Zenworks 4.1 user policy fails on xp sp2 machines
Hi,
We are using Zenworks4.1, agent 6. Our user policy used to work when we
have Windows '98 machines. However, they stop working when our machines
now are WinXp SP2.
Can anyone shed some light on this?
Thanks in advance.
jslc
On Sat, 17 Feb 2007 12:23:54 GMT, [email protected] wrote:
> We are using Zenworks4.1, agent 6. Our user policy used to work when we
> have Windows '98 machines. However, they stop working when our machines
> now are WinXp SP2.
which user policy?
where did you configure the user policy? under which tab?
Marcus Breiden
If you are asked to email me information please change -- to - in my e-mail
address.
The content of this mail is my private and personal opinion.
http://www.edu-magic.net
Similar Messages
-
Processing of Group Policy failed - User Policy - Windows 7
OP:
http://social.technet.microsoft.com/Forums/en-US/w7itpronetworking/thread/191f1ee1-a551-446b-9808-ff66a952bb25
When running a gpupdate I get the following message:
Updating Policy...
User policy could not be updated successfully. The following errors were encount
ered:
The processing of Group Policy failed. Windows could not authenticate to the Act
ive Directory service on a domain controller. (LDAP Bind function call failed).
Look in the details tab for error code and description.
Computer Policy update has completed successfully.
To diagnose the failure, review the event log or run GPRESULT /H GPReport.html f
rom the command line to access information about Group Policy results.
This only happens on one computer under a certain account; other accounts work fine and the problem account works fine on other computers. Therefore the problem is located on the Windows 7 computer.
I have tracked it down to an LDAP error code 49.
I tried the MS sollution (http://technet.microsoft.com/en-us/library/cc727283(v=ws.10).aspx) but the credentials are sound.
I can also connect to the DC with LDP.exe fine.
Here are the diagnostic read outs (GPResult was too long to post):
Log Name: System
Source: Microsoft-Windows-GroupPolicy
Date: 2/29/2012 1:56:09 PM
Event ID: 1006
Task Category: None
Level: Error
Keywords:
User: Domain\UserAccount
Computer: Win7-ComputerA.FQDomain
Description:
The processing of Group Policy failed. Windows could not authenticate to the Active Directory service on a domain controller. (LDAP Bind function call failed). Look in the details tab for error code and description.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-GroupPolicy" Guid="{AEA1B4FA-97D1-45F2-A64C-4D69FFFD92C9}" />
<EventID>1006</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>1</Opcode>
<Keywords>0x8000000000000000</Keywords>
<TimeCreated SystemTime="2012-02-29T19:56:09.732842600Z" />
<EventRecordID>32458</EventRecordID>
<Correlation ActivityID="{CECE6DDC-E7CC-4563-8109-E62382F645D4}" />
<Execution ProcessID="984" ThreadID="3688" />
<Channel>System</Channel>
<Computer>Win7-ComputerA.FQDomain</Computer>
<Security UserID="S-1-5-21-416373151-1271962822-2142307910-40105" />
</System>
<EventData>
<Data Name="SupportInfo1">1</Data>
<Data Name="SupportInfo2">5012</Data>
<Data Name="ProcessingMode">0</Data>
<Data Name="ProcessingTimeInMilliseconds">1326</Data>
<Data Name="ErrorCode">49</Data>
<Data Name="ErrorDescription">Invalid Credentials</Data>
<Data Name="DCName">
</Data>
</EventData>
</Event>
Windows IP Configuration
Host Name . . . . . . . . . . . . : WIN7-ComputerA
Primary Dns Suffix . . . . . . . : FQDomain
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : FQDomain
ParentDomain
Ethernet adapter Local Area Connection:
Connection-specific DNS Suffix . : FQDomain
Description . . . . . . . . . . . : Intel(R) 82579LM Gigabit Network Connecti
on
Physical Address. . . . . . . . . : 00-21-CC-5F-CF-DF
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
IPv4 Address. . . . . . . . . . . : 216.71.244.28(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Lease Obtained. . . . . . . . . . : Wednesday, February 29, 2012 12:38:25 PM
Lease Expires . . . . . . . . . . : Thursday, March 01, 2012 12:38:24 PM
Default Gateway . . . . . . . . . : 216.71.244.1
DHCP Server . . . . . . . . . . . : 216.71.244.2
DNS Servers . . . . . . . . . . . : 216.71.244.2
216.71.240.120
216.71.240.132
Primary WINS Server . . . . . . . : 216.71.244.2
Secondary WINS Server . . . . . . : 216.71.240.130
216.71.240.122
NetBIOS over Tcpip. . . . . . . . : Enabled
Wireless LAN adapter Wireless Network Connection:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Intel(R) WiFi Link 1000 BGN
Physical Address. . . . . . . . . : 8C-A9-82-B0-67-E8
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : YesHi,
It sound like port blocking issue, Seems your client system connecting 216.71.240.x DNS Servers as a logon server and which seems on different subnet
as per subnet mask, So there must be a router or firewall in between and so it might be Active directory ports are being blocked.
So first for testing purpose just remove other
216.71.240.x DNS
servers from TCP/IP configuration and clear dns cache
ipconfig/flushdns
and restart the system. check if it works.
or run this command on DC
dcdiag /test:dns
and share the error report.
Cheers!
Sanjay -
ZENworks 6.5 SP1 - User Policy Package problems
I have ZENworks 6.5 SP1. I am trying to apply user policy packages to
control the desktop. We are using Windows XP and from what I can tell,
everything is setup correct, but it doesn't apply at the desktop. We do not
have any AD in our system.
This is the first time we have tried to do this.
Any ideas would be apprecitated.Rhonda Richardson wrote:
> Jared Jennings wrote:
>> rrichardson37,
>>
>>> I don't want the policies to apply to
>>> workstaion because when I (admin) login to the workstation, I want to
>>> have 'Admin' policies not 'User' policies.
>>
>> Ok no problem.
>> Is this with groupPolicies?
>> You are installing the zfdagent.msi correct?
>>
>
> Yes, this is with group policies. I haven't worked on the W2K side yet,
> I am just starting with WXP. the ZEN agents are supposed to be
> installed, I'll have to double check (I didn't build the test network).
> I'll double check and report back.
I have double checked, yes, the 6.5 Agents are installed on the box. As
a little additional information, just to check, I added a Windows
Desktop Preferences setting to the same policy and those settings are
getting to the PC with no problem.
Also, today, when I go in and try to edit the group policy, I get an
error "The Group Policy that you are attempting to edit is currently
being edited by another user. Please try again later."
I deleted the policy today (after I got the error) and tried to
recreate, just to see if I missed a step. I get this same error when I
try to edit the group policy. I restarted all workstation on my test
network, including the management station I am building the policy from. -
The processing of Group Policy failed. Windows attempted to read the file...
Hello all-
I am currently trying to configure group policy (specifically folder redirects) from a new Windows Server 2008 in my home... the server acts as both an AD DS and file server for 4 client computers, all running Windows Vista Ultimate.
Here are the steps I am currently taking:
I create a new Group Policy called All Users and Computers and apply it to the All Users and Computers OU, which contains exactly what it says (all users and computers in the domain).
I verify that a new folder was created in \\<FQDN>\sysvol\<FQDN>\Policies. The new folder created is named {6479C8E0-3134-4B4F-B047-7ADD51684684}
I change the GPO Enforced setting to Enforced.
I attempt to use the gpupdate command to see if the group policy can be updated successfully. In a command prompt, I type gpupdate <enter>. I receive the message 'Updating Policy...' then after about 15 seconds the message 'User Policy update has completed successfully.'
I keep the cmd window open. After about 10 seconds another message apperas which says "Computer policy could not be updated successfully. The following errors were encountered: The processing of Group Policy failed. Windows attempted to read the file \\<FQDN>\sysvol\<FQDN>\Policies\{6AC1786C-016F-11D2-945F-00C04Fb984F9}\gpt.ini from a domain controller and was not successful. Group Policy settings may not be applied until this event is resolved. This issue may be transient and could be caused by one or more of the following:
a) Name Resolution/Network Connectivity to the current domain controller.
b) File Replication Service Latency (a file created on another domain controller has not replicated to the current domain controller).
c) The Distributed File System (DFS) client has been disabled.
To diagnose the failure, review the event log or invoke gpmc.msc to access information about Group Policy results."
I confirm that the error code is #3 using the Event Log, "The system cannot find the file specificed"
Of course the system cannot find the file specified because the folder does not exist in the sysvol folder. I am wondering why Windows is trying to read from this location when it does not exist, and is not the new group policy I created! I have no other group policies linked or enforced to any other OU/Domain/etc. Any help resolving this issue would be greatly appreciated.Hello all and thanks for the help. First a few things:
I understand that the DC should not be running RRAS, but this a simple server being used in aa home environment by 4 users and getting another server just for RRAS would be overkill.
Secondly, I currently have it so that while the router is handling DHCP, I have reserved a fixed IP for the server, so it always has 192.168.1.100. If I were to use the server as the DHCP, what would my hardware configuration have to look like? I currently have the router plugged into the ISP modem, and then server plugged into the router. All other clients connect to the router wirelessly.
Here's the dcdiag output. I tried dcdiag /fix but to no avail.
Directory Server Diagnosis
Performing initial setup:
Trying to find home server...
* Verifying that the local machine KELLERDCFS, is a Directory Server.
Home Server = KELLERDCFS
* Connecting to directory service on server KELLERDCFS.
* Identified AD Forest.
Collecting AD specific global data
* Collecting site info.
Calling ldap_search_init_page(hld,CN=Sites,CN=Configuration,DC=keller-pa,DC=net,LDAP_SCOPE_SUBTREE,(objectCategory=ntDSSiteSettings),.......
The previous call succeeded
Iterating through the sites
Looking at base site object: CN=NTDS Site Settings,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=keller-pa,DC=net
Getting ISTG and options for the site
* Identifying all servers.
Calling ldap_search_init_page(hld,CN=Sites,CN=Configuration,DC=keller-pa,DC=net,LDAP_SCOPE_SUBTREE,(objectClass=ntDSDsa),.......
The previous call succeeded....
The previous call succeeded
Iterating through the list of servers
Getting information for the server CN=NTDS Settings,CN=KELLERDCFS,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=keller-pa,DC=net
objectGuid obtained
InvocationID obtained
dnsHostname obtained
site info obtained
All the info for the server collected
* Identifying all NC cross-refs.
* Found 1 DC(s). Testing 1 of them.
Done gathering initial info.
Doing initial required tests
Testing server: Default-First-Site-Name\KELLERDCFS
Starting test: Connectivity
* Active Directory LDAP Services Check
Determining IP4 connectivity
Determining IP6 connectivity
* Active Directory RPC Services Check
......................... KELLERDCFS passed test Connectivity
Doing primary tests
Testing server: Default-First-Site-Name\KELLERDCFS
Starting test: Advertising
The DC KELLERDCFS is advertising itself as a DC and having a DS.
The DC KELLERDCFS is advertising as an LDAP server
The DC KELLERDCFS is advertising as having a writeable directory
The DC KELLERDCFS is advertising as a Key Distribution Center
The DC KELLERDCFS is advertising as a time server
The DS KELLERDCFS is advertising as a GC.
......................... KELLERDCFS passed test Advertising
Test omitted by user request: CheckSecurityError
Test omitted by user request: CutoffServers
Starting test: FrsEvent
* The File Replication Service Event log test
Skip the test because the event log File Replication Service does not exist.
......................... KELLERDCFS passed test FrsEvent
Starting test: DFSREvent
The DFS Replication Event Log.
......................... KELLERDCFS passed test DFSREvent
Starting test: SysVolCheck
* The File Replication Service SYSVOL ready test
File Replication Service's SYSVOL is ready
......................... KELLERDCFS passed test SysVolCheck
Starting test: KccEvent
* The KCC Event log test
Found no KCC errors in "Directory Service" Event log in the last 15 minutes.
