Zens - connectivity with car audio systems

Hi - got an odd, obscure question. I have an Audi fitted with the so-called 'Audi Music Interface'. As well as the ubiquitous Ipod connector, this one comes with a mini-USB port to which I have successfully connected a Zen X-fi 32GB and a 2GB Samsung YP-K3. However, when I try to connect my 4GB Zen V+ I get an 'unable to connect' message from the Audi.
The music on all three is from the same source (same file formats etc) so what can be thedifference between the two Zens that prevents one of them from being recognised by the unit's I have usedWMP to transfer the music to all threeMP3 players.
Another oddity - while I'm at it - is that the X-fi doesn't like being undocked from the car and will frequently lock up and require a reset. It will resume working without a problem if left connected iin place.
Any ideas anyone
Paul

OneMoreOne wrote:
Yeh - tried that. Trouble is, it doesn't last. I frequently have to reset the device and, every two or three days, it hangs so completely, I can only get it going again by going into Recovery mode and doing a 'clean up'. This works but not for long.
I've also noticed that the Zen doesn't appear to charge while connected th the car system. The little green battery indicator suggests that it is charging but after 48 hours in the car, the Zen won't start and has to be recharged via my computer
If that player is under warranty I would return it. If not use another method to connect to the car stereo. Unfortunately I don't know enough about the system you have to advise on that. As for the charging I have a USB port on mine & the same thing occurs as it appears to dock & charge except it does not. That I would say has to do with the player itself not that it is a defect of the player. For instance all wall chargers in particular the ones you can plug a usb cord into will not charge a Creative player. I know because I have tried with several different players I own. The fact your stereo is Ipod ready tells me that very well may be why it does not perform as you would expect since the 2 devices are very diiferent.Wish I could be of more help.

Similar Messages

  • Iphone 6 iOS 8.1 no longer playing properly with car audio system

    Hi there,
    I have an iphone 6 running ios 8.1 and it is no longer allowing me to play/pause songs through the car's audio system. I have a USB port in the car that allows me to plug my iphone in and control the Music through the car audio system.
    I have a 2011 Holden Cruze.
    Prior to the iOS upgrade, the function worked fine.
    Bluetooth connectivity is still OK and if I control the music via the iPhone it will play.
    Is anyone else having this issue and are apple aware of it?
    Thanks.

    Hi Darren,
    I'm experiencing the exact same issue with my Volkswagen Golf 2015. Since the update I'm unable to use the play/pause button. When I press the button while my phone is connected through the MDI cable it does nothing. But if I use Bluetooth I can control it without issue. That said, in my car I don't want to use Bluetooth while I'm playing music because I want to charge my iPhone at the same time so I need to use the cable. I think this is a really issue and Apple should advise.
    Update:
    I did a full restore without using a backup of my old phone. Oh surprise... It seems to work now. But the worst now, is that I have this album of U2 showing in my playlist. I don't know if it's related, but that album was not showing when I used my back-up the first time. Seriously, I think Apple succeed at messing up enough with iOS 8.1 and this U2 album to break the playlist and the playback functionality with cars and radios.
    To resolve the issue I tried:
    Restore to iOS 8.1 with back-up - FAILED
    Restore to iOS 8.1 without using any back-up - SUCCEED but fail at the same time because I need to re-setup my iPhone manually and try to get rid of this U2 album.

  • ITouch Firmware Upgrade - Can no longer connect to car audio system

    I just upgraded to 3.1.1 last night on my iTouch and can no loger plug in and connect to the audio system on my Infiniti G35x. The iTouch shows that it is connected by the audio system shows that it isn't. I've checked the cables, etc and all is fine and can connect another iPod without any issues. Thoughts...?

    This is a known issue that started with the 3.0 release, and it affects several auto manufacturers. I was hoping that 3.1.1 would fix this for my Honda, but no dice. Something changed either in the communication protocol or timing, but whose fault it is seems to depend on how many Apple products you own
    You can step back down to the 2.x firmware ... search around for "DFU mode", I did it once and may do it again now that 3.1.1 doesn't solve this.

  • IPhone 5S with ios8 fail to connect my Bluetooth car audio system

    Dear apple users and developers,
    I have read many threads about this issue mostly for iPhone 5 (ok i have the 5S) perhaps this makes a difference. With the ios7 i had no issue and always connected to my MHV-8300BT Pioneer device in my car. After update, when i get connected, i says "Calling My number" and when i push the button on my device to answer it drops the line, it keeps the connection but i do not hear, speak. Then i have to change the source voice system and i set the speaker or the iPhone.
    On my fathers Bluetooth, a Motorola, it works, at the beginning i made a reset only for the Network settings,
    Do not know what else to do
    Thanks for reading my post
    Nikos

