new Zend_Validate_Alnum(TRUE);
if (!$val->isValid($_POST['name'])) {
$errors['name'] = 'Name is required';
$val = new Zend_Validate_EmailAddress();
if (!$val->isValid($_POST['email'])) {
$errors['email'] = 'Email address is required';
$val = new Zend_Validate_StringLength(10);
if (!$val->isValid($_POST['message'])) {
$errors['message'] = 'Required';
if (!$errors) {
foreach($_FILES as $temp_name => $file_array) {
$file_name = str_replace(" ","_",$file_array["name"]);
if (is_uploaded_file($file_array["tmp_name"])) {
move_uploaded_file($file_array["tmp_name"], "$file_dir/".$file_name) or die ("Couldn't copy");
$new_names[] = $file_name;
//start building the mail string
$msg = "Name:\n\t\t".$_POST["name"]."\n";
$msg .= "E-Mail:\n\t\t".$_POST["email"]."\n";
$msg .= "Message:\n\t\t".$_POST["message"]."\n";
foreach ($new_names as $name) {
if ($name != "") {
$msg .= "Link: xxx/uploads/$name"."\n\n";
Using this code I wil email that contains links to the uploaded files, which I can then sucessfully download. So it's the FW code that fails... and note that the Zend validation code above does work correctly; I get errors if invalid entries are made.
Also, I note that my hosting providers only support PHP 5.2.14, whereas on my XAMPP installation I'm using 5.3 Could that be an issue? -
Hi
I am beginner in oracle, I have installed oracle database 10g express and also I have installed Zend Core
But I don’t know where should I start Zend core? Which part is it?
How can I start my php programming and how to make a connection between php and my data base?
Thank you very much
[email protected]Hi,
i'm not sure this is the correct place to post your question.
If you need some info on xe i suggest you to post on xe forum.
Programming through zend and php is another world too.
You should start from docs and use the forum to "share your problems"..
Regards
Acr -
Cannot send email from iPad2 with Shaw
Hi there,
I have issues that I cannot seem to resolve:
I can receive from my shaw account but it sends all outgoing to the Outbox - I've double, triple cheked all incoming and outgoing servers - I even sat with my iPad next to my iMac to make sure everything matched.
it says The sender address "myemailadrees.com" was rejected by the server. even though I recive ok.
Help please??I too have spend countless hours trying to get my iPad 2 to work with my Shaw email. I FINALLY got it to work this morning after about 3 months of trying different "solutions". Here is how I set my POP email account:
Incoming mail server:
Host name: shawmail.ed.shawcable.net (I live in Edmonton)
User name: my shaw email address without the @shaw.ca
Password: my Shaw email password
Outgoing mail server:
Host name: shawmail.ed.shawcable.net (I live in Edmonton)
User name: leave blank
Password: leave blank
Use SSL: off
Server port: 25
This has worked so far for me, so hopefully it will work for others as well. It seems like there is an lot of people on these forums going through the same frustrations. I was able to set both mine and my wife's email accounts on my iPad. -
How can a family share an iPad, specifically, using email? Seperate account
I know, you can have multiple email accounts. i have 3 on my iphone 4. But if my wife, daughter, and I all use the ipad. Can you set up email to ask for what account to load?
Again, i know you can switch after the fact. I am trying to avoid the scenario where I may see my daughter email, or my wife may see mine. Not that we have anything to hide. But if i order flowers or something, i wouldn't want here to inadvertently see the conf email because ipad defaulted to my account.Perhaps consider setting your family up with Gmail accounts. Gmail (Google's email service, even though you probably already knew that) is totally free and has an awesome web interface, especially on the iPad. Then each member of your family could log in/out of their Gmail accounts using mobile Safari.
-
How can I use multiple ipad's on one account without sharing individuals personal email accounts?
Is it possible to have multiple ipads on one account and share info, but also allow the individual users to have personal email that is not seen on the other ipad's? We have all ipads on same icloud account because we all need to see the same ical. It seems like that's the problem. If it IS related to icloud then if we have separate icloud accounts, how would we share the main ical otherwise? Sharing the ical is very important for this business so everyone can access the daily schedule. Of course each user still wants to have private email.