......................... KELLERDCFS passed test KccEvent
Starting test: KnowsOfRoleHolders
Role Schema Owner = CN=NTDS Settings,CN=KELLERDCFS,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=keller-pa,DC=net
Role Domain Owner = CN=NTDS Settings,CN=KELLERDCFS,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=keller-pa,DC=net
Role PDC Owner = CN=NTDS Settings,CN=KELLERDCFS,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=keller-pa,DC=net
Role Rid Owner = CN=NTDS Settings,CN=KELLERDCFS,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=keller-pa,DC=net
Role Infrastructure Update Owner = CN=NTDS Settings,CN=KELLERDCFS,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=keller-pa,DC=net
......................... KELLERDCFS passed test KnowsOfRoleHolders
Starting test: MachineAccount
Checking machine account for DC KELLERDCFS on DC KELLERDCFS.
* SPN found :LDAP/KELLERDCFS.keller-pa.net/keller-pa.net
* SPN found :LDAP/KELLERDCFS.keller-pa.net
* SPN found :LDAP/KELLERDCFS
* SPN found :LDAP/KELLERDCFS.keller-pa.net/KELLER-PA
* SPN found :LDAP/42268b36-801f-4a6d-b162-34f3b01e04bb._msdcs.keller-pa.net
* SPN found :E3514235-4B06-11D1-AB04-00C04FC2DCD2/42268b36-801f-4a6d-b162-34f3b01e04bb/keller-pa.net
* SPN found :HOST/KELLERDCFS.keller-pa.net/keller-pa.net
* SPN found :HOST/KELLERDCFS.keller-pa.net
* SPN found :HOST/KELLERDCFS
* SPN found :HOST/KELLERDCFS.keller-pa.net/KELLER-PA
* SPN found :GC/KELLERDCFS.keller-pa.net/keller-pa.net
......................... KELLERDCFS passed test MachineAccount
Starting test: NCSecDesc
* Security Permissions check for all NC's on DC KELLERDCFS.
* Security Permissions Check for
DC=ForestDnsZones,DC=keller-pa,DC=net
(NDNC,Version 3)
* Security Permissions Check for
DC=DomainDnsZones,DC=keller-pa,DC=net
(NDNC,Version 3)
* Security Permissions Check for
CN=Schema,CN=Configuration,DC=keller-pa,DC=net
(Schema,Version 3)
* Security Permissions Check for
CN=Configuration,DC=keller-pa,DC=net
(Configuration,Version 3)
* Security Permissions Check for
DC=keller-pa,DC=net
(Domain,Version 3)
......................... KELLERDCFS passed test NCSecDesc
Starting test: NetLogons
* Network Logons Privileges Check
Verified share \\KELLERDCFS\netlogon
Verified share \\KELLERDCFS\sysvol
......................... KELLERDCFS passed test NetLogons
Starting test: ObjectsReplicated
KELLERDCFS is in domain DC=keller-pa,DC=net
Checking for CN=KELLERDCFS,OU=Domain Controllers,DC=keller-pa,DC=net in domain DC=keller-pa,DC=net on 1 servers
Object is up-to-date on all servers.
Checking for CN=NTDS Settings,CN=KELLERDCFS,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=keller-pa,DC=net in domain CN=Configuration,DC=keller-pa,DC=net on 1 servers
Object is up-to-date on all servers.
......................... KELLERDCFS passed test ObjectsReplicated
Test omitted by user request: OutboundSecureChannels
Starting test: Replications
* Replications Check
* Replication Latency Check
......................... KELLERDCFS passed test Replications
Starting test: RidManager
* Available RID Pool for the Domain is 1600 to 1073741823
* KELLERDCFS.keller-pa.net is the RID Master
* DsBind with RID Master was successful
* rIDAllocationPool is 1100 to 1599
* rIDPreviousAllocationPool is 1100 to 1599
* rIDNextRID: 1111
......................... KELLERDCFS passed test RidManager
Starting test: Services
* Checking Service: EventSystem
* Checking Service: RpcSs
* Checking Service: NTDS
* Checking Service: DnsCache
* Checking Service: DFSR
* Checking Service: IsmServ
* Checking Service: kdc
* Checking Service: SamSs
* Checking Service: LanmanServer
* Checking Service: LanmanWorkstation
* Checking Service: w32time
* Checking Service: NETLOGON
......................... KELLERDCFS passed test Services
Starting test: SystemLog
* The System Event log test
An Error Event occurred. EventID: 0x00000422
Time Generated: 07/07/2009 17:53:59
Event String:
The processing of Group Policy failed. Windows attempted to read the file \\keller-pa.net\sysvol\keller-pa.net\Policies\{6AC1786C-016F-11D2-945F-00C04FB984F9}\gpt.ini from a domain controller and was not successful. Group Policy settings may not be applied until this event is resolved. This issue may be transient and could be caused by one or more of the following:
a) Name Resolution/Network Connectivity to the current domain controller.
b) File Replication Service Latency (a file created on another domain controller has not replicated to the current domain controller).
c) The Distributed File System (DFS) client has been disabled.
An Error Event occurred. EventID: 0x00000422
Time Generated: 07/07/2009 17:59:02
Event String:
The processing of Group Policy failed. Windows attempted to read the file \\keller-pa.net\sysvol\keller-pa.net\Policies\{6AC1786C-016F-11D2-945F-00C04FB984F9}\gpt.ini from a domain controller and was not successful. Group Policy settings may not be applied until this event is resolved. This issue may be transient and could be caused by one or more of the following:
a) Name Resolution/Network Connectivity to the current domain controller.
b) File Replication Service Latency (a file created on another domain controller has not replicated to the current domain controller).
c) The Distributed File System (DFS) client has been disabled.
An Error Event occurred. EventID: 0x00000422
Time Generated: 07/07/2009 18:04:04
Event String:
The processing of Group Policy failed. Windows attempted to read the file \\keller-pa.net\sysvol\keller-pa.net\Policies\{6AC1786C-016F-11D2-945F-00C04FB984F9}\gpt.ini from a domain controller and was not successful. Group Policy settings may not be applied until this event is resolved. This issue may be transient and could be caused by one or more of the following:
a) Name Resolution/Network Connectivity to the current domain controller.
b) File Replication Service Latency (a file created on another domain controller has not replicated to the current domain controller).
c) The Distributed File System (DFS) client has been disabled.
An Error Event occurred. EventID: 0x00000422
Time Generated: 07/07/2009 18:09:06
Event String:
The processing of Group Policy failed. Windows attempted to read the file \\keller-pa.net\sysvol\keller-pa.net\Policies\{6AC1786C-016F-11D2-945F-00C04FB984F9}\gpt.ini from a domain controller and was not successful. Group Policy settings may not be applied until this event is resolved. This issue may be transient and could be caused by one or more of the following:
a) Name Resolution/Network Connectivity to the current domain controller.
b) File Replication Service Latency (a file created on another domain controller has not replicated to the current domain controller).
c) The Distributed File System (DFS) client has been disabled.
An Error Event occurred. EventID: 0x00000422
Time Generated: 07/07/2009 18:14:08
Event String:
The processing of Group Policy failed. Windows attempted to read the file \\keller-pa.net\sysvol\keller-pa.net\Policies\{6AC1786C-016F-11D2-945F-00C04FB984F9}\gpt.ini from a domain controller and was not successful. Group Policy settings may not be applied until this event is resolved. This issue may be transient and could be caused by one or more of the following:
a) Name Resolution/Network Connectivity to the current domain controller.
b) File Replication Service Latency (a file created on another domain controller has not replicated to the current domain controller).
c) The Distributed File System (DFS) client has been disabled.
An Error Event occurred. EventID: 0x00000422
Time Generated: 07/07/2009 18:19:10
Event String:
The processing of Group Policy failed. Windows attempted to read the file \\keller-pa.net\sysvol\keller-pa.net\Policies\{6AC1786C-016F-11D2-945F-00C04FB984F9}\gpt.ini from a domain controller and was not successful. Group Policy settings may not be applied until this event is resolved. This issue may be transient and could be caused by one or more of the following:
a) Name Resolution/Network Connectivity to the current domain controller.
b) File Replication Service Latency (a file created on another domain controller has not replicated to the current domain controller).
c) The Distributed File System (DFS) client has been disabled.
An Error Event occurred. EventID: 0x00000422
Time Generated: 07/07/2009 18:24:12
Event String:
The processing of Group Policy failed. Windows attempted to read the file \\keller-pa.net\sysvol\keller-pa.net\Policies\{6AC1786C-016F-11D2-945F-00C04FB984F9}\gpt.ini from a domain controller and was not successful. Group Policy settings may not be applied until this event is resolved. This issue may be transient and could be caused by one or more of the following:
a) Name Resolution/Network Connectivity to the current domain controller.
b) File Replication Service Latency (a file created on another domain controller has not replicated to the current domain controller).
c) The Distributed File System (DFS) client has been disabled.
An Error Event occurred. EventID: 0x00000422
Time Generated: 07/07/2009 18:29:15
Event String:
The processing of Group Policy failed. Windows attempted to read the file \\keller-pa.net\sysvol\keller-pa.net\Policies\{6AC1786C-016F-11D2-945F-00C04FB984F9}\gpt.ini from a domain controller and was not successful. Group Policy settings may not be applied until this event is resolved. This issue may be transient and could be caused by one or more of the following:
a) Name Resolution/Network Connectivity to the current domain controller.
b) File Replication Service Latency (a file created on another domain controller has not replicated to the current domain controller).
c) The Distributed File System (DFS) client has been disabled.
An Error Event occurred. EventID: 0x00000422
Time Generated: 07/07/2009 18:34:17
Event String:
The processing of Group Policy failed. Windows attempted to read the file \\keller-pa.net\sysvol\keller-pa.net\Policies\{6AC1786C-016F-11D2-945F-00C04FB984F9}\gpt.ini from a domain controller and was not successful. Group Policy settings may not be applied until this event is resolved. This issue may be transient and could be caused by one or more of the following:
a) Name Resolution/Network Connectivity to the current domain controller.
b) File Replication Service Latency (a file created on another domain controller has not replicated to the current domain controller).
c) The Distributed File System (DFS) client has been disabled.
An Error Event occurred. EventID: 0x00000422
Time Generated: 07/07/2009 18:39:19
Event String:
The processing of Group Policy failed. Windows attempted to read the file \\keller-pa.net\sysvol\keller-pa.net\Policies\{6AC1786C-016F-11D2-945F-00C04FB984F9}\gpt.ini from a domain controller and was not successful. Group Policy settings may not be applied until this event is resolved. This issue may be transient and could be caused by one or more of the following:
a) Name Resolution/Network Connectivity to the current domain controller.
b) File Replication Service Latency (a file created on another domain controller has not replicated to the current domain controller).
c) The Distributed File System (DFS) client has been disabled.
The processing of Group Policy failed. Windows attempted to read the file \\keller-pa.net\sysvol\keller-pa.net\Policies\{6AC1786C-016F-11D2-945F-00C04FB984F9}\gpt.ini from a domain controller and was not successful. Group Policy settings may not be applied until this event is resolved. This issue may be transient and could be caused by one or more of the following:
a) Name Resolution/Network Connectivity to the current domain controller.
b) File Replication Service Latency (a file created on another domain controller has not replicated to the current domain controller).
c) The Distributed File System (DFS) client has been disabled.
An Error Event occurred. EventID: 0x00000422
Time Generated: 07/07/2009 18:49:23
Event String:
The processing of Group Policy failed. Windows attempted to read the file \\keller-pa.net\sysvol\keller-pa.net\Policies\{6AC1786C-016F-11D2-945F-00C04FB984F9}\gpt.ini from a domain controller and was not successful. Group Policy settings may not be applied until this event is resolved. This issue may be transient and could be caused by one or more of the following:
a) Name Resolution/Network Connectivity to the current domain controller.
b) File Replication Service Latency (a file created on another domain controller has not replicated to the current domain controller).
c) The Distributed File System (DFS) client has been disabled.
......................... KELLERDCFS failed test SystemLog
Test omitted by user request: Topology
Test omitted by user request: VerifyEnterpriseReferences
Starting test: VerifyReferences
The system object reference (serverReference)
CN=KELLERDCFS,OU=Domain Controllers,DC=keller-pa,DC=net and backlink
on
CN=KELLERDCFS,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=keller-pa,DC=net
are correct.
The system object reference (serverReferenceBL)
CN=KELLERDCFS,CN=Topology,CN=Domain System Volume,CN=DFSR-GlobalSettings,CN=System,DC=keller-pa,DC=net
and backlink on
CN=NTDS Settings,CN=KELLERDCFS,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=keller-pa,DC=net
are correct.