    Hi MJM 1,
    If you are having issues pairing your iPhone 5s to your car audio system via Bluetooth, you may find the following articles helpful (the first article also includes instructions on removing paired devices):
    iOS: Third-party Bluetooth accessories
    http://support.apple.com/kb/ht1664
    iOS: Troubleshooting car stereo connections
    http://support.apple.com/kb/ts3581
    Regards,
    - Brenden

  • Trouble with my iPhone 4 (iOS 6.1.2) and car audio system

    I have an strange trouble with my iPhone 4 (iOS 6.1.2) and car audio system (in the Citrioen C4B7). When I connect iPhone to audio by USB dock cable, music by Apple's player is playing, but music from any other program (Pandora, VK, YandexMusic, any internet radio) — is not.
    Of course, it is playing OK through BT or AUX, but I want definetly use USB.
    Any tips/help are welcome

    You must not be accessing YouTube with Google's YouTube app or with a 3rd party YouTube app.

  • How do i use my iPhone to listen to music with an audio system in a car?

    Guys, I tried to use my iPhone to listen to music over my car audio system but the songs are neither being played nor the options to play those songs are displayed.  Please help guys if there's an option available.

    Any options will be in or with the car nothing can be done to an iPhone .The car audio system must be iPhone compatible there are multiple ways of playing an iphone music  through a car stereo just depends on the car set up

  • BB 9360 Curve don´t connect the mass storage to my usb car audio system.

    Hello:
    I´ve got a BB 9360 curve. There is no problem when i connect to my PC, It questions if i want connect mass storage, charge, etc...
    But when i connect it to my USB car audio system, it connects automatically to charge without any message or option to connect to mass storage, and i can not access to my music stored in the memory card.
    Waiting your answers, so many thanks to all.

    Hello xaxu and welcome to the BlackBerry® Support Community Forums.
    Thanks for your question on Mass Storage mode.
    Currently, Mass Storage mode is supported when the BlackBerry® smartphone is connected to a Windows® or Mac® based computer system. 
    Hope this answers your question. 
    Thanks!
    -HMthePirate
    Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

  • Hi, since upgrading to IOS 8.0.2 my iphone 5 no longer connects with the entertainment system in my car? Any ideas?

    Hi, since upgrading to IOS 8.0.2 my iphone 5 no longer connects with the entertainment system in my car? Any ideas?

    So yesterday vibration suddenly started working again, after nearly two weeks with the problem above. I have no idea why, I didn't change any settings and the only app that was updated yesterday was Facebook messenger...

  • My IPOD 7th Generation is not compatible with my cars audio system. I had the IPOD nano 4th generation earlier and it was perfectly working on my car audio system. Is there any way i can make the IPOD Nano 7th generation compatible with my car audio syste

    My IPOD 7th Generation is not compatible with my cars audio system. I had the IPOD nano 4th generation earlier and it was perfectly working on my car audio system. Is there any way i can make the IPOD Nano 7th generation compatible with my car audio system?

    I am assuming you are using the Lightning to 30 pint adapter and it is not working?

  • I tunes synch to Honda car audio system

    How do I synch my playlist in Itunes to my 2011 Honda car audio system using a flash drive?

    Hello abarbes,
    Welcome to Apple Support Communities.
    The article linked below provides troubleshooting tips that’ll resolve issues like the one you’ve described, where your iPhone 6 isn’t able to connect to your car stereo.
    Get help using your iPhone, iPad, or iPod touch with your car stereo - Apple Support
    Take care,
    -Jason

  • IPod shuffle will not connect to car audio

    my 2015 Lexus audio system recognizes my iPod Nano's (6th &7th generation) without any problems via BT or USB; does the 4th gen iPod shuffle have the capability to play through my car's audio system with it's USB cable?

    Probably not, because the iPod shuffle does not have the "standard" iPod dock connector.  It uses the headphones jack as the connection point for data.  Also, the shuffle is designed to be a more limited device, in terms of its interaction capabilities.
    A better choice for connecting to a car audio system is an inexpensive USB flash drive.  You may already have one.  For example, this one barely sticks out of the USB port
    http://eshop.macsales.com/item/SanDisk/SDCZ33016G/
    and has many times the storage capacity of a shuffle.  You can load it with your favorite songs and just leave it connected in the car, instead of constantly connecting and disconnecting an iPod (which causes wear on the iPod).

  • Re: Connection To Home Audio System

    I have currently upgraded my phone to the Nokia N80 which i have to admit is so far the best phone i have ever had to date. The problem i am having is trying to figure out how i can connect my phone to my Technics Audio system. It mentions something about the UPnP technology to be able to do this but so far after hours of searching on the internet i still have found nothing on how this can be done. I got all sorts of extra gadgets with my phone like headset, data cable and 2 other things, one of which is a small cable with the coding CA-44 on it and one of which looks like a bluetooth dongle which connects to your phone and has a small black square on the opposite end. Are these anything to do with how i connect to my audio system or can anyone help me with this matter. Thank you.