Hope this wasn't too confusing!
Thanks!
Doreenyou could set up the main icloud itunes acount for ical and not have in setup on the devices
and share the calandar with the other itunes accounts on the devices
or only have it on one device
devices have the users indervidual itunes icloud setup
they should be able to access the shared "main" itunes icloud ical account once it's shared
http://howto.cnet.com/8301-11310_39-57542557-285/three-methods-for-sharing-an-ic loud-calendar/
if the devices are company owned you could go futher and setup find my iphone on the main itunes account
and not on the user icloud accounts -
Cannot send email from my Touch (connection to smtp server fails)
Hello,
I have a new iPod Touch with 1.1.4 and the January apps. I am having a problem setting the Mail application.
I am trying to connect to the IMAP/SMTP servers at my university. I am using the exact same settings and passwords I use on my laptop, which works fine. I can receive email fine on my Touch, but every time I try to send one it fails tellings me "the connection to the outgoing server smtp.myuniversity.edu failed".
If I on purpose write a wrong password for the outgoing mail, the error message I get is different ("check the account settings for the outgoing server smtp.myuniversity.edu").
The university IT people confirmed my settings, and told me that there is nothing blocking any handheld device from using the server.
Does anyone know why this would happen?
Thanks,
MarceloThank you very much for your responses
1) the link to mail setup is (sorry, it's quite long)
http://www.knowledgepak.com/kpaksonline/kpol.asp?PiAlias=kpolpi17&k2dockey=04096 3251575739@kpol17&ViewLink=true&SkipHeader=false&printformat=true
2) I am indeed using SSL, as instructed by IT
3) I do use port 587 instead of 25 (25 does not work either)
Any ideas? Thanks again.
MC -
Cannot send email from iPhne 5s
I have just upgrade from iPhone 4 to iPhone 5s. Excited but now I cannot even send any email. No problem receiving.
My setting in my email account is POP, incoming and outgoing mail server is mail.optusnet.com.au which is the same seeting as my previous phone.
Can aynone help? ThanksHi,
Are you getting any error? Perhaps switching TLS/SSL on the SMTP configuration?
I've found this link that may help
https://devicehelp.optus.com.au/web/apple-iphone-5s/functions/messaging/setting- up-my-mobile-phone-for-email/
Edit: correct versino of the link -
Cannot send email from yahoo mail client
I cannot open or send or attach anything to my email in the yahoo mail. I know there's nothing wrong with the email because it works on my laptop, just not on my computer. Could there be a setting problem, or a cookie problem or something?
I also cannot open Bonjour to see my printer settings. Everything was working fine yesterday.outgoing mail server
SMTP - Yahoo! SMTP Server
primary server
Yahoo! SMTP server - ON
server port 465
That's what I have for my yahoo account.
Maybe you are looking for
-
This item is temporarily unavailable. please try again later
I have had a large iTunes library for years. switched many different computers through the years. I buy my first Mac and this is the error that pops up when i try to download my library. I have tried to download to external hard drive and internal
-
I have Acrobat 9.5 and when I try to create>pdf from scanner, it displays an error "Adobe acrobat has stopped working". Is there any way I can use this functionality?
-
I have a small network in my home consisting of an ADSL-modem (-> internet) to which I have an airport Xpress connected (ie the ethernet port of that unit is occupied). I have set the network to DHCP and PW-protected thru WAP. I have extended the NW
-
Stand still and no clue whats happening after ....
Hi This is a puzzling one. I have completed the form. Click on Submit button. The form stands still and no clue whats happening? Please advice. All errors on the page has been resolved. There are none. All the insert to database tables works before b
-
WD Application acting as an initial logon page
Hello experts, is it possible to have a Java Web Dynpro application acting as an initial logon page removing the current standard logon functionality? If yes, where is the mapping done? I changed authschemes.xml accordingly, restarted the server but