......................... KELLERDCFS passed test VerifyReferences
Test omitted by user request: VerifyReplicas
Test omitted by user request: DNS
Test omitted by user request: DNS
Running partition tests on : ForestDnsZones
Starting test: CheckSDRefDom
......................... ForestDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... ForestDnsZones passed test
CrossRefValidation
Running partition tests on : DomainDnsZones
Starting test: CheckSDRefDom
......................... DomainDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... DomainDnsZones passed test
CrossRefValidation
Running partition tests on : Schema
Starting test: CheckSDRefDom
......................... Schema passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Schema passed test CrossRefValidation
Running partition tests on : Configuration
Starting test: CheckSDRefDom
......................... Configuration passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Configuration passed test CrossRefValidation
Running partition tests on : keller-pa
Starting test: CheckSDRefDom
......................... keller-pa passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... keller-pa passed test CrossRefValidation
Running enterprise tests on : keller-pa.net
Test omitted by user request: DNS
Test omitted by user request: DNS
Starting test: LocatorCheck
GC Name: \\KELLERDCFS.keller-pa.net
Locator Flags: 0xe00013fd
PDC Name: \\KELLERDCFS.keller-pa.net
Locator Flags: 0xe00013fd
Time Server Name: \\KELLERDCFS.keller-pa.net
Locator Flags: 0xe00013fd
Preferred Time Server Name: \\KELLERDCFS.keller-pa.net
Locator Flags: 0xe00013fd
KDC Name: \\KELLERDCFS.keller-pa.net
Locator Flags: 0xe00013fd
......................... keller-pa.net passed test LocatorCheck
Starting test: Intersite
Skipping site Default-First-Site-Name, this site is outside the scope
provided by the command line arguments provided.
......................... keller-pa.net passed test Intersite
Here's the nslookup from Vista client:
Microsoft Windows [Version 6.0.6001]
Copyright (c) 2006 Microsoft Corporation. All rights reserved.
C:\Users\Andrew>nslookup KELLERDCFS
Server: UnKnown
Address: 192.168.1.100
Name: KELLERDCFS.keller-pa.net
Addresses: 192.168.1.150
192.168.1.100
C:\Users\Andrew>
Thanks again! -
Processing of Group Policy Failed - Single DC error 1058
I have been getting the error every 5 mins for awhile:
The processing of Group Policy failed. Windows attempted to read the file \\xx.company\sysvol\xxx.company\Policies\{0000000-2323-2222-2222-333333}\gpt.ini from a domain controller and was not successful. Group Policy settings may not be applied until this
event is resolved. This issue may be transient and could be caused by one or more of the following:
a) Name Resolution/Network Connectivity to the current domain controller.
b) File Replication Service Latency (a file created on another domain controller has not replicated to the current domain controller).
c) The Distributed File System (DFS) client has been disabled.
So - this is a single DC 2008R2. It started (I think) back when I joined another server on the domain and did a DCPromo to help build some redundancy. DFS was/is not enabled, do I need to set this up to resolve this?
User are able to login and policy are working, I only see this error on the DC, but other than the error everything seems to be working fine. I can access the share \\xx.company\sysvol\xxx.company\Policies\ and see it from all systems on the domain.
I looked for the Burflags to see if that would help but since there is no DFS there was nothing in the registry.
So at this point, I removed the secondary server via DCpromo, going back to just the 1 server DC but I still get the error. DNS works. When I do a DCDiag everything looks ok except the SysVol - I get about 10 of these
Starting test: SystemLog
An error event occurred. EventID: 0x00000422
Time Generated: 03/17/2015 14:49:41
Event String:
The processing of Group Policy failed... blah blah - same as above.
I looked at this link because of the combination of the 2 errors - Error 1058 and 00422 but its suggesting Authoritative restore, but I don't have the replication.
Now I am wondering if there is a left over connection somewhere in the system that doesn't know that there isn't another DC on the network?
So - any suggestions? Thanks in advance.Hi,
>>Now I am wondering if there is a left over connection somewhere in the system that doesn't know that there isn't another DC on the network?
Did we clean up the metadata of the removed domain controller? If not, we can follow the article below to do this.
Clean Up Server Metadata
https://technet.microsoft.com/en-us/library/cc816907(v=ws.10).aspx
Besides, on the existing domain controller, check Applications and Services Logs\FRS or DFSR logs in Event Viewer. If the issue persists, we can follow the method below to do an authoritative restore for Sysvol.
If we use FRS to replicate Sysvol, we can try to follow the article below to an authoritative restore for Sysvol.
Using the BurFlags registry key to reinitialize File Replication Service replica sets
https://support.microsoft.com/en-us/kb/290762
If we use DFSR to replicate Sysvol, we can try to follow the article below to do an authoritative restore for Sysvol.
How to force an authoritative and non-authoritative synchronization for DFSR-replicated SYSVOL (like "D4/D2" for FRS)
https://support.microsoft.com/en-us/kb/2218556
Best regards,
Frank Shen
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] -
The processing of Group Policy failed because of lack of network connectivity to a domain controller
We are setting up a new AD environment with one AD/DC running DNS services, and a secondary DNS server configured with secondary zone. The problem is that none of the machines in the the domain are getting GPO.
When I run a gpupdate /force from a machine, I get the following output:
"Updating Policy...
User Policy update has completed successfully.
Computer policy could not be updated successfully. The following errors were enc
ountered:
The processing of Group Policy failed because of lack of network connectivity to
a domain controller. This may be a transient condition. A success message would
be generated once the machine gets connected to the domain controller and Group
Policy has succesfully processed. If you do not see a success message for sever
al hours, then contact your administrator.
To diagnose the failure, review the event log or run GPRESULT /H GPReport.html f
rom the command line to access information about Group Policy results."
While the system event log outputs the following:
"The processing of Group Policy failed because of lack of network connectivity to a domain controller. This may be a transient condition. A success message would be generated once the machine gets connected to the domain controller and Group Policy
has succesfully processed. If you do not see a success message for several hours, then contact your administrator."
All the machines that were joined to the domain are able to resolve in forward and reverse lookups, ping the DC and ping each other so I dont understand how the error can be resolved.
Here are few things I have tried:
1. I came across this KB which checked ok for me: http://support.microsoft.com/kb/241515
2. Made a copy of the default GPO, applied to a OU with one machine, and made sure to remove any GPO links from above
3. Enabled the following two local Group policies on a test member:
GP slow link detection
Startup policy processing wait time
4. Modified firewall to allow everything on both member and DC
5. Verified DSN logs, SRV records, access to sysvol ( added authenticated users to sysvol)
I have yet to figure out the reason for this issue. Has anyone seen anything like this before?1. I checked the NIC, it only has one IP. and I followed your article. I set the primary DNS to its own IP and the secondary DNS to the loopback ip
2. This is a new DC and DNS server. I dont have old records yet. I also check the DNS event logs. No errors
3. I made sure the member server is pointing only to the only DC/DNS server
4. Here is the output from the dcdiag.... everything passed except, the Netlogons part. I'm not sure what means or how to fix it yet:
Starting test: NetLogons
* Warning BUILTIN\Administrators did not have the "Access this
computer
"* from network" right.
[hostname] An net use or LsaPolicy operation failed with error
1, Incorrect function..
......................... hostname failed test NetLogons
Complete output:
> hostname
Server: hostname.domain.local
Address: X.X.X.95
> ^C
C:\Windows\system32>
C:\Windows\system32>nslookup
> set type=all
>
>
>
> _ldap._tcp.dc._msdcs.domainname
_ldap._tcp.dc._msdcs.domain.local SRV service location:
priority = 0
weight = 100
port = 389
svr hostname = hostname.domain.local
hostname.domain.local internet address = X.X.X.95
> ^C
C:\Windows\system32>cd ..
C:\Windows>cd SYSVOL
C:\Windows\SYSVOL>cd sysvol
C:\Windows\SYSVOL\sysvol>dir
Volume in drive C has no label.
Volume Serial Number is F624-CDB2
Directory of C:\Windows\SYSVOL\sysvol
10/29/2014 08:25 PM <DIR> .
10/29/2014 08:25 PM <DIR> ..
10/29/2014 08:25 PM <JUNCTION> domain.local [C:\Windows\SYSVOL\domain]
0 File(s) 0 bytes
3 Dir(s) 63,971,037,184 bytes free
C:\Windows\SYSVOL\sysvol>dcdiag
Directory Server Diagnosis
Performing initial setup:
Trying to find home server...
Home Server = hostname
* Identified AD Forest.
Done gathering initial info.
Doing initial required tests
Testing server: Default-First-Site-Name\hostname
Starting test: Connectivity
......................... hostname passed test Connectivity
Doing primary tests
Testing server: Default-First-Site-Name\hostname
Starting test: Advertising
......................... hostname passed test Advertising
Starting test: FrsEvent
......................... hostname passed test FrsEvent
Starting test: DFSREvent
......................... hostname passed test DFSREvent
Starting test: SysVolCheck
......................... hostname passed test SysVolCheck
Starting test: KccEvent
......................... hostname passed test KccEvent
Starting test: KnowsOfRoleHolders
......................... hostname passed test
KnowsOfRoleHolders
Starting test: MachineAccount
......................... hostname passed test MachineAccount
Starting test: NCSecDesc
......................... hostname passed test NCSecDesc
Starting test: NetLogons
* Warning BUILTIN\Administrators did not have the "Access this
computer
"* from network" right.
[hostname] An net use or LsaPolicy operation failed with error
1, Incorrect function..
......................... hostname failed test NetLogons
Starting test: ObjectsReplicated
......................... hostname passed test
ObjectsReplicated
Starting test: Replications
......................... hostname passed test Replications
Starting test: RidManager
......................... hostname passed test RidManager
Starting test: Services
......................... hostname passed test Services
Starting test: SystemLog
A warning event occurred. EventID: 0x000003F6
Time Generated: 03/04/2015 18:23:06
Event String:
Name resolution for the name ctldl.windowsupdate.com timed out after
none of the configured DNS servers responded.
......................... hostname passed test SystemLog
Starting test: VerifyReferences
......................... hostname passed test VerifyReferences
Running partition tests on : ForestDnsZones
Starting test: CheckSDRefDom
......................... ForestDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... ForestDnsZones passed test
CrossRefValidation
Running partition tests on : DomainDnsZones
Starting test: CheckSDRefDom
......................... DomainDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... DomainDnsZones passed test
CrossRefValidation
Running partition tests on : Schema
Starting test: CheckSDRefDom
......................... Schema passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Schema passed test CrossRefValidation
Running partition tests on : Configuration
Starting test: CheckSDRefDom
......................... Configuration passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Configuration passed test CrossRefValidation
Running partition tests on : emcdsm
Starting test: CheckSDRefDom
......................... emcdsm passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... emcdsm passed test CrossRefValidation
Running enterprise tests on : domain.local
Starting test: LocatorCheck
......................... domain.local passed test LocatorCheck
Starting test: Intersite
......................... domain.local passed test Intersite
C:\Windows\SYSVOL\sysvol> -
Skipping request for user policy assignments due to agent configuration for authority
Hello all,
Symptoms:
The Configuration Manager only shows the following actions:
Application Deployment Evaluation Cycle
Machine Policy Retrieval & Evaluation Cycle
Software Updates Deployment Evaluation Cycle
User Policy Retrieval & Evaluation Cycle
In Software Center there are no applications visible. Also the default 'IT Organization' is shown instead of the 'real' name.
The Confugration Manager:
shows in the tab 'General' the correct Management point. Connection type is 'currently intranet' (ok)
shows in the tab 'Site' the correct site code.
shows in the tab 'Components' all components as either 'installed' or 'enabled'. Only CCM Notification Agent shows 'Disabled'.
In SCCM 2012 under 'Client Settings' -> 'Default Settings' -> 'Client Policy' the setting 'Enable User policy on clients' has been enabled.
Done so far (without success):
Re-installed the MP
Run a query on the SCCM Database to check if there are any corrupt records. There are not.
Installed version 5.00.7958.1000
CCM Framework: 5.00.7958.1203
The computer is installed with a task sequence. There is a reboot after 'Setup Windows and ConfigMgr (CM2012 R2 CU1)'.