    Hi,
    what you can also do that is less complex is get yourself the Nokia Music pack what you need is the Nokia Audio Adapter AD-15: Simply is Pop-Port to phone, 3.5 mm plug to headphones lets you listen to your phone's FM radio or MP3 player through your own standard stereo headphones, compatible car stereo, or audio amplifier
    And ... the Nokia Audio Cable CA-72U: 3.5 mm connector to phone and two RCA connectors to home entertainment system connects your compatible phone to a home stereo system for stereo playback or recording.
    Then you are good to go....
    Check out the Nokia Music pack on http://www.europe.nokia.com/nokia/0,,83227,00.html?s=MusicPack

  • IOS4 does not recognize in car audio systems...awesome!

    So a major glitch with the iOS4 release for iPhone turns out to be the complete inability to interact with hard wired connections to in-car audio systems. As a result, those of us who relied on our iphone music libraries to provide our driving entertainment prior to this latest update, are now completely out of luck. Unless, of course, you count the incessantly flashing warning that "your iphone does not support this accessory" entertaining as opposed to infuriating. This strobe effect has the added bonus of rendering your touch screen completely useless. Good luck if your hard connection provides charging capabilities as well.
    Between the ungodly amount of money spent on iTunes music and my car audio system over the last couple of years, I’m just tickled to death about this world wide technological turn of events. Good job Apple, you really dumped in the bed on this one.

    I see the same problem when plugging my iPod with iOS 4 into my clock radio iPod dock. If i remove it and plug it back in it generally works fine. But it is a bit of a nuisance.

  • IPhone no longer works with car audio

    I'm running a 16 GB 3G-S and it worked wonderfully for my internet music such as Pandora or listening to iHeart radio.
    The unit would sync up easily to both my new car audio systems and everything detected and played beautifully! However, once I upgraded to 4.2.1 the iPhone is no longer detected in "iPod Mode" or either receiver. I either get error codes from the receiver or errors from the iPhone that this is not supported (when it was in 4.1).
    I really loved those features for my frequent long drives. I really hope there is a fix for this problem. I did check with both receiver manufacturers and they maintain their units should work.
    Any thoughts or help is greatly appreciated!

    That is wild! My receiver had problems under 4.1, and I upgraded to 4.2 last night hoping to rectify things. It worked for me, flies through the menus and plays back beautifully again.
    I have a 3GS and a Pioneer deck in the truck.

  • Connecting iPod to audio system on new Honda Accord

    I tried to connect my eight-year-old iPod to the audio system on a new Honda Accord and got the message "Unsupported."  The instructions on how to do this are not complex.  Any idea why my iPod shows up as unsupported, other than its age?  Any solutions?

    Possibly age.  I just looked up "A1136" and that seems to be a 5th gen iPod (the "iPod video").  It's old, but that model was often the cut-off for support (for being supported).  The only way to find out what your car's audio system officially supports is to find the specificaltions.
    If the car audio system has a mini-stereo jack as an aux. audio input, you can connect your iPod from the headphones jack to the aux. input using something like this
    http://www.amazon.com/Monster-iCable-Player-Auxiliary-Input/dp/B002AR5XIK
    For an older iPod, that may be a better way to connect it, because it is simple.  There is no interaction between car system and iPod taking place.  The iPod just needs to play music like always, except it is playing through the car system instead of through your headphones.

Maybe you are looking for

  • Creating a spool for more elements on screen, among others an alv_tree

    Hi everyone, The output of my program consist of an alv_tree and other elements (dynpro-fields). I would like to generate a spool which contains the alv_tree and those other elements. Is it possible to do that? Best Regards, Christian

  • Music app problems in iOS 7

    how to extend the space for 'files names' column in 'songs' tab of Music app? i am so disappointed in iOS7's music app. there are tabs for Artists & Albums in music app, there is no need to allocate artist and album columns in 'Songs' or 'Playlists'

  • Blank slides in slideshow

    I am using photoshop elements 5 to make a slide show.  After previewing it there were many RANDOM slides where the picture was no longer there, just a COMPLETELY BLACK SLIDE.  How do I recover these? I spent a lot of time doing this and someone needs

  • Unrecognized option (gcc) -no_cpprt

    I am doing a fresh installation of 10gR2 (X86) on Oracle Enterprise Linux 4. I have installed all the packages required, and the pre-reqs test passes. However during installation I hit an error on gcc with "unrecognized option" -no_cpprt. Has anyone

  • Group a week data in a few subgroup

    Hi, I have a special requirement that I would like to do it using SQL. Suppose I have the following table: Day    Count 1        5 2        15 3        10 4        31 5        25 6        2 7        5 ------------------------I would like to group the