Installation command of the SCCM Client (during OSD deployment):
SMSCACHEFLAGS=PERCENTDISKSPACE SMSCACHESIZE=10 SMSSLP=demo-sccm.demoforest.local SMSMP=demo-sccm.demoforest.local PATCH="%_SMSTSMDataPath%\OSD\TDS00020\KB2938441\configmgr2012ac-r2-kb2938441-i386.msp"
Content log files on the client:
PolicyAgent.log:
Processing PreShutdown event PolicyAgent_RequestAssignments 8/4/2014 11:56:52 PM 2204 (0x089C)
Processing PostStartup event PolicyAgent_RequestAssignments 8/4/2014 11:57:37 PM 2436 (0x0984)
Policy Download Endpoint's message queue is empty; proceeding with maintenance work PolicyAgent_Cleanup 8/4/2014 11:57:37 PM 2436 (0x0984)
Registered for MP notifications. PolicyAgent_PostStartup 8/4/2014 11:57:37 PM 2436 (0x0984)
Not rerequesting policy on site code change in provisioning mode. PolicyAgent_ReRequestPolicy 8/5/2014 12:01:55 AM 3212 (0x0C8C)
Processing PostStartup event PolicyAgent_RequestAssignments 8/5/2014 12:02:48 AM 2352 (0x0930)
Policy Download Endpoint's message queue is empty; proceeding with maintenance work PolicyAgent_Cleanup 8/5/2014 12:02:48 AM 2352 (0x0930)
Registered for MP notifications. PolicyAgent_PostStartup 8/5/2014 12:02:48 AM 2352 (0x0930)
Processing PostStartup event PolicyAgent_RequestAssignments 8/5/2014 12:11:36 AM 2720 (0x0AA0)
Policy Download Endpoint's message queue is empty; proceeding with maintenance work PolicyAgent_Cleanup 8/5/2014 12:11:36 AM 2720 (0x0AA0)
Registered for MP notifications. PolicyAgent_PostStartup 8/5/2014 12:11:36 AM 2720 (0x0AA0)
Processing PostStartup event PolicyAgent_RequestAssignments 8/5/2014 1:25:02 AM 3164 (0x0C5C)
Policy Download Endpoint's message queue is empty; proceeding with maintenance work PolicyAgent_Cleanup 8/5/2014 1:25:02 AM 3164 (0x0C5C)
Registered for MP notifications. PolicyAgent_PostStartup 8/5/2014 1:25:02 AM 3164 (0x0C5C)
Processing PostStartup event PolicyAgent_RequestAssignments 8/5/2014 1:26:05 AM 2652 (0x0A5C)
Policy Download Endpoint's message queue is empty; proceeding with maintenance work PolicyAgent_Cleanup 8/5/2014 1:26:05 AM 2652 (0x0A5C)
Registered for MP notifications. PolicyAgent_PostStartup 8/5/2014 1:26:05 AM 2652 (0x0A5C)
Triggered update of user S-1-5-21-1840543543-1948091412-3654635223-1109 settings PolicyAgent_RequestAssignments 8/5/2014 9:00:57 AM 3232 (0x0CA0)
Requesting User policy assignments for 'S-1-5-21-1840543543-1948091412-3654635223-1109' PolicyAgent_RequestAssignments 8/5/2014 9:02:34 AM 2484 (0x09B4)
Requesting User policy from authority 'SMS:TDS' PolicyAgent_RequestAssignments 8/5/2014 9:02:34 AM 2484 (0x09B4)
Skipping request for user policy assignments due to agent configuration for authority 'SMS:TDS'. PolicyAgent_RequestAssignments 8/5/2014 9:02:34 AM 2484 (0x09B4)
ClientIDManagerStartup.log:
[----- STARTUP -----] ClientIDManagerStartup 8/5/2014 1:24:34 AM 372 (0x0174)
Read SMBIOS (encoded): 31003800300035002D0030003700310038002D0035003700330038002D0035003500350033002D0034003800350030002D0038003000390030002D0032003800 ClientIDManagerStartup 8/5/2014 1:24:52 AM 2932 (0x0B74)
Evaluated SMBIOS (encoded): 31003800300035002D0030003700310038002D0035003700330038002D0035003500350033002D0034003800350030002D0038003000390030002D0032003800 ClientIDManagerStartup 8/5/2014 1:24:52 AM 2932 (0x0B74)
No SMBIOS Changed ClientIDManagerStartup 8/5/2014 1:24:52 AM 2932 (0x0B74)
SMBIOS unchanged ClientIDManagerStartup 8/5/2014 1:24:52 AM 2932 (0x0B74)
SID unchanged ClientIDManagerStartup 8/5/2014 1:24:52 AM 2932 (0x0B74)
HWID unchanged ClientIDManagerStartup 8/5/2014 1:24:53 AM 2932 (0x0B74)
GetSystemEnclosureChassisInfo: IsFixed=TRUE, IsLaptop=FALSE ClientIDManagerStartup 8/5/2014 1:24:53 AM 2932 (0x0B74)
Windows To Go requires a minimum operating system of Windows 8 ClientIDManagerStartup 8/5/2014 1:24:53 AM 2932 (0x0B74)
Computed HardwareID=2:0760033F87CBB92FC5D6343C630C99002655F937
Win32_SystemEnclosure.SerialNumber=1805-0718-5738-5553-4850-8090-28
Win32_SystemEnclosure.SMBIOSAssetTag=2522-6626-0190-0004-7023-0906-91
Win32_BaseBoard.SerialNumber=1805-0718-5738-5553-4850-8090-28
Win32_BIOS.SerialNumber=1805-0718-5738-5553-4850-8090-28
Win32_NetworkAdapterConfiguration.MACAddress=00:15:5D:00:2A:0C ClientIDManagerStartup 8/5/2014 1:24:53 AM 2932 (0x0B74)
Persisted hardware IDs in CCM_ClientIdentificationInformation=@:
HardwareID1=2:0760033F87CBB92FC5D6343C630C99002655F937
HardwareID2=98130500010000EE ClientIDManagerStartup 8/5/2014 1:24:53 AM 2932 (0x0B74)
Failed to open to WMI namespace '\\.\root\ccmvdi' (8007045b) ClientIDManagerStartup 8/5/2014 1:25:02 AM 372 (0x0174)
[----- SHUTDOWN -----] ClientIDManagerStartup 8/5/2014 1:25:02 AM 372 (0x0174)
[----- STARTUP -----] ClientIDManagerStartup 8/5/2014 1:25:42 AM 2012 (0x07DC)
Read SMBIOS (encoded): 31003800300035002D0030003700310038002D0035003700330038002D0035003500350033002D0034003800350030002D0038003000390030002D0032003800 ClientIDManagerStartup 8/5/2014 1:25:51 AM 2504 (0x09C8)
Evaluated SMBIOS (encoded): 31003800300035002D0030003700310038002D0035003700330038002D0035003500350033002D0034003800350030002D0038003000390030002D0032003800 ClientIDManagerStartup 8/5/2014 1:25:51 AM 2504 (0x09C8)
No SMBIOS Changed ClientIDManagerStartup 8/5/2014 1:25:51 AM 2504 (0x09C8)
SMBIOS unchanged ClientIDManagerStartup 8/5/2014 1:25:51 AM 2504 (0x09C8)
SID unchanged ClientIDManagerStartup 8/5/2014 1:25:51 AM 2504 (0x09C8)
HWID unchanged ClientIDManagerStartup 8/5/2014 1:25:53 AM 2504 (0x09C8)
GetSystemEnclosureChassisInfo: IsFixed=TRUE, IsLaptop=FALSE ClientIDManagerStartup 8/5/2014 1:25:53 AM 2504 (0x09C8)
Windows To Go requires a minimum operating system of Windows 8 ClientIDManagerStartup 8/5/2014 1:25:53 AM 2504 (0x09C8)
Computed HardwareID=2:0760033F87CBB92FC5D6343C630C99002655F937
Win32_SystemEnclosure.SerialNumber=1805-0718-5738-5553-4850-8090-28
Win32_SystemEnclosure.SMBIOSAssetTag=2522-6626-0190-0004-7023-0906-91
Win32_BaseBoard.SerialNumber=1805-0718-5738-5553-4850-8090-28
Win32_BIOS.SerialNumber=1805-0718-5738-5553-4850-8090-28
Win32_NetworkAdapterConfiguration.MACAddress=00:15:5D:00:2A:0C ClientIDManagerStartup 8/5/2014 1:25:53 AM 2504 (0x09C8)
Persisted hardware IDs in CCM_ClientIdentificationInformation=@:
HardwareID1=2:0760033F87CBB92FC5D6343C630C99002655F937
HardwareID2=98C70600010000EE ClientIDManagerStartup 8/5/2014 1:25:53 AM 2504 (0x09C8)
ClientAuth.log:
Error signing client message (0x80004005). ClientAuth 4/22/2014 9:25:01 PM 1612 (0x064C)
Error signing client message (0x80004005). ClientAuth 4/22/2014 9:25:01 PM 1612 (0x064C)
Error signing client message (0x80004005). ClientAuth 4/22/2014 9:25:02 PM 1612 (0x064C)
Error signing client message (0x80004005). ClientAuth 4/22/2014 9:25:02 PM 1612 (0x064C)
ClientLocation.log:
Current AD forest name is demoforest.local, domain name is demoforest.local ClientLocation 8/5/2014 1:24:34 AM 372 (0x0174)
Domain joined client is in Intranet ClientLocation 8/5/2014 1:24:34 AM 372 (0x0174)
Current AD forest name is demoforest.local, domain name is demoforest.local ClientLocation 8/5/2014 1:24:53 AM 2932 (0x0B74)
Domain joined client is in Intranet ClientLocation 8/5/2014 1:24:53 AM 2932 (0x0B74)
Rotating assigned management point, new management point [1] is: DEMO-SCCM.demoforest.local (7958) with capabilities: <Capabilities SchemaVersion="1.0"><Property Name="SSLState" Value="0"/></Capabilities> ClientLocation 8/5/2014
1:24:53 AM 2932 (0x0B74)
Assigned MP changed from <DEMO-SCCM.demoforest.local> to <DEMO-SCCM.demoforest.local>. ClientLocation 8/5/2014 1:24:53 AM 2932 (0x0B74)
Rotating assigned management point, new management point [1] is: DEMO-SCCM.demoforest.local (7958) with capabilities: <Capabilities SchemaVersion="1.0"><Property Name="SSLState" Value="0"/></Capabilities> ClientLocation 8/5/2014
1:24:54 AM 2932 (0x0B74)
Assigned MP changed from <DEMO-SCCM.demoforest.local> to <DEMO-SCCM.demoforest.local>. ClientLocation 8/5/2014 1:24:54 AM 2932 (0x0B74)
Current AD forest name is demoforest.local, domain name is demoforest.local ClientLocation 8/5/2014 1:25:42 AM 2012 (0x07DC)
Domain joined client is in Intranet ClientLocation 8/5/2014 1:25:42 AM 2012 (0x07DC)
Current AD forest name is demoforest.local, domain name is demoforest.local ClientLocation 8/5/2014 1:25:53 AM 2504 (0x09C8)
Domain joined client is in Intranet ClientLocation 8/5/2014 1:25:53 AM 2504 (0x09C8)
Rotating assigned management point, new management point [1] is: DEMO-SCCM.demoforest.local (7958) with capabilities: <Capabilities SchemaVersion="1.0"><Property Name="SSLState" Value="0"/></Capabilities> ClientLocation 8/5/2014
1:25:53 AM 2504 (0x09C8)
Assigned MP changed from <DEMO-SCCM.demoforest.local> to <DEMO-SCCM.demoforest.local>. ClientLocation 8/5/2014 1:25:53 AM 2504 (0x09C8)
Rotating assigned management point, new management point [1] is: DEMO-SCCM.demoforest.local (7958) with capabilities: <Capabilities SchemaVersion="1.0"><Property Name="SSLState" Value="0"/></Capabilities> ClientLocation 8/5/2014
1:25:53 AM 2504 (0x09C8)
Assigned MP changed from <DEMO-SCCM.demoforest.local> to <DEMO-SCCM.demoforest.local>. ClientLocation 8/5/2014 1:25:53 AM 2504 (0x09C8)
Getting Assigned Site ClientLocation 8/5/2014 9:02:38 AM 2264 (0x08D8)
Assigned Site is TDS ClientLocation 8/5/2014 9:02:38 AM 2264 (0x08D8)
Getting Assigned Site ClientLocation 8/5/2014 1:19:20 PM 2604 (0x0A2C)
Assigned Site is TDS ClientLocation 8/5/2014 1:19:20 PM 2604 (0x0A2C)
execmgr.log (with errors):
Requesting MTC to delete task with id: {C5DCEE82-C903-4CBD-98CC-534646B3EFD7} execmgr 4/22/2014 7:14:28 PM 1872 (0x0750)
This execution request does not own the corresponding task in MTC, returning without deleting it from MTC. execmgr 4/22/2014 7:14:28 PM 1872 (0x0750)
Service startup. execmgr 4/22/2014 7:16:09 PM 2332 (0x091C)
Service startup. execmgr 4/22/2014 9:17:36 PM 2216 (0x08A8)
Service startup. execmgr 4/22/2014 9:23:02 PM 2348 (0x092C)
Service startup. execmgr 4/22/2014 9:24:53 PM 1000 (0x03E8)
Software Distribution site settings (CCM_SoftwareDistributionClientConfig) policy does not yet exist on the client.
If the client is not yet registered, this is expected behavior. execmgr 8/4/2014 11:56:52 PM 3224 (0x0C98)
Software Distribution site settings (CCM_SoftwareDistributionClientConfig) policy does not yet exist on the client.
If the client is not yet registered, this is expected behavior. execmgr 8/4/2014 11:56:52 PM 1292 (0x050C)
Service startup. execmgr 8/4/2014 11:57:32 PM 3696 (0x0E70)
Software Distribution site settings (CCM_SoftwareDistributionClientConfig) policy does not yet exist on the client.
If the client is not yet registered, this is expected behavior. execmgr 8/4/2014 11:57:33 PM 3696 (0x0E70)
Software distribution agent was enabled execmgr 8/5/2014 12:01:55 AM 3448 (0x0D78)
Service startup. execmgr 8/5/2014 12:02:44 AM 2272 (0x08E0)
ExecMgr::GetTaskState - GetTaskState Failed with error code 0x87d00317 execmgr 8/5/2014 12:03:02 AM 1652 (0x0674)
Policy arrived for child program Install execmgr 8/5/2014 12:03:02 AM 1648 (0x0670)
Creating mandatory request for advert TDS20014, program Install, package TDS00014 execmgr 8/5/2014 12:03:02 AM 1652 (0x0674)
An existing MTC token was supplied, this execution request is not owner of MTC object. execmgr 8/5/2014 12:03:02 AM 1652 (0x0674)
CertificateMaintanance.log:
HTTP is selected for Client. The current state is 0. CertificateMaintenance 4/22/2014 6:49:04 PM 604 (0x025C)
Raising pending event:
instance of CCM_ServiceHost_CertRetrieval_Status
DateTime = "20140422164904.539000+000";
HRESULT = "0x00000001";
ProcessID = 3320;
ThreadID = 604;
CertificateMaintenance 4/22/2014 6:49:04 PM 604 (0x025C)
Raising event:
instance of CCM_ServiceHost_CertRetrieval_Status
ClientID = "GUID:7ff40832-4c01-456f-9705-096da67985b3";
DateTime = "20140422164946.336000+000";
HRESULT = "0x00000001";
ProcessID = 3320;
ThreadID = 3216;
CertificateMaintenance 4/22/2014 6:49:46 PM 3216 (0x0C90)
HTTP is selected for Client. The current state is 0. CertificateMaintenance 8/4/2014 11:56:39 PM 2212 (0x08A4)
Raising pending event:
instance of CCM_ServiceHost_CertRetrieval_Status
DateTime = "20140804215639.612000+000";
HRESULT = "0x00000001";
ProcessID = 2144;
ThreadID = 2212;
CertificateMaintenance 8/4/2014 11:56:39 PM 2212 (0x08A4)
Raising event:
instance of CCM_ServiceHost_CertRetrieval_Status
ClientID = "GUID:b8d72095-2590-4724-9db9-b721efc05007";
DateTime = "20140804215651.440000+000";
HRESULT = "0x00000001";
ProcessID = 2144;
ThreadID = 3348;
CertificateMaintenance 8/4/2014 11:56:51 PM 3348 (0x0D14)
Client is set to use HTTPS when available. The current state is 480. CertificateMaintenance 8/4/2014 11:56:56 PM 1096 (0x0448)
Client is set to use HTTPS when available. The current state is 480. CertificateMaintenance 8/5/2014 12:02:33 AM 1656 (0x0678)
Client is set to use HTTPS when available. The current state is 480. CertificateMaintenance 8/5/2014 12:11:17 AM 384 (0x0180)
Client is set to use HTTPS when available. The current state is 480. CertificateMaintenance 8/5/2014 1:24:34 AM 372 (0x0174)
Client is set to use HTTPS when available. The current state is 480. CertificateMaintenance 8/5/2014 1:25:42 AM 2012 (0x07DC)
smscliui.log:
Perform Action: Request & Evaluate User Policy - {3A88A2F3-0C39-45fa-8959-81F21BF500CE}. Message sent, id={FC736B58-2635-45B8-8002-E7C8D6CCEB8D} smscliui 8/5/2014 9:02:34 AM 2484 (0x09B4)
Current Assigned Site: TDS smscliui 8/5/2014 9:02:38 AM 868 (0x0364)
Currently assigned FQDN: smscliui 8/5/2014 9:02:41 AM 868 (0x0364)
Failed to set DNSSuffix value to the registry. smscliui 8/5/2014 9:02:58 AM 868 (0x0364)
SMS Site code has not been changed. smscliui 8/5/2014 9:02:58 AM 868 (0x0364)
Current Assigned Site: TDS smscliui 8/5/2014 1:19:20 PM 2160 (0x0870)
CcmMessaging.log:
Queue 'StateMessageManager' initialized with 0 messages. CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initialized queue processor 'StateMessageManager'. Enabled=true Concurrency=1 CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initializing queue 'CTMDTSReply'... CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Queue 'CTMDTSReply' initialized with 0 messages. CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initialized queue processor 'CTMDTSReply'. Enabled=true Concurrency=5 CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initializing queue 'execmgr'... CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Queue 'execmgr' initialized with 0 messages. CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initialized queue processor 'execmgr'. Enabled=true Concurrency=1 CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initializing queue 'PolicyAgent_RequestAssignments'... CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Queue 'PolicyAgent_RequestAssignments' initialized with 0 messages. CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initialized queue processor 'PolicyAgent_RequestAssignments'. Enabled=true Concurrency=5 CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initializing queue 'ClientRegistration'... CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Queue 'ClientRegistration' initialized with 0 messages. CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initialized queue processor 'ClientRegistration'. Enabled=true Concurrency=5 CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initializing queue 'EndpointProtectionAgent'... CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Queue 'EndpointProtectionAgent' initialized with 0 messages. CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initialized queue processor 'EndpointProtectionAgent'. Enabled=true Concurrency=20 CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initializing queue 'LS_ScheduledCleanup'... CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Queue 'LS_ScheduledCleanup' initialized with 0 messages. CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initialized queue processor 'LS_ScheduledCleanup'. Enabled=true Concurrency=5 CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initializing queue 'PolicyAgent_Cleanup'... CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Queue 'PolicyAgent_Cleanup' initialized with 0 messages. CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initialized queue processor 'PolicyAgent_Cleanup'. Enabled=true Concurrency=5 CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initializing queue 'DCMAgent'... CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Queue 'DCMAgent' initialized with 0 messages. CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initialized queue processor 'DCMAgent'. Enabled=true Concurrency=5 CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initializing queue 'CertEnrollAgent'... CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Queue 'CertEnrollAgent' initialized with 0 messages. CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initialized queue processor 'CertEnrollAgent'. Enabled=true Concurrency=1 CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initializing queue 'ExternalEventAgent'... CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Queue 'ExternalEventAgent' initialized with 0 messages. CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initialized queue processor 'ExternalEventAgent'. Enabled=true Concurrency=20 CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initializing queue 'UpdateStore'... CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Queue 'UpdateStore' initialized with 0 messages. CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initialized queue processor 'UpdateStore'. Enabled=true Concurrency=1 CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initializing queue 'PolicyAgent_ReplyAssignments'... CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Queue 'PolicyAgent_ReplyAssignments' initialized with 0 messages. CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initialized queue processor 'PolicyAgent_ReplyAssignments'. Enabled=true Concurrency=5 CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initializing queue 'SMSSHA'... CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Queue 'SMSSHA' initialized with 0 messages. CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initialized queue processor 'SMSSHA'. Enabled=true Concurrency=1 CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initializing queue 'lmp_[http]mp_locationmanager'... CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Queue 'lmp_[http]mp_locationmanager' initialized with 0 messages. CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initialized queue processor 'lmp_[http]mp_locationmanager'. Enabled=true Concurrency=1 CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initializing queue 'mp_statusreceiver'... CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Queue 'mp_statusreceiver' initialized with 0 messages. CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initialized queue processor 'mp_statusreceiver'. Enabled=true Concurrency=1 CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initializing queue 'mp_[http]mp_locationmanager'... CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Queue 'mp_[http]mp_locationmanager' initialized with 1 messages. CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Initialized queue processor 'mp_[http]mp_locationmanager'. Enabled=true Concurrency=1 CcmMessaging 8/5/2014 1:25:50 AM 2192 (0x0890)
Raising event:
instance of CCM_CcmHttp_Status
ClientID = "GUID:b8d72095-2590-4724-9db9-b721efc05007";
DateTime = "20140804232553.423000+000";
HostName = "DEMO-SCCM.demoforest.local";
HRESULT = "0x00000000";
ProcessID = 1996;
StatusCode = 0;
ThreadID = 2504;
CcmMessaging 8/5/2014 1:25:53 AM 2504 (0x09C8)
Raising event:
instance of CCM_CcmHttp_Status
ClientID = "GUID:b8d72095-2590-4724-9db9-b721efc05007";
DateTime = "20140804232553.485000+000";
HostName = "DEMO-SCCM.demoforest.local";
HRESULT = "0x00000000";
ProcessID = 1996;
StatusCode = 0;
ThreadID = 2504;
CcmMessaging 8/5/2014 1:25:53 AM 2504 (0x09C8)
Raising event:
instance of CCM_CcmHttp_Status
ClientID = "GUID:b8d72095-2590-4724-9db9-b721efc05007";
DateTime = "20140804232553.563000+000";
HostName = "DEMO-SCCM.demoforest.local";
HRESULT = "0x00000000";
ProcessID = 1996;
StatusCode = 0;
ThreadID = 2504;
CcmMessaging 8/5/2014 1:25:53 AM 2504 (0x09C8)
Raising event:
instance of CCM_CcmHttp_Status
ClientID = "GUID:b8d72095-2590-4724-9db9-b721efc05007";
DateTime = "20140804232553.657000+000";
HostName = "DEMO-SCCM.demoforest.local";
HRESULT = "0x00000000";
ProcessID = 1996;
StatusCode = 0;
ThreadID = 2504;
CcmMessaging 8/5/2014 1:25:53 AM 2504 (0x09C8)
Raising event:
instance of CCM_CcmHttp_Status
ClientID = "GUID:b8d72095-2590-4724-9db9-b721efc05007";
DateTime = "20140804232606.048000+000";
HostName = "DEMO-SCCM.demoforest.local";
HRESULT = "0x00000000";
ProcessID = 1996;
StatusCode = 0;
ThreadID = 2508;
CcmMessaging 8/5/2014 1:26:06 AM 2508 (0x09CC)
Raising event:
instance of CCM_CcmHttp_Status
ClientID = "GUID:b8d72095-2590-4724-9db9-b721efc05007";
DateTime = "20140804232606.110000+000";
HostName = "DEMO-SCCM.demoforest.local";
HRESULT = "0x00000000";
ProcessID = 1996;
StatusCode = 0;
ThreadID = 2188;
CcmMessaging 8/5/2014 1:26:06 AM 2188 (0x088C)
Raising event:
instance of CCM_CcmHttp_Status
ClientID = "GUID:b8d72095-2590-4724-9db9-b721efc05007";
DateTime = "20140804232606.188000+000";
HostName = "DEMO-SCCM.demoforest.local";
HRESULT = "0x00000000";
ProcessID = 1996;
StatusCode = 0;
ThreadID = 2504;
CcmMessaging 8/5/2014 1:26:06 AM 2504 (0x09C8)
CcmNotificationAgent.log:
Bgb client agent is starting... BgbAgent 8/5/2014 1:26:05 AM 2504 (0x09C8)
Bgb client agent is disabled BgbAgent 8/5/2014 1:26:05 AM 2504 (0x09C8)
TCP Listener is disabled. BgbAgent 8/5/2014 1:26:05 AM 2504 (0x09C8)
BgbController main thread is started with settings: {bgb enable = 0}, {tcp enabled = 0}, {tcp port = 0} and {http enabled = 0}. BgbAgent 8/5/2014 1:26:05 AM 2504 (0x09C8)
Wait 3600 seconds for event notification. BgbAgent 8/5/2014 1:26:05 AM 3076 (0x0C04)
Wait 3600 seconds for event notification. BgbAgent 8/5/2014 2:26:05 AM 3076 (0x0C04)
Any help is appreciated and with kind regards,
Willem-JanHello all,
I modified the TS, but the problem is still there.
smsts.log:
==============================[ OSDSetupHook.exe ]============================== OSDSetupHook 8/5/2014 4:51:30 PM 856 (0x0358)
Executing task sequence OSDSetupHook 8/5/2014 4:51:30 PM 856 (0x0358)
Loading the Task Sequencing Environment from "C:\_SMSTaskSequence\TSEnv.dat". OSDSetupHook 8/5/2014 4:51:30 PM 856 (0x0358)
Environment scope successfully created: Global\{51A016B6-F0DE-4752-B97C-54E6F386A912} OSDSetupHook 8/5/2014 4:51:30 PM 856 (0x0358)
Environment scope successfully created: Global\{BA3A3900-CA6D-4ac1-8C28-5073AFC22B03} OSDSetupHook 8/5/2014 4:51:30 PM 856 (0x0358)
Debug shell is enabled OSDSetupHook 8/5/2014 4:51:39 PM 856 (0x0358)
Successfully enabled debug command shell support. OSDSetupHook 8/5/2014 4:51:39 PM 856 (0x0358)
Configuring local administrator account OSDSetupHook 8/5/2014 4:51:39 PM 856 (0x0358)
Re-assign all drive letters... OSDSetupHook 8/5/2014 4:51:39 PM 856 (0x0358)
Could not open drive Q:\ (80070005) OSDSetupHook 8/5/2014 4:51:39 PM 856 (0x0358)
Ignoring inaccessible volume 'Q:' with error 0x80070005 OSDSetupHook 8/5/2014 4:51:39 PM 856 (0x0358)
No partition needs to be udpated. OSDSetupHook 8/5/2014 4:51:39 PM 856 (0x0358)
Installing SMS client OSDSetupHook 8/5/2014 4:51:39 PM 856 (0x0358)
Client already installed. OSDSetupHook 8/5/2014 4:51:39 PM 856 (0x0358)
Moving logs to SMS client directory OSDSetupHook 8/5/2014 4:51:39 PM 856 (0x0358)
Successfully moved logs to SMS client log directory: C:\Windows\CCM\Logs\SMSTSLog OSDSetupHook 8/5/2014 4:51:39 PM 856 (0x0358)
Executing task sequence manager bootstrap OSDSetupHook 8/5/2014 4:51:39 PM 856 (0x0358)
Executing command line: "C:\Windows\CCM\TSMBootstrap.exe" /env:Gina /configpath:C:\_SMSTaskSequence /bootcount:5 OSDSetupHook 8/5/2014 4:51:39 PM 856 (0x0358)
==============================[ TSMBootStrap.exe ]============================== TSMBootstrap 8/5/2014 4:51:39 PM 2152 (0x0868)
Command line: "C:\Windows\CCM\TSMBootstrap.exe" /env:Gina /configpath:C:\_SMSTaskSequence /bootcount:5 TSMBootstrap 8/5/2014 4:51:39 PM 2152 (0x0868)
Current OS version is 6.1.7601.1 TSMBootstrap 8/5/2014 4:51:39 PM 2152 (0x0868)
Logging successfully initialized. TSMBootstrap 8/5/2014 4:51:39 PM 2152 (0x0868)
Resuming Task Sequence in Full OS TSMBootstrap 8/5/2014 4:51:39 PM 2152 (0x0868)
We are going in GINA and potentially need to set the authenticator TSMBootstrap 8/5/2014 4:51:39 PM 2152 (0x0868)
setting the authenticator TSMBootstrap 8/5/2014 4:51:39 PM 2152 (0x0868)
Executing command line: "C:\Windows\CCM\TsProgressUI.exe" /Register:WinPE TSMBootstrap 8/5/2014 4:51:39 PM 2152 (0x0868)
==========[ TsProgressUI started in process 2196 ]========== TsProgressUI 8/5/2014 4:51:39 PM 2200 (0x0898)
Command line: "C:\Windows\CCM\TsProgressUI.exe" /Register:WinPE TsProgressUI 8/5/2014 4:51:39 PM 2200 (0x0898)
Registering COM classes TsProgressUI 8/5/2014 4:51:39 PM 2200 (0x0898)
sbModulePath = C:\Windows\CCM\TsProgressUI.exe TsProgressUI 8/5/2014 4:51:39 PM 2200 (0x0898)
Unregistering class objects TsProgressUI 8/5/2014 4:51:39 PM 2200 (0x0898)
Shutdown complete. TsProgressUI 8/5/2014 4:51:39 PM 2200 (0x0898)
Process completed with exit code 0 TSMBootstrap 8/5/2014 4:51:39 PM 2152 (0x0868)
Successfully registered TS Progress UI. TSMBootstrap 8/5/2014 4:51:39 PM 2152 (0x0868)
Found network adapter "Intel 21140-Based PCI Fast Ethernet Adapter (Emulated)" with IP Address 5.5.5.101. TSMBootstrap 8/5/2014 4:51:39 PM 2152 (0x0868)
Starting Task Sequence Manager. TSMBootstrap 8/5/2014 4:51:39 PM 2152 (0x0868)
executing TS Manager not in full media TSMBootstrap 8/5/2014 4:51:39 PM 2152 (0x0868)
executing TS Manager in c:\windows\ccm TSMBootstrap 8/5/2014 4:51:39 PM 2152 (0x0868)
Executing command line: "TsManager.exe" TSMBootstrap 8/5/2014 4:51:39 PM 2152 (0x0868)
Successfully intialized Logging for TS Manager. TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Commandline: "TsManager.exe" TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
/service parameter found at index: -1 TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
/standalone parameter found at index: -1 TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
/noclient parameter found at index: -1 TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Successfully registered Task Sequencing COM Interface. TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Executing as a standalone exe TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Initializing TS Environment TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Opening Task Sequencing Environment TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Deleting volume ID file C:\_SMSTSVolumeID.7159644d-f741-45d5-ab29-0ad8aa4771ca ... TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
pwszPath && *pwszPath, HRESULT=80070057 (e:\qfe\nts\sms\framework\tscore\resolvesource.cpp,228) TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
pwszPath && *pwszPath, HRESULT=80070057 (e:\qfe\nts\sms\framework\tscore\resolvesource.cpp,228) TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
pwszPath && *pwszPath, HRESULT=80070057 (e:\qfe\nts\sms\framework\tscore\resolvesource.cpp,228) TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
pwszPath && *pwszPath, HRESULT=80070057 (e:\qfe\nts\sms\framework\tscore\resolvesource.cpp,228) TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
NOT executing in WinPE TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Compiling Config policy TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Compiling config policies... TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Compiling SysHealthConfig policy... TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Retrieving value from TSEnv for '_SMSTSSysHealthClientConfig' TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
::DecompressBuffer(65536) TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Decompression (zlib) succeeded: original size 684, uncompressed size 4652. TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Instance path = 'CCM_SystemHealthClientConfig.SiteSettingsKey="1"' TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Start to compile TS policy TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Policy complied successfully in WMI 'root\ccm\policy\defaultmachine\requestedconfig' namespace TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
End TS policy compilation TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Compiling SoftUpdConfig policy... TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Retrieving value from TSEnv for '_SMSTSSWUpdateClientConfig' TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
::DecompressBuffer(65536) TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Decompression (zlib) succeeded: original size 1922, uncompressed size 19242. TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Start to compile TS policy TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Policy complied successfully in WMI 'root\ccm\policy\defaultmachine\requestedconfig' namespace TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
End TS policy compilation TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Instance path = 'CCM_SoftwareUpdatesClientConfig.SiteSettingsKey="1"' TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Start to compile TS policy TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Policy complied successfully in WMI 'root\ccm\policy\defaultmachine\requestedconfig' namespace TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
End TS policy compilation TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Start to compile TS policy TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Policy complied successfully in WMI 'root\ccm\policy\defaultmachine\requestedconfig' namespace TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
End TS policy compilation TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Start to compile TS policy TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Policy complied successfully in WMI 'root\ccm\policy\defaultmachine\requestedconfig' namespace TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
End TS policy compilation TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Compiling SoftDistClientConfig policy... TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Retrieving value from TSEnv for '_SMSTSSoftDistClientConfig' TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
::DecompressBuffer(65536) TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Decompression (zlib) succeeded: original size 1327, uncompressed size 13740. TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Instance path = 'CCM_SoftwareDistributionClientConfig.SiteSettingsKey="1"' TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Start to compile TS policy TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Policy complied successfully in WMI 'root\ccm\policy\defaultmachine\requestedconfig' namespace TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
End TS policy compilation TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Compiling NAAConfig policy... TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Retrieving value from TSEnv for '_SMSTSNAAConfigPolicy' TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
::DecompressBuffer(65536) TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Decompression (zlib) succeeded: original size 1022, uncompressed size 6494. TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Instance path = 'CCM_NetworkAccessAccount.SiteSettingsKey="1"' TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Start to compile TS policy TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Policy complied successfully in WMI 'root\ccm\policy\defaultmachine\requestedconfig' namespace TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
End TS policy compilation TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Instance path = 'CCM_NetworkAccessAccount.SiteSettingsKey="1"' TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Start to compile TS policy TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Policy complied successfully in WMI 'root\ccm\policy\defaultmachine\requestedconfig' namespace TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
End TS policy compilation TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Compiling RebootSettingsConfig policy... TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Retrieving value from TSEnv for '_SMSTSRebootSettingsConfigPolicy' TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
::DecompressBuffer(65536) TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Decompression (zlib) succeeded: original size 433, uncompressed size 1556. TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Instance path = 'CCM_RebootSettings.SiteSettingsKey="1"' TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Start to compile TS policy TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Policy complied successfully in WMI 'root\ccm\policy\defaultmachine\requestedconfig' namespace TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
End TS policy compilation TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Compiling AppManClientConfig policy... TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Retrieving value from TSEnv for '_SMSTSAppManClientConfigPolicy' TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
::DecompressBuffer(65536) TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Decompression (zlib) succeeded: original size 982, uncompressed size 6358. TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Instance path = 'CCM_ApplicationManagementClientConfig.SiteSettingsKey="1"' TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Start to compile TS policy TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Failed to find property 'AutoApplyDeployment' in 'CCM_ApplicationManagementClientConfig' class defintion. Error 0x80041002. Default value will be used for this property TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Policy complied successfully in WMI 'root\ccm\policy\defaultmachine\requestedconfig' namespace TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
End TS policy compilation TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Get Install Directory for SMS Client TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
Updating settings in \\.\root\ccm\policy\machine\actualconfig TSManager 8/5/2014 4:51:40 PM 2244 (0x08C4)
RequestedConfig policy instance(s) : 435 TSManager 8/5/2014 4:51:49 PM 2244 (0x08C4)
Locked \\.\ROOT\ccm\policy\machine\RequestedConfig for source SMS:Client:Default:{BFDADC41-FDCD-4B9C-B446-8A818D01BEA3} successfully TSManager 8/5/2014 4:51:49 PM 2244 (0x08C4)
Namespace: \\.\ROOT\ccm\policy\machine\RequestedConfig, Query: SELECT PolicyID FROM CCM_Policy_Policy5 WHERE (PolicySource = "SMS:Client:Default:{BFDADC41-FDCD-4B9C-B446-8A818D01BEA3}") AND (PolicyState
= "Active") AND (PolicyType = "Machine") TSManager 8/5/2014 4:51:49 PM 2244 (0x08C4)
There is no ccm_policy_policy instance, skipping addition to realinst map TSManager 8/5/2014 4:51:49 PM 2244 (0x08C4)
Unlocked \\.\ROOT\ccm\policy\machine\RequestedConfig for source SMS:Client:Default:{BFDADC41-FDCD-4B9C-B446-8A818D01BEA3} successfully TSManager 8/5/2014 4:51:49 PM 2244 (0x08C4)
RequestedConfig policy instance(s) : 0 TSManager 8/5/2014 4:51:50 PM 2244 (0x08C4)
Locked \\.\ROOT\ccm\policy\machine\RequestedConfig for source SMS:TDS successfully TSManager 8/5/2014 4:51:50 PM 2244 (0x08C4)
Namespace: \\.\ROOT\ccm\policy\machine\RequestedConfig, Query: SELECT PolicyID FROM CCM_Policy_Policy5 WHERE (PolicySource = "SMS:TDS") AND (PolicyState = "Active") AND (PolicyType = "Machine") TSManager 8/5/2014
4:51:50 PM 2244 (0x08C4)
There is no ccm_policy_policy instance, skipping addition to realinst map TSManager 8/5/2014 4:51:50 PM 2244 (0x08C4)
Unlocked \\.\ROOT\ccm\policy\machine\RequestedConfig for source SMS:TDS successfully TSManager 8/5/2014 4:51:50 PM 2244 (0x08C4)
RequestedConfig policy instance(s) : 0 TSManager 8/5/2014 4:51:51 PM 2244 (0x08C4)
Locked \\.\ROOT\ccm\policy\machine\RequestedConfig for source CcmPortal successfully TSManager 8/5/2014 4:51:51 PM 2244 (0x08C4)
Namespace: \\.\ROOT\ccm\policy\machine\RequestedConfig, Query: SELECT PolicyID FROM CCM_Policy_Policy5 WHERE (PolicySource = "CcmPortal") AND (PolicyState = "Active") AND (PolicyType = "Machine") TSManager 8/5/2014
4:51:51 PM 2244 (0x08C4)
There is no ccm_policy_policy instance, skipping addition to realinst map TSManager 8/5/2014 4:51:51 PM 2244 (0x08C4)
Unlocked \\.\ROOT\ccm\policy\machine\RequestedConfig for source CcmPortal successfully TSManager 8/5/2014 4:51:51 PM 2244 (0x08C4)
RequestedConfig policy instance(s) : 0 TSManager 8/5/2014 4:51:53 PM 2244 (0x08C4)
Locked \\.\ROOT\ccm\policy\machine\RequestedConfig for source Local successfully TSManager 8/5/2014 4:51:53 PM 2244 (0x08C4)
RequestedConfig policy instance(s) : 9 TSManager 8/5/2014 4:51:53 PM 2244 (0x08C4)
Unlocked \\.\ROOT\ccm\policy\machine\RequestedConfig for source Local successfully TSManager 8/5/2014 4:51:53 PM 2244 (0x08C4)
RequestedConfig policy instance(s) : 11943 TSManager 8/5/2014 4:51:57 PM 2244 (0x08C4)
Locked \\.\ROOT\ccm\policy\machine\RequestedConfig for source CcmTaskSequence successfully TSManager 8/5/2014 4:51:57 PM 2244 (0x08C4)
Namespace: \\.\ROOT\ccm\policy\machine\RequestedConfig, Query: SELECT PolicyID FROM CCM_Policy_Policy5 WHERE (PolicySource = "CcmTaskSequence") AND (PolicyState = "Active") AND (PolicyType = "Machine") TSManager 8/5/2014
4:51:57 PM 2244 (0x08C4)
There is no ccm_policy_policy instance, skipping addition to realinst map TSManager 8/5/2014 4:51:57 PM 2244 (0x08C4)
Unlocked \\.\ROOT\ccm\policy\machine\RequestedConfig for source CcmTaskSequence successfully TSManager 8/5/2014 4:51:57 PM 2244 (0x08C4)
Total RequestedConfig policy instance(s) : 12387 TSManager 8/5/2014 4:52:00 PM 2244 (0x08C4)
New/Changed ActualConfig policy instance(s) : 0 TSManager 8/5/2014 4:52:04 PM 2244 (0x08C4)
Policy evaluation initiated TSManager 8/5/2014 4:52:04 PM 2244 (0x08C4)
Waiting for policy to be compiled in 'root\ccm\policy\machine' namespace TSManager 8/5/2014 4:52:04 PM 2244 (0x08C4)
Query = 'CCM_SystemHealthClientConfig.SiteSettingsKey="1"' TSManager 8/5/2014 4:52:04 PM 2244 (0x08C4)
Verified policy for instance path 'CCM_SystemHealthClientConfig.SiteSettingsKey="1"' compiled in 'root\ccm\policy\machine' namespace TSManager 8/5/2014 4:52:04 PM 2244 (0x08C4)
Query = 'CCM_SoftwareUpdatesClientConfig.SiteSettingsKey="1"' TSManager 8/5/2014 4:52:04 PM 2244 (0x08C4)
Verified policy for instance path 'CCM_SoftwareUpdatesClientConfig.SiteSettingsKey="1"' compiled in 'root\ccm\policy\machine' namespace TSManager 8/5/2014 4:52:04 PM 2244 (0x08C4)
Query = 'CCM_SoftwareDistributionClientConfig.SiteSettingsKey="1"' TSManager 8/5/2014 4:52:04 PM 2244 (0x08C4)
Verified policy for instance path 'CCM_SoftwareDistributionClientConfig.SiteSettingsKey="1"' compiled in 'root\ccm\policy\machine'
The Powershell command as described by NPerson give the output:
C:\Windows\system32>powershell Invoke-WmiMethod -Namespace root\CCM -Class SMS_C
lient -Name SetClientProvisioningMode -ArgumentList $false
__GENUS : 1
__CLASS : __PARAMETERS
__SUPERCLASS :
__DYNASTY : __PARAMETERS
__RELPATH : __PARAMETERS
__PROPERTY_COUNT : 1
__DERIVATION : {}
__SERVER : DEMO-CAPTURE
__NAMESPACE : ROOT\ccm
__PATH :
\\DEMO-CAPTURE\ROOT\ccm:__PARAMETERS
ReturnValue :
PSComputerName : DEMO-CAPTURE
It is about the PSComputerName: that is the name of the machine on which the capture was made. So I suppose the problem is already in the image. Is my statement correct or is it not relevant?
With kind regards,
Willem-Jan -
OblixAnonymous user creation failed
Hi all !
during the installation of POlicy Manager. at the culmination of Product Setup. i got this message at the bottom
During creation of these policies 'OblixAnonymous' user creation failed. Before enabling these Policies please create 'OblixAnonymous' user.+
what is the purpose of Oblix Anonymous user and will Policy manager work without this user?
Best RegardsSure, OAM works just fine without the OblixAnonymous user. However, what might also have happened is that the policies automatically created by OAM to protect the admin URIs /access and /identity would have not been created or only partially created. As long as you're OK with that, your OAM install is completely functional.
OblixAnonymous is the user the credential_mapping plug-in binds to for the Anonymous authentication scheme that is auto-created. You can always create one later if you need one to "unprotect" a URL.
-Vinod -
User policy becomes uneffected while in use.
I'm running a fresh install of zenworks 11.2 on SELS 11 64 bit.
A bit of back ground. I have a machine policy in place that pretty much makes the machine unusable. Then I have a user policy that reverses much of the machine policy. I've been seeing many of my Windows 7 SP1 64 bit machines look like the user policy looses its effectiveness and reverts back to the machine policy. This seems to be random. Doesn't happen to everyone. Happens to some people frequently. I've looked over the log and haven't found to much in common. I did see this but on my test machines that did it this message didn't come up when the policy went away. on 1 that i knew the time i saw no messages in the log at all. early i did see this message though
[ WARN] [08/30/2012 07:50:20.542] [1984] [ZenworksWindowsService] [34] [] [ZESMEnterprisePolicySettings] [ZESMPolicyHandler.ZESMCORE_COMM_FAILED] [Unable to communicate with ZESService. Please make sure that ZES Service is running.] [Status returned Non-Zero value from ZESM Core function : "StartZESMPolicies[[Zone]]".] []
[DEBUG] [08/30/2012 07:50:20.542] [1984] [ZenworksWindowsService] [34] [] [ZESMEnterprisePolicySettings] [] [Applcaiton Exception occured while Communicating Enterprise Policies to ZESZID : Error in communcating with ZESZID : START function returned : 5] [] []
i've also been seeing this warning
[DEBUG] [08/30/2012 07:58:36.473] [748] [ZenWindowsDaemon] [13] [] [DeviceGuid] [] [Irrecoverable error!!! Error in creating Device Session.] [] []
Any insight or suggestions would be much appreciated.Dist88,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/ -
In OWB the repository user installation failed.
I have installed oracle 10g for oracle warehouse builder and installed owb.
after installation Im trying to create a reposity using uid: auroora pw:auroora
and i have entered all the connection fields at last it is showing an eroor as follows.
the reposity user installation failed on users
java.lang.exception
java.lang.Nullpointer.exception.
I will be thankful to u if u help me in this regard. waiting for u reply.
thnx in advance
regards
srinivasI have same problem (java.lang.exception java.lang.Nullpointer.exception.) when I try to add reporsitory user by Repository Assistant. When I fill all pages from that wizard and press Finish, then I get java exception error alert with exception mentioned above. Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - 64bit Production With the Partitioning, OLAP and Data Mining options and OWB client10.2.0.3.0/repository10.2.0.3.33. This happened since we have migrated from 32b to 64b version. Any workarounds???
-
ACS issue - External unknown user policy database
HI all,
Is there any way I can get back information from an external user database into ACS:
I have 2 ssids, both on seperate IP address ranges. I have an external unknown user policy to pass username and passwords to. In the database there are flags which distinguish between two different types of users. Can I pass this 'flag' back to ACS somehow. When a user tries to logon to one SSID I want ACS to somehow check this flag and decide if that user can access that SSID.
Any ideas ??What is your external database?
-
Does a table/view still return records if the underlying VPD policy fails ?
Hi All,
I have one following question -
Does a table or view still return records if the underlying VPD policy fails?
I am adding one more thing here. Let us say security is being implemented using the application context and VPD.
What would happen when application context is not set ? Would the application apply any default privilege as VPD?
Thanks,
AshiAshiKD wrote:
Hi All,
I have one following question -
Does a table or view still return records if the underlying VPD policy fails?No, you get a standard error message if the VPD function is wrong and if you won't pass the conditions of the VPD, you get nothing. That's what in general happens and should happen as well.
>
I am adding one more thing here. Let us say security is being implemented using the application context and VPD.
What would happen when application context is not set ? Would the application apply any default privilege as VPD?This would be a wrong approach then. If you are truly setting a VPD, you have to make sure that the context is set and the condition variable are passed through it. This is normally done through a logon trigger so again, generically , its not possible that it would not be set. I didn't get at all what ever you said in the last line? What is "default priv for VPD" ?
HTH
Aman.... -
How to solve the issue "CUV check user equivalence failed" ?
Folks,
Hello. I am installing Oracle 11gR2 RAC using 2 VMs (rac1 and rac2) whose OS are Oracle Linux 5.6 in VMPlayer according to the website http://appsdbaworkshop.blogspot.com/2011/10/11gr2-rac-on-linux-56-using-vmware.html
In order to install Grid Infrastructure, we need to run Cluster Utility Verification (CUV) at first by running the cammand below:
[ora11g@rac1 grid]$ ./runcluvfy.sh stage -pre crsinst -n rac1,rac2 -verbose
Its output:
Performing pre-checks for cluster services setup
Check: User equivalence for user “ora11g”
Node Comment
rac1 failed
rac2 failed
Result: PRVF-4007 : User equivalence check failed for user “ora11g”
ERROR:
User equivalence unavailable on all the specified nodes
Verification cannot proceed
Pre-check for cluster services setup was unsuccessful on all the nodes.
As you see above, check user equivalence failed. I have run the 4 commands to fix this error as below:
[ora11g@rac1 /]$ ssh-keygen
Its output:
Generating public/private rsa key pair.
Enter file in which to save the key (/home/grid/.ssh/id_rsa):
Enter passphrase (empty for no passphrase):
Enter same passphrase again:
Your identification has been saved in /home/grid/.ssh/id_rsa.
Your public key has been saved in /home/grid/.ssh/id_rsa.pub.
The key fingerprint is:
0c:10:6c:3b:ae:21:63:64:f8:0d:0e:d8:f0:41:32:ff [email protected]
[ora11g@rac1 .ssh]$ cat *pub >>authorized_keys
[ora11g@rac1 .ssh]$ ssh rac1
Its output:
The authenticity of host ‘rac1 (127.0.0.1)’ can’t be established.
RSA key fingerprint is 9d:ae:51:7c:72:81:07:37:31:92:f1:c8:90:bc:52:55.
Are you sure you want to continue connecting (yes/no)? yes
Warning: Permanently added ‘rac1′ (RSA) to the list of known hosts.
Write failed: Broken pipe.
[ora11g@rac1 .ssh]$ ssh rac1-priv
Its output:
The authenticity of host ‘rac1-priv (192.168.137.35)’ can’t be established.
RSA key fingerprint is 9d:ae:51:7c:72:81:07:37:31:92:f1:c8:90:bc:52:55.
Are you sure you want to continue connecting (yes/no)? yes
Warning: Permanently added ‘rac1-priv,192.168.137.35′ (RSA) to the list of known hosts.
Write failed: Broken pipe.
After run the 4 commands above, I run the command below again:
[ora11g@rac1 grid]$ ./runcluvfy.sh stage -pre crsinst -n rac1,rac2 -verbose
Its output is the same:
PRVF-4007 : User equivalence check failed for user “ora11g”
ERROR:
User equivalence unavailable on all the specified nodes
Verification cannot proceed
I think the problem is "Broken pipe" and ssh cannot write authorized_keys to the machines.
My question is:
Do any folk understand how to solve the issue CUV "check user equivalence failed" for 2 VMs ?
Thanks.Folks,
Hello. Thanks a lot for replying.
I have installed Grid Infrastructure a few times. Each time, on step 7 of 9, the installer fixes and checks 2 machines correctly. The entire installation has 3 parts as below:
1) Install Grid Infrastructure for a Cluster
2) Execute Root Scripts for Install Grid Infrastructure for a Cluster (script is root.sh)
3) Configure Oracle Grid Infrastructure for a Cluster that includes NCA, ASMCA, PICA and CVU.
Each time, on step 8 of 9, the Installer installs Grid Infrastructure for a Cluster successfully that includes "Prepare, Copy files, Link binaries, Setup files and Perform remote operations".
But when the Installer get to part 3 CVU, it fails and then the Database cannot be installed.
Deinstall Grid is a very complicated process to do. Because of this reason, we need to run CVU at first to make sure everything is correct for 2 machines before install Grid.
Even we ignore "user equivalence (ssh)", we don't know whether other items can be passed or not because CVU cannot proceed to check the machines.
My question is:
How to have the script "runcluvfy.sh" continue to check the machines while confronting "user equivalence failed" ? -
SADMIN User-Id failed logins while running srvrmgr
Hi All,
Need help with one of my Customers running srvrmgr command against gateway.
Customer had installed siebel environment 15 days back and it was working fine. Suddenly, from easter week end seeing sadmin id failing and locking out. Customer is running srvrmgr and see sadmin user-id failed logins with ONLY siebel gateway up, and siebel server down.
1.He is able to run odbcsql with sadmin id/pwd fine
2.With sadmin/pwd srvrmgr connects fine, all command line operations are fine. But see sadmin failing in nameserver log file.
3.I see 2 separate sadmin connections in name server log file which is weird, one with 'sadmin' works fine no failed logins and second with 'SADMIN' which fails. Below are log snapshots. Has anyone seen this issue before
1. Below error messages suggest login with SADMIN is failing:
SecAdptLog Debug 5 000000034dbf2a6c:0 2011-05-03 15:18:35 Invoking SecurityLogin with username=SADMIN ...
SecAdptLog Debug 5 000000034dbf2a6c:0 2011-05-03 15:18:35 ODBC security adapter configured: connectstring='SBA_81_DM1_DSN', tableowner='siebel', GlobalConnections=.
DBCLog DBCLogDetail 4 000000034dbf2a6c:0 2011-05-03 15:18:35 Dynamically loading ODBC library functions
DBCLog DBCLogDetail 4 000000034dbf2a6c:0 2011-05-03 15:18:35 Successfully loaded ODBC library functions
SQLTraceAll SQLTraceAll 4 000000034dbf2a6c:0 2011-05-03 15:18:35 (SQLAllocEnv) Env Handle: 150212040, Time: 0.140ms
SQLTraceAll SQLTraceAll 4 000000034dbf2a6c:0 2011-05-03 15:18:35 (SQLAllocConnect) Env Handle: 150212040, Conn Handle: 150215192, Time: 0.044ms
SQLConnectOptions Allocate Connection 4 000000034dbf2a6c:0 2011-05-03 15:18:35 (SQLAllocConnect) Conn Handle: 150215192, Time: 0.044ms
SQLTraceAll SQLTraceAll 4 000000034dbf2a6c:0 2011-05-03 15:18:46 (SQLConnect) Conn Handle: 150215192, Time: 10.184s
DBCLog DBCLogError 1 000000034dbf2a6c:0 2011-05-03 15:18:46 [DataDirect][ODBC 20101 driver][20101]ORA-01017: invalid username/password; logon denied
SecAdptLog Debug 5 000000034dbf2a6c:0 2011-05-03 15:18:46 username=SADMIN : authentication failed due to :
[DataDirect][ODBC 20101 driver][20101]ORA-01017: invalid username/password; logon denied
2. Below messages confirm login with sadmin user-id is working fine.
SecAdptLog Debug 5 000000074dbf2a6c:0 2011-05-03 15:19:06 Invoking SecurityLogin with username=sadmin ...
SecAdptLog Debug 5 000000074dbf2a6c:0 2011-05-03 15:19:06 ODBC security adapter configured: connectstring='SBA_81_DM1_DSN', tableowner='siebel', GlobalConnections=.
SQLTraceAll SQLTraceAll 4 000000074dbf2a6c:0 2011-05-03 15:19:06 (SQLAllocEnv) Env Handle: 150006904, Time: 0.062ms
SQLTraceAll SQLTraceAll 4 000000074dbf2a6c:0 2011-05-03 15:19:06 (SQLAllocConnect) Env Handle: 150006904, Conn Handle: 151411016, Time: 0.011ms
SQLConnectOptions Allocate Connection 4 000000074dbf2a6c:0 2011-05-03 15:19:06 (SQLAllocConnect) Conn Handle: 151411016, Time: 0.011ms
SQLTraceAll SQLTraceAll 4 000000074dbf2a6c:0 2011-05-03 15:19:06 (SQLConnect) Conn Handle: 151411016, Time: 0.046s
SQLTraceAll SQLTraceAll 4 000000074dbf2a6c:0 2011-05-03 15:19:06 (SQLGetInfo) Conn Handle: 151411016, Time: 0.040ms
SQLTraceAll SQLTraceAll 4 000000074dbf2a6c:0 2011-05-03 15:19:06 (SQLSetConnectOption) Conn Handle: 151411016, Time: 0.034ms
SQLConnectOptions Set Connection Option 4 000000074dbf2a6c:0 2011-05-03 15:19:06 (SQLSetConnectOption) Handle: 151411016, Time: 0.034ms
SQLConnectOptions Set Connection Option Detail 5 000000074dbf2a6c:0 2011-05-03 15:19:06 (SQLSetConnectOption) Option: 1041, Param: 1090553352
SQLTraceAll SQLTraceAll 4 000000074dbf2a6c:0 2011-05-03 15:19:06 (SQLSetConnectOption) Conn Handle: 151411016, Time: 0.013ms
SQLConnectOptions Set Connection Option 4 000000074dbf2a6c:0 2011-05-03 15:19:06 (SQLSetConnectOption) Handle: 151411016, Time: 0.013ms
SQLConnectOptions Set Connection Option Detail 5 000000074dbf2a6c:0 2011-05-03 15:19:06 (SQLSetConnectOption) Option: 1042, Param: 1090553361
SecAdptLog Debug 5 000000074dbf2a6c:0 2011-05-03 15:19:06 username=sadmin : authentication succeeded.
SecAdptLog Debug 5 000000074dbf2a6c:0 2011-05-03 15:19:06 username=sadmin : retrieving responsibilities...
Many Thanks,
ChaitanyaHi Chaitanya,
Exactly.
Check for some scheduled batch processes or some repeating jobs which may use this SADMIN Id & Pwd.
Even I have the experienced this SADMIN account locking and I found that one of my repeating job using the SADMIN Id and its locking the ID frequently, even I unlocked the account.
Try cancelling the job and create new one.
Regards,
Guna M -
User Authentication Failed via http BUT not with Visual Administrator !!?
OS : Win 2k3 Server UK * DB : SQL Server 2005
SAP Netweaver 2004s Application Java
Hi All,
Since a couple of days, I have a problem concerning authentication to the java apllication on a SAP Netweaver 2004s.
Using the user Administrator, I CAN logon the Visual Administrator tool, with the same user I tried to logon via http://host:port/nwa without success.
At the beginning, I was thinking about a problem of password then I enabled the emergency user SAP*, the problem was the same. Ok with Visual Administrator but not via http.
Here is two logs found in folder : D:\usr\sap\SID\JC02\j2ee\cluster\server0\log\system\
security.3.log
<i>#1.5#001871E5EA3A00550000006D0000172800043B836D838427#1191335570983#/System/Security/Audit#sap.com/com.sap.security.core.admin#com.sap.security.core.util.SecurityAudit#Guest#0####5aac137070f411dcc513001871e5ea3a#SAPEngine_Application_Thread[impl:3]_11##0#0#Warning#1#com.sap.security.core.util.SecurityAudit#Plain###Guest | LOGIN.ERROR | null | | Login Method=[default], UserID=[Administrator], IP Address=[192.168.10.125], Reason=[Authentication did not succeed.]#</i>
server.0.log
<i>#1.5#001871E5EA3A0052000000130000172800043B835E3661D1#1191335314249#/System/Server/SLDService##com.sap.sldserv.SldServerFrame######c1a349a070f311dcaa68001871e5ea3a#SAPEngine_System_Thread[impl:5]_71##0#0#Warning#1#com.sap.sldserv.SldServerFrame#Plain###Failed to collect SLD data. Failed to send HTTP data: 401 : Unauthorized. Please check if the target SLD system is available and the SLD bridge is started there.#</i>
 I tried to connect http://host:port/sld same problem User Authentication Failed
<b>Do you have an idea for me? Why a user can connect via Visual Administrator and not via the http interface?</b>
Thanks in advance
YvesHi,
I found the solution this last week-end.
This behavior let's thinking to a problem of authentication.
But the problem was in SQL, an index was missing in table J2EE_CONFIG, called J2EE_CONFIG_I3
Cheers
Yves
Maybe you are looking for
-
IMac won't boot to install disk, normally or in safe mode! Please help
Hi everyone, I'm using my iPhone so please excuse any spelling or grammatical errors. I have a 27" quad-core iMac bought about a year ago. Today I went to reformat the harddrive as I'm selling the machine to a friend. First the iMac would not boot to
-
Cant´t find Adobe Director in Adobe Creative Cloud
I have an account for Abobe Creative Cloud but I can´t find the Adobe Director application for download in Adobe Application Manager. Does anyone know if Adobe Director is included with Adobe Creative Cloud?
-
Command-line parameters and dbxtool
Hello, I'm trying to call dbxtool from a script in order to start a debug session. My command line is something like this: dbxtool -E prog -arg1 -arg2 Where "-arg1 -arg2" are arguments accepted by prog. However dbxtool seems to be trying to process t
-
[SOLVED] KDE Plasma 5 | Lock Screen Issues
Everytime my computer locks - whether it be manually or automaticly, I get this lock menu with 3 options. The first option has my username and my avatar, which prompts me for my password. Everytime I type in the correct password, the screen turns bla
-
Download stopped midway and is now lost, how do I get it back?
I had a Digital Copy of the Hunger Games that I had redeemed and was downloading. It got down to 12 minutes from being finished (after probably around 4 hrs) and then iTunes froze and had to be shut down. This caused me to lose the download and I can